← AP Physics C: Mechanics
⭐ 0
AP Physics C: Mechanics · Unit 1: Kinematics
Mini-Lesson

AP® Physics C: Mechanics Unit 1: Kinematics

7 missions. Guess, learn, then check. Your place is saved.

Covers College Board topics 1.1–1.5

Short, curiosity-driven missions (about 20 minutes each) that teachers can assign. Use them alongside AP Classroom practice.

  1. Mission 1When does 3 + 4 = 5 in physics?
  2. Mission 2A runner finishes a lap exactly where she started. What was her average velocity?
  3. Mission 3On a velocity–time graph, where is the distance covered hiding?
  4. Mission 4A dropped stone falls a distance d in its first second. How far does it fall in the next second?
  5. Mission 5On a fast train, you throw a ball forward. How fast is the ball moving?
  6. Mission 6Fire a bullet horizontally and drop another at the same instant. Which hits the ground first?
  7. Mission 7If an object's acceleration keeps changing, how can you work out where it ends up?

AP® is a trademark registered by the College Board, which is not affiliated with, and does not endorse, this website.

Mission 1Topics 1.1, 1.5

Mission 1: When does 3 + 4 = 5 in physics?

Make a guess: When does 3 + 4 = 5 in physics?

Mission 1

Scalars and vectors

Scalars and vectorsScalarmagnitude onlyVectormagnitude and directiondistancepositionspeeddisplacementmassvelocitytimeaccelerationenergyforcetemperaturemomentumvelocity vlength ∝ magnitudepoints in itsdirection
  • Scalar: magnitude (size) only. Vector: magnitude and direction.
  • Scalars: distance, speed, mass, time, energy, temperature.
  • Vectors: displacement, velocity, acceleration, force, momentum.
  • Position is a vector too.
  • Draw a vector as an arrow: length ∝ magnitude, pointing in its direction.
  • Symbol with an arrow, v. Its magnitude: v or |v|.
Quick check
?A student records four facts about a school bus trip. Which fact describes a vector quantity?
Mission 1

Adding along a line

Adding along a line−50+3← west (−)east (+) →+3 m−8 mresultant −5 m(5 m west)start
  • Choose a positive direction. The opposite direction is negative.
  • 3 m east, then 8 m west. East positive: +3 + (−8) = −5 m, i.e. 5 m west.
  • The sign gives the direction, not the size: −5 m is 5 m long.
  • Two 5 N forces: same direction → 10 N. Opposite directions → 0 N.
Quick check
?A hiker walks 5 m east and then 9 m west along a straight path. Student 1 takes east as the positive direction; Student 2 takes west as the positive direction. Each finds the hiker's resultant displacement as a signed component. Which statement correctly compares their results?
Mission 1

Adding at right angles

Adding at right angles53°3.0 N east4.0 N north5.0 NN= 1.0 N (to scale)
  • Draw the vectors tip to tail. The resultant runs from the first tail to the last tip.
  • 3.0 N east + 4.0 N north:
  • Size: √(3.0² + 4.0²) = 5.0 N.
  • Direction: tan θ = 4.0 ÷ 3.0 → θ = 53° north of east.
  • So 3 + 4 = 5, but only for vectors at right angles.
  • Other angles: resolve each vector into components, add the components.
Mission 1

Resolving into components

Resolving a vectorθ = 30°F = 20 NF cos θ = 17.3 NF sin θ= 10.0 NDashed: the two components. Together theyreplace F.
  • Any vector = two perpendicular components.
  • F at angle θ to the horizontal:
  • Horizontal: F cos θ (side adjacent to θ).
  • Vertical: F sin θ (side opposite θ).
  • 20 N at 30°: 20 cos 30° = 17.3 N; 20 sin 30° = 10.0 N.
  • The two components together replace the original vector.
  • Adding at any angle: add the x-components, add the y-components, then use the Pythagorean theorem.
  • Motion in 2D: treat x and y as two independent 1D problems.
Mission 1

Components on a slope

Components on a slopeθθ= mggFmg cos θmg sin θ
  • Choose axes along and perpendicular to the slope.
  • Slope at angle θ: the angle between the weight and the perpendicular to the slope is also θ.
  • Gravitational force Fg = mg. Along the slope: mg sin θ. Into the slope: mg cos θ.
  • Different axes give different components, but they add to the same vector.
Quick check
Vector diagram. Horizontal x axis and vertical y axis meet at the origin, where a ball is drawn. An arrow labeled v starxyθv
?The diagram shows the velocity of a ball just after it is kicked, drawn with its tail at the origin of an x-y coordinate system with x horizontal and y vertical. The velocity has magnitude v and makes an angle θ with the vertical y-axis. Which expression gives the horizontal component vx of the velocity?
Mission 1

The dot product

The dot productBAθA cos θA · B = (A cos θ) × B = AB cos θA scalar: a number, no direction.
  • A · B = AB cos θ, θ the angle between the vectors.
  • In components: A · B = AₓBₓ + AyBy (+ AzBz).
  • The result is a scalar.
  • Perpendicular: A · B = 0. Parallel: A · B = AB.
  • Use: work, W = F · Δr (Unit 3).
Quick check
?A = 3î + 4ĵ and B = 2î − ĵ (in the same units). What is A · B?
Mission check

?A robot vacuum moves 1.1 m east and then 1.6 m north, each along a straight line. What is the magnitude of its displacement from its starting point?
Mission 2Topics 1.1, 1.2

Mission 2: A runner finishes a lap exactly where she started. What was her average velocity?

Make a guess: A runner finishes a lap exactly where she started. What was her average velocity?

Mission 2

Position, displacement, distance

Distance and displacement01020304050x (m)origin40 m out10 m backDistance (path) = 40 m + 10 m = 50 mx₀xΔx = x − x₀= +30 m (outward)
  • Model the moving thing as an object: a point carrying all its mass.
  • Position: where it is, measured from an origin along an axis. The sign shows which side.
  • Displacement: the change in position. A vector.
  • Δx = x − x0
  • Distance: total length of the path. A scalar, never negative.
  • 40 m out, 10 m back: distance 50 m; displacement 30 m outward.
Quick check
?A runner moves along a straight track. Her position x is measured from a marker on the track. She starts at x = +30 m, runs to x = +70 m, then turns around and runs to x = −20 m, where she stops. What is her displacement?
Mission 2

Speed and velocity

One lapstart and finishone lapdistance = lap lengthdisplacement Δx = 0
  • Average speed = total distance ÷ total time. A scalar.
  • Average velocity = displacement ÷ time. A vector, in the direction of the displacement.
  • vavg = Δx/Δt
  • Unit: m/s.
Mission 2

Acceleration

Velocity and acceleration directionspositivevelocity vacceleration av +, a +speeding upv +, a −slowing downv −, a −speeding upv −, a +slowing down
  • Acceleration = rate of change of velocity. Unit: m/s².
  • aavg = Δv/Δt
  • Velocity changes if the speed or the direction changes. A ball that bounces straight back at the same speed has accelerated.
  • a in the same direction as v: speeding up. Opposite: slowing down.
  • A negative acceleration does not always mean slowing down.
Quick check
?An object moves along a straight line, with positive taken to the right. At one instant its velocity is −3.0 m/s and its acceleration is +2.0 m/s². The acceleration stays constant. Which describes the motion of the object?
Mission 2

Average and instantaneous

Photogatetrackglidercard, length Lvphotogatebeam crossesthe tracktimerΔtv ≈ L ÷ Δt
  • Average value: over a time interval.
  • Average velocity and average acceleration use only the initial and final states.
  • Average speed uses the whole path: total distance ÷ total time.
  • Instantaneous value: at one instant.
  • The average over a very short interval approximates the instantaneous value.
  • A speedometer shows instantaneous speed.
  • A card of length L passes a photogate in time Δt: v ≈ L ÷ Δt.
  • Uniform acceleration: velocity changes by the same amount every second. Non-uniform: the acceleration itself changes.
Quick check
Data table with two rows. Row t (s): 2.00, 2.01, 2.10, 3.00. Row x (m): 30.0000, 30.2005, 32.0500, 55.0000, the object'st (s)2.002.012.103.00x (m)30.000030.200532.050055.0000
?The table shows the position x of an object moving along a straight line at four instants. Which value is the best estimate of the object's instantaneous velocity at t = 2.00 s?
Mission 2

Worked example

  • A cyclist rides 600 m north in 120 s, then 200 m south in 40 s.
  • Distance = 600 + 200 = 800 m. Displacement = 600 − 200 = 400 m north.
  • Time = 160 s.
  • Average speed = 800 ÷ 160 = 5.0 m/s.
  • Average velocity = 400 ÷ 160 = 2.5 m/s north.
  • Both legs are at 5.0 m/s, but the velocity changes: north, then south.
Quick check
Velocity arrows for four carts, one row for each, in two columns headed t = 0 and t = 2.0 s. Each arrow is labeled with t = 0t = 2.0 sPQRS3 m/s3 m/s2 m/s6 m/s6 m/s1 m/s7 m/s7 m/s+x
?The diagram shows the velocities of four carts, P, Q, R and S, moving along straight tracks, at t = 0 and at t = 2.0 s. The positive direction is to the right, and each arrow is labeled with its speed. Which cart has the greatest magnitude of average acceleration between t = 0 and t = 2.0 s?
Mission check

?A car travels 3.0 km along a straight road at a constant speed of 10 m/s, then returns along the same road to its starting point at a constant speed of 15 m/s. What are its average speed and its average velocity for the whole journey?
Mission 3Topic 1.3

Mission 3: On a velocity–time graph, where is the distance covered hiding?

Make a guess: On a velocity–time graph, where is the distance covered hiding?

Mission 3

Position–time graphs

Position–time graph shapesx (m)t (s)at restslope = 0x (m)t (s)constant velocityslope = velocityx (m)t (s)negative velocitynegative slopex (m)t (s)velocity changingslope of tangent
  • Position–time (x–t) graph.
  • Slope = velocity.
  • Straight line: constant velocity. Steeper: faster. Horizontal: at rest.
  • Negative slope: moving in the negative direction.
  • Curve: velocity changing. Slope of the tangent = instantaneous velocity.
Mission 3

Motion diagrams

Motion diagramsDots: positions at equal time intervalsconstant velocityva = 0speeding upvaslowing downva
  • Dots show the object's position at equal time intervals.
  • Equal spacing: constant velocity. Spacing grows: speeding up. Spacing shrinks: slowing down.
  • Acceleration points the way the velocity is changing.
  • Narrative, motion diagram, graph and equation: four views of one motion. Translate between them.
Quick check
Position–time graph with x (m) on the vertical axis and t (s) on the horizontal axis. A smooth curve leaves the origin hx (m)t (s)ABC1471.568
?The graph shows the position x of an object moving along a straight line as a function of time t. Points A, B and C are on the curve; the curve is horizontal at B. Which ranks the object's speeds at A, B and C, from greatest to least?
Mission 3

Velocity–time graphs

Areas on a velocity–time graphv (m/s)t (s)+5−501342+−v = 0: reversesdisplacement = area above − area belowdistance = area above + area below
  • Slope = acceleration. Straight line: uniform acceleration. Curve: non-uniform.
  • Area between the line and the time axis = displacement.
  • Area below the axis: negative displacement (moving backward).
  • Distance = total area, every part counted as positive.
  • Line crosses the time axis: velocity zero, the object reverses.
  • Slope = dv/dt; area = ∫v dt.
Mission 3

Worked example

  • A car: 0 to 12 m/s in 4.0 s; steady 12 m/s for 6.0 s; then to rest in 3.0 s.
  • Accelerations: 12 ÷ 4.0 = 3.0 m/s²; 0; −12 ÷ 3.0 = −4.0 m/s².
  • Displacement = area: ½ × 4.0 × 12 + 6.0 × 12 + ½ × 3.0 × 12
  • = 24 + 72 + 18 = 114 m.
  • Average velocity = 114 ÷ 13.0 = 8.8 m/s.
Quick check
Velocity–time graph with v (m/s) on the vertical axis and t (s) on the horizontal axis. The vertical axis is marked 12, v (m/s)t (s)123412−40
?The graph shows the velocity v of an object moving along a straight line as a function of time t. A student claims that the object's acceleration is zero at t = 3 s, because the object is at rest at that instant. Which statement correctly evaluates the claim?
Mission 3

Curved velocity–time graphs

Counting squares and drawing a tangentv (m/s)t (s)02462468ΔtΔvArea: count the squares under the curve.1 square = 1 m/s × 1 s = 1 mAcceleration at a point = slope of thetangent = Δv/ΔtIllustrative curve.
  • Area under a curve: count squares. One square = (velocity per square) × (time per square).
  • Count part-squares as halves, or split the area into strips (trapezoids).
  • Grid of 1 m/s × 1 s squares: 38 squares → about 38 m.
  • Acceleration at a point: draw a long tangent, take its slope.
Quick check
Velocity–time graph with v (m/s) on the vertical axis and t (s) on the horizontal axis; no values are marked except 0 atv (m/s)t (s)0
?The graph shows the velocity v of a car as a function of time t as the car pulls away from rest along a straight, level road. Which statement describes the car's motion during the time shown?
Mission 3

Acceleration–time graphs

Area under an acceleration–time grapha (m/s²)t (s)at₁t₂Δtarea = Δv= a × ΔtUnits: (m/s²) × (s) = m/s
  • Area under an a–t graph = change in velocity.
  • Horizontal line: uniform acceleration. Line on the time axis: constant velocity.
  • Final velocity = starting velocity + area. You need the starting velocity.
  • Area below the axis: a negative change in velocity.
Quick check
Acceleration–time graph with a (m/s²) on the vertical axis, marked 3.0 and −1.5, and t (s) on the horizontal axis, markea (m/s²)t (s)12343.0−1.5
?The graph shows the acceleration a of a cart moving along a straight track as a function of time t. At t = 0 the cart's velocity is −1.0 m/s. What is the cart's velocity at t = 4 s?
Mission check

Velocity–time graph with v (m/s) on the vertical axis, marked 6, 3 and −3, and t (s) on the horizontal axis, marked 1, 2v (m/s)t (s)12363−3
?The graph shows the velocity v of an object moving along a straight line as a function of time t. What is the object's displacement from t = 0 to t = 3 s?
Mission 4Topic 1.3

Mission 4: A dropped stone falls a distance d in its first second. How far does it fall in the next second?

Make a guess: A dropped stone falls a distance d in its first second. How far does it fall in the next second?

Mission 4

Five quantities, one condition

The five quantitiespositive (+)vx0 initial velocityvx final velocityax accelerationaxx0xΔx = x − x0 displacementt = 0t timeConstant acceleration in the + direction: thevelocity grows, the acceleration stays thesame. Velocity arrows to scale.
  • Use these equations only when the acceleration is constant: same size, same direction, along a straight line.
  • Δx = x − x0 displacement · vx0 initial velocity · vx final velocity · ax acceleration · t time.
  • Every quantity except t has a direction along the line: pick a positive direction and give each one a sign.
Mission 4

The equations

  • vx = vx0 + ax t (no Δx)
  • x = x0 + vx0 t + ½ax t² (no vx)
  • vx² = vx0² + 2ax(x − x0) (no t)
  • Choose the equation that leaves out the quantity you neither know nor want.
Mission 4

Worked example

  • A cyclist moving at 4.0 m/s accelerates uniformly at 1.5 m/s² for 6.0 s. Find the final velocity and the displacement.
  • Known: vx0 = 4.0 m/s, ax = 1.5 m/s², t = 6.0 s. Want: vx, Δx.
  • vx = vx0 + ax t = 4.0 + 1.5 × 6.0 = 13 m/s
  • Δx = vx0 t + ½ax t² = 4.0 × 6.0 + ½ × 1.5 × 6.0² = 24 + 27 = 51 m
  • Check with the third equation: 13² = 4.0² + 2 × 1.5 × 51 → 169 = 169 ✓
Quick check
?A car traveling at 16 m/s brakes with uniform deceleration and comes to rest in 4.0 s. What distance does the car travel while braking?
Mission 4

Free fall

Ball thrown upwardv = 0, a = grisingfallingvelocityacceleration gImages at equal time intervals; air resistancenegligible. Velocity arrows to scale.
  • Free fall: gravity is the only force acting (air resistance negligible).
  • Acceleration = g, downward, the same for every mass.
  • Take g = 10 m/s² near Earth's surface.
  • A ball thrown upward has acceleration g downward while rising, at the top and while falling.
  • At the top its velocity is zero; its acceleration is not.
Quick check
?A cart moves up a straight ramp, slowing down at a steady rate. It turns around at its highest point and then speeds up at the same steady rate as it rolls back down. The direction up the ramp is positive. Which description matches the cart's velocity–time graph?
Mission 4

Worked example: thrown upward

  • A ball is thrown straight up at 12.0 m/s. How high does it rise, and when does it reach the top?
  • Take up as positive: vy0 = +12.0 m/s, ay = −g. At the top, vy = 0.
  • Height: 0 = vy0² − 2gΔy → Δy = vy0²/2g
  • Time: 0 = vy0 − gt → t = vy0/g
  • Δy = 12.0² ÷ (2 × 10) = 7.20 m · t = 12.0 ÷ 10 = 1.20 s
Mission check

?A toy car is released from rest on a straight slope and speeds up with constant acceleration. It travels 0.60 m in the first 2.0 s. How far does it travel between t = 4.0 s and t = 6.0 s?
Mission 5Topic 1.4

Mission 5: On a fast train, you throw a ball forward. How fast is the ball moving?

Make a guess: On a fast train, you throw a ball forward. How fast is the ball moving?

Mission 5

Who is measuring?

  • A reference frame is an observer with a ruler and a clock.
  • Position and velocity are measured relative to a frame.
  • Different frames can give different values, all correct.
  • No frame is "the true one". Always say which frame you mean.
Mission 5

Adding velocities in a line

Ball on a train+Thrown forwardtrain frameground framev(train rel. ground) = +30 m/sv(ball rel. train) = +10 m/sv(ball rel. ground) = +40 m/sThrown backwardv(train rel. ground) = +30 m/sv(ball rel. train) = −10 m/sv(ball rel. ground) = +20 m/sArrows to scale. v(ball rel. ground) = v(ballrel. train) + v(train rel. ground).
  • v(ball rel. ground) = v(ball rel. train) + v(train rel. ground)
  • Choose a positive direction. Train: +30 m/s relative to the ground.
  • Ball thrown forward at +10 m/s relative to the train → +40 m/s relative to the ground.
  • Thrown backward (−10 m/s) → +20 m/s relative to the ground.
Quick check
?A cyclist rides east at 6 m/s relative to the road. Observer X stands beside the road. Observer Y is in a car that moves east along the same road at a constant 10 m/s. Which statement correctly compares the cyclist's velocity as measured by Y with the velocity measured by X?
Mission 5

Acceleration is the same in both frames

  • Two frames moving at constant velocity relative to each other.
  • Every velocity measured in one differs by the same constant from the other.
  • So every change in velocity is the same → the acceleration is the same in both frames.
  • A ball dropped in a steady train falls with acceleration g for the passenger and for the platform.
Quick check
Data table with three rows and four columns of values. Row t (s): 0, 1.0, 2.0, 3.0. Row G: v (m/s), the velocity measuret (s)G: v (m/s)R: v (m/s)01.02.03.01.03.05.07.0−4.0−2.002.0
?A cart moves along a straight track, speeding up relative to the track. Observer G stands beside the track. Observer R rides on a platform that moves along the track at constant velocity. The table shows the cart's velocity v measured by each observer at four instants t. Which claim is supported by the data?
Mission 5

Relative velocity in two dimensions

Plane in a crosswind14.0°80 m/s northv(plane rel. air)20 m/s eastv(air rel. ground)82.5 m/s at 14.0°east of northv(plane rel. ground)Nv(plane rel. ground) = v(plane rel. air) +v(air rel. ground)Arrows to scale.
  • The same rule, now with vectors: v(plane rel. ground) = v(plane rel. air) + v(air rel. ground).
  • A plane flies at 80 m/s north relative to the air. Wind: 20 m/s east.
  • Ground velocity: √(80² + 20²) = 82.5 m/s, at tan⁻¹(20/80) = 14.0° east of north.
  • Add components separately: x with x, y with y.
  • To travel straight across a river, a boat must head partly upstream.
Quick check
Top view of a river flowing to the right between two straight, parallel banks, each labeled bank, 60 m apart (marked wit60 mcurrent3.0 m/s5.0 m/srelative to waterboatbankbank
?The diagram shows a boat crossing a river with a steady current. The boat is steered upstream at an angle so that it moves straight across the river, along the dashed line. How long does the boat take to cross the river?
Mission check

?A moving walkway in an airport moves at constant velocity vW relative to the floor. A passenger walks on the walkway with velocity vP relative to the walkway. A worker walks on the floor beside the walkway at constant velocity vF relative to the floor. All three velocities are components along the same straight line. Which expression gives the passenger's velocity as measured by the worker?
Mission 6Topic 1.5

Mission 6: Fire a bullet horizontally and drop another at the same instant. Which hits the ground first?

Make a guess: Fire a bullet horizontally and drop another at the same instant. Which hits the ground first?

Mission 6

Two motions, one clock

Dropped and launched togetherdroppedlaunched horizontallyggImages at equal time intervals; air resistancenegligible.
  • No air resistance: the only force is weight, straight down.
  • Horizontally: no force → constant velocity.
  • Vertically: acceleration g downward → free fall.
  • The two motions are independent. They share only the time, t.
  • The same holds in 3D: changing the motion along one axis leaves the others unchanged.
Mission 6

Launched horizontally

Horizontal launch0.80 m1.0 m2.5 m/shorizontal component: constantvertical component: growsvelocityDrawn to scale with g = 10 m/s². Velocityarrows to scale; points at 0, 0.15 s and0.30 s; lands at 0.40 s.
  • A ball rolls off a table 0.80 m high at 2.5 m/s. Where does it land?
  • Vertical first: it starts with zero vertical velocity. 0.80 = ½gt².
  • t = √(2 × 0.80 ÷ 10) = 0.40 s
  • Then horizontal: x = 2.5 × 0.40 = 1.0 m from the table.
  • Recipe: find t from the vertical motion; use it in the horizontal motion.
Quick check
?A ball rolls off the edge of a horizontal ledge 1.8 m above the floor with a horizontal speed of 4.0 m/s. Air resistance is negligible. Use g = 10 m/s². What is the horizontal distance from the edge of the ledge to the point where the ball lands on the floor?
Mission 6

Launched at an angle

Angled launchResolve at the startθv0vx0 = v0 cos θvy0 = v0 sin θBelow thehorizontalvy0downThe path over level groundvx0top: vy = 0v0max heightrangePath drawn to scale for a 35° launch, no airresistance. Velocity arrows to scale.
  • Launch at a given speed and angle θ to the horizontal. Resolve at the start:
  • horizontal vx0 = v0 cos θ · vertical vy0 = v0 sin θ
  • Horizontal component: never changes.
  • Vertical component: changes by g every second, as in free fall.
  • Below the horizontal: the vertical component starts downward. Watch the sign.
Mission 6

The top and the landing

  • At the highest point: vertical velocity = 0. Velocity = the horizontal component, not zero.
  • Acceleration at the top: still g downward.
  • Over level ground (no air resistance): the path is symmetrical. Time up = time down.
  • Range = horizontal velocity × total time of flight.
Mission 6

Worked example: a kicked ball

  • A ball is kicked at 18.0 m/s, 35.0° above level ground. Find the maximum height and the range.
  • Horizontal: 18.0 cos 35.0° = 14.7 m/s. Vertical: 18.0 sin 35.0° = 10.3 m/s.
  • Top: vertical velocity 0 → time to top = 10.3/g; height = 10.3²/2g.
  • Landing (level ground): time of flight = 2 × time to top. Range = 14.7 × time of flight.
  • g = 10 m/s²: top at 1.03 s · height 5.33 m · flight 2.06 s · range 30.4 m
  • Unrounded values carried through; round only at the end.
Quick check
Two velocity–time graphs, one above the other, each with t (s) on the horizontal axis marked 1, 2, 3 and 4. Upper graph:vx (m/s)vy (m/s)t (s)t (s)60200−2011223344
?A ball is launched into the air. The horizontal and vertical components of its velocity, vx and vy, are shown as functions of time t in the graphs, with upward positive. Air resistance is negligible. Which claim about the ball's motion is supported by the graphs?
Quick check
?A ball is thrown from the top of a vertical cliff 25 m above the sea, with speed 20 m/s at 37° above the horizontal (sin 37° = 0.60, cos 37° = 0.80). Air resistance is negligible. Use g = 10 m/s². How long after it is thrown does the ball reach the sea?
Mission check

?Ball X is thrown horizontally at 8.0 m/s from a height of 5.0 m above level ground. At the same instant, ball Y is dropped from rest from a height of 20 m. Air resistance is negligible. How does the time Y takes to reach the ground compare with the time X takes?
Mission 7Topics 1.1–1.3, 1.5

Mission 7: If an object's acceleration keeps changing, how can you work out where it ends up?

Make a guess: If an object's acceleration keeps changing, how can you work out where it ends up?

Mission 7

Vectors with unit vectors

Unit vectors and a position vectorxyzîĵk̂rr = 1.0î − 2.0ĵ + 2.0k̂|r| = √(1.0² + 2.0² + 2.0²) = 3.0î, ĵ, k̂: magnitude 1, no unit
  • î, ĵ, k̂: unit vectors along x, y, z. Magnitude 1, no unit.
  • Position vector: r = xî + yĵ + zk̂.
  • Magnitude: |r| = √(x² + y² + z²).
  • Add or subtract component by component: x with x, y with y, z with z.
Mission 7

Instantaneous values are limits

Secants approaching the tangentx (m)t (s)tsecants: Δx/Δt over smaller Δttangent: slope = vx at t
  • Average velocity over Δt: Δr/Δt.
  • Shrink Δt toward zero: the average approaches the instantaneous velocity, v = dr/dt.
  • Likewise a = dv/dt.
  • On an x–t graph: vx is the slope of the tangent at that instant.
Mission 7

Differentiate: position to velocity to acceleration

  • x(t) = 2.0t³ − 3.0t² (x in m, t in s).
  • vx = dx/dt = 6.0t² − 6.0t
  • ax = dvx/dt = 12t − 6.0
  • At t = 2.0 s: x = 16 − 12 = 4.0 m · vx = 24 − 12 = 12 m/s · ax = 24 − 6.0 = 18 m/s²
  • ax changes with time, so the constant-acceleration equations do not apply.
Quick check
?An object moves along the x-axis with velocity vx(t) = (2.0 m/s³)t² − (2.0 m/s²)t. What is its acceleration ax at t = 2.0 s?
Mission 7

Integrate back, with starting values

  • vx(t) = vx0 + ∫0ᵗ ax dt · x(t) = x0 + ∫0ᵗ vx dt
  • Integrating gives a function only up to a constant: you need the starting value.
  • Example: ax = 6.0 − 3.0t (ax in m/s², t in s): the push fades. At t = 0, vx0 = 2.0 m/s and x0 = 1.0 m.
  • vx = 2.0 + 6.0t − 1.5t² · x = 1.0 + 2.0t + 3.0t² − 0.50t³
  • At t = 2.0 s: vx = 2.0 + 12 − 6.0 = 8.0 m/s · x = 1.0 + 4.0 + 12 − 4.0 = 13 m
Quick check
?A cart's velocity along the x-axis is vx = (3.0 m/s³)t² for t ≥ 0. At t = 0 the cart is at x = 2.0 m. Where is it at t = 2.0 s?
Mission 7

Slopes and areas

Linked x, v and a graphsx (m)t (s)−124vx (m/s)t (s)612ax (m/s²)t (s)−6612180.511.52turning point, −1.0 m4.0 mvx = 0area = −1.0 m12 m/s18 m/s²
  • Slope of x–t → vx · slope of vx–t → ax.
  • Area under vx–t → Δx · area under ax–t → Δvx.
  • Area below the time axis counts as negative.
  • Where vx = 0 the x–t graph is flat: a stationary point. It is a turning point if vx changes sign there.
Quick check
Velocity–time graph with v (m/s) on the vertical axis, marked 3 and 6, and t (s) on the horizontal axis, marked 1 to 6. v (m/s)t (s)12345636
?The graph shows the velocity v of an object moving along a straight line as a function of time t. Which description of the object's position–time (x–t) graph from t = 0 to t = 6 s is correct?
Mission 7

Each direction on its own

A path built from its componentsx (m)y (m)1.20.80t = 0t = 0.4 s: topt = 0.8 s, x = 2.4 mvelocity (red), to scale, in m/s:3.0î + 4.0ĵ, then 3.0î, then 3.0î − 4.0ĵhorizontal part (green): 3.0 m/s at every point
  • Differentiate each component separately.
  • r(t) = (3.0t)î + (4.0t − 5.0t²)ĵ (r in m, t in s)
  • v = 3.0î + (4.0 − 10t)ĵ · a = −10ĵ m/s²
  • x: constant velocity. y: constant acceleration. A projectile!
  • In general ax and ay can differ and can each change with time.
  • It lands (y = 0 again) at t = 0.80 s: v = 3.0î − 4.0ĵ, so speed = √(3.0² + 4.0²) = 5.0 m/s.
Quick check
?A drone moving in a horizontal plane has position r(t) = (1.5 m/s²)t² î + (2.0 m/s)t ĵ. What is the drone's speed at t = 2.0 s?
Mission check

?An object moves along the x-axis with acceleration ax(t) = kt, where k is a positive constant. At t = 0 it is at x = 0 with velocity v0. What is its position x(t)?
Recap

The big ideas

Mission 1

  • Vectors have direction: in a line, signs show it; at right angles, combine by the Pythagorean theorem and tan θ.
  • Resolve: F cos θ along the side adjacent to θ, F sin θ along the opposite side.
  • Any angle: add components.
  • A · B = AB cos θ, a scalar.

Mission 2

  • Distance and speed are scalars; displacement, velocity and acceleration are vectors.
  • Average velocity = displacement ÷ time; average speed = distance ÷ time. Return to the start: average velocity zero.
  • Acceleration = Δv/Δt: a change of speed or of direction. Instantaneous = average over a very short interval.

Mission 3

  • Position–time graph: slope = velocity. v–t graph: slope = acceleration, area = displacement.
  • a–t graph: area = change in velocity.
  • Curves: tangent for instantaneous values.
  • Curves: count squares for the area.

Mission 4

  • Constant acceleration only: choose the constant-acceleration equation that leaves out the quantity you neither know nor want; give every vector a sign.
  • Free fall: a = g ≈ 10 m/s², downward, at every point of the flight, including the top.

Mission 5

  • Velocity relative to the ground = velocity relative to the moving frame + velocity of that frame; acceleration is the same in frames moving at constant velocity relative to each other.

Mission 6

  • Projectile, no air resistance: horizontal velocity constant, vertical acceleration g; the two share only the time t.
  • Resolve the launch velocity; at the top the vertical velocity is zero but the speed is not.

Mission 7

  • v = dr/dt and a = dv/dt; going back, integrate and add the starting value (v0, then x0).
  • Slopes of x–t and v–t graphs give v and a; areas under v–t and a–t give Δx and Δv. Treat each component separately.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Kinematics for AP Physics C: Mechanics. 🎉

  1. Mission 1When does 3 + 4 = 5 in physics?
  2. Mission 2A runner finishes a lap exactly where she started. What was her average velocity?
  3. Mission 3On a velocity–time graph, where is the distance covered hiding?
  4. Mission 4A dropped stone falls a distance d in its first second. How far does it fall in the next second?
  5. Mission 5On a fast train, you throw a ball forward. How fast is the ball moving?
  6. Mission 6Fire a bullet horizontally and drop another at the same instant. Which hits the ground first?
  7. Mission 7If an object's acceleration keeps changing, how can you work out where it ends up?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to AP Physics C: Mechanics