← A-Level Physics · OCR · A-Level Physics revision
⭐ 0
OCR A-level Physics A (H556) · Module 4: 4.4 Waves (part 1)
Mini-Lesson

Waves (part 1)

5 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1Sing a higher note. Does the sound reach the far side of the room any sooner?
  2. Mission 2Two corks bob on the same ripple, half a wavelength apart. How do their movements compare?
  3. Mission 3You walk away from a small light source. How quickly does the light reaching you fade?
  4. Mission 4Radio waves and X-rays: the same kind of wave or not? And what really tells them apart?
  5. Mission 5Turning one filter against another can block light, but not sound. What does that tell us about light?
Mission 1

Mission 1: Sing a higher note. Does the sound reach the far side of the room any sooner?

Make a guess: Sing a higher note. Does the sound reach the far side of the room any sooner?

Quick check
?A loudspeaker plays a steady note to a listener 5 m away in a room with still air. Which of the following travels from the loudspeaker to the listener?
Mission 1

What a wave carries

Particles stay putstartlaterlater stillmarked point: same position,moves only up and downOrange arrow: one crest, moving alongwith the wave.
  • A progressive (travelling) wave transfers energy from place to place.
  • It does not transfer matter. Each particle oscillates about a fixed position.
Mission 1

Transverse and longitudinal

Transverse and longitudinal wavesTransverse (rope)oscillationenergy transferLongitudinal (air layers)CCRRRoscillationenergy transferC: compression (close, pressure higher)R: rarefaction (spread out, pressure lower)
  • Transverse: oscillations perpendicular to the direction of energy transfer. Waves on a string; all EM waves.
  • Longitudinal: oscillations parallel to the direction of energy transfer. Sound; a slinky pushed along its length.
  • Longitudinal waves have compressions (particles close, pressure higher) and rarefactions (spread out, pressure lower).
Mission 1

Describing a wave

Wavelength and amplitudepositiondisplacementλ (crest to crest)AA: from the rest line to a crest (not crestto trough).
  • Displacement: distance and direction of a particle from its rest position.
  • Amplitude A: maximum displacement.
  • Wavelength λ: distance between neighbouring points that move in step, e.g. crest to crest.
  • Period T: time for one complete oscillation. Frequency f: oscillations per second, in Hz.
  • f = 1/T.
Mission 1

The wave equation

  • In one period the wave moves on one wavelength: v = λ/T, so v = fλ.
  • For sound in air and waves on a string, the medium sets v and the source sets f.
  • Change f in the same medium: λ changes, v stays the same.
  • Example: sound at 340 m s⁻¹, f = 680 Hz → λ = 340/680 = 0.50 m.
Mission 1

Two graphs, two meanings

Two graphs of a waveSnapshot: displacement–positionposition / mdisplacement / mλwave travelsOne particle: displacement–timetime / sdisplacement / mTSame shape: check the x-axis label.
  • Displacement–position graph: a snapshot of the whole wave. Read λ and A.
  • Displacement–time graph: one particle over time. Read T and A.
  • Same shape, different axis: always check the x-axis label.
  • Particle direction: for a wave moving right, a point copies what the point just to its left did a moment ago.
Quick check
?A transverse wave travels along a stretched string. Adjacent crests are 1.2 m apart. A graph of displacement y against time t for one point on the string is a sine curve: y = 0 at t = 0, y is a maximum at t = 5 ms, y = 0 at t = 10 ms, y is a minimum at t = 15 ms and y = 0 at t = 20 ms, after which the pattern repeats. What is the wave speed?
Mission 1

Graphs of a longitudinal wave

Graph of a longitudinal waveLayers at restLayers displaced (+ = forwards)rest positiondisplacementcompressionrarefactionCompression: zero displacement, neighboursdisplaced towards it (graph goes + to −).Rarefaction: zero displacement, neighboursdisplaced away from it (graph goes − to +).
  • Plot displacement along the direction of travel (+ = forwards) against rest position.
  • The graph looks like a transverse wave, but the particles move along the axis.
  • Compression centre: displacement zero, with particles on both sides displaced towards it.
  • Rarefaction centre: displacement zero, with neighbours displaced away from it.
Quick check
?A sound wave travels in the +x direction through air. Displacements of air layers in the +x direction are positive. At one instant the graph of displacement s against rest position x is a sine curve: s = 0 at x = 0, s = −2.0 μm at x = 15 cm, s = 0 at x = 30 cm, s = +2.0 μm at x = 45 cm and s = 0 at x = 60 cm. Where, between x = 0 and x = 60 cm, is the centre of a rarefaction?
Mission check

?A vibrator sends waves along a stretched string at constant tension. At 25 Hz the wavelength is 0.80 m. The frequency is raised to 100 Hz. What is the new wavelength, and how long does a wave now take to travel 4.0 m along the string?
Mission 2

Mission 2: Two corks bob on the same ripple, half a wavelength apart. How do their movements compare?

Make a guess: Two corks bob on the same ripple, half a wavelength apart. How do their movements compare?

Mission 2

Phase

Phase difference on a waveSnapshot of a wave travelling to the rightpositiondisplacementwaveADCBA to B: λ, in phase (360°, 2π rad)A to C: λ/2, antiphase (180°, π rad)A to D: λ/4, 90° (π/2 rad)φ = 2πΔx/λ. Red arrows: velocity of eachparticle now.
  • Phase: how far through its cycle a particle is.
  • One cycle = 360° = 2π rad.
  • Points one wavelength apart move exactly together: in phase.
  • Points half a wavelength apart always move opposite ways: antiphase (180°, π rad).
Mission 2

Phase difference from distance

  • Fraction of a cycle = Δx/λ.
  • Phase difference φ = 2πΔx/λ (rad) = 360° × Δx/λ.
  • Example: λ = 0.80 m, points 0.20 m apart. Δx/λ = ¼ cycle = 90° = π/2 rad.
Quick check
?Two points on a progressive wave of wavelength 1.2 m are 0.40 m apart along the direction of travel. What is the phase difference between their oscillations?
Mission 2

Phase difference from graphs

Phase difference from two tracesdisplacementtime / ms2468101214160Δt = 2.0 msT = 8.0 msfirst trace: leadssecond traceφ = 2πΔt/T: 2.0/8.0 = ¼ cycle = 90°
  • Two displacement–time traces, same period T. Find the time shift Δt between matching points (crest to crest).
  • φ = 2πΔt/T = 360° × Δt/T.
  • Example: T = 8.0 ms; crests 2.0 ms apart → ¼ cycle = 90°.
  • On a displacement–position graph, use the separation Δx and λ instead.
  • The trace that reaches its crest first leads.
Quick check
?Two displacement–time graphs, P and Q, show the oscillations of two points on a wave. Both have a period of 6.0 ms. Each crest of Q comes 1.0 ms after the matching crest of P. What is the phase difference between P and Q?
Mission 2

Measuring frequency with an oscilloscope

Measuring frequency with an oscilloscopesignalgeneratorloudspeakerrulermic 1mic 2CH1CH2dual-trace oscilloscopeT = (divisions for several cycles × time-base)÷ number of cycles; f = 1/T.Move mic 2 back until the traces are in phaseagain: the distance moved is one wavelength.Schematic, not to scale.
  • Signal generator → loudspeaker. Microphone → oscilloscope.
  • Read the period: divisions for several cycles × time-base, then divide by the number of cycles.
  • f = 1/T. Compare with the signal generator's dial.
  • Two microphones on two channels: move one back until the traces are in phase again. The distance moved is one wavelength.
Mission check

?A loudspeaker emits a steady 500 Hz note. Two microphones are placed on a straight line from the loudspeaker, 0.17 m apart. The speed of sound is 340 m s⁻¹. How do the oscillations detected by the two microphones compare?
Mission 3

Mission 3: You walk away from a small light source. How quickly does the light reaching you fade?

Make a guess: You walk away from a small light source. How quickly does the light reaching you fade?

Mission 3

Intensity

Intensity on an areaFace-onSame area, tiltedarea Aarea Aperpendicular to thedirection of travel:receives power Pfewer rays hit it:less powerIntensity I = P/A, measured on an areaperpendicular to the wave.
  • Intensity: power arriving per unit area, on an area perpendicular to the wave's direction.
  • I = P/A. Unit: W m⁻².
  • Example: sound of intensity 5.0 × 10⁻³ W m⁻² arriving face-on at a 0.50 m² window delivers 2.5 × 10⁻³ W.
Quick check
?Sunlight of intensity 1.0 × 10³ W m⁻² falls perpendicularly on a flat solar cell of area 150 cm². At what rate does the sunlight deliver energy to the cell?
Mission 3

Spreading out

The inverse-square lawsourcerarea 12rarea 43rarea 9Intensity against distanceintensitydistancerI2rI/43rI/9Point source, no absorption, no reflections.
  • A small (point) source sends power P equally in all directions.
  • At distance r, that power is spread over a sphere of area 4πr².
  • I = P/(4πr²): double r → area × 4 → intensity ÷ 4. Triple r → ÷ 9.
  • This is the inverse-square law: I ∝ 1/r².
  • Assumes: point source, no absorption, no reflections.
Mission 3

Worked example

  • A small lamp radiates 3.0 W of light evenly in all directions.
  • At 2.0 m: I = 3.0 ÷ (4π × 2.0²) = 6.0 × 10⁻² W m⁻².
  • At 4.0 m: I = 3.0 ÷ (4π × 4.0²) = 1.5 × 10⁻² W m⁻²: a quarter.
  • At 6.0 m: 6.6 × 10⁻³ W m⁻²: a ninth of the value at 2.0 m.
Mission 3

Intensity and amplitude

Intensity and amplitudeamplitude Av×1amplitude 2Av×4intensitySame wavelength, same speed.I ∝ (amplitude)²: double A, 4× the intensity.
  • A wave's energy grows with its amplitude.
  • I ∝ (amplitude)². Double the amplitude → 4× the intensity.
Quick check
?A small source sends sound equally in all directions. At 2.0 m from the source, the amplitude of the sound wave is a. Ignoring absorption, what is the amplitude at 4.0 m?
Mission check

?A small source sends out sound equally in all directions. At 2.0 m from the source the intensity is 6.0 × 10⁻³ W m⁻². Ignoring reflections and absorption, what is the intensity 3.0 m from the source?
Mission 4

Mission 4: Radio waves and X-rays: the same kind of wave or not? And what really tells them apart?

Make a guess: Radio waves and X-rays: the same kind of wave or not? And what really tells them apart?

Quick check
?Predict first. Which statement describes the nature of electromagnetic waves?
Mission 4

What an EM wave is

An electromagnetic wavedirectionof travelEBλE and B perpendicular and in phase:peaks together (dashed lines)Arrows show the field at points along the lineof travel.
  • An electromagnetic (EM) wave is an oscillating electric field and an oscillating magnetic field, travelling together.
  • The two fields are perpendicular to each other and to the direction of travel: EM waves are transverse.
  • Energy travels along the direction of travel; the fields oscillate across it.
  • EM waves need no medium: they cross a vacuum.
  • In a vacuum all EM waves travel at the same speed, c = 3.00 × 10⁸ m s⁻¹, whatever their wavelength.
  • Examples: the radio waves from an FM radio station, visible light, the X-rays used in medical imaging.
Quick check
Electromagnetic spectrum drawn as a horizontal bar on a logarithmic scale of wavelength λ / m, increasing to the right ( 10⁻¹² 10⁻⁹ 10⁻⁶ 10⁻³ 10⁰ 10³ λ / m gamma UV IR radio X-ray microwave visible wavelength increases →
?Predict first. The diagram shows the regions of the electromagnetic spectrum on a logarithmic scale of wavelength λ (wavelength increases to the right). A wave has a wavelength of 2 × 10⁻⁵ m. In which region of the spectrum shown does it lie?
Mission 4

The spectrum, in order

The electromagnetic spectrumradiomicrowaveinfraredvisibleultravioletX-raygamma10³110⁻³10⁻⁶10⁻⁹10⁻¹²wavelength / m10⁶10⁹10¹²10¹⁵10¹⁸10²¹frequency / Hzwavelength decreasesfrequency and photon energy increaseVisible, expanded700 nm400 nmredvioletBoundaries are approximate; X-ray and gammaranges overlap.
  • Seven regions, by decreasing wavelength: radio, microwave, infrared, visible, ultraviolet, X-ray, gamma.
  • Same order: increasing frequency (f = c/λ) and increasing photon energy.
  • Visible light, longest to shortest: red, orange, yellow, green, blue, violet.
  • Visible runs from about 700 nm (red) to 400 nm (violet).
  • The regions differ only in wavelength (and so frequency). Same nature, same c.
  • Boundaries are not sharp. X-rays and gamma rays overlap: they are named by origin (X-rays from electrons, gamma rays from nuclei).
Mission 4

Orders of magnitude

  • Typical wavelengths (learn the power of ten):
  • Radio: 1 m (from about 0.1 m up to kilometres)
  • Microwave: 10⁻² m (1 mm to 0.1 m)
  • Infrared: 10⁻⁵ m (700 nm to 1 mm)
  • Visible: 5 × 10⁻⁷ m (400–700 nm)
  • Ultraviolet: 10⁻⁷ m (10–400 nm)
  • X-ray: 10⁻¹⁰ m (about 10⁻⁸ to 10⁻¹² m)
  • Gamma: 10⁻¹² m (below about 10⁻¹¹ m)
Mission check

?In a vacuum, the microwaves in a speed camera have a wavelength of 3.0 cm, and the light from a yellow lamp has a wavelength of 600 nm. How do their frequencies compare?
Mission 5

Mission 5: Turning one filter against another can block light, but not sound. What does that tell us about light?

Make a guess: Turning one filter against another can block light, but not sound. What does that tell us about light?

Mission 5

Plane polarised

Polarised and unpolarisedLooking along the beamunpolarisedmany directionsplane polarisedone directionLongitudinal wave (sound), side viewdirection of traveloscillations along the travelArrows: directions of oscillation (for light,the electric field).
  • Transverse wave: oscillations perpendicular to the direction of travel. They can point in many directions across it.
  • Plane polarised: the oscillations stay in one plane that contains the direction of travel.
  • For light (EM waves), the plane of oscillation is the plane of the electric field.
  • Unpolarised light (Sun, lamps): the oscillation direction changes rapidly and randomly.
  • Longitudinal wave: oscillations along the direction of travel. Only one direction is possible, so it cannot be polarised.
  • So: if a wave can be polarised, it must be transverse.
Quick check
View looking along the rope towards the board. The board is drawn as a shaded rectangle labelled board. A narrow slot isslotropeboardhand motionup
?Predict first. A long rope passes through a narrow slot in a board. The figure shows the view along the rope towards the board, with the slot and the direction in which a student moves the rope back and forth to send a transverse wave towards the board. Which describes the wave on the far side of the board?
Mission 5

A rope through a slot

A rope through a slotUp and down: passes, same amplitudeSide to side: no wave beyond the slotvertical slotRed arrows: direction the rope is shaken.
  • Shake a rope that passes through a vertical slot.
  • Shake it up and down: the wave passes through.
  • Shake it side to side: the slot stops the rope moving. No wave beyond the slot.
  • Shake it in every direction: only the up-and-down part gets through. The wave beyond is plane polarised.
Quick check
A lamp at the left sends a horizontal beam of light to the right. The beam passes point 1, then filter P₁, then point 2,123lampP₁P₂axis verticalaxis horizontal
?Predict first. Unpolarised light from a lamp passes through two ideal polarising filters, P1 and P2. The lines drawn on the filters in the figure show their transmission axes. I1, I2 and I3 are the intensities of the light at points 1, 2 and 3. Which ranking of the intensities is correct?
Mission 5

Polarising filters

Two polarising filtersAxes parallel: the light passespolarising filteranalyserlampI₀I₀/2I₀/2Axes crossed (90°): no lightI₀I₀/20Rotating the analyserintensity090180270360analyser angle / °Beam height shows intensity. Circles:oscillation direction, looking along the beam.
  • A polarising filter (Polaroid) lets through only oscillations along its transmission axis.
  • Unpolarised light in → plane polarised light out. An ideal filter passes half the intensity.
  • Add a second filter, the analyser. Axes parallel: the light passes on. Axes crossed (at 90°): no light gets through.
  • Rotate the analyser through a full turn: brightest at 0° and 180°, dark at 90° and 270°.
Mission 5

Microwaves and metal grilles

Microwaves and a metal grilleRods parallel to E: blockedEreceiver: zerotransmitterrods verticalRods perpendicular to E: passesEreceiver: signaltransmitterrods horizontal (seen at an angle)Opposite of the rope and slot: rods parallel toE block the microwaves.
  • A school microwave transmitter sends out plane-polarised microwaves (λ ≈ 3 cm).
  • Rotate the receiver about the line between them: signal maximum when aligned, zero at 90°. Microwaves are transverse.
  • A metal grille (parallel rods) between them:
  • Rods parallel to the electric field: microwaves blocked. The field drives electrons along the rods, which absorb and reflect the energy.
  • Rods perpendicular to the electric field: microwaves pass.
  • This is the opposite of the rope and slot. Learn it separately.
Mission check

?A student looks at a calculator's display through a polarising filter and slowly rotates the filter. The display is bright, goes dark after 90° of rotation, and is bright again after 180°. What does this show?
Recap

The big ideas

Mission 1

  • A progressive wave transfers energy, not matter. Transverse: oscillation ⟂ travel; longitudinal: oscillation ∥ travel.
  • f = 1/T and v = fλ. For sound and waves on strings, the medium sets v and the source sets f.

Mission 2

  • Phase difference φ = 2πΔx/λ = 2πΔt/T, in radians; × 360°/2π for degrees. λ apart: in phase. λ/2 apart: antiphase.

Mission 3

  • Intensity I = P/A (W m⁻²), measured on an area perpendicular to the wave.
  • Point source, no absorption: I = P/(4πr²), so I ∝ 1/r².
  • I ∝ amplitude².

Mission 4

  • EM waves: oscillating E and B fields, perpendicular to each other and to the direction of travel (transverse); no medium; all travel at c = 3.00 × 10⁸ m s⁻¹ in a vacuum.
  • Radio → microwave → infrared → visible → UV → X-ray → gamma: wavelength falls, frequency rises.

Mission 5

  • Plane polarised: oscillations in one plane. Only transverse waves can be polarised, so polarisation is evidence that light (and all EM waves) are transverse.
  • Crossed polarising filters block all the light; rotating one varies the intensity from maximum to zero every 90°.
  • Metal grille: blocks microwaves when its rods are parallel to the electric field.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Waves (part 1) for OCR A-level Physics. 🎉

  1. Mission 1Sing a higher note. Does the sound reach the far side of the room any sooner?
  2. Mission 2Two corks bob on the same ripple, half a wavelength apart. How do their movements compare?
  3. Mission 3You walk away from a small light source. How quickly does the light reaching you fade?
  4. Mission 4Radio waves and X-rays: the same kind of wave or not? And what really tells them apart?
  5. Mission 5Turning one filter against another can block light, but not sound. What does that tell us about light?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to A-Level Physics · OCR