← A-Level Physics · Eduqas · A-Level Physics revision
⭐ 0
Eduqas A-level Physics (A420QS) · Component 3: Light, Nuclei and Options (part 2)
Mini-Lesson

Light, Nuclei and Options (part 2)

6 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1Two slits, a laser and a ruler: how can stripes on a wall measure a wavelength far thinner than a hair?
  2. Mission 2How do you measure the wavelength of light with two slits, and why did it take so long to be believed?
  3. Mission 3How can a slide ruled with thousands of fine lines measure the wavelength of light?
  4. Mission 4Why does a flute or a guitar string sound only certain notes, never the ones in between?
  5. Mission 5How can stationary waves measure a wave's speed without timing anything?
  6. Mission 6How can light stay trapped inside a thin glass strand, even when the strand bends?
Mission 1

Mission 1: Two slits, a laser and a ruler: how can stripes on a wall measure a wavelength far thinner than a hair?

Make a guess: Two slits, a laser and a ruler: how can stripes on a wall measure a wavelength far thinner than a hair?

Quick check
?Predict first. Monochromatic light passes through two very narrow slits and falls on a distant screen, producing a pattern of bright and dark bands. Which explanation accounts for this pattern?
Mission 1

Young's double slit

Young's double-slit set-uplaserdouble slitscreenPTwo paths to P, a bright fringe: pathdifference λ (here n = 1).Bright fringe: path difference nλ. Dark: (n+ ½)λ. Middle fringe: bright (pathdifference 0).Not to scale: the screen is much moredistant than the slit separation (break inthe axis).
  • Monochromatic light (e.g. a laser) → two narrow slits, very close together → a screen far away.
  • Light diffracts (spreads out) from each slit. The two spreading waves overlap and interfere.
  • Both slits are lit by the same wavefronts, so they act as coherent sources.
  • Bright fringe: path difference nλ. Dark fringe: path difference (n + ½)λ.
  • Result: equally spaced bright and dark fringes, with a bright fringe in the centre.
Mission 1

The fringe-spacing equation

Double-slit geometrya = slitseparationD = slits-to-screen distanceΔy = fringe spacingNot to scale: D ≫ a.
  • Fringe spacing = λ × (slits-to-screen distance) ÷ (slit separation).
  • λ = aΔy/D: a = slit separation, Δy = fringe spacing, D = slits-to-screen distance.
  • Valid when the screen is far away compared with the slit separation (small angles).
Mission 1

Worked example

  • Laser light of wavelength 633 nm. Slits 0.50 mm apart. Screen 2.00 m from the slits.
  • Δy = λD/a = (633 × 10⁻⁹ × 2.00)/(0.50 × 10⁻³) = 2.5 × 10⁻³ m
  • Fringes 2.5 mm apart: easy to measure. A wavelength of 0.000 000 633 m becomes millimetres on the screen.
  • Turn it around: measure the fringe spacing, slit separation and distance, and calculate λ.
Quick check
?In a Young's double-slit experiment, monochromatic red light is incident normally on the slits and the fringe separation on the screen is 2.0 mm. Which single change would make the fringe separation 4.0 mm?
Mission check

?Laser light passes through two slits 0.25 mm apart onto a wall 2.50 m away. A student measures across six fringe spacings: the fringes span 39.0 mm. What is the wavelength of the light?
Mission 2

Mission 2: How do you measure the wavelength of light with two slits, and why did it take so long to be believed?

Make a guess: How do you measure the wavelength of light with two slits, and why did it take so long to be believed?

Mission 2

Setting up

Young's slits bench set-upSeen from above (not to scale)laserdouble slitslit separation0.1–0.5 mmscreentape measure: slits-to-screen distance,1–3 mThe fringes on the screen, face-on1st11th10 spacingsFringe spacing = distance ÷ 10. Countspacings, not fringes.No laser? Lamp, filter, single slitlampfiltersingleslitdoubleslitto screenThe single slit lights both slits from onepoint, so they are coherent.
  • Laser → double slit (slit separation about 0.1–0.5 mm) → screen 1–3 m away. Darkened room.
  • The laser is monochromatic and coherent: one wavelength, with both slits lit by the same wavefronts.
  • No laser? A filament lamp, a colour filter, then a single slit before the double slit. The single slit lights both slits from one point, so they are coherent.
  • Follow the laser safety rules.
Mission 2

Measuring well

  • Slit separation: from the manufacturer, or measured with a travelling microscope.
  • Slits-to-screen distance: metre rule or tape. Large, so its percentage uncertainty is small.
  • Fringe spacing: measure across many fringes (say 10 spacings) and divide. One spacing of about 2 mm would carry a huge percentage uncertainty.
  • Count spacings, not fringes: from the 1st to the 11th bright fringe is 10 spacings.
  • Better: repeat at several screen distances. Plot fringe spacing against distance: a straight line through the origin, gradient = λ ÷ slit separation.
Mission 2

Worked example

Measuring across ten fringe spacingsIllustrative drawing of the fringes1st11th23456789100510152023.5mm23.5 mm = 10 spacingsFringe spacing = 23.5 mm ÷ 10 = 2.35 mmEqually spaced bright fringes; drawn to theruler’s scale. Illustrative, not aphotograph.
  • Slit separation 0.50 mm. Screen 1.85 m away. From the 1st to the 11th bright fringe: 23.5 mm.
  • Fringe spacing = 23.5 ÷ 10 = 2.35 mm.
  • λ = aΔy/D = (0.50 × 10⁻³ × 2.35 × 10⁻³)/1.85
  • λ = 6.35 × 10⁻⁷ m ≈ 6.4 × 10⁻⁷ m (640 nm, red).
  • Ruler reading ±0.5 mm: 2% of 23.5 mm, but 21% of a single 2.35 mm spacing.
Quick check
?A student doubles the slits-to-screen distance and, at the same time, swaps the double slit for one with twice the slit separation. The laser is unchanged. What happens to the fringe spacing?
Mission 2

Particles or waves?

Particles or waves: a timelineNewton: particles“Corpuscles”. Predicts lightis faster in water.late 1600sHuygens: wavesPredicts light is slower inwater.late 1600sNewton’s theory preferred forabout a centuryHis reputation; sharp shadows;waves could not explainpolarisation.Young: two-slit fringesAbout 1801–1803. Dark fringes:light + light can givedarkness.1801–1803Fresnel: wave theoryMathematical theory of wavesand diffraction.1810sLight is slower in waterAs the wave theory predicted.1850Maxwell: EM wavesLight is an electromagneticwave.1860sPhotonsPhotoelectric effect bringsback particles.1900sDates approximate. Orange: particle theory;blue: wave theory; purple: photons.
  • Newton (late 1600s): light is a stream of particles ("corpuscles"). Explained reflection and refraction; predicted light travels faster in water.
  • Huygens (same period): light is a wave. Predicted light travels slower in water.
  • Newton's theory was preferred for about a century: his huge reputation; sharp shadows (light's tiny λ makes diffraction hard to see); and Huygens' waves could not explain polarisation.
  • Young (about 1801–1803): two-slit fringes. Dark fringes, where light from both slits arrives, mean light + light can give darkness. Waves can cancel; particles cannot.
  • Acceptance was slow. Fresnel's mathematical wave theory (1810s) and the measurement (1850) that light is slower in water settled it.
  • Later: Maxwell showed light is an EM wave (1860s); the photoelectric effect (1900s) brought back particles: photons. Understanding changes with evidence.
Quick check
?In 1818, Fresnel's wave theory predicted a surprise: a small bright spot at the very centre of the shadow of a round disc. Arago looked and found it. Why did this count against a particle theory?
Mission check

?A student measures from the centre of the 1st bright fringe to the centre of the 9th bright fringe with a ruler: 42.0 mm, with an uncertainty of ±0.5 mm. What is the fringe spacing, and what percentage uncertainty does this reading carry into the wavelength?
Mission 3

Mission 3: How can a slide ruled with thousands of fine lines measure the wavelength of light?

Make a guess: How can a slide ruled with thousands of fine lines measure the wavelength of light?

Mission 3

What a grating is

Diffraction grating and beamslasergratingscreenn = −2n = −1n = 0n = +1n = +2zoom:dSpots are not equally spaced: sin θ, not θ,is proportional to the order.
  • A diffraction grating: a plate with many equally spaced, parallel slits (lines).
  • Slit spacing d = 1 ÷ (lines per metre). 300 lines per mm → d = 1/300 mm = 3.33 × 10⁻⁶ m.
  • Each slit diffracts, so light from all the slits overlaps and interferes.
  • Bright beams leave only at certain angles: where light from every slit arrives in phase.
Mission 3

Deriving the grating equation

Deriving the grating equationnormal incidencenormalθθdextra path = d sin θ(path difference)parallel rays to a distant screenRight-angled triangle: hypotenuse d (betweenadjacent slits), side d sin θ opposite θ.
  • Light hits the grating at normal incidence (straight on).
  • Look at light leaving two adjacent slits at angle θ. Extra path for the lower slit: d sin θ.
  • In phase when this path difference is a whole number of wavelengths:
  • d sin θ = nλ, n = 0, 1, 2, … (the order).
  • If adjacent slits are in phase, all the slits are in phase.
  • n = 0: the zero order, straight through (θ = 0).
  • Highest order: sin θ cannot exceed 1, so n ≤ d/λ.
Mission 3

Worked example

  • 300 lines per mm, red laser λ = 633 nm.
  • d = 1 ÷ (300 × 10³) = 3.33 × 10⁻⁶ m.
  • First order: sin θ = λ/d = 633 × 10⁻⁹ ÷ 3.33 × 10⁻⁶ = 0.190 → θ = 10.9°.
  • Second order: sin θ = 2λ/d = 0.380 → θ = 22.3°.
  • Highest order: d/λ = 5.27 → n = 5 (at 71.7°). Total beams: 5 + 5 + 1 = 11.
  • No small-angle shortcut: angles are large. Use sin θ.
Quick check
?Light of wavelength 650 nm is incident normally on a diffraction grating that has 600 lines per millimetre. At what angle to the straight-through direction is the second-order maximum observed?
Quick check
?Predict first. Monochromatic light is incident normally first on a double slit and then on a diffraction grating whose adjacent slits have the same separation d as the double slit. Every slit is equally illuminated. Compared with the double-slit fringes, how do the grating's principal maxima appear?
Mission 3

Why use many slits?

Two slits compared with a gratingTwo slits, spacing dbroad fringesintensityλ/d2λ/dsin θGrating: 5 slits, same spacing dsame angles; much sharper and brighterintensityλ/d2λ/dsin θSame scales in both graphs. A real gratinghas thousands of slits: its maxima aresharper still.
  • Same d, same λ: grating maxima are at the same angles as double-slit fringes.
  • But with many slits, a tiny step away from those angles puts the slits out of step and they cancel.
  • So the maxima are very sharp and very bright, with darkness between. Angles can be measured precisely.
  • Smaller d (more lines per mm) → orders farther apart.
Quick check
?Predict first. White light is incident normally on a diffraction grating. Which describes the pattern seen on a screen?
Mission 3

White light and spectra

White-light spectra from a gratingzero order: white1st2nd3rdoverlapEach order: violet nearest the middle, redfarthest (sin θ ∝ λ).Overlap: 2nd-order red (2 × 700 = 1400 nm)lies beyond 3rd-order violet (3 × 400 = 1200nm).Hydrogen lamp, first order: a line spectrum656486434410wavelength (nm)Strip: position proportional to sin θ.
  • Zero order is white: every wavelength has θ = 0 there.
  • Each other order is a spectrum: violet (short λ) nearest the centre, red farthest, since sin θ ∝ λ.
  • Higher orders spread wider and can overlap: second-order red (2 × 700 = 1400 nm) lies beyond third-order violet (3 × 400 = 1200 nm).
  • A gas-discharge lamp gives a line spectrum: separate bright coloured lines in each order, one per wavelength.
  • Uses: measuring wavelengths, identifying elements from their spectral lines (in labs and in starlight), spectrometers.
Mission 3

Measuring λ with a laser

Measuring wavelength with a laser and gratinglasergratingscreen2xxn = 2n = 2θD: grating to screen(metre rule)!Never look into the beamor its reflections.tan θ = x/D → θ → λ = d sin θ / nTop view, not to scale.
  • Laser beam normal to the grating; screen a measured distance D away (≈ 1 m).
  • Measure the distance 2x between the two nth-order spots, either side of the centre. Halve it: x.
  • tan θ = x/D → θ → λ = d sin θ / n.
  • Use the highest order you can measure, and a large D: smaller percentage uncertainty.
  • Repeat for several orders and average (or plot sin θ against n: gradient λ/d).
  • Safety: never look into the beam or its reflections; keep reflective surfaces out of the beam path.
Mission check

?A laser beam is directed normally at a grating with 500 lines per mm. On a screen 1.00 m from the grating, the two second-order spots are 1.50 m apart. What is the wavelength of the laser light?
Mission 4

Mission 4: Why does a flute or a guitar string sound only certain notes, never the ones in between?

Make a guess: Why does a flute or a guitar string sound only certain notes, never the ones in between?

Mission 4

Two waves, opposite directions

Making a stationary wavewave moving rightwave moving leftsum (what you see)t = 0t = T/4t = T/2dashed lines: nodesSame frequency, wavelength and amplitude; thesum is found by adding displacements point bypoint.
  • Two waves with the same frequency, wavelength and amplitude travel in opposite directions and superpose.
  • Usually a wave and its own reflection from a fixed end or the end of a pipe.
  • Add the displacements at each point at t = 0, T/4, T/2: some points never move; others swing the most.
  • The pattern does not travel. No energy is carried along it.
  • This is a stationary (standing) wave.
Mission 4

Nodes and antinodes

Nodes and antinodesNNNNAAAin phaseantiphaseλ/4λ/2N = node, A = antinodeDashed: the envelope (extreme positions).Solid: the string at one instant; arrows showwhich way points are moving.
  • Node: zero amplitude at all times. Antinode: maximum amplitude.
  • Node to next node: λ/2. Node to next antinode: λ/4.
  • Amplitude varies with position: zero at nodes, largest at antinodes.
  • Between two neighbouring nodes, all points move in phase.
  • Points on opposite sides of a node are in antiphase (phase difference π rad).
Mission 4

Two kinds of wave compared

  • Energy: progressive carries it along; stationary does not (stored, swapping between kinetic and potential).
  • Amplitude: progressive, the same everywhere (no losses); stationary, varies from zero (node) to maximum (antinode).
  • Phase: progressive, changes steadily along the wave; stationary, in phase within a loop, antiphase across a node.
  • Wavelength: progressive, crest to crest; stationary, twice the node-to-node distance.
Quick check
?A string fixed at both ends vibrates in a standing wave. Its nodes are at x = 0, 0.40 m, 0.80 m and 1.20 m, measured from one end. Points P, Q and R on the string are at x = 0.10 m, 0.20 m and 0.70 m. Which statement about the oscillations of P, Q and R is correct?
Mission check

Diagram of a horizontal string held between two fixed supports, one at each end, with the distance between the supports L = 1.20 m
?The diagram shows the envelope of a standing wave on a string of length L = 1.20 m that is fixed at both ends. What is the wavelength of the waves on the string?
Mission 5

Mission 5: How can stationary waves measure a wave's speed without timing anything?

Make a guess: How can stationary waves measure a wave's speed without timing anything?

Mission 5

Resonance tube

Resonance tubeNAL₁NANAL₂First resonanceL₁ + e = λ/4Second resonanceL₂ + e = 3λ/4tuning forkL₂ − L₁= λ/2The antinode A sits a little above the open end(end correction e). Using L₂ − L₁ = λ/2 cancelse; then v = fλ.Drawn to scale for one wavelength; e = 0.6 ×tube radius.
  • A tube stands in water; the water surface closes the lower end. Hold a vibrating tuning fork of known f over the open top.
  • Raise the tube slowly from low down. At the first loud resonance, a stationary wave fits: node at the water, antinode near the top.
  • First resonance length L1 ≈ λ/4.
  • The antinode sits slightly above the top. Find the second resonance too: L2 − L1 = λ/2 exactly, so the top-end error cancels.
  • Then v = fλ.
Mission 5

Worked example

  • Tuning fork 512 Hz.
  • L1 = 16.2 cm, L2 = 49.6 cm. λ/2 = 49.6 − 16.2 = 33.4 cm → λ = 0.668 m.
  • v = 512 × 0.668 = 342 m s⁻¹.
  • Using L1 alone: 4 × 0.162 × 512 = 332 m s⁻¹, a little low, as the antinode lies above the tube.
  • Repeat with several forks; average, or plot L1 against 1/f (gradient v/4).
Quick check
?A tuning fork of frequency 384 Hz is held over a resonance tube. The first resonance occurs when the air column is 22.0 cm long. Ignoring any end correction, what is the speed of sound in the air?
Mission check

?A loudspeaker emitting a 1000 Hz note faces a hard wall. A microphone moved along the line between them detects positions of minimum loudness 0.17 m apart. What is the speed of sound?
Mission 6

Mission 6: How can light stay trapped inside a thin glass strand, even when the strand bends?

Make a guess: How can light stay trapped inside a thin glass strand, even when the strand bends?

Mission 6

Heading into a lower n

Towards the critical angleLess than the critical angleairglassrefractedweak reflectionAt the critical angleairglassrefracted ray alongthe boundary (90°)strongreflectioncritical angleMore than the critical angleairglassall reflectedno light leavesDrawn for glass (n = 1.50) to air. Ray widthsshow roughly how much light goes each way.
  • Light going from glass into air (larger n to smaller n) bends away from the normal.
  • Increase the angle of incidence: the refracted ray swings towards the surface.
  • At the critical angle, the refracted ray runs along the boundary (angle of refraction 90°).
  • Beyond the critical angle no light leaves: all of it reflects back. This is total internal reflection (TIR).
  • Below the critical angle there is also a partial reflection, growing stronger as the angle nears the critical angle.
  • TIR obeys the law of reflection.
Mission 6

The critical angle

  • Put θ2 = 90° (sin 90° = 1) into Snell's law.
  • n1 sin θC = n2 sin 90°, so n1 sin θC = n2 (θC = critical angle).
  • Glass (1.50) to air: 41.8°. Water (1.33) to air: 48.8°.
  • TIR needs both: light heading into a medium of lower n, and angle of incidence greater than the critical angle.
Quick check
?Light can cross a flat boundary between water (n = 1.33) and glass (n = 1.50) in either direction. Which statement about total internal reflection at this boundary is correct?
Mission 6

Worked example: will it reflect?

  • A ray in water (n = 1.33) meets the water surface. Critical angle: sin⁻¹(1/1.33) = 48.8°.
  • At 50.0° to the normal: 50.0° > 48.8°, so TIR. No light leaves.
  • At 45.0°: 45.0° < 48.8°, so it refracts out. 1.33 × sin 45.0° = 1.00 × sin θ2 → sin θ2 = 0.940 → θ2 = 70.1°.
  • Always compare the angle from the normal with the critical angle.
Quick check
?A glass block of refractive index 1.52 is under water of refractive index 1.33. A ray inside the glass meets the glass–water boundary at an angle of incidence of 55.0°. What happens to the ray?
Mission 6

Step-index optical fibre

Step-index optical fibreLong sectioncore (higher n)cladding (lower n)Total internal reflection at the core–cladding boundary: angle of incidencegreater than the critical angle.Cross-sectionn across the fibren₁n₂n₁ > n₂n₁n₂corestepWidths and the index step exaggerated; not toscale.
  • A thin glass core (higher n) inside a glass cladding (slightly lower n).
  • Light meets the core–cladding boundary at more than the critical angle, so it is totally internally reflected, again and again, along the core.
  • Step index: n drops suddenly at the core–cladding boundary.
  • Cladding: keeps TIR at a boundary that cannot be scratched or dirtied, and stops light crossing between fibres that touch (signal security).
  • The fibre can bend gently. A sharp bend makes the angle of incidence fall below the critical angle, and light leaks out.
Quick check
?An optical fibre has a core of refractive index 1.52 and a cladding of refractive index 1.46. What is the critical angle at the core–cladding boundary?
Mission 6

Pulse broadening: many paths

Pulse broadeningOne pulsepulse inpulse out: broadenedThe zig-zag path (orange) is longer than theaxial path (blue): its light arrives later.Two pulsessent apartarrive overlappingBroadened pulses overlap and merge.Illustrative shapes; power against time, noscale. Without absorption the area under apulse stays the same.
  • Data travel as short pulses of light.
  • In a wide core, light takes different paths: straight along the axis, or zig-zagging at steeper angles. Longer paths take longer.
  • So a short pulse arrives spread out in time: pulse broadening.
  • This is multimode dispersion.
  • Broadened pulses overlap and merge. This limits the data rate and the distance a signal can travel.
  • Fix: a very narrow core (a few μm instead of about 50 μm) allows only one path. This is a monomode fibre: much higher data rates over much longer distances.
Quick check
?Two multimode fibres of the same length have identical cores. Fibre P's cladding has a refractive index closer to the core's than fibre Q's, so P has the larger critical angle at the core–cladding boundary. Which fibre broadens pulses less, and why?
Mission check

?An optical fibre has a glass core of refractive index 1.50, surrounded by glass of refractive index 1.40. On a straight stretch, a ray meets the core's wall at 75° to the normal. Where the fibre bends, the same ray meets the wall at 66° to the normal. What happens at each point?
Recap

The big ideas

Mission 1

  • Two coherent slits → equally spaced bright and dark fringes; bright where path difference = nλ.
  • λ = aΔy/D.

Mission 2

  • Measure fringe spacing across many fringes; count spacings, not fringes. Large screen distance, small percentage uncertainty.
  • Young's dark fringes were classical evidence for waves; Newton's particle theory held on for a century, until more evidence (Fresnel, light slower in water) settled it.

Mission 3

  • Grating at normal incidence: d sin θ = nλ, d = 1/(lines per metre); n ≤ d/λ.
  • Many slits → same angles as a double slit, but much sharper, brighter maxima.

Mission 4

  • Stationary wave: two identical waves travelling opposite ways; nodes λ/2 apart; no energy carried along.

Mission 5

  • Resonance tube: first resonance at L ≈ λ/4; v = fλ.

Mission 6

  • TIR: light heading into lower n at more than the critical angle is all reflected.
  • n1 sin θC = n2.
  • Step-index fibre: TIR at the core–cladding boundary; the cladding protects the core and stops cross-talk.
  • Different path lengths broaden pulses (modal / multimode dispersion); a monomode fibre fixes it.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Light, Nuclei and Options (part 2) for Eduqas A-level Physics. 🎉

  1. Mission 1Two slits, a laser and a ruler: how can stripes on a wall measure a wavelength far thinner than a hair?
  2. Mission 2How do you measure the wavelength of light with two slits, and why did it take so long to be believed?
  3. Mission 3How can a slide ruled with thousands of fine lines measure the wavelength of light?
  4. Mission 4Why does a flute or a guitar string sound only certain notes, never the ones in between?
  5. Mission 5How can stationary waves measure a wave's speed without timing anything?
  6. Mission 6How can light stay trapped inside a thin glass strand, even when the strand bends?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to A-Level Physics · Eduqas