← IB Physics · SL · IB Physics revision
⭐ 0
IB Diploma Physics SL · E.4 Fission
Mini-Lesson

Fission

1 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1Splitting a uranium nucleus gives out energy. How can breaking something apart release energy?
Mission 1

Mission 1: Splitting a uranium nucleus gives out energy. How can breaking something apart release energy?

Make a guess: Splitting a uranium nucleus gives out energy. How can breaking something apart release energy?

Mission 1

Nuclear fission

Induced fissionneutronuranium-235uranium-236(unstable,wobbles)barium-141krypton-923 neutronsnucleons: 235 + 1 = 141 + 92 + 3Not to scale.
  • Fission: a heavy nucleus splits into two smaller nuclei of comparable mass, plus a few neutrons (2 or 3 for uranium-235).
  • Spontaneous fission: no trigger (e.g. californium-252). Rare for most nuclei.
  • Induced fission: the nucleus absorbs a neutron first.
  • ²³⁵92U + ¹0n → ²³⁶92U → ¹⁴¹56Ba + ⁹²36Kr + 3 ¹0n
  • Balance it: nucleon numbers 235 + 1 = 141 + 92 + 3(1) = 236; proton numbers 92 = 56 + 36.
Quick check
?Some very heavy nuclides, such as californium-252, can undergo spontaneous fission, whereas uranium-235 in a reactor undergoes neutron-induced fission. Which statement about spontaneous fission is correct?
Mission 1

Where the energy comes from

Up the curve66.577.588.59050100150200250Binding energy per nucleon / MeVNucleon number Auranium-236:about 7.6 MeVfragments: about 8.5 MeV(krypton-92, barium-141)Vertical axis starts at 6 MeV. Data: AME2020atomic mass evaluation.
  • Heavy nuclei sit right of the peak on the binding energy per nucleon curve: about 7.6 MeV.
  • The fragments sit nearer the peak: about 8.5 MeV. More tightly bound.
  • More binding → less total mass → the mass difference is released: E = Δmc².
  • About 200 MeV per fission, mostly as kinetic energy of the fragments; the rest as neutrons, γ photons and later decays.
Mission 1

Worked example: energy from one fission

  • ²³⁵U + n → ¹⁴¹Ba + ⁹²Kr + 3n. Masses (u): ²³⁵U 235.043928; ¹⁴¹Ba 140.914403; ⁹²Kr 91.926173; n 1.008665.
  • Before: 235.043928 + 1.008665 = 236.052593 u.
  • After: 140.914403 + 91.926173 + 3(1.008665) = 235.866571 u.
  • Δm = 0.186022 u → × 931.5 = 173 MeV (2.77 × 10⁻¹¹ J).
  • Count the neutrons on both sides. Atomic masses: electrons cancel.
  • 1 kg of uranium-235 (if every nucleus split, at about 200 MeV each): about 8 × 10¹³ J.
Quick check
?A uranium-235 nucleus absorbs a neutron and splits into two fragments and 2 free neutrons. The fragments contain 234 nucleons in total. The binding energy per nucleon is 7.6 MeV for uranium-235 and about 8.5 MeV for the fragments. A free neutron has no binding energy. Roughly how much energy is released?
Mission 1

Chain reaction and critical mass

Chain reactionsMore than one: rate growshere each fission causes 2 more1 → 2 → 4 …Exactly one: steady rateone neutron per fission causes another1 → 1 → 1 …Less than one: chain dies awayits neutrons are all lost1 → 1 → 0fissioncauses fissionlost
  • Each fission releases 2–3 neutrons. Each can cause another fission: a chain reaction.
  • On average more than one neutron per fission causes fission: rate grows (a bomb).
  • Exactly one: steady rate (a reactor).
  • Less than one: the chain dies away.
  • Neutrons are lost through the surface. A small lump loses too many.
  • Critical mass: the minimum mass of fuel that sustains a chain reaction.
Quick check
?In a reactor core, each fission of uranium-235 releases 2.5 neutrons on average. Of these, on average 0.7 escape from the core and 0.8 are absorbed by the control rods and other materials without causing fission. What happens to the rate of fission?
Quick check
?Predict first. In a gas-cooled reactor, the uranium fuel rods sit in channels through a large block of graphite, which is the moderator. Carbon dioxide gas carries thermal energy from the core. What is the role of the graphite?
Mission 1

Inside a thermal reactor

Thermal reactorwaterheatexchangersteamturbine,generatorcoolantcontrol rods (move in and out)fuel rodsmoderatorconcrete and steel shieldSchematic, not to scale.
  • Fuel rods: uranium enriched in uranium-235.
  • Moderator (water, graphite): slows fast neutrons by collisions. Slow (thermal) neutrons are far more likely to cause fission of uranium-235.
  • Control rods (boron, cadmium): absorb neutrons. Push in → fewer fissions → less power.
  • Coolant (water, carbon dioxide gas): carries thermal energy out of the core.
  • Heat exchanger: the coolant heats a separate water circuit; its steam drives the turbine.
  • Shielding: thick steel and concrete absorb neutrons and γ rays from the core.
Mission 1

Fission products and waste

Spent fuel time line110102103104105106time after removal / years (log scale)cooling ponddry storagedeep undergroundcaesium-137,strontium-90:half-life ≈ 30 yearstechnetium-99:half-life 2.1 × 105 yearsSpent fuel: where it goes, how long it lastsStage lengths are indicative and vary betweencountries.
  • Fragments are neutron-rich: they decay by β⁻ (and γ), often in long chains.
  • Spent fuel is intensely radioactive and hot: its decays keep releasing energy.
  • Half-lives range from seconds to hundreds of thousands of years (e.g. technetium-99: 2.1 × 10⁵ years).
  • Spent fuel cools in water ponds for years, then goes to dry storage.
  • Long-term plan: seal it in stable form and bury it deep underground in stable rock.
  • Risks to manage: leaks into groundwater, heat, and keeping records and security over thousands of years.
Quick check
?High-level waste from a reactor contains caesium-137, a fission product with a half-life of 30 years. The waste is kept in a store for 90 years. What percentage of the initial caesium-137 activity remains at the end of this time?
Mission check

?Plutonium-240 nuclei can split on their own into two fragments and two free neutrons. In one such split, the total binding energy rises from about 1810 MeV (the plutonium nucleus) to about 2010 MeV (the two fragments). How much energy is released, and why?
Recap

The big ideas

Mission 1

  • Fission: a heavy nucleus splits into two smaller nuclei plus neutrons; spontaneous or neutron-induced.
  • Energy is released because the fragments are more tightly bound: less total mass, E = Δmc², about 200 MeV per fission.
  • A steady chain reaction needs, on average, one neutron per fission to cause another; moderator slows neutrons, control rods absorb them, coolant carries energy away, shielding absorbs neutrons and γ.
  • Fission products are β⁻-emitting, hot and long-lived: cooled for years, then stored deep underground.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Fission for IB Physics SL. 🎉

  1. Mission 1Splitting a uranium nucleus gives out energy. How can breaking something apart release energy?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to IB Physics · SL