← A-Level Physics · OCR · A-Level Physics revision
⭐ 0
OCR A-level Physics A (H556) · Module 4: 4.3 Electrical circuits
Mini-Lesson

Electrical circuits

4 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1One dead bulb can put out a whole string of lights, yet home lamps work on their own. Why?
  2. Mission 2Put one cell in backwards in a pack of three. What happens to the total voltage?
  3. Mission 3Why do a car's headlights dim while its starter motor is turning?
  4. Mission 4A street lamp switches itself on at dusk. How does its circuit sense that it is getting dark?
Mission 1

Mission 1: One dead bulb can put out a whole string of lights, yet home lamps work on their own. Why?

Make a guess: One dead bulb can put out a whole string of lights, yet home lamps work on their own. Why?

Mission 1

Closed, open, short

Closed, open and short circuits(a) closed+lamp lit(b) open+no current(c) short circuit+lamp: no currentArrows: conventional current, + to −.Symbol keycellbatteryresistorswitch (open)variable resistorAammeterlampVvoltmeter
  • Charge flows only round a closed loop.
  • A gap anywhere in a loop (open circuit): no current in that loop.
  • Short circuit: a wire straight across a component. No potential difference across it, so no current through it.
Mission 1

Circuit diagrams

  • A circuit diagram shows what connects to what, not where things sit.
  • Conventional current flows from + to − round the external circuit.
  • A diagonal arrow through a symbol = variable component.
  • Ideal wires have no resistance. An ideal cell has no internal resistance.
Quick check
?Three circuits are each made from an identical cell of negligible internal resistance, a resistor and a lamp. In circuit 1 the three form a single closed loop. Circuit 2 is the same loop with an open switch added. Circuit 3 is the same loop as circuit 1 with a wire of negligible resistance connected directly across the lamp's terminals. Which ranks the currents I1, I2 and I3 in the lamps of circuits 1, 2 and 3?
Mission 1

Two conservation laws

Junction and loop3 A in2 A out1 A outin = out: 3 = 2 + 16 V2 V4 V+loop: 6 = 2 + 4
  • Junction: total current in = total current out. Charge is conserved: none piles up.
  • Closed loop: sum of emfs = sum of potential differences. Energy is conserved: each coulomb gains in the cell what it loses in the components.
  • These are Kirchhoff's first law and Kirchhoff's second law.
  • Current is not used up. Energy is transferred.
Quick check
?A 9.0 V supply of negligible internal resistance is connected to three resistors in series. The potential differences across two of them are 2.0 V and 4.5 V. What is the potential difference across the third resistor?
Mission 1

Series and parallel

Series and parallelSeriesIIIIV₁V₂VSame current I everywhere. V = V₁ + V₂ParallelII₁I₂VVVSame V across each branch. I = I₁ + I₂string of lights: serieshouse lamps: parallelone pathfull supply pd each
  • Series: one path. Same current everywhere. pds add: V = V1 + V2.
  • Parallel: separate branches. Same pd across each. Currents add: I = I1 + I2.
  • Series: R = R1 + R2 + … Parallel: 1/R = 1/R1 + 1/R2 + …
  • Parallel: more paths, so the total is less than the smallest branch resistance.
  • Home lamps are in parallel: each has the full supply potential difference, whatever the others do.
Mission 1

Where the formulas come from

  • Series, same I. Energy: V = V1 + V2.
  • So IR = IR1 + IR2 → R = R1 + R2.
  • Parallel, same V. Charge: I = I1 + I2.
  • So V/R = V/R1 + V/R2 → 1/R = 1/R1 + 1/R2.
Quick check
?Resistors of 3.0 Ω, 6.0 Ω and 8.0 Ω are connected in parallel. What is the equivalent resistance of the combination?
Mission 1

Worked example

Worked example circuit6.0 V1.0 Ω2.0 V3.0 Ω4.0 V6.0 Ω4.0 V2.0 A1.3 A0.67 A2.0 V + 4.0 V = 6.0 V1.3 A + 0.67 A = 2.0 A
  • 6.0 V supply, negligible internal resistance. A 1.0 Ω resistor in series with 3.0 Ω and 6.0 Ω in parallel.
  • Parallel pair: 1/R = 1/3.0 + 1/6.0 → 2.0 Ω.
  • Total: 1.0 + 2.0 = 3.0 Ω. Supply current: 6.0 ÷ 3.0 = 2.0 A.
  • Potential difference across the pair: 2.0 × 2.0 = 4.0 V. Across the 1.0 Ω: 2.0 V. Sum: 6.0 V.
  • Branch currents: 4.0 ÷ 3.0 = 1.3 A; 4.0 ÷ 6.0 = 0.67 A. Sum: 2.0 A.
Mission 1

Meters

Connecting metersAVammeter: in serieslampvoltmeter: across the lampIdeal ammeter: zero resistance.Ideal voltmeter: infinite resistance.
  • Ammeter: in series. Ideal: zero resistance, so it does not change the current.
  • Voltmeter: in parallel, across the component. Ideal: infinite resistance, so it draws no current.
  • Treat meters as ideal unless told otherwise.
  • Real meters change the circuit a little: a real ammeter adds resistance; a real voltmeter draws some current.
Quick check
?A student wants to measure the current in a lamp and the pd across it, but connects the meters the wrong way round. The circuit is: a cell, a voltmeter and the lamp connected in series in a single loop, with an ammeter connected in parallel with the lamp. Both meters are ideal. What does the student observe?
Mission check

?Three identical lamps are connected to a supply of negligible internal resistance: lamp A is in series with lamps B and C, which are in parallel with each other. The filament of lamp C breaks. What happens to the brightness of lamps A and B? (Assume each lamp's resistance stays the same.)
Mission 2

Mission 2: Put one cell in backwards in a pack of three. What happens to the total voltage?

Make a guess: Put one cell in backwards in a pack of three. What happens to the total voltage?

Mission 2

Applying the two laws

  • Kirchhoff's first law: Σ current in = Σ current out at a junction (charge).
  • Kirchhoff's second law: round any closed loop, Σ emf = Σ IR (energy).
  • Pick a direction round the loop. Crossing a cell from − to + in that direction: +emf. From + to −: −emf.
  • A current you guessed the wrong way comes out negative. That is fine.
Mission 2

Cells together

Cells in seriesSeries, all the same way+−+1.5 V+−+1.5 V+−+1.5 V1.5 + 1.5 + 1.5 = 4.5 VMiddle cell reversed+−+1.5 V+−−1.5 V+−+1.5 V1.5 − 1.5 + 1.5 = 1.5 VLong line = positive terminal.
  • Series, all the same way: emfs add. Three 1.5 V cells → 4.5 V.
  • One cell reversed: its emf subtracts. 1.5 + 1.5 − 1.5 = 1.5 V.
Quick check
?Three cells are connected in series in a single line: two of emf 1.5 V face one way, and one of emf 2.0 V faces the other way. What is the total emf of the line?
Mission 2

Worked example: two emfs

A circuit with two emfs+−3.0 Ω9.0 VI₁+−3.0 Ω6.0 VI₂1.0 ΩI₁ + I₂Left loop: 9.0 = 3.0I₁ + 1.0(I₁ + I₂)Right loop: 6.0 = 3.0I₂ + 1.0(I₁ + I₂)I₁ = 2.0 A, I₂ = 1.0 A, middle 3.0 A
  • Left branch: 9.0 V cell, 3.0 Ω. Right branch: 6.0 V cell, 3.0 Ω. Middle branch: 1.0 Ω. Both cells' + terminals face the top junction.
  • Currents I1 (left, up) and I2 (right, up). Middle: I1 + I2 down (first law).
  • Left loop: 9.0 = 3.0I1 + 1.0(I1 + I2).
  • Right loop: 6.0 = 3.0I2 + 1.0(I1 + I2).
  • Solve: I1 = 2.0 A, I2 = 1.0 A, middle 3.0 A.
  • Check: 3.0 × 2.0 + 1.0 × 3.0 = 9.0 V; 3.0 × 1.0 + 1.0 × 3.0 = 6.0 V.
Quick check
?A 9.0 V cell and a 3.0 V cell, both of negligible internal resistance, are connected in a single loop with their emfs opposing each other. The total resistance in the loop is 4.0 Ω. What is the current?
Quick check
?A 12 V dc supply of negligible internal resistance is connected to a 4.0 Ω resistor in series with a parallel combination of a 6.0 Ω resistor and a 12 Ω resistor. What is the current in the 12 Ω resistor?
Mission check

?A 15 V supply charges a 12 V battery. They are connected in a single loop, positive terminal to positive terminal, and the total resistance in the loop is 2.0 Ω. What is the current, and which way does it pass through the battery?
Mission 3

Mission 3: Why do a car's headlights dim while its starter motor is turning?

Make a guess: Why do a car's headlights dim while its starter motor is turning?

Mission 3

emf and internal resistance

A real cellreal cell (dashed box)+−emf 1.5 Vr = 0.50 ΩR = 2.5 ΩI = 0.50 AVreads the terminal pd: 1.25 VEnergy per coulomb (J C⁻¹ = V)gained: emf 1.5terminal pd 1.25 (outside)lost volts Ir = 0.25 (inside r)
  • emf: energy transferred to each coulomb of charge by the source.
  • A real cell has internal resistance r. Model: an ideal cell in series with r.
  • With a current, some energy per coulomb is dissipated inside the cell. That pd is the lost volts, Ir.
  • Terminal pd = emf − lost volts.
Mission 3

Terminal potential difference

  • E = I(R + r) and E = V + Ir. Ir = lost volts.
  • No current: terminal pd = emf.
Quick check
?A battery with an internal resistance of 0.50 Ω drives a current of 0.60 A through a lamp, and an ideal voltmeter across the battery's terminals reads 4.2 V. The lamp is then disconnected, so that only the voltmeter remains connected across the battery. What does the voltmeter now read?
Mission 3

Worked example

  • Cell: emf 1.5 V, internal resistance 0.50 Ω. External resistor: 2.5 Ω.
  • Current = emf ÷ total resistance = 1.5 ÷ (2.5 + 0.50) = 0.50 A.
  • Lost volts = Ir = 0.50 × 0.50 = 0.25 V.
  • Terminal pd = 1.5 − 0.25 = 1.25 V.
  • Check: IR = 0.50 × 2.5 = 1.25 V.
Quick check
?A battery of emf 9.0 V and internal resistance 0.50 Ω is connected to a 4.0 Ω resistor. What is the terminal potential difference of the battery?
Mission 3

Consequences

Starter motor and headlightsheadlightsMswitchstarter motorrcar batteryTerminal pdopenclosedlights dimSwitch closed: large motor current, morelost volts.Bar lengths are qualitative.
  • More current → more lost volts → lower terminal pd.
  • A starter motor draws a very large current. The battery's terminal pd drops, so the headlights dim.
  • Short circuit (R = 0): current = emf ÷ r. Small r → a very large current; the cell heats up.
  • Car batteries need a small r to deliver large currents. High-voltage lab supplies have a large r so the current stays safe.
Quick check
?Cells P and Q have the same emf. P has a smaller internal resistance than Q. Each cell is connected in turn to the same lamp. Which statement is correct?
Mission 3

Measuring emf and r

Measuring emf and r+−Aswitchvariable resistorVacross the cellV / VI / A0intercept = emfgradient = −rV = −rI + emfSketch, no data.
  • Cell, variable resistor and ammeter in series. Voltmeter across the cell's terminals.
  • Change the resistance: record terminal pd V and current I each time.
  • V = −rI + emf: plot V against I. Straight line.
  • y-intercept = emf. Gradient = −r.
  • Switch off between readings: a warm cell's r changes.
  • This is part of PAG3.
Quick check
Graph of terminal pd V / V on the vertical axis (ticks at 0.5, 1.0, 1.5) against current I / A on the horizontal axis (tI / AV / V0.51.01.52.02.50.51.01.5
?The graph shows how the terminal pd V of a cell varies with the current I that it delivers. What is the internal resistance of the cell?
Mission check

?A battery of internal resistance r is connected to an external resistor whose resistance equals r. The external resistor is then replaced by one of resistance 2r. How does the potential difference across the terminals of the battery change?
Mission 4

Mission 4: A street lamp switches itself on at dusk. How does its circuit sense that it is getting dark?

Make a guess: A street lamp switches itself on at dusk. How does its circuit sense that it is getting dark?

Mission 4

Sharing a pd

Potential divider+−VinR₁R₂IIVoutSame current I in both. Vout is the pdacross R₂ only.
  • Two resistors in series across a supply Vin carry the same current.
  • So the pd splits in proportion to resistance. Bigger R, bigger share.
  • Vout = R2/(R1 + R2) × Vin, with Vout taken across R2.
  • V1/V2 = R1/R2.
Mission 4

Worked example

  • 12 V supply, negligible internal resistance. R1 = 2.2 kΩ, R2 = 3.3 kΩ. Find the pd across R2.
  • Vout = 3.3/(2.2 + 3.3) × 12 = 7.2 V.
  • The pd across R1 is 12 − 7.2 = 4.8 V. Ratio 4.8 : 7.2 = 2.2 : 3.3.
Quick check
?An LDR and a 300 Ω resistor are in series across a 6.0 V supply of negligible internal resistance. In the room's light the LDR's resistance is 900 Ω. What does an ideal voltmeter across the 300 Ω resistor read?
Mission 4

Potentiometer

Potentiometer+−Vinuniform tracksliding contactABVreads the pd between A andthe sliderUniform track: pd from A ∝ distance from AVin0pdABdistance from A
  • A resistance track across the supply, with a sliding contact.
  • Output between one end and the slider: any pd from 0 to Vin.
  • Uniform track: pd ∝ length from that end.
Quick check
?A potentiometer has a uniform resistance track connected across a 9.0 V dc supply of negligible internal resistance. An ideal voltmeter is connected between one end of the track and the sliding contact, which is one third of the way along the track from that end. What does the voltmeter read?
Mission 4

Sensors in a divider

Thermistor and LDRNTC thermistorLDRresistancetemperaturefalls as it warmsresistancelight intensityfalls in brighterlightSketch graphs, no scale.
  • NTC thermistor: R falls as temperature rises.
  • LDR: R falls as light gets brighter.
  • Put one in a divider: when its R changes, its share of the pd changes.
  • A component's pd rises when its share of the total R rises.
Mission 4

Control circuits

Sensing circuits(a) Dusk lamp: Vout across the LDR+−VinvariableLDRVoutswitchingcircuitlampDarker → LDR's R up → Vout up → lamp on.(b) Heating: Vout across the thermistor+−VinvariablethermistorVoutswitchingcircuitheaterColder → thermistor's R up → Vout up →heater on.
  • Dusk lamp: Vout across the LDR. Darker → LDR's R up → Vout up → switches the lamp on.
  • Heating control: Vout across the thermistor. Colder → R up → Vout up → switches the heater on.
  • Make the fixed resistor variable to set the switching point.
  • Vout goes to a switching circuit, not straight to the lamp or heater.
Quick check
?An LDR and a 10 kΩ fixed resistor are in series across a 6.0 V supply of negligible internal resistance. An ideal voltmeter is connected across the fixed resistor. The LDR's resistance is 50 kΩ in the dark and 1.0 kΩ in bright light. What does the voltmeter read in each case?
Mission 4

Calibrating a thermistor

Calibrating a thermistorfixed resistor+−VVoutthermistorstirrerthermometerheat slowlywaterCalibration curveVouttemperature θVout across the fixed resistor rises as θrises.
  • PAG4: build divider and sensing circuits; measure Vout with a digital voltmeter.
  • Heat the water slowly and stir. Record Vout at each temperature.
  • Plot Vout against θ: the calibration curve.
  • Then a Vout reading gives the temperature: a thermostat can switch at a set Vout.
Mission check

?An NTC thermistor and a fixed resistor are in series across a supply of constant pd. An ideal voltmeter is connected across the thermistor. The thermistor is warmed. What happens to the voltmeter reading?
Recap

The big ideas

Mission 1

  • Junction: current in = current out (charge). Loop: emfs = sum of potential differences (energy).
  • Kirchhoff's first and second laws.
  • Series: same I, pds add, R = R1 + R2. Parallel: same V, currents add, 1/R = 1/R1 + 1/R2.
  • Ideal ammeter: zero resistance, in series. Ideal voltmeter: infinite resistance, in parallel.

Mission 2

  • Emfs in series add; a reversed emf subtracts.
  • Kirchhoff's laws solve circuits with more than one emf: one equation per junction and per loop.

Mission 3

  • E = I(R + r) = V + Ir; Ir = lost volts.
  • Graph of V against I: intercept = emf, gradient = −r.

Mission 4

  • Vout = R2/(R1 + R2) × Vin: series resistors share the pd in proportion to resistance.
  • Thermistor or LDR in a divider: its share of the pd changes with temperature or light.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Electrical circuits for OCR A-level Physics. 🎉

  1. Mission 1One dead bulb can put out a whole string of lights, yet home lamps work on their own. Why?
  2. Mission 2Put one cell in backwards in a pack of three. What happens to the total voltage?
  3. Mission 3Why do a car's headlights dim while its starter motor is turning?
  4. Mission 4A street lamp switches itself on at dusk. How does its circuit sense that it is getting dark?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to A-Level Physics · OCR