← A-Level Physics · Eduqas · A-Level Physics revision
⭐ 0
Eduqas A-level Physics (A420QS) · Component 1: Newtonian Physics (part 6)
Mini-Lesson

Newtonian Physics (part 6)

2 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1Under the same Sun, beach sand gets scorching while the sea stays cool. Why?
  2. Mission 2How do you measure the energy a material needs, when some always leaks away?
Mission 1

Mission 1: Under the same Sun, beach sand gets scorching while the sea stays cool. Why?

Make a guess: Under the same Sun, beach sand gets scorching while the sea stays cool. Why?

Mission 1

Specific heat capacity

Sand and sea in the Sun1 kg of sand1 kg of watersame energy to eachbig risesmall risec ≈ 800c ≈ 4200c: specific heat capacity in J kg⁻¹ K⁻¹(approximate values). Sand warms about 5times as much.
  • Specific heat capacity, c: energy needed to raise the temperature of 1 kg by 1 K. Unit: J kg⁻¹ K⁻¹.
  • Q = mcΔθ
  • Water: c ≈ 4200 J kg⁻¹ K⁻¹. Dry sand: about 800. Same energy per kg → water warms about one fifth as much.
  • A change of 1 °C is a change of 1 K: Δθ needs no conversion.
Mission 1

Worked example

  • 0.500 kg aluminium block, 20 °C → 45 °C. c = 900 J kg⁻¹ K⁻¹.
  • Temperature rise: 45 − 20 = 25 K.
  • Energy: 0.500 × 900 × 25 = 1.1 × 10⁴ J (11 250 J).
  • With a 50 W heater and no losses: t = 11 250 ÷ 50 = 225 s.
Quick check
?An electric kettle heats 250 g of water from 18 °C to 90 °C. The specific heat capacity of water is 4.18 × 10³ J kg⁻¹ K⁻¹. How much energy is transferred to the water? Ignore energy transferred to the kettle and surroundings.
Mission check

?0.20 kg of water and 0.20 kg of cooking oil, both at 20 °C, are each supplied with 12 kJ of energy. Specific heat capacities: water 4180 J kg⁻¹ K⁻¹, oil 2000 J kg⁻¹ K⁻¹. Assume no energy is lost. Which statement about their final temperatures is correct?
Mission 2

Mission 2: How do you measure the energy a material needs, when some always leaks away?

Make a guess: How do you measure the energy a material needs, when some always leaks away?

Mission 2

Electrical method for c

Electrical method for specific heat capacityVApower supplyheaterthermometeraluminium blockinsulationθ / °Ct / sΔtΔθlaggradient = Δθ/Δt of the straight partc = VI ÷ (m × gradient)
  • Metal block (known mass), wrapped in insulation. Holes for an immersion heater and a thermometer (a drop of oil helps contact).
  • Heater circuit: ammeter in series, voltmeter across the heater. Or a joulemeter.
  • Energy supplied: E = VIt.
  • Record temperature every 30 s. Plot θ against t.
  • Use the gradient of the straight part: c = VI ÷ (m × gradient). This avoids the early lag while the heater warms up.
Mission 2

Worked example

  • 1.00 kg aluminium block. Heater: 12.0 V, 4.00 A → P = 48.0 W.
  • Gradient of θ–t graph: 0.0500 K s⁻¹.
  • c = 48.0 ÷ (1.00 × 0.0500) = 960 J kg⁻¹ K⁻¹.
  • Data-book value ≈ 900. Measured value is too high: some energy went to the surroundings, so less raised the block's temperature.
Quick check
?A 0.80 kg copper block is heated by a 24 W electrical heater. On the straight part of its temperature–time graph, the temperature rises at 0.075 K s⁻¹. What is the specific heat capacity of copper from these data?
Mission check

?A student uses the electrical method to find the specific heat capacity of a brass block. Her value is 10% higher than the data-book value. Which change to her method would most reduce this difference?
Recap

The big ideas

Mission 1

  • Q = mcΔθ. Same energy and mass: lower c, bigger temperature rise.

Mission 2

  • Electrical method: E = VIt; c = P ÷ (m × gradient of θ–t). Energy lost to the surroundings makes c come out too high: insulate.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Newtonian Physics (part 6) for Eduqas A-level Physics. 🎉

  1. Mission 1Under the same Sun, beach sand gets scorching while the sea stays cool. Why?
  2. Mission 2How do you measure the energy a material needs, when some always leaks away?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to A-Level Physics · Eduqas