← AP Physics 1
⭐ 0
AP Physics 1 · Unit 2: Force and Translational Dynamics (part 2)
Mini-Lesson

AP® Physics 1 Unit 2: Force and Translational Dynamics (Part 2)

7 missions. Guess, learn, then check. Your place is saved.

Covers College Board topics 2.6–2.9

Short, curiosity-driven missions (about 20 minutes each) that teachers can assign. Use them alongside AP Classroom practice.

  1. Mission 1Astronauts float on the space station. How much weaker is Earth's gravity up there?
  2. Mission 2Can friction ever push an object forward, in the direction it is moving?
  3. Mission 3Why are the markings on a spring weighing scale evenly spaced?
  4. Mission 4A car rounds a bend at a steady speed. Is it accelerating, and if so, how much?
  5. Mission 5Whirl a ball on a string in a circle. Is anything pulling it outward?
  6. Mission 6Double a satellite's orbital radius. How many times longer does one orbit then take?
  7. Mission 7Drop a hammer and a feather where there is no air. Why do they hit the ground together?

AP® is a trademark registered by the College Board, which is not affiliated with, and does not endorse, this website.

Mission 1Topic 2.6

Mission 1: Astronauts float on the space station. How much weaker is Earth's gravity up there?

Make a guess: Astronauts float on the space station. How much weaker is Earth's gravity up there?

Mission 1

Newton's law of gravitation

Two spheres attract each otherFFlarger masssmaller massrEqual and opposite forces, even for unequalmasses. r is measured between the dots.
  • Every pair of masses attracts. Gravity never repels.
  • F = Gm1m2/r²
  • r: distance between the centers. G = 6.67 × 10⁻¹¹ N·m²/kg².
  • Acts along the line joining the centers. Each mass pulls the other equally hard (third law).
  • Inverse-square law: double r → force ÷ 4.
Mission 1

Spheres act as point masses

  • Outside a uniform sphere (or one made of uniform shells), its field is exactly that of a point mass at its center.
  • So for planets and stars, r is measured from the center, never from the surface.
Quick check
?Two objects exert gravitational forces of magnitude F on each other. The mass of each object is doubled, and the distance between their centers is tripled. What is the new magnitude of the gravitational force that each object exerts on the other?
Mission 1

Gravitational field strength

Gravitational field strengthplanetmass Mrtest mass mFg = F/mforce per unit mass
  • Gravitational field: a region where a mass experiences a force.
  • Field strength g = F/m: force per unit mass on a small test mass. Unit N/kg. Toward the mass.
  • Divide F = GMm/r² by m: g = GM/r².
  • Free fall: g in N/kg equals the acceleration in m/s².
  • Weight = the gravitational force by a planet on a nearby object: Fg = mg.
Quick check
?A ball is thrown straight up and rises 20 m above the ground before falling back. Earth's radius is 6.4 × 10⁶ m. Which statement about the gravitational force exerted on the ball by Earth during its flight is correct?
Mission 1

Field lines and the uniform field near the surface

Gravity near Earth's surfaceEarthg points toward the mass.g ≈ 10 N/kgApproximatelyconstant oversmall changesin height.
  • Near the surface, over a few kilometers, g barely changes: treat the field as uniform.
  • Near Earth's surface, g ≈ 10 N/kg. Over small changes in height the gravitational force is approximately constant.
Mission 1

Worked example: the space station

Gravity at the space stationEarthstation, 400 km up100%surface89%stationg (% of surface g)Drawn to scale: R = 6.37 × 10⁶ m, r =6.77 × 10⁶ m.
  • Earth's radius R = 6.37 × 10⁶ m. Station about 4.0 × 10⁵ m up: r = 6.77 × 10⁶ m from the center.
  • g ∝ 1/r²: gstation/gsurface = (6.37/6.77)² = 0.89.
  • gstation ≈ 0.89 × 10 ≈ 8.9 N/kg.
  • Gravity there is only about 11% weaker. Astronauts float because they are in free fall with the station.
Quick check
?An astronaut's weight at Earth's surface is W. Planet Q has three times Earth's mass and twice Earth's radius. What is the astronaut's weight at the surface of planet Q?
Mission check

A planet drawn as a circle, with its center marked by a dot and a line from the center to the surface labeled R. A dasheR4.5 N/kgPQ2R3R
?The diagram shows a planet of radius R and two points, P and Q, on a line through the planet's center. The arrow at P represents the planet's gravitational field at P, of magnitude 4.5 N/kg. What is the magnitude of the planet's gravitational field at Q?
Mission 2Topic 2.7

Mission 2: Can friction ever push an object forward, in the direction it is moving?

Make a guess: Can friction ever push an object forward, in the direction it is moving?

Quick check
Left: side view of a long board lying on a level floor, labeled board, with a smaller block, labeled block, resting on iblockboardvblockvboardStudent’s diagramFNFgFf
?Predict first. A board is pulled to the right along a level floor. A block resting on the board slides on it: at the instant shown, both move to the right, the board faster than the block, as the velocity arrows in the diagram show. A student draws the free-body diagram shown for the block. Which statement about the student's diagram is correct?
Mission 2

Which way does friction act?

Box on a faster beltboxvelocity of boxvelocity of beltbox relative to beltfriction on boxVelocity arrows to scale.
  • Friction acts parallel to the surfaces in contact.
  • It opposes the relative motion of the two surfaces (or the slipping that would happen without it).
  • Relative means: relative to the other surface, not to the ground.
  • Box on a belt that moves faster than the box: the box slips backward relative to the belt, so friction on the box points forward.
  • Kinetic friction does not depend (to a good approximation) on the area of contact.
Mission 2

Static friction

  • Surfaces not sliding relative to each other: static friction.
  • It is only as large as it needs to be, to stop slipping.
  • Push a heavy crate with 10 N: friction is 10 N. Push with 30 N: friction is 30 N.
  • It has a maximum:
  • Ff,s ≤ μs Fn
  • Push beyond the maximum: the surfaces start to slide.
Mission 2

Sliding friction

  • Surfaces sliding: kinetic friction, |Ff,k| = μk Fn.
  • μ has no unit: it is a ratio of two forces. It depends on the pair of materials.
  • Usually μs > μk: harder to start sliding than to keep sliding.
  • To a good approximation, sliding friction does not depend on speed.
Mission 2

Worked example

Friction against push02040608010012014016020406080100120push (N)friction (N)static: Ff,s = pushmaximum μsFn = 100 Nkinetic:μkFn = 80 NNormal force 200 N, μ = 0.50 static, 0.40sliding. Same scale on both axes.
  • Box on a level floor. Normal force on it: 200 N. μs = 0.50; μ for sliding = 0.40.
  • Maximum static friction = 0.50 × 200 = 100 N.
  • Push 60 N: no sliding. Friction = 60 N (not 100 N).
  • Push just over 100 N: the box starts to slide.
  • Sliding: friction = 0.40 × 200 = 80 N.
  • Keep pushing with 100 N: net force = 100 − 80 = 20 N forward. The box speeds up.
Quick check
?A 0.80 kg box rests on a level floor. The coefficients of friction between the box and the floor are μs = 0.60 and μk = 0.35. A student pushes the box horizontally, increasing the push slowly from zero. Use g = 10 m/s². What is the magnitude of the push when the box starts to slide?
Quick check
Graph of Friction force (N) on the vertical axis against Pull (N) on the horizontal axis. The horizontal axis is marked 4812164812Friction force (N)Pull (N)
?A block rests on a level table. A student pulls it with a horizontal force that increases slowly from zero, and a sensor records the friction force exerted on the block by the table. The block starts to slide when the pull reaches 12 N. The graph shows the friction force as a function of the pull. Which claim does the graph support?
Mission 2

The normal force is not always mg

The normal force in three casesmgFnLevel floorFn = mgmgmg cos θmg sin θFnθSlope at θFn = mg cos θmgFnTT sin θRope at θabove horizontalFn = mg − T sin θForces drawn from the center of the box.Components dashed. Arrows to scale within eachpanel.
  • Friction depends on the normal force: the push perpendicular to the surface.
  • Level floor, no other vertical forces: normal force = mg.
  • Slope at angle θ: normal force = mg cos θ. Less friction than on the level.
  • Pulled by a rope angled upward: the rope takes some of the weight. Normal force = mg − T sin θ.
  • Always find the normal force first, from the forces perpendicular to the surface.
Quick check
?A box of mass m is pushed across a level floor by a force of magnitude F directed at an angle θ below the horizontal. The box slides along the floor. The coefficients of static and kinetic friction between the box and the floor are μs and μk. Which expression gives the magnitude of the kinetic friction force exerted on the box?
Mission check

?A book lies on the flat bed of a pickup truck. The truck speeds up from rest along a straight, level road, and the book does not slide on the bed. Which statement about friction on the book is correct?
Mission 3Topic 2.8

Mission 3: Why are the markings on a spring weighing scale evenly spaced?

Make a guess: Why are the markings on a spring weighing scale evenly spaced?

Mission 3

Hooke's law

Natural length and extensionnaturallengthextensionforceno load
  • Stretch a spring: the force it exerts is proportional to its extension.
  • Extension = stretched length − original (natural) length. Not the whole length.
  • Fs = −kΔx. k is the spring constant.
  • Unit of k: N/m. Larger k: stiffer spring.
  • Works for compression too: the extension is then the decrease in length.
Quick check
?An ideal spring has a relaxed length of 10 cm. When it is stretched to a length of 14 cm, it exerts a force of magnitude 3.0 N on the object attached to it. What is the magnitude of the force it exerts when it is stretched to a length of 22 cm?
Mission 3

A restoring force

The restoring forcecompressednatural lengthno forcestretched0equilibriumxRed arrows: force exerted by the spring on theblock, to scale.
  • The minus sign: the spring's force is opposite to its displacement from equilibrium.
  • Stretched to the right: the spring pulls left. Compressed to the left: it pushes right.
  • Always toward the equilibrium (natural length) position: a restoring force.
  • At the natural length the spring exerts no force.
Quick check
?A block on a level surface with negligible friction is attached to two identical ideal springs; the other end of each spring is fixed to a wall, one on each side of the block. When the block is at its equilibrium position, both springs have their relaxed lengths. The block is pulled a distance d to the right and released from rest. Which statement describes the forces exerted on the block by the two springs just after it is released?
Mission 3

Worked example

  • A spring hangs with natural length 12.0 cm. A 4.0 N weight stretches it to 17.0 cm.
  • Extension = 17.0 − 12.0 = 5.0 cm = 0.050 m.
  • k = force ÷ extension = 4.0 ÷ 0.050 = 80 N/m.
  • Hang 6.0 N instead: extension = 6.0 ÷ 80 = 0.075 m = 7.5 cm.
  • New length = 12.0 + 7.5 = 19.5 cm. Always add the extension back to the natural length.
Mission 3

The force–extension graph

Force–extension graphextension (m)force (N)0ΔextensionΔforceslope = kstraight line through 0
  • Plot force against extension. Hooke's law: a straight line through the origin.
  • Slope = k.
Quick check
Graph with F (N), the magnitude of the spring force, on the vertical axis and L (cm), the length of the spring, on the h0.51.01.501020F (N)L (cm)
?The graph shows the magnitude F of the force exerted by an ideal spring as a function of the spring's length L, from its relaxed length to a length of 20 cm. What is the spring constant of the spring?
Mission 3

Ideal springs

  • An ideal spring: massless, and its force is proportional to its change in length.
  • Massless: the force is the same at both ends of the spring.
Mission check

?A spring that obeys Hooke's law is 15.0 cm long when it supports a 3.0 N load and 18.0 cm long when it supports a 6.0 N load. What is its natural (unloaded) length?
Mission 4Topic 2.9

Mission 4: A car rounds a bend at a steady speed. Is it accelerating, and if so, how much?

Make a guess: A car rounds a bend at a steady speed. Is it accelerating, and if so, how much?

Mission 4

Period, frequency, speed

  • Period T: time for one full revolution (s).
  • Frequency f: revolutions per second (Hz). f = 1/T.
  • One revolution = one circumference, 2πr. Constant speed: v = 2πr/T.
Quick check
?A runner jogs at a constant speed around a circular track, completing each lap in time T. She then jogs around a second circular track with 4 times the radius of the first, at twice her original speed. By what factor is the time for one lap multiplied?
Mission 4

Steady speed, changing velocity

Velocity changes on a bendv₁v₂Δvv₂−v₁Δvv₁ and v₂ have equal length. Δv = v₂ − v₁.
  • Velocity is a vector. Going around a circle, its direction keeps changing.
  • Changing velocity = acceleration, even at constant speed.
  • Draw v1 and v2 at two nearby points. The change, Δv = v2 − v1, points toward the center.
  • So the acceleration points to the center: centripetal acceleration.
  • It needs a net force toward the center.
Mission 4

Centripetal acceleration

  • ac = v²/r, toward the center. Using v = 2πr/T: ac = 4π²r/T².
  • Example: a child on a spinning playground ride, 1.5 m from the center, one revolution every 4.0 s.
  • v = 2πr/T = 2π × 1.5 ÷ 4.0 = 2.4 m/s.
  • a = v²/r = 2.36² ÷ 1.5 = 3.7 m/s², toward the center.
Quick check
?Car X rounds a curve of radius 50 m and car Y rounds a curve of radius 100 m. Both cars move at the same constant speed. How does the magnitude of car X's centripetal acceleration compare with that of car Y?
Mission 4

Speeding up on a circle

Speeding up on a circleacataSpeeding up:at along va points aheadof the radiusa = √(ac² + at²)
  • Speed changing → an extra component along the path: tangential acceleration, at = rate of change of speed.
  • Direction changing → centripetal acceleration, ac = v²/r, toward the center.
  • The two are perpendicular. Net acceleration = their vector sum: a = √(ac² + at²).
  • Speeding up: a points ahead of the center. Slowing down: behind it.
  • Only at constant speed does the acceleration point exactly at the center.
Quick check
?A car moves around a circular track of radius 12 m. At one instant its speed is 6.0 m/s, and its speed is increasing at a rate of 4.0 m/s². What is the magnitude of the car's acceleration at that instant?
Mission check

?A rider on a large amusement ride moves at constant speed in a horizontal circle of radius 16 m. The ride completes 3 revolutions every 30 s. What is the magnitude of the rider's acceleration?
Mission 5Topic 2.9

Mission 5: Whirl a ball on a string in a circle. Is anything pulling it outward?

Make a guess: Whirl a ball on a string in a circle. Is anything pulling it outward?

Mission 5

Centripetal force is the net force

The net force points inwardvelocitytensionTop viewball on a stringThe only horizontal force: tension, at 90° tothe velocity.
  • Circular motion at constant speed: acceleration v²/r toward the center.
  • Newton's second law: it needs a net force toward the center, often called the centripetal force.
  • Fnet = mac = mv²/r, toward the center.
  • It is perpendicular to the velocity: it changes the direction, not the speed.
  • It is not an extra force. It is the net force of real forces: tension, friction, gravity, normal force.
Mission 5

No outward force

When the string breaksstring breaks✓ along the tangent✗ along the radiusStraight line along the tangent (first law): nooutward force acts.
  • Nothing pulls the ball outward. The string pulls it inward.
  • Cut the string: the ball flies off along the tangent, in a straight line (first law). Not outward along the radius.
  • The "flung outward" feeling in a turning car: your body keeps going straight while the car turns under you.
  • On a free-body diagram, never draw a "centripetal force" arrow or a "centrifugal force" arrow. Draw only real forces.
Quick check
?A puck of mass 0.30 kg slides on a frictionless horizontal table. It is tied to a string that passes through a small hole in the table and is attached to a block, which hangs at rest below the table. The puck moves in a circle of radius 0.40 m, centered on the hole, at a constant speed of 1.6 m/s. Use g = 10 m/s². What is the mass of the hanging block?
Quick check
?A car travels at constant speed around a curve on a flat horizontal road; its path is part of a horizontal circle. Air resistance is negligible. Which statement about the horizontal forces on the car is correct?
Mission 5

Worked example: a car on a flat bend

A car on a flat bendweightnormalforcefriction, at the roadRear view← inside of the bendfrictionTop viewFriction = mv²/r = 1200 × 15² ÷ 50 = 5400 NIt is the only sideways force.
  • A 1200 kg car rounds a flat bend of radius 50 m at 15 m/s.
  • Only friction from the road acts sideways, so friction is the centripetal force.
  • F = mv²/r = 1200 × 15² ÷ 50 = 5400 N, toward the center.
  • If the greatest friction the tires can give is 7000 N: vmax = √(Fr/m) = √(7000 × 50 ÷ 1200) = 17 m/s.
  • Faster than that: friction cannot supply mv²/r, and the car skids toward the outside of the bend.
Mission 5

Vertical circles: top and bottom

Forces in a vertical circleFTFgFTFgtop: FT + Fg = mv²/rbottom: FT − Fg = mv²/rFNFgloop, at the top:FN + Fg = mv²/rleast speed: FN = 0,v = √(gr)Speeds taken equal for comparison (as for amotor-driven arm; mv²/r = 3mg); arrows toscale. Only real forces drawn.
  • Take toward the center as positive.
  • Bottom (center above): FT − Fg = mv²/r. Tension is more than the gravitational force.
  • Top (center below): FT + Fg = mv²/r. Tension is less than mv²/r.
  • Loop-the-loop, at the top: the track pushes down, FN + Fg = mv²/r.
  • Minimum speed at the top: FN = 0, so gravity alone gives mv²/r: mg = mv²/r → v = √(gr).
Quick check
?A toy car moves around the inside of a vertical circular loop of track with a diameter of 0.80 m. Friction is negligible. What is the minimum speed the car must have at the top of the loop to stay in contact with the track there? Use g = 10 m/s².
Mission 5

Banked curves and the conical pendulum

Banked curve and conical pendulumto the centerof the circleFNFgθBanked curve, no frictiontan θ = v²/(rg)θFTFgFT sin θFT cos θConical pendulumFT cos θ = mg; FT sin θ = mv²/r
  • Banked curve, no friction: only FN and Fg act. The circle is horizontal, so resolve horizontally and vertically.
  • Horizontal: FN sin θ = mv²/r. Vertical: FN cos θ = mg.
  • Divide: tan θ = v²/(rg). One speed needs no friction.
  • Conical pendulum: string at angle θ to the vertical; ball in a horizontal circle.
  • Vertical: FT cos θ = mg. Horizontal: FT sin θ = mv²/r.
Quick check
?A road is banked at 37° to the horizontal on a curve, lower on the inside of the curve. A car travels around the curve in a horizontal circle of radius 120 m. At what speed can the car round the curve with no friction force exerted on it by the road? Use g = 10 m/s², sin 37° = 0.60, and cos 37° = 0.80.
Quick check
?A highway curve is banked so that a car moving at 25 m/s can round it with no friction force from the road. Another car rounds the same curve at a constant 15 m/s without sliding. Air resistance and rolling friction are negligible. Which statement describes the static friction force exerted by the road on this slower car?
Mission 5

Banked curves with friction

Banked curves and the conical pendulumto the centerof the circleFNFgθBanked curve, no frictiontan θ = v²/(rg)fSlower:f up the slopefFaster:f down the slopeθFTFgFT sin θFT cos θConical pendulumFT cos θ = mg; FT sin θ = mv²/r
  • Slower than the no-friction speed: the car tends to slide down the bank. Static friction acts up the slope.
  • Faster: it tends to slide up. Static friction acts down the slope, adding to the inward force.
Mission check

?A car drives at constant speed over the top of a rounded hill in the road. Near the top, the road's vertical cross-section is a circular arc. The car stays in contact with the road. At the top, how does the normal force from the road compare with the car's weight?
Mission 6Topic 2.9

Mission 6: Double a satellite's orbital radius. How many times longer does one orbit then take?

Make a guess: Double a satellite's orbital radius. How many times longer does one orbit then take?

Mission 6

Gravity is the centripetal force

The only force in orbitplanetgravityvelocityno centrifugalforceOne force only: gravity provides thecentripetal force.
  • In a circular orbit, gravity is the only force on the satellite. It points to the center of the planet.
  • So gravity provides the centripetal force: GMm/r² = mv²/r.
  • There is no outward "centrifugal" force. The satellite is in free fall all the way around.
  • m cancels: the orbit does not depend on the satellite's mass.
  • Orbital speed: v = √(GM/r). Smaller orbit → faster.
  • Satellite and planet pull each other equally hard, but the planet's huge mass makes its acceleration negligible. Treat it as fixed.
Quick check
?An astronaut floats inside a space station that moves in a circular orbit about 400 km above Earth's surface. Which statement about the forces exerted on the astronaut is correct?
Mission 6

Deriving T² ∝ r³

Deriving T² ∝ r³GMm/r² = mv²/rv = 2πr/T → GM/r² = 4π²r/T²T² = (4π²/GM)r³r2rradius r: period Tradius 2r: period 2.8TT² rises 2³ = 8 times,T rises √8 ≈ 2.8 times(√8 = 21.5 = 2.83)
  • One orbit: distance 2πr in time T, so v = 2πr/T.
  • Substitute into GMm/r² = mv²/r:
  • GM/r² = 4π²r/T²
  • T² = (4π²/GM)r³
  • On the equation sheet: T² = (4π²/GM)R³, with R the orbit radius.
  • T² ∝ r³. The constant 4π²/GM depends only on the central mass.
  • Same law for moons of Jupiter or planets of another star; only the constant changes.
  • Double r: T² rises 2³ = 8 times, so T rises √8 ≈ 2.8 times.
Quick check
?Tethys and Rhea are moons of Saturn, and their orbits may be taken as circular. Tethys has an orbital radius of 2.95 × 10⁸ m and a period of 1.89 days. Rhea has an orbital radius of 5.27 × 10⁸ m. What is the period of Rhea?
Mission 6

Worked example: weighing the Earth

  • The Moon: r = 3.84 × 10⁸ m, T = 27.3 days.
  • T = 27.3 × 86 400 = 2.36 × 10⁶ s.
  • Rearrange: M = 4π²r³/(GT²).
  • M = 4π² × (3.84 × 10⁸)³ ÷ (6.67 × 10⁻¹¹ × (2.36 × 10⁶)²) = 6.0 × 10²⁴ kg.
  • Any orbiting body works: measure r and T (or v), get the central mass.
  • A graph of T² against r³ is a straight line through the origin; slope = 4π²/GM.
Quick check
Graph with T² (10⁹ s²) on the vertical axis against R³ (10²⁴ m³) on the horizontal axis. The horizontal axis is marked a1.02.03.04.00.400.801.20T² (10⁹ s²)R³ (10²⁴ m³)
?Astronomers measure the orbital period T and orbital radius R of several moons that move in circular orbits around a planet. The graph shows T² plotted against R³, with a best-fit line through the origin. What is the mass of the planet? Use G = 6.67 × 10⁻¹¹ N·m²/kg².
Mission check

?Two planets, P and Q, move in circular orbits around the same distant star. The orbital period of Q is 8.0 times the orbital period of P. What is the ratio (orbital radius of Q)/(orbital radius of P)?
Mission 7Topic 2.6

Mission 7: Drop a hammer and a feather where there is no air. Why do they hit the ground together?

Make a guess: Drop a hammer and a feather where there is no air. Why do they hit the ground together?

Mission 7

Two jobs for mass

Two kinds of masspush FnetaDeep spaceno planet nearbyFgNear Earthtoward Earth's centerEarthInertial massresists changes in motion:a = Fnet/mGravitational masssets the gravitationalpull:Fg = mg
  • Inertial mass: how strongly an object resists changes in its motion. a = Fnet/m.
  • Gravitational mass: how strongly it attracts, and is attracted by, other masses. Fg = Gm1m2/r², or Fg = mg near a planet.
  • Two different properties. Nothing in Newton's laws says they must be equal.
  • Inertia does not need gravity. A crate in deep space, far from any planet, is still hard to speed up.
  • A crate floating in a space station is in free fall: gravity still acts on it.
Quick check
?On the International Space Station, an astronaut has two closed toolboxes that look identical; one is full of tools and the other is empty. Both float freely. Which method would let her tell which toolbox is full?
Mission 7

Measuring each kind

  • Inertial: exert a known net force, measure the acceleration: m = Fnet/a.
  • Gravitational: an equal-arm balance compares the gravitational forces on two pans.
  • Balanced: mobject g = mstandard g, so the masses are equal, for any g.
Quick check
?On Earth, a rock on one pan of an equal-arm balance is balanced by 4.0 kg of standard masses on the other pan. The balance, the rock and the standard masses are taken to the Moon, where the gravitational field strength is 1.6 N/kg. Use g = 10 m/s² on Earth. What mass of standard masses balances the rock on the Moon?
Mission 7

Why everything falls together

  • Only gravity acts: a = Fg/minertial = (mgrav/minertial) × g.
  • If mgrav/minertial is the same for every object, every object falls with the same acceleration.
  • Tested for centuries, for many materials:
  • Galileo and Newton: pendulums of different materials.
  • Eötvös (early 1900s): torsion balance, equal to a few parts in a billion.
  • MICROSCOPE satellite (results 2022): equal to about 1 part in 10¹⁵.
  • So the two masses are experimentally equivalent. We use one word: mass.
Quick check
?Ball 1 has mass m and ball 2 has mass 3m. They are released from rest at the same height near Earth's surface, and air resistance is negligible. F1 and F2 are the magnitudes of the gravitational forces exerted on the balls by Earth, and a1 and a2 are the magnitudes of their accelerations. Which comparison is correct?
Mission 7

The equivalence principle

Two rooms you cannot tell apartAt rest on Earthball falls at10 m/s²scale: mggRocket, deep spaceaccelerating at10 m/s²scale: mgaFree fall near Earthgravity acts; allfall togetherscale: 0gFloating, deep spaceno gravity, noaccelerationscale: 0Top two: same reading, same fall.You cannot tell them apart.Bottom two: weightless either way.
  • Closed room, no windows, at rest on Earth: scale reads mg; a dropped ball accelerates at 10 m/s² toward the floor.
  • Same room in a rocket far from any planet, accelerating at 10 m/s²: the floor pushes you, and rises to meet the ball. Same scale reading, same fall.
  • In free fall in a field, or floating in deep space: weightless either way.
  • Equivalence principle: in a noninertial (accelerating) frame, you cannot tell apparent weight from a gravitational force.
  • It works because inertial and gravitational mass are equivalent. Einstein built general relativity on it.
Quick check
?A student wakes in a closed, windowless room. A ball she releases accelerates toward the floor at 4 m/s², measured relative to the room, and a scale under her reads 40% of her weight on Earth. Which situation could explain both readings?
Mission check

?Suppose that for lead only, gravitational mass were 1% larger than inertial mass, while for wood the two were equal. A lead ball and a wooden ball are released together in a vacuum near Earth's surface. How would they fall?
Recap

The big ideas

Mission 1

  • F = Gm1m2/r²: always attractive, inverse square, r between centers.
  • g = F/m = GM/r²; outside a sphere, treat it as a point mass at its center.

Mission 2

  • Friction acts parallel to the surfaces and opposes their relative slipping, so it can point forward (a box on a faster belt, a walking foot).
  • Static: Ff,s ≤ μs Fn, as large as needed. Kinetic: |Ff,k| = μk Fn. Usually μs > μk.

Mission 3

  • Extension (not length) is proportional to force: slope of the force–extension graph = k, in N/m.
  • The minus sign: the spring force is a restoring force, always toward the equilibrium position.

Mission 4

  • Constant speed in a circle means acceleration toward the center: a = v²/r.
  • If the speed is changing too, add a tangential component; the net acceleration no longer points at the center.

Mission 5

  • The centripetal force is the net force of the real forces, toward the center: Fnet = mv²/r. There is no outward force.
  • Vertical circle: bottom FT − Fg = mv²/r; top FT + Fg = mv²/r; minimum speed at the top of a loop v = √(gr).
  • Banked curve with no friction: tan θ = v²/(rg).

Mission 6

  • Gravity alone provides the centripetal force: GMm/r² = mv²/r, so T² = (4π²/GM)r³; the satellite's mass cancels.
  • v = √(GM/r): lower orbits are faster.

Mission 7

  • Inertial mass resists changes in motion; gravitational mass sets the gravitational pull. Experiments show they are equal, so all objects fall with the same acceleration when only gravity acts.
  • Equivalence principle: inside an accelerating room you cannot tell apparent weight from gravity.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Force and Translational Dynamics (part 2) for AP Physics 1. 🎉

  1. Mission 1Astronauts float on the space station. How much weaker is Earth's gravity up there?
  2. Mission 2Can friction ever push an object forward, in the direction it is moving?
  3. Mission 3Why are the markings on a spring weighing scale evenly spaced?
  4. Mission 4A car rounds a bend at a steady speed. Is it accelerating, and if so, how much?
  5. Mission 5Whirl a ball on a string in a circle. Is anything pulling it outward?
  6. Mission 6Double a satellite's orbital radius. How many times longer does one orbit then take?
  7. Mission 7Drop a hammer and a feather where there is no air. Why do they hit the ground together?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to AP Physics 1