← AP Physics C: Mechanics
⭐ 0
AP Physics C: Mechanics · Unit 6: Energy and Momentum of Rotating Systems
Mini-Lesson

AP® Physics C: Mechanics Unit 6: Energy and Momentum of Rotating Systems

7 missions. Guess, learn, then check. Your place is saved.

Covers College Board topics 6.1–6.6

Short, curiosity-driven missions (about 20 minutes each) that teachers can assign. Use them alongside AP Classroom practice.

  1. Mission 1Race a hoop and a solid cylinder down a slope. Which wins, and does their mass matter?
  2. Mission 2Why do a landing plane's tires smoke at touchdown, but not once they are rolling?
  3. Mission 3A spinning skater pulls in her arms and whirls faster. Where does the extra spin come from?
  4. Mission 4A brake stops a spinning flywheel. Where does its angular momentum go?
  5. Mission 5A puck slides past a post in a straight line. Does it have angular momentum about the post?
  6. Mission 6When a twist keeps changing, how do you find the spin and the energy it gives?
  7. Mission 7How fast must a probe leave a planet so that it never comes back?

AP® is a trademark registered by the College Board, which is not affiliated with, and does not endorse, this website.

Mission 1Topics 6.1, 6.5

Mission 1: Race a hoop and a solid cylinder down a slope. Which wins, and does their mass matter?

Make a guess: Race a hoop and a solid cylinder down a slope. Which wins, and does their mass matter?

Mission 1

Rotational kinetic energy

Spinning wheelωv = rωcenter of mass at restArrow lengths proportional to distance from theaxle.
  • Each bit of a spinning object moves at v = rω, so has ½mr²ω².
  • Add them up: Σ½mr²ω² = ½(Σmr²)ω².
  • K = ½Iω²
Quick check
?A uniform grinding wheel spins at constant angular velocity on a fixed axle, so its center of mass stays at rest. A student claims: "The velocities of points on opposite sides of the wheel are equal in size and opposite in direction, so they cancel, and the wheel has no kinetic energy." Which response to the student's claim is correct?
Quick check
Side view of a wheel standing on level ground. Three points on the wheel are marked with dots: P at the top of the rim, PCBvω
?The diagram shows a wheel rolling without slipping along level ground; the arrow shows the velocity v of its center C. Points P and B are on the rim, as shown. Which statement describes the velocities of P and B relative to the ground at the instant shown?
Mission 1

Rolling without slipping

Rolling velocitiestranslationvvvrotationvvrolling2vv0: at rest+=rim speed rω = vv is the speed of the center of mass; rollingwithout slipping, v = rω.
  • The contact point is momentarily at rest on the ground.
  • So the center moves exactly one circumference per turn:
  • vcm = rω, acm = rα, Δx = rΔθ
  • Top of the wheel: 2vcm. Bottom: 0.
  • Static friction acts at a point that is not sliding: in the ideal case it does no work and dissipates no energy.
Mission 1

Total kinetic energy

Energy splitRolling solid cylinder: kinetic energy9.0 J4.5 Jtranslationalrotationaltotal 13.5 JBar to scale:translational : rotational = 2 : 1.
  • A rolling body moves and spins:
  • total K = ½Mvcm² + ½Icmω²
  • Example: solid cylinder, M = 2.0 kg, I = ½MR², rolling at 3.0 m/s.
  • Translational: ½ × 2.0 × 3.0² = 9.0 J.
  • Rotational: ½(½MR²)(v/R)² = ¼Mv² = 4.5 J.
  • Total 13.5 J. R cancels.
Mission 1

Worked example: down a slope

Down the slopefrom resth = 0.80 m2/3 translational1/3rotationalkinetic energy at the bottomEnergy bar to scale. Slope not to scale.
  • Solid cylinder (I = ½MR²) rolls from rest down a slope, dropping h = 0.80 m.
  • Energy: Mgh = ½Mv² + ½(½MR²)(v/R)² = ¾Mv²
  • v = √(4gh/3). M and R cancel.
  • v = √(4 × 10 × 0.80 ÷ 3) = 3.3 m/s
  • A block sliding without friction: √(2gh) = 4.0 m/s. The cylinder is slower: some energy goes into spin.
Mission 1

The race

The raceSame slope, same instant, all from restsolid sphere, k = 2/52/7 spinsolid cylinder, k = 1/21/3 spinhoop, k = 11/2 spinrotationaltranslationalPies: shares of kinetic energy. Positions toscale (distance ∝ 1/(1 + k)); mass and radiusdo not matter.
  • Write I = kMR². Then v = √(2gh/(1 + k)).
  • Hoop: k = 1. Half its kinetic energy is rotational.
  • Solid cylinder: k = ½. One third rotational.
  • Solid sphere: k = 2/5. Two sevenths rotational.
  • Smaller k → less energy locked in spin → faster.
  • Mass and radius cancel. Only the shape (k) matters.
Quick check
?A thin-walled hollow ball (I = (2/3)MR²) is released from rest and rolls without slipping down a ramp. Its center of mass descends a vertical height of 1.2 m. Use g = 10 m/s². What is the speed of its center of mass at the bottom?
Mission check

?A solid ball (I = (2/5)MR²) and a thin-walled hollow ball (I = (2/3)MR²) have the same mass M and the same radius R. Both roll without slipping along a level floor at the same speed. Which ball must have more energy removed to bring it to rest?
Mission 2Topics 6.2, 6.5

Mission 2: Why do a landing plane's tires smoke at touchdown, but not once they are rolling?

Make a guess: Why do a landing plane's tires smoke at touchdown, but not once they are rolling?

Quick check
?An electric motor keeps a flywheel turning at constant angular velocity. The motor exerts a torque on the flywheel in the sense of its rotation, and friction in the axle exerts an opposing torque of equal magnitude. A student claims: "The flywheel's kinetic energy does not change, so the motor's torque does no work on the flywheel." Which reasoning correctly evaluates the student's claim?
Mission 2

Work done by a torque

Work done by a torqueWith the rotationrΔθarc rΔθFωW = τΔθ > 0energy inOpposing the rotationωpadfτW = τΔθ < 0energy out
  • A force F tangent to the circle at radius r: as the object turns through Δθ, its point of application moves an arc length rΔθ.
  • W = F × rΔθ = τΔθ (constant torque).
  • Varying torque: W = ∫τ dθ.
  • Torque in the same sense as the rotation: W > 0, energy in.
  • Torque opposing the rotation (brakes, axle friction): W < 0, energy out.
  • No rotation, no work, however large the torque.
Mission 2

Area under a torque–angle graph

Torque against angle01.02.03.04.001.02.03.03.0 J6.0 Jθ (rad)τ (N·m)area = work = 9.0 J
  • Work = area under the τ–θ graph (θ in radians).
  • Example: τ rises steadily from 0 to 3.0 N·m over the first 2.0 rad, then stays at 3.0 N·m to 4.0 rad.
  • Area = ½ × 2.0 × 3.0 + 2.0 × 3.0 = 3.0 + 6.0 = 9.0 J.
  • Flywheel, I = 0.50 kg·m², from rest, no friction: 9.0 = ½ × 0.50 × ω².
  • ω = √(2 × 9.0 ÷ 0.50) = 6.0 rad/s.
Quick check
Graph of torque, τ (N·m), on the vertical axis against angular position, θ (rad), on the horizontal axis. The vertical aτ (N·m)θ (rad)1.02.01.02.03.04.0
?The graph shows the torque τ exerted on a wheel by a motor as a function of the wheel's angular position θ. How much work does the motor's torque do on the wheel as the wheel turns from θ = 0 to θ = 4.0 rad?
Mission 2

Rolling or slipping?

Rolling or slippingRollingvcmωstatic frictioncontact point at restno work, no energy lostSlippingvcmω smallcontact point slideskinetic frictionvcm ≠ rωenergy dissipatedas thermal energyFriction drawn at the contact point.
  • Rolling without slipping: vcm = rω. Contact point at rest. Static friction does no work: no energy dissipated (ideal case).
  • Slipping: vcm ≠ rω. The surfaces slide over each other.
  • Kinetic friction acts at a sliding point: it dissipates energy (thermal energy, tire smoke, worn rubber).
  • While slipping, vcm and ω change separately; you cannot get one from the other.
Quick check
Graph with speed on the vertical axis and time t on the horizontal axis; the vertical axis is marked 0 at the origin andspeedtt₁0vcmrω
?A bowling ball is launched along a level lane so that at first it slides without rotating. The graph shows the speed vcm of its center of mass and the product rω of its radius and angular speed as functions of time t. Which claim is supported by the graph?
Mission 2

The skid that ends in rolling

Skid then rollv0t10vcmrωrolling: vcm = rωslippingtspeedKinetic energyshrinks until t1, then constanttranslationalrotationalDrawn to scale for a solid sphere.
  • A bowling ball is launched sliding, not spinning: vcm = v0, ω = 0.
  • Kinetic friction acts backward at the contact point.
  • It slows the center and exerts a torque that spins the ball up.
  • When vcm = rω, sliding stops. The ball rolls; on level ground friction is then zero.
  • Solid sphere: a = −μg, α = 5μg/(2r). Rolling starts at v = (5/7)v0.
  • KE then = ½(7/5)M(5v0/7)² = (5/7) × ½Mv0². 2/7 of the KE has been dissipated.
Mission 2

Back to the runway

  • At touchdown the wheels are not turning (ω = 0), but the plane moves fast.
  • The tires slide on the runway: kinetic friction dissipates energy → hot rubber, smoke.
  • The same friction exerts a torque that spins the wheels up.
  • Once vcm = rω, the tires roll: no sliding, no dissipation, no smoke.
Mission check

?A hoop is spun about its axle and then set down upright on a rough, level floor, with its center at rest. At first the hoop skids, spinning in place; then it moves off and soon rolls without slipping. What happens to the hoop's total kinetic energy while it skids?
Mission 3Topics 6.3, 6.4

Mission 3: A spinning skater pulls in her arms and whirls faster. Where does the extra spin come from?

Make a guess: A spinning skater pulls in her arms and whirls faster. Where does the extra spin come from?

Mission 3

Angular momentum

Angular momentum and ILLωωmass near the axismass far from the axissmaller I, smaller Llarger I, larger LSame mass, same ωCurved arrows show sense only; arrow size showslarger or smaller L, not to scale.
  • Angular momentum: L = Iω for a rigid object rotating about a fixed axis.
  • I = rotational inertia about that axis.
  • Unit: kg·m²/s (the same as N m s).
  • Same ω, more mass far from the axis → larger I → larger L.
  • The rotational partner of linear momentum p = mv.
Mission 3

Worked example

  • A bicycle wheel: I = 0.12 kg·m², spinning at ω = 25 rad/s.
  • L = Iω = 0.12 × 25 = 3.0 kg·m²/s.
  • ω must be in rad/s. Convert from rev per second or per minute first (1 rev = 2π rad).
Quick check
?A thin hoop (I = MR²) and a uniform solid disk (I = ½MR²) have the same mass M and the same radius R. The hoop rotates about its central axis at angular speed ω; the disk rotates about its central axis at 2ω. How do their angular momenta compare?
Mission 3

Angular impulse

Angular impulsecounterclockwise +ωFτbrake torqueopposes ω−1.52.00t (s)τ (N·m)τΔt = ΔLarea = −3.0 N·m·s
  • A net torque acting for a time changes L.
  • Angular impulse = ∫τ dt = ΔL. For a constant torque this is τΔt.
  • ΔL = L − L0: final minus initial. Choose a positive sense (e.g. counterclockwise) and keep signs.
  • Rearranged: τnet = dL/dt. With I constant: τnet = I dω/dt = Iα.
Mission 3

Worked example

  • A wheel, I = 0.50 kg·m², spins counterclockwise at 12 rad/s. A brake exerts a clockwise torque of 1.5 N·m for 2.0 s.
  • Counterclockwise positive. L0 = 0.50 × 12 = +6.0 kg·m²/s.
  • Angular impulse = τΔt = (−1.5)(2.0) = −3.0 N·m·s.
  • L = L0 + ΔL = 6.0 − 3.0 = +3.0 kg·m²/s → ω = 3.0 ÷ 0.50 = 6.0 rad/s, still turning the same way.
Quick check
?Counterclockwise is taken as positive. A motorized turntable with rotational inertia I is rotating counterclockwise with angular speed ω0. The motor then brings it to rotate clockwise with angular speed 3ω0. Using this sign convention for both the initial and final angular momenta, which expression gives the change in the turntable's angular momentum?
Mission 3

Conservation of angular momentum

Internal torque pairττsystem boundarytop disk onbottom diskfriction torquesequal size,opposite senseinternal: theycancel, so totalL is constant
  • Net external torque zero → the system's total L stays constant.
  • Torques that parts of a system exert on each other come in equal and opposite pairs (Newton's third law). They cancel: internal torques cannot change the total L.
  • So: I1ω1 = I2ω2 for one object that changes shape.
Mission 3

Changing shape

SkaterArms outI = 3.6 kg·m²ω = 2.0 rad/sArms inI = 1.2 kg·m²ω = 6.0 rad/sIωLIωLL the same; I falls to a third, ω triplesBars to scale. Ice and air: negligible torqueabout her axis.
  • Skater, arms out: I1 = 3.6 kg·m², ω1 = 2.0 rad/s.
  • Arms in: I2 = 1.2 kg·m². Ice and air exert negligible torque about her vertical axis.
  • ω2 = I1ω1/I2 = (3.6 × 2.0) ÷ 1.2 = 6.0 rad/s.
  • L is unchanged. I falls, so ω rises. Nothing creates angular momentum.
  • Rotational kinetic energy rises: 7.2 J → 21.6 J. Her muscles do work pulling her arms in.
Mission 3

Coupled pairs

Coupled disksBeforeAfterspinningnot spinningtogether, slowerbearing: no external torque about the axisfriction between the disks is internal
  • A turntable (I = 0.030 kg·m²) spins freely at 4.0 rad/s. A disk (I = 0.010 kg·m²), not spinning, drops onto it on the same axis.
  • Friction between them is internal. No external torque about the axis.
  • Before: 0.030 × 4.0 + 0 = 0.12 kg·m²/s. After: (0.030 + 0.010)ω.
  • ω = 0.12 ÷ 0.040 = 3.0 rad/s.
  • Kinetic energy is not conserved here: friction while they slip transfers some to internal energy.
Quick check
?Disk 1, with rotational inertia 0.40 kg·m², rotates counterclockwise at 5.0 rad/s on a vertical axle. Disk 2, with rotational inertia 0.20 kg·m², rotates clockwise at 4.0 rad/s on the same axle, just above disk 1. Friction at the axle is negligible. Disk 2 drops onto disk 1, and the two disks soon rotate together. What is the angular speed of the two disks when they rotate together?
Mission check

?A playground merry-go-round with a rotational inertia of 240 kg·m² about its axis turns freely at 1.5 rad/s. A child of mass 40 kg, moving straight toward the axis, steps onto the edge, 1.5 m from the axis. Treat the child as a point mass. What is the new angular speed?
Mission 4Topics 6.3, 6.4

Mission 4: A brake stops a spinning flywheel. Where does its angular momentum go?

Make a guess: A brake stops a spinning flywheel. Where does its angular momentum go?

Mission 4

Angular impulse from a graph

Angular impulse from areascounterclockwise positivet (s)τ (N·m)+2.03.0+6.0t (s)τ (N·m)−1.52.0−3.0area above the axis:+6.0 N·m·scounterclockwisearea below the axis:−3.0 N·m·sclockwiseArea under a τ–t graph = angular impulse(N·m·s).
  • Pick a positive sense, e.g. counterclockwise positive.
  • Angular impulse has the same sense as the torque, whatever way the object is turning.
  • Area under a τ–t graph = angular impulse (N·m·s).
  • Area under a net external τ–t graph = ΔL of the object.
  • Area below the t-axis counts as negative.
Mission 4

Worked example

  • Wheel: I = 2.5 kg·m², ω0 = 2.0 rad/s counterclockwise, so L0 = +5.0 kg·m²/s.
  • Net counterclockwise torque: rises steadily from 0 to 8.0 N·m in 1.0 s, then stays at 8.0 N·m for 2.0 s.
  • Area = triangle + rectangle = ½(1.0)(8.0) + (2.0)(8.0) = 4.0 + 16 = 20 N·m·s.
  • L = 5.0 + 20 = 25 kg·m²/s → ω = 25 ÷ 2.5 = 10 rad/s.
  • Torque given as a function: τ = (3.0 N·m/s)t from 0 to 2.0 s → ΔL = ∫0² 3.0t dt = 1.5t² |0² = 6.0 N·m·s.
Quick check
Graph of τ (N·m) on the vertical axis, marked 0, 1.0, 2.0, 3.0 and 4.0, against t (s) on the horizontal axis, marked 1.0τ (N·m)t (s)01.02.03.04.01.02.03.04.05.0
?The graph shows the net external torque exerted on a wheel as a function of time. At t = 0, the wheel's angular momentum is 1.0 kg·m²/s, in the same sense as the torque. What is the magnitude of the wheel's angular momentum at t = 5.0 s?
Mission 4

Torque from an L–t graph

L–t slopet (s)L (kg·m²/s)+4.0−4.01.03.05.0flat: τnet = 0slope = τnet = −2.0 N·mNet torque = slope of the L–t graph, not thevalue of L.
  • τnet = dL/dt: net torque = slope (tangent) of the L–t graph.
  • Flat line: net torque zero, even if L is large. A wheel spinning steadily needs no net torque.
Quick check
?A resistive torque slows a spinning wheel so that its angular momentum about its axle decreases with time as L = L0e−t/T, where L0 and T are positive constants and e is the base of natural logarithms. What is the magnitude of the net torque exerted on the wheel at t = T?
Mission 4

Choose the system

Choose the systemSystem: all threeSystem: wheel alonetorques internal:total L stays zeroher torque is external:wheel's L changeswheel: large ωstudent + stool: small ω, opposite senseRotation senses as seen from above.
  • Student on a free stool spins up a bicycle wheel held above her head.
  • Her torque on the wheel and the wheel's torque on her: a third-law pair. Equal and opposite angular impulses.
  • System = student + stool + wheel: those torques are internal. Total L stays zero: wheel one way, student the other.
  • System = wheel alone: her torque is external, so the wheel's L changes.
  • Same physics; the choice of system decides whether L is constant.
Quick check
?A student stands at rest at the edge of a turntable that is also at rest and can rotate with negligible friction about a fixed vertical axle. The student starts to walk counterclockwise around the edge, and the turntable starts to rotate clockwise. For which system is the total angular momentum about the axle constant while the student starts to walk?
Quick check
?A flywheel spins on an axle mounted in a machine frame that is bolted to the floor. A brake pad fixed to the frame presses on the flywheel and brings it to rest. Which statement about the angular momentum that the flywheel loses is correct?
Mission 4

Never destroyed, only transferred

Braked flywheelωbrake padframefloor, Earthflywheelpadframefloor, EarthAngular momentum L passes along:Earth's change in ω is far too small to detect.
  • Angular momentum is conserved in all interactions. If a system's L changes, the same amount appears somewhere else.
  • Nonzero net external torque → L is transferred between the system and its environment.
  • Flywheel braked by a pad fixed to a frame bolted to the floor: the flywheel's L passes through pad, frame and floor to Earth.
  • Earth's huge rotational inertia means its change in ω is far too small to detect.
  • Friction does not destroy angular momentum. (It does transfer kinetic energy to internal energy: a separate quantity.)
Mission check

?An astronaut floats inside a space station, touching nothing and holding nothing, and rotates slowly about an axis through her center of mass. Air resistance is negligible. Which of the following could change her angular momentum about that axis?
Mission 5Topics 6.3, 6.4, 6.6

Mission 5: A puck slides past a post in a straight line. Does it have angular momentum about the post?

Make a guess: A puck slides past a post in a straight line. Does it have angular momentum about the post?

Mission 5

Angular momentum of a point object

Point-object angular momentumPr⊥θvrθvrPuck at two moments, sliding at constant velocityr and θ change; r sin θ = r⊥ does notL = mv r⊥: the same at both
  • About a chosen point P:
  • L = r × p, magnitude L = rmv sin θ; sense from the right-hand rule.
  • r sin θ = r⊥, the perpendicular distance from P to the line of motion. So L = mv r⊥.
  • Moving in a straight line at constant velocity: r⊥ is fixed → L about P is constant, even though r and θ keep changing.
Mission 5

It depends on the point

Choice of pointvon the line: L = 0below: clockwiseabove:counterclockwiser⊥larger r⊥: larger L
  • P on the line of motion: θ = 0 or 180° → L = 0 about P.
  • P on opposite sides of the path: opposite senses (one clockwise, one counterclockwise).
  • Farther from the path: larger r⊥, larger L.
  • Always state "about which point". A circle is not needed for angular momentum.
Quick check
Top view. A puck, labeled puck, slides to the right along a straight path shown as a dotted horizontal line; its velocitvXYZpuck
?The diagram is a top view of a puck sliding at constant velocity along a straight path across a level, frictionless table. Point Y lies on the path ahead of the puck; point X lies below the path and point Z above it, as shown. Which claim about the puck's angular momentum about X, Y and Z is correct?
Mission 5

Worked example; circles agree

  • Puck: m = 0.20 kg, v = 3.0 m/s; its path passes 0.40 m from a post.
  • L = mv r⊥ = 0.20 × 3.0 × 0.40 = 0.24 kg·m²/s about the post, at every point of the path.
  • Point object in a circle of radius r: θ = 90°, so L = mvr. Also I = mr² and ω = v/r, so Iω = mvr. The two descriptions agree.
  • Total L = sum of the parts, each about the same axis, with signs for sense.
Mission 5

Collisions with rotation

Merry-go-roundBefore30 kg at 4.0 m/s2.0 mat restI = 240 kg·m²L = mvR = 240 kg·m²/sAfterω = 0.67 rad/schild on the rimItotal = 360 kg·m²L = Iω = 240 kg·m²/sDrawn to scale. The axle's force passes throughthe axis: no torque about it.
  • Merry-go-round at rest: I = 240 kg·m², radius 2.0 m. A 30 kg child runs at 4.0 m/s along a tangent and jumps on at the rim.
  • The axle's force passes through the axis: no torque about the axle → L conserved about it.
  • Before: L = mvR = 30 × 4.0 × 2.0 = 240 kg·m²/s (child only).
  • After: Itotal = 240 + 30 × 2.0² = 360 kg·m² → ω = 240 ÷ 360 = 0.67 rad/s.
  • Not conserved: linear momentum (the axle pushes) and kinetic energy (240 J → 80 J).
Quick check
?A lump of clay moving horizontally in a straight line strikes and sticks to the outer edge of a door that is initially at rest. The door can rotate about vertical hinges with negligible friction. The collision decreases the kinetic energy of the clay–door system. Which statement about the angular momentum of the clay–door system about the hinge axis is correct?
Mission 5

Orbits

Elliptical orbitEarthfocus: Earth's centercenter of ellipsev1v2r2closest: r1 = 6.8 × 106 m, v1 = 8.7 × 103 m/sfarthest: r2 = 1.2 × 107 m, v2 = 4.9 × 103 m/smv1r1 = mv2r2: faster when closerEarth and orbit to scale; speed arrows toscale. Orbit counterclockwise.
  • Gravity on a satellite points at the planet's center: no torque about the center → the satellite's L is constant.
  • Only gravity acts → the system's mechanical energy is constant.
  • Circular orbit: r and v fixed → K, Ug, E and L all constant.
  • Elliptical orbit: E and L constant; K and Ug trade. Closer → Ug more negative, K larger, faster.
  • At the closest and farthest points, v ⟂ r, so mv1r1 = mv2r2.
  • Example (Earth): 8.7 × 10³ m/s at 6.8 × 10⁶ m from the center → at 1.2 × 10⁷ m: v = 8.7 × 10³ × 6.8 ÷ 12 = 4.9 × 10³ m/s.
Quick check
An elliptical orbit around Earth, with Earth at a point on the long axis nearer the right end. The satellite is shown atEarth8.0 × 10⁶ m1.6 × 10⁷ mv = 8.2 × 10³ m/sperigeeapogee
?The diagram shows the elliptical orbit of a satellite around Earth, with the satellite's distances from Earth's center at perigee (closest point) and apogee (farthest point) and its speed at perigee. What is the satellite's speed at apogee?
Mission check

?Car 1, of mass m, drives at constant speed v along a straight road that passes a lamp post at a perpendicular distance d. Car 2, of mass 2m, drives at constant speed v/2 along a straight road that passes the same post at a perpendicular distance 3d. What is the ratio L2/L1 of the magnitudes of the cars' angular momenta about the post?
Mission 6Topics 6.2, 6.3

Mission 6: When a twist keeps changing, how do you find the spin and the energy it gives?

Make a guess: When a twist keeps changing, how do you find the spin and the energy it gives?

Mission 6

Angular momentum as a cross product

Angular momentum of a point objectpathrp = mvθdOLAbout point Or from O to the object|L| = rmv sin θ = mvdF along rτ = 0L constant
  • As a vector: L = r × p, r from the chosen point to the object.
  • Same right-hand rule as for torque: counterclockwise motion in the page → L out of the page.
  • τnet = dL/dt: the net torque sets the rate of change of L, in the direction of τ.
  • Constant I: dL/dt = I dω/dt = Iα.
  • Gravity on a planet points at the Sun: τ about the Sun = 0, so L about the Sun is constant.
Quick check
?A small ball of mass m moves at constant speed v in a horizontal circle of radius r at the end of a string. A student claims that the ball's angular momentum about the center of the circle has magnitude mvr, whether it is found from L = Iω or from L = r × p. Which reasoning correctly supports the claim?
Mission 6

Work by a varying torque

Work as area under a torque–angle graphτ (N·m)θ (rad)123456.04812W = 36 Jτ = 12 − 2.0θ
  • Constant torque: W = τΔθ. When τ changes with θ: W = ∫τ dθ (θ in radians) = area under the τ–θ graph.
  • Net work = ΔKrot = ½Iω² − ½Iω0².
  • Example: τ = (12 N·m) − (2.0 N·m/rad)θ on a wheel at rest, I = 0.50 kg·m².
  • W from 0 to 6.0 rad = [12θ − 1.0θ²] = 72 − 36 = 36 J.
  • ½(0.50)ω² = 36 → ω = 12 rad/s.
  • Rate of work: P = τω.
Quick check
?A wheel of rotational inertia I starts from rest. The net torque exerted on it depends on its angular position θ as τ = τ0(1 − θ²/θ1²), where τ0 and θ1 are positive constants, so the torque falls to zero at θ = θ1. What is the wheel's angular speed at θ = θ1?
Mission 6

Angular impulse of a varying torque

Angular impulse of a varying torqueτ (N·m)t (s)0.51.01.52.01233.62.4 N·m·sτ = 0.90t²Shaded area: ∫τ dt = 2.4 N·m·s = ΔLDashed: 3.6 × 2.0 = 7.2 N·m·s (wrong)
  • Constant torque: ΔL = τΔt. When τ changes with t: angular impulse = ∫τ dt = area under the τ–t graph, in the direction of the torque.
  • ΔL = ∫τ dt: the rotational impulse–momentum theorem, from τnet = dL/dt.
  • Example: τ = (0.90 N·m/s²)t² on a wheel at rest, I = 0.60 kg·m², for 2.0 s.
  • ∫τ dt = [0.30t³] from 0 to 2.0 = 2.4 N·m·s = ΔL.
  • ω = ΔL/I = 2.4 ÷ 0.60 = 4.0 rad/s.
  • Not τfinal × t: that would give 3.6 × 2.0 = 7.2 N·m·s, three times too big.
Mission check

?A ball of mass m is thrown horizontally with speed v0 from point P at the top of a cliff. Air resistance is negligible, and g is the magnitude of the acceleration due to gravity. What is the magnitude of the ball's angular momentum about P at time t after it is thrown, before it lands?
Mission 7Topic 6.6

Mission 7: How fast must a probe leave a planet so that it never comes back?

Make a guess: How fast must a probe leave a planet so that it never comes back?

Mission 7

Energy in a circular orbit

Energy in a circular orbitrenergy0RK = GMm/2rE = −GMm/2rU = −GMm/rAt every r: kinetic = −E, potential = 2E.All three tend to 0 at large r.
  • Kinetic: K = ½mv² = GMm/2r = −U/2.
  • Potential: U = −GMm/r.
  • Total: E = K + U = U/2 = −GMm/2r.
  • Larger orbit: kinetic energy falls, potential energy rises by twice as much, so total energy rises (less negative).
  • To move a satellite outward, energy must be supplied.
Quick check
?A satellite in a circular orbit of radius r around a planet has kinetic energy K0. The satellite is moved to a circular orbit of radius 4r around the same planet. What is its kinetic energy in the new orbit?
Mission 7

Escape speed

Escaping the energy wellplanetUg (J)r (m)0R2Rturning pointK at launch(total energy = 0)total energy < 0: falls backtotal energy = 0: just escapestotal energy > 0: speed to spareKinetic energy = gap between the line and thecurve.
  • To escape, an object must reach infinity, where potential energy is zero, with kinetic energy ≥ 0.
  • So it needs total energy ≥ 0. The minimum launch speed gives total energy exactly 0.
  • K + Ug = 0: ½mv² − GMm/r = 0 → vesc = √(2GM/r).
  • The object's own mass cancels. It holds at any distance r from the center, not only at the surface.
  • Earth's surface: √(2 × 6.67 × 10⁻¹¹ × 5.97 × 10²⁴ ÷ 6.37 × 10⁶) = 11.2 km/s (ignoring air resistance and Earth's rotation).
Quick check
?A probe is launched straight up from the surface of a planet with exactly the escape speed. The planet has no atmosphere, its motion is negligible, and the only force exerted on the probe after launch is the planet's gravitational force. Which statement describes the probe's motion after launch?
Mission check

?The escape speed from the surface of planet X is v0. Planet Y has the same mass as planet X but four times its radius. What is the escape speed from the surface of planet Y?
Recap

The big ideas

Mission 1

  • Krot = ½Iω²; total K = ½Mvcm² + ½Icmω².
  • Rolling without slipping: vcm = rω; ideal static friction does no work. Down a slope, smaller I/(MR²) wins; mass and radius cancel.

Mission 2

  • W = ∫τ dθ, the area under a τ–θ graph; a torque opposing the rotation takes energy out.
  • Slipping: kinetic friction dissipates energy and vcm ≠ rω; rolling without slipping: no dissipation.

Mission 3

  • L = Iω. A net torque changes it: ΔL = τΔt (angular impulse).
  • ΔL = ∫τ dt; τnet = dL/dt.
  • No external torque → L constant. Smaller I → larger ω (skaters, divers, coupled disks).

Mission 4

  • Area under τ–t = angular impulse = ΔL; slope of L–t = net torque. Angular impulse has the torque's sense.
  • ΔL = ∫τ dt; τnet = dL/dt.
  • Angular momentum is never destroyed: internal torques cancel; external torques transfer L to or from the environment.

Mission 5

  • Point object: L = r × p, magnitude rmv sin θ = mv r⊥.
  • A force through the axis exerts no torque: L about that axis is conserved in sticking collisions and in orbits (mv1r1 = mv2r2 at the closest and farthest points).

Mission 6

  • L = r × p (right-hand rule); τnet = dL/dt. A varying torque: W = ∫τ dθ (area under τ–θ) and ΔL = ∫τ dt (area under τ–t).

Mission 7

  • Escape: K + Ug = 0, so vesc = √(2GM/r), independent of the launched mass.
  • Circular orbit: K = −U/2 and E = U/2 = −GMm/2r.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Energy and Momentum of Rotating Systems for AP Physics C: Mechanics. 🎉

  1. Mission 1Race a hoop and a solid cylinder down a slope. Which wins, and does their mass matter?
  2. Mission 2Why do a landing plane's tires smoke at touchdown, but not once they are rolling?
  3. Mission 3A spinning skater pulls in her arms and whirls faster. Where does the extra spin come from?
  4. Mission 4A brake stops a spinning flywheel. Where does its angular momentum go?
  5. Mission 5A puck slides past a post in a straight line. Does it have angular momentum about the post?
  6. Mission 6When a twist keeps changing, how do you find the spin and the energy it gives?
  7. Mission 7How fast must a probe leave a planet so that it never comes back?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to AP Physics C: Mechanics