← AP Physics C: E&M
⭐ 0
AP Physics C: E&M · Unit 10: Conductors and Capacitors
Mini-Lesson

AP® Physics C: E&M Unit 10: Conductors and Capacitors

4 missions. Guess, learn, then check. Your place is saved.

Covers College Board topics 10.1–10.4

Short, curiosity-driven missions (about 20 minutes each) that teachers can assign. Use them alongside AP Classroom practice.

  1. Mission 1Two metal spheres, one big and one small, are joined by a wire. Which ends up with more charge?
  2. Mission 2A charged capacitor has no net charge at all. So what is it actually storing?
  3. Mission 3How can you get more charge onto a capacitor without raising the voltage?
  4. Mission 4Make a capacitor twice as big in every direction. How much more charge does it store per volt?

AP® is a trademark registered by the College Board, which is not affiliated with, and does not endorse, this website.

Mission 1Topics 10.1, 10.2

Mission 1: Two metal spheres, one big and one small, are joined by a wire. Which ends up with more charge?

Make a guess: Two metal spheres, one big and one small, are joined by a wire. Which ends up with more charge?

Mission 1

Potential of a charged conductor

E and V for a charged sphereElectric field EE (N/C)0200040000.100.200.300.40r (m)R3.6 × 10³400Electric potential VV (V)02004000.100.200.300.40r (m)R360 V120 VInside (r < R): E = 0, V constant. V has nojump at R; E does.R = 0.10 m, Q = +4.0 nC. Same for a hollowsphere.
  • E = 0 inside → no work moving charge inside → V is the same everywhere in and on the conductor.
  • The surface is an equipotential, so the field meets it at 90°.
  • Sphere, radius R, charge Q: outside, V = kQ/r and E = kQ/r². Inside: V = kQ/R (constant), E = 0.
  • Example: R = 0.10 m, Q = +4.0 nC (k = 9.0 × 10⁹ N·m²/C²).
  • Inside and on the surface: V = 360 V, E = 0. Just outside: E = 3.6 × 10³ N/C.
  • At r = 0.30 m: V = 120 V, E = 400 N/C.
  • The same holds for a hollow sphere: V inside the cavity = surface value.
Quick check
?A hollow metal sphere with inner radius 0.10 m and outer radius 0.20 m carries a charge of +4.0 × 10⁻⁹ C. It is isolated, far from other charges, and in electrostatic equilibrium. Point P is in the empty cavity, 0.050 m from the center. Take the potential to be zero far from the sphere, and use k = 9.0 × 10⁹ N·m²/C². What is the electric potential at P?
Quick check
?Two metal spheres of different radii are far apart. One is charged and the other is uncharged. They are then connected by a long thin conducting wire. After the charges stop moving, which quantity is the same for the two spheres?
Mission 1

Conductors in contact share charge

Joined spheres share chargefar apartradius 0.050 mradius 0.10 m3.0 nC540 V6.0 nC540 VSame potential, not same charge: Q ∝ R.The bigger sphere holds more charge, morethinly spread.Radii to scale; the spheres are really farapart. Each + is 0.25 nC; the near half of eachsurface is shown.
  • Joined conductors form one conductor: in equilibrium it is one equipotential.
  • Electrons flow until the surfaces are at the same potential.
  • Two spheres far apart, joined by a thin wire: kQ1/R1 = kQ2/R2, so Q ∝ R.
  • The bigger sphere gets more charge.
  • Example: 9.0 nC shared between spheres of radius 0.050 m and 0.10 m.
  • Q1 : Q2 = 1 : 2 → 3.0 nC and 6.0 nC. Both at V = (9.0 × 10⁹)(3.0 × 10⁻⁹)/0.050 = 540 V.
  • Equal potential, not equal charge.
Mission 1

Charge crowds at sharp points

Charge crowds at a pointpoint: crowded charge,strong fieldrounded end: sparseField lines leave the surface at 90°everywhere.One + where each field line leaves the surface.Lines traced for this shape.
  • Joined spheres: surface field E = kQ/R² = V/R. Same V → E ∝ 1/R.
  • In the example: small sphere E = 1.1 × 10⁴ N/C, big sphere 5.4 × 10³ N/C.
  • Surface charge density σ = ε0E, so the small sphere has the larger σ.
  • On one conductor: sharper curvature (points, edges) → higher σ and stronger field.
  • Very strong fields at points can ionize the air: corona discharge, lightning rods.
Mission 1

Grounding

  • Grounding: connecting an object to the Earth with a conductor.
  • The Earth is a huge neutral conductor: it can give or take almost any amount of charge.
  • An isolated charged conductor, grounded (no other charges nearby), ends almost neutral.
  • Positive object: electrons flow up from the Earth. Negative object: electrons flow down to the Earth.
  • Ideal ground: potential fixed at V = 0, an infinite charge reservoir. A grounded conductor is held at V = 0, so far from other charges its charge must be zero.
Quick check
?A metal sphere on an insulating stand has a charge of +5.0 nC. It is then connected to Earth by a metal wire, with no other charged objects nearby. Which statement describes what happens?
Mission 1

Polarization and shielding

Polarized conductor and shieldUncharged metal sphere in a fieldE = 0uniform field far away →Hollow shell: the cavity is shieldedE = 0uniform field far away →Lines end on induced − and restart on induced+, at 90° to the surface. No field in themetal or the empty cavity.Field lines from the exact solution for aconducting sphere in a uniform field.
  • Neutral conductor in an external field: electrons shift, leaving − on one side, + on the other. It is polarized.
  • The induced charges' field cancels the external field inside the metal. The conductor stays one equipotential.
  • Field lines end on the induced − charge and restart on the + charge, meeting the surface at 90°.
  • Closed conducting shell: the field in an empty cavity is zero, whatever the outside field or the shell's own charge.
  • This is electrostatic shielding (a Faraday cage): a car body or a metal box protects what is inside.
Quick check
Cross section of a thick, hollow sphere labeled metal shell, drawn as a ring around an empty circular cavity; point P isPmetal shell
?The diagram shows electric field lines around a thick, uncharged, hollow metal sphere placed in a uniform external electric field, in electrostatic equilibrium. Point P is in the empty cavity. A student claims that the electric field at P is zero. Which reasoning best supports the claim?
Mission check

?Sphere A, of radius R, is charged until its potential is V0 (zero far away). Sphere B, of radius 3R and far from A, is separately charged until it is also at V0. The two spheres are then joined by a long, thin wire. What happens?
Mission 2Topic 10.3

Mission 2: A charged capacitor has no net charge at all. So what is it actually storing?

Make a guess: A charged capacitor has no net charge at all. So what is it actually storing?

Quick check
?Predict first. An uncharged parallel-plate capacitor is connected to a battery and left until it is fully charged. Which statement correctly describes how the capacitor becomes charged?
Mission 2

What a capacitor is

Charging a capacitor+−cellswitch+−+−+−+−+−+Q−Qno charge crosses the gapelectron flowArrows show electron flow.
  • Two conducting plates, separated by an insulator (air, a vacuum or a plastic film).
  • Connect a cell: electrons are pulled off one plate, pass round the external circuit, and are pushed onto the other plate.
  • No charge crosses the gap.
  • One plate ends at +Q, the other at −Q. Net charge: zero.
  • "The charge on a capacitor" means Q, the charge on each plate.
Mission 2

Capacitance

  • C = Q/ΔV: the charge on each plate per unit potential difference across the plates.
  • Unit: the farad. 1 F = 1 C/V: a capacitor storing 1 C on each plate for every 1 V across it.
  • 1 F is huge. Real values: μF (10⁻⁶ F), nF (10⁻⁹ F), pF (10⁻¹² F).
  • For one capacitor, Q ∝ ΔV. C is fixed by its construction, not by the potential difference you apply.
Mission 2

Worked example

  • A 470 μF capacitor is charged to 9.0 V.
  • Q = CΔV = 470 × 10⁻⁶ × 9.0 = 4.2 × 10⁻³ C on each plate.
  • Electrons moved from one plate to the other: 4.23 × 10⁻³ ÷ 1.60 × 10⁻¹⁹ ≈ 2.6 × 10¹⁶.
  • Charge it to 18 V instead: Q doubles; C stays 470 μF.
Quick check
?A parallel-plate capacitor is connected to an ideal 12 V battery. When the capacitor is fully charged, its positive plate carries a charge of 3.6 × 10⁻⁵ C. What is the capacitance of the capacitor?
Mission 2

What it stores: energy

Energy as the area under the graphΔVQ0potential difference ΔVcharge QΔQV·ΔQenergy= ½QΔVslope = 1/C
  • Separating +Q from −Q takes work. That work is stored as electric potential energy.
  • The stored energy equals the work done by an external agent to separate the charge.
  • Graph of ΔV against Q: a straight line through the origin (ΔV = Q/C).
  • Moving a small charge ΔQ when the potential difference is V takes work V·ΔQ: a thin strip under the line.
  • Add the strips: energy stored = area under the V–Q graph = area of a triangle.
  • UC = ½QΔV
Mission 2

Three forms, one example

  • Use Q = CΔV: UC = ½QΔV = ½C(ΔV)² = Q²/(2C).
  • The 470 μF capacitor at 9.0 V: energy = ½ × 470 × 10⁻⁶ × 9.0² = 1.9 × 10⁻² J.
  • At 18 V: the charge doubles and the potential difference doubles, so the energy is four times as much (7.6 × 10⁻² J).
  • Why ½? The battery moves charge Q through potential difference ΔV and transfers QΔV. The capacitor keeps ½QΔV; the other ½QΔV is dissipated as heat in the circuit's resistance.
Quick check
?A 220 μF capacitor is charged to a potential difference of 12 V. How much energy does it store?
Mission check

Graph of Q (μC) on the vertical axis against ΔV (V) on the horizontal axis. The horizontal axis is marked 2, 4, 6, 8, 10246810121020304050600Q (μC)ΔV (V)
?The graph shows the magnitude Q of the charge on each plate of a capacitor as a function of the potential difference ΔV across it. What electric potential energy is stored in the capacitor when ΔV = 6.0 V?
Mission 3Topics 10.3, 10.4

Mission 3: How can you get more charge onto a capacitor without raising the voltage?

Make a guess: How can you get more charge onto a capacitor without raising the voltage?

Mission 3

What sets C for parallel plates

What sets the capacitance of parallel platesdAreferenceCd2Aarea 2AC doubles2dAgap 2dC halvesEdge view; every pair holds the same charge.Field lines straight and evenly spaced.
  • Larger plate area A: the same charge is spread more thinly, so the field and potential difference are smaller. C ∝ A.
  • Smaller gap d → C ∝ 1/d.
  • C = κε0A/d (κ = 1 for air).
  • ε0 = 8.85 × 10⁻¹² C²/(N·m²): the permittivity of free space.
  • Plate thickness and the charge already stored do not matter.
Mission 3

Worked example

  • Air-filled plates, each 0.040 m², 1.0 mm apart.
  • C = 8.85 × 10⁻¹² × 0.040 ÷ 1.0 × 10⁻³ = 3.5 × 10⁻¹⁰ F (350 pF).
  • Connected to 12 V: Q = CΔV = 4.2 × 10⁻⁹ C.
  • Uniform field between the plates: E = Q/(ε0A) = 1.2 × 10⁴ V/m. Same as ΔV/d.
Quick check
?An air-filled parallel-plate capacitor has a capacitance of 16 pF. A second air-filled parallel-plate capacitor has plates with three times the area of the first capacitor's plates, and its plates are twice as far apart. What is the capacitance of the second capacitor?
Mission 3

Dielectrics

A dielectric filling the gap+−+−+−+−+−+−+−+Q−Qdielectricmaterialκair1.0006polyethylene2.3glass5 to 10water80
  • Fill the gap with an insulator, a dielectric: the capacitance increases.
  • Permittivity measures how strongly a material polarizes in an electric field. Free space: the constant ε0. Every material: a different, larger value.
  • Dielectric constant κ = ε/ε0: how many times larger C becomes when the material fills the gap.
  • Each multiplies C by about: air 1.0006 · polyethylene 2.3 · glass 5 to 10 · water 80.
Quick check
Diagram of two horizontal parallel plates. The top plate is marked + + + + + + + + (positive charge) and the bottom plat+ + + + + + + +− − − − − − − −dielectric
?The diagram shows a charged parallel-plate capacitor, disconnected from its battery, with a slab of dielectric filling the space between its plates. Which statement correctly describes the electric field produced inside the dielectric by the dielectric's own induced charges?
Mission 3

Why a dielectric helps

Polarization of a dielectricno fieldfield on+−+−+−+−plates' fieldinduced fieldnet fieldatom: nucleus and electron cloud
  • Charges in a dielectric cannot move freely through it. In a field, each molecule's charges shift slightly: the material polarizes.
  • Result: a thin layer of − charge faces the + plate, and + charge faces the − plate.
  • These induced charges make a field opposite to the plates' field. The field in the dielectric is weaker.
  • Same Q, weaker E → smaller potential difference across the gap → C = Q/ΔV is larger.
  • Still connected to the cell? The potential difference is fixed, so more charge flows on.
Mission 3

Gauss's law and κ

Gauss's law for parallel plates+−+−+−+−+−+−Gaussian surfaceE = Q/(ε0A)E = 0E = 0+−+−+−+−+−+−E0E =E0/κdielectric, κ = 2Isolated capacitor: same Q in both panels.
  • Each plate: surface charge density σ = Q/A. Gauss's law plus superposition: E = σ/ε0 = Q/(ε0A) between the plates, zero outside.
  • E ∝ σ. ΔV = Ed = Qd/(ε0A), so C = Q/ΔV = ε0A/d.
  • Isolated capacitor (Q fixed), dielectric inserted: the field falls from E0 to E. κ = E0/E.
  • The dielectric's own field: E0 − E0/κ = (1 − 1/κ)E0, opposite to E0.
  • ΔV falls by the factor κ, so C = κC0.
  • Spherical and coaxial capacitors use the same method.
Quick check
?An air-filled parallel-plate capacitor is connected to an ideal battery, and the charge on its positive plate is measured as 24 μC. A dielectric slab that fills the space between the plates is then inserted while the battery stays connected, and the charge on the positive plate becomes 72 μC. Which claim is supported by these measurements, with valid reasoning?
Mission check

?An air-filled parallel-plate capacitor is charged and then disconnected from the supply. Its plates are then pulled apart to twice their separation. What happens to the charge on each plate, the potential difference across the capacitor and the energy it stores?
Mission 4Topic 10.3

Mission 4: Make a capacitor twice as big in every direction. How much more charge does it store per volt?

Make a guess: Make a capacitor twice as big in every direction. How much more charge does it store per volt?

Mission 4

The recipe

Capacitance from fields: the recipe+Q and −Qon the two conductorsGauss’s law → E(r)in the gap; E ∝ QΔV = ∫E dr+ to −, along E; ΔV ∝ QC = Q/ΔVgeometry onlyQcancels
  • Put +Q on one conductor and −Q on the other.
  • Gauss's law → the field E(r) in the gap.
  • Integrate from the + conductor to the − conductor: ΔV = ∫E dr, along the field.
  • C = Q/ΔV. ΔV is proportional to Q, so Q cancels.
  • C depends only on geometry (and the material in the gap), never on the charge or the potential difference.
Quick check
?One plate of a parallel-plate capacitor carries a charge of +6.0 μC and the other carries −6.0 μC. The positive plate is at an electric potential of +2.5 V and the negative plate is at −1.5 V. What is the capacitance of the capacitor?
Mission 4

Parallel plates

Parallel-plate capacitor field+σ−σpillboxE = 0outsideE = 0outsideE = σ/ε₀dPillbox: one face inside the metal (E = 0),one in the gap: E = σ/ε₀ = Q/(ε₀A).Plates large compared with d: edge effectsignored.
  • Plates of area A, separation d ≪ plate size. Surface charge density σ = Q/A.
  • Field from Gauss's law (derived before): E = σ/ε0 = Q/(ε0A), uniform, proportional to σ.
  • ΔV = ∫0ᵈ E dx = Qd/(ε0A).
  • C = ε0A/d. With a dielectric filling the gap: C = κε0A/d.
Quick check
Edge views of three parallel-plate capacitors side by side, not to scale, each drawn as two horizontal plates. Capacitor+2Q−2QXarea Agap d+Q−QYarea 3Agap 2d+3Q−3QZarea Agap 3d
?The diagram shows three air-filled parallel-plate capacitors, X, Y and Z (not to scale), with the plate area, the plate separation and the charge on each plate labeled. Which ranking of their capacitances is correct?
Mission 4

Concentric spheres

Spherical capacitorarb+Q on sphere a−Q on shell bGaussian sphere rrEabE = kQ/r²00Field only in the gap: zero inside the innersphere and outside the shell.
  • Inner sphere radius a (+Q); thin outer shell radius b (−Q).
  • Gauss, a < r < b: only +Q enclosed, so E = kQ/r² (k = 1/(4πε0)).
  • ΔV = ∫ₐᵇ kQ/r² dr = kQ(1/a − 1/b) = kQ(b − a)/(ab).
  • C = ab/(k(b − a)) = 4πε0ab/(b − a).
  • Checks: b → ∞ gives 4πε0a, an isolated sphere. A thin gap, b − a = d ≪ a, gives ε0(4πa²)/d = ε0A/d ✓.
Quick check
?A capacitor consists of a metal sphere of radius 2.0 cm inside a thin, concentric metal shell of radius 3.0 cm, with air between them. The sphere carries charge +Q and the shell carries −Q. What is the capacitance? Use k = 9.0 × 10⁹ N·m²/C².
Quick check
?A coaxial cylindrical capacitor of length L consists of a metal cylinder of radius a inside a thin metal cylindrical shell of radius b, with vacuum between them; L is much greater than b. Using Gauss's law, which expression gives the capacitance?
Mission 4

Coaxial cylinders

Coaxial capacitorarbEnd viewrEabE ∝ 1/rdAℓSide view: Gaussian cylinder, radius r, length ℓEnds: E ⟂ dA, so no flux through them.
  • Inner cylinder radius a, outer shell radius b, length L ≫ b. Charge per length λ = Q/L.
  • Gauss (cylinder radius r, a < r < b): E = λ/(2πε0r). Falls as 1/r, not 1/r².
  • ΔV = ∫ₐᵇ λ/(2πε0r) dr = (λ/(2πε0)) ln(b/a).
  • C = 2πε0L/ln(b/a). Per unit length: 2πε0/ln(b/a).
  • Example: a = 0.50 mm, b = 2.0 mm, vacuum: C/L = 2π(8.85 × 10⁻¹²)/ln 4 = 40 pF per meter. A plastic filling (κ ≈ 2.3) gives about 92 pF per meter.
Mission check

?A coaxial capacitor has length L, inner radius a and outer radius 2a, with vacuum between the conductors. Which single change doubles its capacitance?
Recap

The big ideas

Mission 1

  • Conductors in contact share charge until they are at the same potential; joined spheres have Q ∝ R.
  • Grounding lets electrons flow to or from the Earth: an isolated charged conductor, grounded, ends almost neutral.
  • Sharp points have the highest charge density; a closed conducting shell shields its empty cavity from outside fields.

Mission 2

  • A capacitor's plates carry +Q and −Q; C = Q/ΔV, in farads, set by construction, not by the potential difference.
  • UC = ½QΔV: the work done separating the charge.

Mission 3

  • C = κε0A/d; E = Q/(ε0A); κ = ε/ε0 = E0/E; C = κC0.

Mission 4

  • C from fields: +Q and −Q, Gauss for E, ΔV = ∫E dr, C = Q/ΔV; Q cancels, so C depends only on geometry and the dielectric.
  • Parallel plates ε0A/d (E = σ/ε0); concentric spheres 4πε0ab/(b − a); coaxial 2πε0L/ln(b/a).
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Conductors and Capacitors for AP Physics C: E&M. 🎉

  1. Mission 1Two metal spheres, one big and one small, are joined by a wire. Which ends up with more charge?
  2. Mission 2A charged capacitor has no net charge at all. So what is it actually storing?
  3. Mission 3How can you get more charge onto a capacitor without raising the voltage?
  4. Mission 4Make a capacitor twice as big in every direction. How much more charge does it store per volt?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to AP Physics C: E&M