← A-Level Physics · OCR · A-Level Physics revision
⭐ 0
OCR A-level Physics A (H556) · Module 5: 5.3 Oscillations
Mini-Lesson

Oscillations

6 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1Why does an oscillating mass on a spring move fastest at the one point where no overall force acts on it?
  2. Mission 2Two identical oscillators start a moment apart. What single number says how far out of step they are?
  3. Mission 3Take a pendulum clock to the Moon. Does it run fast, run slow, or keep time?
  4. Mission 4A mass on a spring keeps stopping and starting again. Where is its energy at the instant it stops?
  5. Mission 5Why can small pushes, timed just right, build up a huge swing?
  6. Mission 6Engineers add damping to bridges, cars and doors. How much damping is just right?
Mission 1

Mission 1: Why does an oscillating mass on a spring move fastest at the one point where no overall force acts on it?

Make a guess: Why does an oscillating mass on a spring move fastest at the one point where no overall force acts on it?

Mission 1

What makes motion simple harmonic

Restoring forceequilibrium−A0force zero+A/2+Arestoring force: towards equilibrium,∝ displacementweightBouncing ball (elastic):periodic, not SHMforce (weight) constant,not ∝ displacementForce arrows to scale (proportional todisplacement).
  • Periodic motion: repeats in equal time intervals. SHM is a special case. Every SHM is periodic; not every periodic motion is SHM.
  • Equilibrium position: where the object would rest; the restoring force is zero there.
  • Restoring force: always points back towards equilibrium, opposite to the displacement.
  • SHM: the restoring force is proportional to the displacement from equilibrium.
  • Condition: a ∝ −x
Mission 1

Describing an oscillation

  • Displacement x: distance from equilibrium, with a sign (+ one side, − the other).
  • Amplitude A: maximum displacement.
  • Period T: time for one complete cycle. Frequency f: cycles per second (Hz). T = 1/f.
  • Angular frequency ω = 2π/T = 2πf, in rad s⁻¹. One cycle = 2π rad.
Quick check
?Each object below is displaced and released, and then moves back and forth. Which one moves with simple harmonic motion?
Mission 1

The defining equation

Acceleration against displacementxa−A+A+ω²A−ω²Agradient = −ω²
  • a = −ω²x
  • The minus sign: acceleration always points opposite to the displacement, towards equilibrium.
  • It does not mean "slowing down": moving towards equilibrium, the object speeds up.
  • a against x: a straight line through the origin with a negative gradient.
  • Gradient of the a–x graph = −ω².
Mission 1

Worked example

  • f = 2.5 Hz → ω = 2π × 2.5 = 15.7 rad s⁻¹.
  • At x = +0.030 m: a = −ω²x = −(15.7)² × 0.030 = −7.4 m s⁻² (towards equilibrium).
  • At x = 0: a = 0.
Mission 1

x, v and a against time

x, v and a against time0T/4T/2Tx+A−Avatx = 0at −AAt ±A: v = 0, |a| max.At x = 0: |v| max, a = 0.Shapes only: each graph has its own verticalscale.
  • Released from rest at x = +A at t = 0: x–t is a cosine curve.
  • v = gradient of x–t. v–t is a negative sine curve, a quarter cycle ahead of x.
  • a = gradient of v–t. a–t is x–t upside down, because a = −(constant)x.
  • At x = ±A: v = 0, |a| maximum (pointing inwards).
  • At x = 0: |v| maximum, a = 0.
  • Speeding up when moving towards equilibrium; slowing down when moving away.
Quick check
Position–time graph with x on the vertical axis and t on the horizontal axis (no numerical scale). The vertical axis is +A+A/20−AxtRQP
?The graph shows the position x of an object in simple harmonic motion as a function of time t. Points P, Q and R are marked on the graph. Let aP, aQ and aR be the magnitudes of the object's acceleration at P, Q and R. Which of the following ranks them?
Mission 1

Displacement as a function of time

Cosine and sine starts0.050−0.0500.250.50t / sx / mx = A cos ωtT = 0.50 s0.015 m at 0.10 s0.050−0.0500.250.50t / sx / mx = A sin ωtReleased from rest at x = +AStarts at x = 0, moving in the + direction
  • x = A cos ωt: at t = 0, x = +A.
  • Or x = A sin ωt: at t = 0, x = 0.
  • Calculator in radians.
  • A = 0.050 m, f = 2.0 Hz, t = 0.10 s: x = 0.050 cos(2π × 2.0 × 0.10) = 0.050 cos(1.26 rad) = 0.015 m.
Mission 1

Maximum speed and acceleration

  • vmax = ωA, at x = 0.
  • amax = ω²A, at x = ±A.
  • Same oscillator: A = 0.050 m, f = 2.0 Hz → ω = 2π × 2.0 = 12.6 rad s⁻¹.
  • vmax = 12.6 × 0.050 = 0.63 m s⁻¹. amax = 12.6² × 0.050 = 7.9 m s⁻².
Quick check
?An object in SHM has a maximum speed vmax and a maximum acceleration of magnitude amax. Which expression gives the period T of the motion?
Mission check

?A pendulum bob swings to and fro in a small arc. At the lowest point of its swing, what are its acceleration along its path and its speed?
Mission 2

Mission 2: Two identical oscillators start a moment apart. What single number says how far out of step they are?

Make a guess: Two identical oscillators start a moment apart. What single number says how far out of step they are?

Mission 2

Phase and phase difference

Phase differencextATΔtPQΔt = T/8, so Δφ = 2π × 1/8 = π/4Δφ = 2πΔt/T
  • Phase: how far through a cycle an oscillator is, as an angle. One cycle = 2π rad.
  • Phase difference between two oscillators with the same T: Δφ = 2π × Δt/T.
  • Δt = time between matching points (e.g. each one's maximum displacement).
  • In phase: Δφ = 0 (or 2π, 4π…). Antiphase: Δφ = π.
Quick check
?Two oscillators, P and Q, each have a time period of 0.80 s. Q reaches its maximum positive displacement 0.20 s after P does. What is the phase difference between P and Q, in radians?
Mission 2

Worked example

  • A = 0.040 m, T = 0.80 s, released from rest at x = +A at t = 0. ω = 2π/T = 7.85 rad s⁻¹.
  • x at t = 0.10 s: x = 0.040 cos(7.85 × 0.10) = 0.040 cos(0.785 rad) = 0.028 m.
  • First time at x = +0.020 m: cos ωt = 0.020/0.040 = 0.50 → ωt = 1.05 rad → t = 1.05 ÷ 7.85 = 0.13 s.
  • Calculator in radians for every step.
Quick check
?An object in SHM is released from rest at x = +0.060 m at time t = 0 and oscillates about x = 0 with a period of 1.2 s. What is the object's position at t = 0.20 s?
Mission 2

Isochronous oscillators

Two amplitudes, same periodxtTTlarge amplitudesmall amplitudeSame period T: zero crossings line up.
  • In SHM the period does not depend on the amplitude: an isochronous oscillator.
  • Larger amplitude → larger restoring force → larger speeds. More distance, covered faster: same T.
  • Test: time 20 oscillations at two different amplitudes. Same T.
  • A real pendulum is isochronous only for small amplitudes.
Quick check
Position–time graph with a legend above it: Trial 1 is the solid line and Trial 2 the dashed line. x (m) is on the verti0.100.050−0.05−0.100.40.81.21.6x / mt / sTrial 1Trial 2
?A student sets the same block–spring system oscillating twice, with different amplitudes. The graph shows the block's position x as a function of time t for trial 1 (solid line) and trial 2 (dashed line). Which claim is supported by the graph?
Mission check

Two floatsdisplacementt / s00.100.200.300.400.500.600.70PQ
?The graph shows displacement against time for two identical floats, P and Q, bobbing on water. Read the graph. What is the phase difference between the two floats?
Mission 3

Mission 3: Take a pendulum clock to the Moon. Does it run fast, run slow, or keep time?

Make a guess: Take a pendulum clock to the Moon. Does it run fast, run slow, or keep time?

Mission 3

What sets the period?

What sets the periodChangePeriodMass on a springMore masslongerStiffer springshorterLarger gsameLarger amplitudesamePendulumLonger stringlongerLarger gshorterHeavier bobsameLarger (small) amplitudesame
  • Mass on a spring: longer with more mass; shorter with a stiffer spring. Unchanged by g and by amplitude.
  • Pendulum: longer with a longer string; shorter where g is larger. Unchanged by the bob's mass and by small changes of amplitude.
  • Large swings (beyond about 10°): a pendulum's period grows slightly. The motion is no longer quite SHM.
Mission 3

Measuring the period

Measuring the period of a pendulumclamplstopwatch: time 20 oscillationsfiducial marker atequilibrium
  • Time many oscillations (e.g. 20) and divide. Repeat and average.
  • Start and stop as the mass passes equilibrium, at a fiducial marker: it moves fastest there, so the instant is sharp.
  • Pendulum: keep angles small; measure l to the centre of the bob.
  • PAG10: change one factor at a time (mass, length, amplitude) and measure T.
Quick check
?A pendulum has a period of about 1.5 s and is timed with a hand-held stopwatch. Which method gives the most precise value of the period?
Mission check

?A pendulum clock keeps correct time at sea level. It is taken to the top of a high mountain, where g is slightly smaller. The length of its pendulum does not change. What happens to the clock?
Mission 4

Mission 4: A mass on a spring keeps stopping and starting again. Where is its energy at the instant it stops?

Make a guess: A mass on a spring keeps stopping and starting again. Where is its energy at the instant it stops?

Quick check
?A mass on a horizontal spring moves with simple harmonic motion on a frictionless surface; air resistance is negligible. Which statement about the energy of the oscillator is correct?
Mission 4

Energy swaps back and forth

Energy at the turning points and at equilibriumkineticpotentialtotalAt −A: at rest0At equilibrium: fastest0At +A: at rest0−A0+ATotal the same inevery row
  • Total energy = Ek + Ep
  • At ±A (turning points): at rest. Kinetic energy zero; potential energy maximum = the total.
  • At equilibrium: fastest. Kinetic energy maximum; potential energy minimum.
  • Potential energy: in the spring (mass–spring) or gravitational (pendulum).
  • Undamped: the total stays constant. Energy is only exchanged.
Mission 4

Energy against displacement

Energy against displacementenergyx−A+A0totalkineticpotentialAt every x: kinetic + potential = total
  • Potential energy: a U-shaped parabola, zero at x = 0, maximum at ±A.
  • Kinetic energy: an upside-down parabola, maximum at x = 0, zero at ±A.
  • Total: a horizontal line. At every x, kinetic + potential = total.
  • Mass–spring: elastic potential energy E = ½kx²
Mission 4

Energy against time

Energy against timeDisplacement x+A−AEnergy0T/2TtttotalkineticpotentialTwo peaks each per period; never negative;sum constant.
  • Kinetic and potential energy each rise and fall twice per period: two peaks per cycle.
  • Both are never negative: each is 0 at its minimum.
  • When one is at a peak, the other is zero. Their sum is constant.
  • (x = A cos ωt gives PE ∝ cos²ωt and KE ∝ sin²ωt.)
Quick check
Graph of Eₚ (J) on the vertical axis against x (m) on the horizontal axis. The vertical axis is marked 0 at the horizont0.400−0.10−0.0500.050.10Eₚ / Jx / mtotal energy
?A block attached to an ideal spring oscillates on a horizontal surface with negligible friction. The graph shows the elastic potential energy Ep of the block–spring system as a function of the block's position x, measured from equilibrium; the curve is a parabola, and the dashed line shows the system's total energy. What is the kinetic energy of the block when it is at x = 0.050 m?
Mission 4

Total energy and amplitude

  • At x = ±A all the energy is potential.
  • Mass–spring: Etotal = ½kA².
  • E ∝ A²: double the amplitude → four times the energy, twice the maximum speed.
  • Halfway out (x = A/2): PE = ¼ of the total. KE = ¾, not ½.
Mission 4

Speed from energy

  • Energy at any x: ½mv² = ½k(A² − x²). With k = mω²:
  • v = ±ω√(A² − x²). At x = 0: vmax = ωA.
  • ± because the mass passes each x moving both ways.
Mission 4

Worked example

  • m = 0.50 kg on a spring, k = 200 N m⁻¹, amplitude 0.060 m.
  • Total = ½kA² = ½ × 200 × 0.060² = 0.36 J.
  • At x = 0.030 m: PE = ½ × 200 × 0.030² = 0.090 J → KE = 0.36 − 0.090 = 0.27 J.
  • Speed: ½ × 0.50 × v² = 0.27 → v = 1.0 m s⁻¹.
  • Check: ω = 20 rad s⁻¹ (= √(k/m)). v = 20 × √(0.060² − 0.030²) = 1.0 m s⁻¹. ✓
Quick check
?A mass of 0.25 kg on a spring of spring constant 16 N m⁻¹ oscillates with simple harmonic motion of amplitude 0.050 m. What is its speed when its displacement is 0.030 m?
Mission check

?A glider on an air track is attached between two springs and oscillates with simple harmonic motion of amplitude 0.10 m. Friction is negligible. At what distance from the equilibrium position are the glider's kinetic energy and the elastic potential energy of the system equal?
Mission 5

Mission 5: Why can small pushes, timed just right, build up a huge swing?

Make a guess: Why can small pushes, timed just right, build up a huge swing?

Mission 5

Free and forced oscillations

Free and forced oscillationspull,releaseFreeForcedsignalgeneratorvibrationgeneratortimeat f0, naturaltimeat f, the driverdisplacementdisplacement (steady)
  • Free oscillation: displace it, let go, no further force. It oscillates at its natural frequency, f0.
  • Forced oscillation: a periodic driving force keeps acting.
  • Once steady, a forced system oscillates at the driving frequency, not at f0.
Quick check
?A lightly damped mass–spring system has a natural frequency of 2.0 Hz. It is driven by a periodic force of constant amplitude with a frequency of 3.5 Hz. Which describes its oscillation once the amplitude has become steady?
Mission 5

Resonance

Resonance curveamplitudedriving frequencyf0resonancenot zeropush at the same pointof every cyclePushes at the natural frequency add energyevery cycle.
  • Resonance: driving frequency = natural frequency → maximum amplitude.
  • Why: each push is in step with the motion, so the driver does positive work on every cycle. Energy builds up.
  • Amplitude–driving frequency graph: small at low frequency, a peak at f0, then falls towards zero at high frequency.
  • The peak height is limited by damping: the amplitude stops growing when energy lost per cycle = energy supplied per cycle.
Quick check
?In its spin cycle, a washing machine's drum speeds up steadily. At one rotation rate the whole machine shakes violently; at higher rates it runs smoothly again. Why does it shake at that one rate?
Mission 5

Damping

Light, critical and heavy dampingdisplacementtimelight: decays inside the envelopecritical: back fastest, no overshootheavy (over-damping): creeps back slowly
  • Damping: a resistive force (air resistance, friction, a fluid) takes energy out of the oscillation. The energy ends up as thermal energy of the surroundings.
  • Undamped: kinetic ⇄ potential energy, total energy constant. Damped: total energy falls, so the amplitude falls.
  • Light damping: keeps oscillating; amplitude decays gradually; period almost unchanged.
  • Critical damping: returns to equilibrium in the shortest time, without oscillating.
  • Heavy damping (also called over-damping): no oscillation; creeps back more slowly than critical.
Quick check
Graph of displacement x (vertical axis) against t / s (horizontal axis marked 0, 2, 4, 6, 8). All three curves start at t / sx24680XYZ
?The graph shows displacement–time curves X, Y and Z for the same mass–spring system, released from rest at the same displacement with three different amounts of damping. Which statement about the curves is correct?
Mission 5

Damping changes the resonance curve

Damping and the resonance curveamplitudedriving frequencyf0lightmediumheavyMore damping: lower, broader peak,at a slightly lower frequency.
  • More damping:
    • lower peak (smaller maximum amplitude),
    • broader, flatter curve: the resonance is less sharp,
    • peak at a slightly lower frequency.
  • Light damping: tall, sharp peak, very close to f0.
  • Far from f0 (very low or very high driving frequency), damping makes little difference.
Quick check
?The same oscillator is driven by a periodic force of the same constant amplitude in two experiments, X and Y, with different damping. In X the maximum amplitude is 25 mm, at 5.00 Hz, and the amplitude falls to half this value at 4.82 Hz and 5.17 Hz. In Y the maximum amplitude is 3.4 mm, at 4.89 Hz, and the amplitude falls to half this value at 3.3 Hz and 6.1 Hz. Which conclusion do the data support?
Mission check

?A singer shatters a wine glass by singing one steady note close to it. Which condition is essential for this to happen?
Mission 6

Mission 6: Engineers add damping to bridges, cars and doors. How much damping is just right?

Make a guess: Engineers add damping to bridges, cars and doors. How much damping is just right?

Mission 6

Seeing resonance: Barton's pendulums

Barton's pendulumsdriver(heavy)Same length as the driver (same f0):largest amplitude.Light paper-cone pendulums, lengthsincreasing left to right.
  • One heavy driver pendulum and several light pendulums of different lengths, all hung from one string.
  • The driver forces every light pendulum at the driver's frequency.
  • The light pendulum of the same length as the driver (same f0) swings with the largest amplitude: resonance.
  • Make the light bobs from paper cones (more damping): every amplitude falls, and the "winner" stands out less. The resonance is less sharp.
Mission 6

Investigating damping of a spring

Investigating damping of a springmasscard discmotion sensor→ data logger−80−4004080displacement / mmtime80645141TTTEach peak = 0.8 × the one before. Peaksequally spaced: same period.Illustrative data.
  • Mass on a spring. Add a card disc to increase air resistance.
  • Record amplitude after each oscillation: a motion sensor and data logger, or video against a ruler.
  • Light damping: the amplitude falls by roughly the same fraction each cycle (an exponential-style decay).
  • Illustrative data: 80, 64, 51, 41 mm. Each is 0.8 × the one before.
  • Bigger card → bigger fraction lost each cycle.
Quick check
?A lightly damped mass–spring system is released with an amplitude of 60 mm. After one complete oscillation its amplitude is 45 mm. The amplitude falls by the same fraction in each oscillation. What is the amplitude after three complete oscillations?
Mission 6

Where the energy goes

Energy in dampingTotal oscillation energy (% of start)100%start64%cycle 141%cycle 226%cycle 3Amplitude × 0.8 each cycle, so energy × 0.8²= 0.64 (E ∝ A²).Lost energy → thermal energy in thesurroundings.
  • Damped: work done against resistive forces → thermal energy in the surroundings. Total energy falls, so A falls (energy ∝ amplitude²).
Quick check
?Damping reduces the amplitude of a mass–spring oscillator from 40 mm to 20 mm. What fraction of the original oscillation energy has been transferred to the surroundings?
Mission 6

Critical damping at work

Damping a car suspensioncar bodyspringshockabsorberbody heighttimeleveltoo little damping: keeps bouncingclose to critical: settles fastesttoo much damping: slow returnBody pushed up by a bump, then released.
  • Car suspension: spring + shock absorber (a damper: oil forced through small holes).
    • Too little damping: the car keeps bouncing after a bump.
    • Too much: the wheel cannot follow the road; bumps are passed straight to the car body.
    • Designed close to critical: returns to level quickly with little or no bounce.
  • Door closers: close without slamming or swinging past.
  • Analogue meters: the pointer settles on its reading quickly, without wobbling.
Mission 6

Designing against resonance

Footbridge fixesView along the bridge (deck end-on)sideways swaydamperssideways swaystiffening bracesFix 1: damp itenergy removedFix 2: move f0stiffer → higher f0
  • Avoid: bridges, buildings, machinery and vehicle parts must not have f0 near a driving frequency they meet (walkers, wind, engines, earthquakes).
  • Fix 1: damp it. Millennium Bridge (2000): dampers added under the deck; the sway stopped.
  • Fix 2: move f0. Stiffer structure → higher f0; added mass → lower f0.
  • Useful: tuning circuits (radio); musical instruments.
Quick check
?A car's wing mirror buzzes violently at one engine speed. A rubber damper is fitted to the mirror's mounting. What happens now as the engine passes that speed?
Mission check

?A seismometer has a heavy mass on a spring, with adjustable damping. After a sudden jolt, with the damping set low, the mass swings past its rest position and back several times before it settles. The damping is then increased in small steps. Which describes how the mass's motion changes?
Recap

The big ideas

Mission 1

  • SHM: restoring force ∝ displacement, always towards equilibrium.
  • a = −ω²x, with ω = 2π/T = 2πf.
  • Fastest at equilibrium (a = 0); at rest at ±A (|a| largest). v = gradient of x–t; a = gradient of v–t.
  • vmax = ωA; amax = ω²A.

Mission 2

  • Phase difference Δφ = 2π Δt/T (radians); in phase 0, antiphase π.
  • SHM is isochronous: T does not depend on amplitude.

Mission 3

  • Spring: no g, no amplitude. Pendulum: no mass, no (small) amplitude.

Mission 4

  • KE and PE swap twice per cycle; the total is constant if there is no damping. At ±A all PE; at equilibrium all KE.
  • Mass–spring: Etotal = ½kA²; PE = ½kx².
  • v = ±ω√(A² − x²); vmax = ωA.

Mission 5

  • A forced oscillator settles at the driving frequency; resonance (maximum amplitude) happens when the driving frequency equals the natural frequency.
  • More damping: lower, broader resonance peak at a slightly lower frequency. Light damping oscillates and decays; critical returns fastest without oscillating; heavy (over-) damping returns slowly.

Mission 6

  • Damping removes energy (E ∝ A²); light damping cuts the amplitude by roughly the same fraction each cycle. Suspensions, door closers and meters are damped close to critical.
  • Harmful resonance is prevented by adding damping or moving f0 away from the driving frequency.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Oscillations for OCR A-level Physics. 🎉

  1. Mission 1Why does an oscillating mass on a spring move fastest at the one point where no overall force acts on it?
  2. Mission 2Two identical oscillators start a moment apart. What single number says how far out of step they are?
  3. Mission 3Take a pendulum clock to the Moon. Does it run fast, run slow, or keep time?
  4. Mission 4A mass on a spring keeps stopping and starting again. Where is its energy at the instant it stops?
  5. Mission 5Why can small pushes, timed just right, build up a huge swing?
  6. Mission 6Engineers add damping to bridges, cars and doors. How much damping is just right?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to A-Level Physics · OCR