← AP Physics C: E&M
⭐ 0
AP Physics C: E&M · Science practices (whole course)
Mini-Lesson

AP® Physics C: E&M: Science Practices

4 missions. Guess, learn, then check. Your place is saved.

Covers the AP science practices, across all units

Short, curiosity-driven missions (about 20 minutes each) that teachers can assign. Use them alongside AP Classroom practice.

  1. Mission 1A newton, a joule, a watt: what are they actually made of?
  2. Mission 2How can a straight line expose a law that is hiding inside a curve?
  3. Mission 3Roughly how many times does a heart beat in a lifetime: 10⁶, 10⁹ or 10¹²?
  4. Mission 4Why do physicists time 20 swings of a pendulum instead of just one?

AP® is a trademark registered by the College Board, which is not affiliated with, and does not endorse, this website.

Mission 1

Mission 1: A newton, a joule, a watt: what are they actually made of?

Make a guess: A newton, a joule, a watt: what are they actually made of?

Mission 1

Number × unit

  • A physical quantity = number × unit. 3.0 m means 3.0 × (1 meter).
  • No unit, no meaning: "the length is 3.0" could be 3.0 mm or 3.0 km.
  • Units obey algebra: m ÷ s = m/s; m × m = m².
  • Table headings and axis labels give the quantity and its unit, e.g. speed (m/s).
Mission 1

The base units you need

The six base unitsmasskgkilogramlengthmmetertimessecondcurrentAamperetemperatureKkelvinamount ofsubstancemolmoleMass: the kilogram (kg), not the gram.Temperature: K, no degree sign.
  • Every SI unit is built from base units.
  • Mass: kg · length: m · time: s · current: A · temperature: K · amount of substance: mol.
  • Every unit you will use is built from these six. (The SI has a seventh, the candela, for luminous intensity; you will not need it.)
Mission 1

Derived units

Derived units from base unitskgmsAbase unitsvelocity = displacement ÷time÷ svelocitym/sacceleration = change invelocity ÷ time÷ saccelerationm/s²force = mass × acceleration× kgforcekg·m/s² = Nwork = force × distance× mwork, energykg·m²/s² = Jpower = energy ÷ time÷ spowerkg·m²/s³ = WAlso from base units:chargeA·s = Ccharge = current × time
  • A derived unit comes from a defining equation. Replace each quantity by its unit.
  • Velocity = displacement ÷ time → m/s. Acceleration → m/s².
  • Density = mass ÷ volume → kg/m³. Momentum = mass × velocity → kg·m/s.
  • Force = mass × acceleration → kg·m/s² = N (newton).
  • Work = force × distance → N·m = kg·m²/s² = J (joule).
  • Charge = current × time → A·s = C (coulomb).
Mission 1

Worked example: the watt

  • Power = energy ÷ time.
  • Unit: J/s.
  • J = kg·m²/s² (from work = force × distance).
  • W = kg·m²/s² ÷ s = kg·m²/s³.
  • Method: write the defining equation, then substitute units you already know, down to base units.
Quick check
?A spring's stiffness is its spring constant: the force needed per unit change in its length. What is the unit of the spring constant in base units?
Mission 1

Prefixes and powers of ten

Prefix ladder10⁰ = 110¹²Ttera10⁹Ggiga10⁶Mmega10³kkilo10⁻²ccenti10⁻³mmilli10⁻⁶µmicro10⁻⁹nnano10⁻¹²ppico1 m × 1 m = 1 m²1 mm × 1 mm1 mm² = (10⁻³ m)²= 10⁻⁶ m²Not to scale: amillion 1 mmsquares fill 1 m².
  • T tera 10¹² · G giga 10⁹ · M mega 10⁶ · k kilo 10³
  • c centi 10⁻² · m milli 10⁻³ · µ micro 10⁻⁶ · n nano 10⁻⁹ · p pico 10⁻¹²
  • Scientific notation: 0.000 52 m = 5.2 × 10⁻⁴ m. One nonzero digit before the decimal point.
  • Prefix on a squared unit: square the factor too. 1 mm = 10⁻³ m, so 1 mm² = 10⁻⁶ m².
Quick check
?The cross-sectional area of a wire is 0.50 mm². What is this area in m²?
Mission 1

Converting units

  • Multiply by a fraction equal to 1, and cancel units.
  • 72 km/h = 72 × 1000 m ÷ 3600 s = 20 m/s.
Mission check

?Pressure is force ÷ area, and its unit is the pascal (Pa). What is the pascal in base units?
Mission 2

Mission 2: How can a straight line expose a law that is hiding inside a curve?

Make a guess: How can a straight line expose a law that is hiding inside a curve?

Mission 2

Plotting a good graph

Poor graph and good graphPoor graph06121871421no axis labelssteps of 6 and 7points squeezed intoa cornerdot-to-dotGood graphdistance (m)time (s)012345602468best-fit linecrosses, pointseither side
  • What you change (independent variable): x-axis. What you measure: y-axis.
  • Label: quantity and unit, e.g. time (s).
  • Scale: points fill more than half the grid; steps of 1, 2 or 5.
  • Plot points as small, sharp crosses.
  • Line of best fit: a straight line or smooth curve, points scattered evenly either side. Never join the dots.
Mission 2

Slope, intercept, area

Rise-over-run triangle and tangentyxΔxΔyΔy ÷ Δxy-interceptlarge triangle:corners on the lineOn a curve: tangent at a pointyxtangent
  • Slope = Δy ÷ Δx. Use a large triangle, at least half the line.
  • Slope has units: y-unit ÷ x-unit.
  • y-intercept: the value of y where x = 0.
  • Area under the line: its units are y-unit × x-unit. On a velocity–time graph it is displacement.
  • On a curve: draw a tangent, then take its slope.
Quick check
?A graph shows the force F needed to stretch a spring against how far it is stretched, x. F is in N and x in cm. The line passes through the origin and through (8.0 cm, 2.0 N). What is the spring constant in N/m?
Mission 2

Resistance from an I–ΔV graph

Current against potential differenceIΔVohmicstraight, throughthe originIΔVnon-ohmic elementa curve: not ohmicOhmic: slope = 1/R, so R = 1 ÷ slope
  • Ohm's law: I = ΔV/R. Plot I (vertical) against ΔV (horizontal).
  • Ohmic element: a straight line through the origin. I ∝ ΔV, so R is constant.
  • Slope = I ÷ ΔV = 1/R. So R = 1 ÷ slope.
  • Curved graph: not ohmic. R = ΔV/I at a point, not 1 ÷ the tangent slope.
Quick check
Graph of current I (A) on the vertical axis against potential difference ΔV (V) on the horizontal axis, which is marked XYZ0123450I (A)ΔV (V)
?The graph shows the current I in each of three circuit elements, X, Y and Z, as a function of the potential difference ΔV across it. Which of the elements are ohmic, and why?
Mission 2

Making a straight line

Turning a curve into a straight lineAgainst t: a curvedisplacement (m)t (s)0123450246810Against t²: a straight linedisplacement (m)t² (s²)05101520250246810slope = ½ax= 0.40 m/s²One data set: ax = 0.80 m/s², from rest.
  • Match the equation to y = mx + b.
  • Object starting from rest, constant acceleration:
  • x − x0 = ½ax t² (a kinematics equation)
  • (x − x0) against t²: straight line through the origin, slope ½ax.
  • Displacement against t: a curve. The law was hiding in it.
  • Rule: rearrange the law into y = mx + b. Transform the measured variable (y) or the changed variable (x), whichever the law needs. Constants end up in the slope and intercept.
Mission 2

Worked example: slope and intercept

  • A ball rolls down a long ramp past photogates at different distances from a start line. Plot v² against distance.
  • vx² = vx0² + 2ax(x − x0) (a kinematics equation) → vertical axis vx², horizontal axis (x − x0), slope = 2ax, intercept = vx0².
  • The best-fit line has slope 1.6 m/s² → acceleration = 1.6 ÷ 2 = 0.80 m/s².
  • Intercept: 4.0 m²/s² → initial speed = √4.0 = 2.0 m/s.
Quick check
?The intensity I at a distance r from a small source radiating power P equally in all directions is I = P/(4πr²). Which graph is a straight line through the origin, and what is its slope?
Mission check

?The period of a mass on a spring is T = 2π√(m/k), where k is the spring constant. A student varies m and measures T. Which graph gives a straight line through the origin, and what is its slope?
Mission 3

Mission 3: Roughly how many times does a heart beat in a lifetime: 10⁶, 10⁹ or 10¹²?

Make a guess: Roughly how many times does a heart beat in a lifetime: 10⁶, 10⁹ or 10¹²?

Mission 3

Order of magnitude

Orders of magnitude on a log scaleLog scale: equal steps for each power of ten100101102103104105zoom: 104 to 10524568104105√10 × 104 ≈ 3.2 × 104halfway on the log scale3 × 104: rounds down7 × 104: rounds up
  • Order of magnitude: the nearest power of ten.
  • 3 × 10⁴ → 10⁴. 7 × 10⁴ → 10⁵.
  • The cut-off is √10 ≈ 3.2, the midpoint on a log scale: below it round down, above it round up.
  • "Two orders of magnitude bigger": about 100 times bigger.
Mission 3

Numbers worth knowing

The scale of thingssize (m)10−1510−1010−5100105nucleus10−15 matom10−10 mlight wavelength5 × 10−7 mperson1.7 mstory3 mEarth's radius6.4 × 106 m
  • Adult: mass 70 kg, height 1.7 m, walking 1.5 m/s, reaction time 0.2 s.
  • Car on a fast road: about 30 m/s. One story of a building: 3 m.
  • Water: 1000 kg/m³. Air: about 1.2 kg/m³.
  • Sound in air: 340 m/s. Light: 3.0 × 10⁸ m/s.
  • Atom: 10⁻¹⁰ m across. Nucleus: 10⁻¹⁵ m.
  • Visible light: wavelengths 400–700 nm. Earth's radius: 6.4 × 10⁶ m.
Quick check
?Kinetic energy = ½ × mass × speed². What is the order of magnitude of the kinetic energy of an adult walking?
Mission 3

The Fermi method

  • Break the unknown into factors you can estimate.
  • Round each factor to one significant figure.
  • State each assumption.
  • Multiply. Give the answer as an order of magnitude or to 1 s.f.
  • Errors in different factors partly cancel, so the result is usually within a factor of ten.
Mission 3

Worked example: heartbeats

A Fermi estimateheartbeats in a lifetime= ?beats perminute≈ 70restingheart rateminutes ina year≈ 5 × 10560 × 24 ×365years≈ 80a lifetime××70 × 5 × 105 × 80 ≈ 3 × 109order of magnitude: 109
  • Resting heart rate: about 70 beats per minute.
  • Minutes in a year: 60 × 24 × 365 ≈ 5 × 10⁵.
  • Lifetime: about 80 years.
  • Beats ≈ 70 × 5 × 10⁵ × 80 ≈ 3 × 10⁹.
  • Order of magnitude: 10⁹.
Quick check
?What is the best estimate of the volume of water in a full bath?
Mission 3

How quantities scale

Doubling the side of a squareLside LA = L²2LA = (2L)² = 4L²four of the small squaresdouble L
  • Read the equation as a proportion. Ask: what happens to Y if X doubles?
  • Area of a square of side L: A = L². Double L → A × 4.
  • Pendulum period, T ∝ √L. Make L 4 × longer → T × 2.
  • Gravity between two masses, F ∝ 1/r². Triple r → F × 1/9.
  • Hold everything else constant; change one factor at a time.
Mission 3

Estimates catch mistakes

  • Before you accept an answer, ask: is this size sensible?
  • A walker at 15 m/s? Ten times too fast: look for a unit error (km/h, cm, ms).
  • A 70 kg person's weight is about 700 N. An answer of 7 N or 70 000 N signals a slip.
  • Write the expected order of magnitude first, then calculate.
Quick check
?A solid cylinder stands on one end on a table. A second cylinder of the same material is twice as tall and has twice the diameter. How does the pressure it exerts on the table compare with the first cylinder's? (Pressure = force ÷ area.)
Mission check

?A classroom is about 8 m long, 6 m wide and 3 m high. What is the order of magnitude of the mass of air in it?
Mission 4

Mission 4: Why do physicists time 20 swings of a pendulum instead of just one?

Make a guess: Why do physicists time 20 swings of a pendulum instead of just one?

Mission 4

Planning an experiment

Variables for a pendulum experimentlengthθIndependent: lengthyou change itDependent: periodyou measure it (timefor one swing)Control: mass of bobkept the sameControl: amplitudekept small: θ underabout 10°one swing: thereand back
  • Independent variable: the one you change.
  • Dependent variable: the one you measure.
  • Control variables: everything else that could affect the result. Keep them fixed.
  • Take several values (6 or more is good practice), spread over a wide range.
  • Repeat each reading and average.
  • Plan the graph first: what will you plot to get a straight line?
Mission 4

Measure many, then divide

Timing one swing or twentySame time scale and same ± 0.2 s error bar1 swing: 1.4 s ± 0.2 s0.2 ÷ 1.4 = 14%0 s1 s2 s20 swings: 28.0 s ± 0.2 s0 s1 s2 s25 s26 s27 s28 s0.2 ÷ 28 = 0.7%T = 28.0 ÷ 20 = 1.40 s ± 0.01 smarker at the lowestpoint:the bob moves fastestthere
  • One swing of a pendulum: about 1.4 s. Hand timing: about ± 0.2 s. That is 14%.
  • Time 20 swings: about 28 s, still ± 0.2 s. That is 0.7%.
  • T = 28.0 ÷ 20 = 1.40 s; uncertainty 0.2 ÷ 20 = ± 0.01 s.
  • The same reading uncertainty is shared out over many cycles.
  • Same idea: weigh 50 ball bearings and divide by 50.
  • Start and stop timing as the bob passes a marker at the center of the swing, where it moves fastest.
Mission 4

Conclusions and evaluation

  • Conclusion: state what the data show, only within the range tested. Refer to the graph.
  • Compare with theory, allowing for the uncertainties.
  • Evaluate: find the largest source of uncertainty and say why.
  • Improve with a specific change and the error it reduces: "photogates remove reaction time", not "be more careful".
  • Systematic error → change the method or correct it. Random error → repeat, or measure a larger quantity.
Mission 4

The experimental design question

  • Describe a procedure someone else could follow: equipment, what you measure, with what.
  • Name what you change, what you measure, and what you keep the same.
  • Several values over a wide range; repeated trials.
  • Say what to graph so the result is linear, and how the slope or intercept gives the answer.
  • Say how you reduce uncertainty: many trials, larger measured quantities.
Quick check
?A student investigates how the time t for a ball to fall from rest depends on the drop height h. (h = ½gt², with g constant.) Which plan is best?
Mission check

?A student has a ruler with 1 mm divisions and wants the thickness of one sheet of paper, about 0.1 mm. Which choice and reason are both correct?
Recap

The big ideas

Mission 1

  • Every derived unit reduces to base units (kg, m, s, A, K, mol) through its defining equation: N = kg·m/s², J = kg·m²/s², W = kg·m²/s³.
  • Prefixes: square or cube the factor with the unit (1 mm² = 10⁻⁶ m²).

Mission 2

  • Slope = Δy/Δx with units; area = y × x; tangent for a curve. Linearize by rearranging the law into a straight-line form.

Mission 3

  • Order of magnitude = nearest power of ten. Fermi method: factors, 1 s.f., stated assumptions.
  • Know typical values (70 kg, 1.5 m/s, 1.2 kg/m³ for air, 10⁻¹⁰ m for an atom) and use them to sanity-check answers.
  • Predict factor changes from the proportion in the equation.

Mission 4

  • Plan: independent, dependent and control variables; at least 6 values over a wide range; repeats; a straight-line graph.
  • Measure many cycles or items and divide: the same reading uncertainty becomes a smaller percentage.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Science practices for AP Physics C: E&M. 🎉

  1. Mission 1A newton, a joule, a watt: what are they actually made of?
  2. Mission 2How can a straight line expose a law that is hiding inside a curve?
  3. Mission 3Roughly how many times does a heart beat in a lifetime: 10⁶, 10⁹ or 10¹²?
  4. Mission 4Why do physicists time 20 swings of a pendulum instead of just one?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to AP Physics C: E&M