← A-Level Physics · CCEA · A-Level Physics revision
⭐ 0
CCEA A-level Physics (1210) · AS 2: Waves, Photons and Astronomy (part 3)
Mini-Lesson

Waves, Photons and Astronomy (part 3)

6 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1Two slits, a laser and a ruler: how can stripes on a wall measure a wavelength far thinner than a hair?
  2. Mission 2How do you measure the wavelength of light with two slits, and why did it take so long to be believed?
  3. Mission 3You can hear someone around a corner but not see them. What decides how much a wave spreads?
  4. Mission 4How can a slide ruled with thousands of fine lines measure the wavelength of light?
  5. Mission 5Why can a few minutes of weak ultraviolet damage skin cells' DNA when hours of bright red light can't?
  6. Mission 6Why does a neon sign glow in a few sharp shades instead of a full rainbow?
Mission 1

Mission 1: Two slits, a laser and a ruler: how can stripes on a wall measure a wavelength far thinner than a hair?

Make a guess: Two slits, a laser and a ruler: how can stripes on a wall measure a wavelength far thinner than a hair?

Quick check
?Predict first. Monochromatic light passes through two very narrow slits and falls on a distant screen, producing a pattern of bright and dark bands. Which explanation accounts for this pattern?
Mission 1

Young's double slit

Young's double-slit set-uplaserdouble slitscreenPTwo paths to P, a bright fringe: pathdifference λ (here n = 1).Bright fringe: path difference nλ. Dark: (n+ ½)λ. Middle fringe: bright (pathdifference 0).Not to scale: the screen is much moredistant than the slit separation (break inthe axis).
  • Monochromatic light (e.g. a laser) → two narrow slits, very close together → a screen far away.
  • Light diffracts (spreads out) from each slit. The two spreading waves overlap and interfere.
  • Both slits are lit by the same wavefronts, so they act as coherent sources.
  • Bright fringe: path difference nλ. Dark fringe: path difference (n + ½)λ.
  • Result: equally spaced bright and dark fringes, with a bright fringe in the centre.
Mission 1

The fringe-spacing equation

Double-slit geometrya = slitseparationd = slits-to-screen distancey = fringe separationNot to scale: d ≫ a.
  • Fringe spacing = λ × (slits-to-screen distance) ÷ (slit separation).
  • λ = ay/d: a = slit separation, y = fringe separation, d = slits-to-screen distance.
  • Valid when the screen is far away compared with the slit separation (small angles).
Mission 1

Worked example

  • Laser light of wavelength 633 nm. Slits 0.50 mm apart. Screen 2.00 m from the slits.
  • y = λd/a = (633 × 10⁻⁹ × 2.00)/(0.50 × 10⁻³) = 2.5 × 10⁻³ m
  • Fringes 2.5 mm apart: easy to measure. A wavelength of 0.000 000 633 m becomes millimetres on the screen.
  • Turn it around: measure the fringe spacing, slit separation and distance, and calculate λ.
Quick check
?In a Young's double-slit experiment, monochromatic red light is incident normally on the slits and the fringe separation on the screen is 2.0 mm. Which single change would make the fringe separation 4.0 mm?
Mission check

?Laser light passes through two slits 0.25 mm apart onto a wall 2.50 m away. A student measures across six fringe spacings: the fringes span 39.0 mm. What is the wavelength of the light?
Mission 2

Mission 2: How do you measure the wavelength of light with two slits, and why did it take so long to be believed?

Make a guess: How do you measure the wavelength of light with two slits, and why did it take so long to be believed?

Mission 2

Setting up

Young's slits bench set-upSeen from above (not to scale)laserdouble slitslit separation0.1–0.5 mmscreentape measure: slits-to-screen distance,1–3 mThe fringes on the screen, face-on1st11th10 spacingsFringe spacing = distance ÷ 10. Countspacings, not fringes.No laser? Lamp, filter, single slitlampfiltersingleslitdoubleslitto screenThe single slit lights both slits from onepoint, so they are coherent.
  • Laser → double slit (slit separation about 0.1–0.5 mm) → screen 1–3 m away. Darkened room.
  • The laser is monochromatic and coherent: one wavelength, with both slits lit by the same wavefronts.
  • No laser? A filament lamp, a colour filter, then a single slit before the double slit. The single slit lights both slits from one point, so they are coherent.
  • Follow the laser safety rules.
Mission 2

Measuring well

  • Slit separation: from the manufacturer, or measured with a travelling microscope.
  • Slits-to-screen distance: metre rule or tape. Large, so its percentage uncertainty is small.
  • Fringe spacing: measure across many fringes (say 10 spacings) and divide. One spacing of about 2 mm would carry a huge percentage uncertainty.
  • Count spacings, not fringes: from the 1st to the 11th bright fringe is 10 spacings.
  • Better: repeat at several screen distances. Plot fringe spacing against distance: a straight line through the origin, gradient = λ ÷ slit separation.
Mission 2

Worked example

Measuring across ten fringe spacingsIllustrative drawing of the fringes1st11th23456789100510152023.5mm23.5 mm = 10 spacingsFringe spacing = 23.5 mm ÷ 10 = 2.35 mmEqually spaced bright fringes; drawn to theruler’s scale. Illustrative, not aphotograph.
  • Slit separation 0.50 mm. Screen 1.85 m away. From the 1st to the 11th bright fringe: 23.5 mm.
  • Fringe spacing = 23.5 ÷ 10 = 2.35 mm.
  • λ = ay/d = (0.50 × 10⁻³ × 2.35 × 10⁻³)/1.85
  • λ = 6.35 × 10⁻⁷ m ≈ 6.4 × 10⁻⁷ m (640 nm, red).
  • Ruler reading ±0.5 mm: 2% of 23.5 mm, but 21% of a single 2.35 mm spacing.
Quick check
?A student doubles the slits-to-screen distance and, at the same time, swaps the double slit for one with twice the slit separation. The laser is unchanged. What happens to the fringe spacing?
Mission check

?A student measures from the centre of the 1st bright fringe to the centre of the 9th bright fringe with a ruler: 42.0 mm, with an uncertainty of ±0.5 mm. What is the fringe spacing, and what percentage uncertainty does this reading carry into the wavelength?
Mission 3

Mission 3: You can hear someone around a corner but not see them. What decides how much a wave spreads?

Make a guess: You can hear someone around a corner but not see them. What decides how much a wave spreads?

Quick check
?Predict first. A wavefront diagram shows straight water waves of wavelength 2.0 cm, with wavefronts parallel to a barrier, passing through a gap 6.0 cm wide in the barrier; beyond the gap the wavefronts are straight in the middle and curved only at the edges. The gap is narrowed to 0.40 cm. How do the wavefronts beyond the gap change?
Mission 3

Diffraction

Diffraction at gaps and obstaclesGap ≈ λ: strong spreadingλλGap ≈ 5λ: little spreadingSmall obstacle: waves close up behind itAt a doorway (seen from above)Sound: λ ≈ 0.3–3 mbends around the edgessharp shadowsharp shadowLight: λ ≈ 4–7 × 10⁻⁷ mgoes almost straight
  • Diffraction: a wave spreads out as it passes through a gap or around the edge of an obstacle.
  • Speed, frequency and wavelength are unchanged. Only the direction of travel spreads.
  • Spreading becomes significant when the gap is comparable with λ. The narrower the gap, the more it spreads.
  • Gap about λ or smaller: nearly semicircular wavefronts, spreading through almost 180°.
  • Gap much wider than λ: very little spreading; a sharp-edged "shadow".
  • Speech: λ ≈ 0.3–3 m, like doorways. Light: λ ≈ 4–7 × 10⁻⁷ m, far smaller than any doorway.
Mission 3

Huygens and wavefront diagrams

Secondary wavelets at a gapλλwavefrontrayshadowshadownew wavefrontray at 90°to wavefrontEach point on the wavefront is a source ofsecondary wavelets.Wavelet after one period: radius λ.New wavefront: the line touching all thewavelets.
  • Huygens' construction: every point on a wavefront acts as a source of secondary wavelets. The new wavefront is the line touching all the wavelets.
  • At a gap, only part of the wavefront gets through. Wavelets from its edges spread into the "shadow".
  • Wavefront diagram: rays at 90° to wavefronts. Wavefront spacing (λ) stays the same beyond the gap.
  • Wide gap: straight in the middle, curved at the edges. Narrow gap: nearly semicircular.
Quick check
?Predict first. Monochromatic light of wavelength 600 nm is incident normally on a single slit, and the diffraction pattern is viewed on a distant screen. The slit width is then reduced from 0.20 mm to 0.10 mm. How does the central maximum change?
Mission 3

Light through one slit

Single-slit diffraction patternlasersingle slitscreenPattern on the screenintensityposition on screen4.7%1.6%side peaks, as % ofthe central peaksidecentral maximumtwice as wide as each side maximumNarrower slitwider, dimmer central maximum (dashed: firstslit)intensityposition on screenGraphs to scale; bands drawn brighter thantrue so the faint ones show.
  • Laser light through one narrow slit gives bright and dark bands, not a slit-shaped patch.
  • Central maximum: brightest, and twice as wide as each side maximum.
  • Side maxima: much dimmer, fainter the more distant they are from the centre.
  • Narrower slit → wider central maximum (and dimmer: less light gets through).
  • Longer λ (red rather than blue) → wider central maximum.
Mission check

?Sea waves reach a harbour wall with a 20 m wide entrance. A boat is moored behind the wall, well to one side of the entrance. On day 1 the waves have a wavelength of 20 m; on day 2, 2.0 m, with the same amplitude. On which day is the boat rocked more, and why?
Mission 4

Mission 4: How can a slide ruled with thousands of fine lines measure the wavelength of light?

Make a guess: How can a slide ruled with thousands of fine lines measure the wavelength of light?

Mission 4

What a grating is

Diffraction grating and beamslasergratingscreenn = −2n = −1n = 0n = +1n = +2zoom:dSpots are not equally spaced: sin θ, not θ,is proportional to the order.
  • A diffraction grating: a plate with many equally spaced, parallel slits (lines).
  • Slit spacing d = 1 ÷ (lines per metre). 300 lines per mm → d = 1/300 mm = 3.33 × 10⁻⁶ m.
  • Each slit diffracts, so light from all the slits overlaps and interferes.
  • Bright beams leave only at certain angles: where light from every slit arrives in phase.
Mission 4

Deriving the grating equation

Deriving the grating equationnormal incidencenormalθθdextra path = d sin θ(path difference)parallel rays to a distant screenRight-angled triangle: hypotenuse d (betweenadjacent slits), side d sin θ opposite θ.
  • Light hits the grating at normal incidence (straight on).
  • Look at light leaving two adjacent slits at angle θ. Extra path for the lower slit: d sin θ.
  • In phase when this path difference is a whole number of wavelengths:
  • d sin θ = nλ, n = 0, 1, 2, … (the order).
  • If adjacent slits are in phase, all the slits are in phase.
  • n = 0: the zero order, straight through (θ = 0).
  • Highest order: sin θ cannot exceed 1, so n ≤ d/λ.
Mission 4

Worked example

  • 300 lines per mm, red laser λ = 633 nm.
  • d = 1 ÷ (300 × 10³) = 3.33 × 10⁻⁶ m.
  • First order: sin θ = λ/d = 633 × 10⁻⁹ ÷ 3.33 × 10⁻⁶ = 0.190 → θ = 10.9°.
  • Second order: sin θ = 2λ/d = 0.380 → θ = 22.3°.
  • Highest order: d/λ = 5.27 → n = 5 (at 71.7°). Total beams: 5 + 5 + 1 = 11.
  • No small-angle shortcut: angles are large. Use sin θ.
Quick check
?Light of wavelength 650 nm is incident normally on a diffraction grating that has 600 lines per millimetre. At what angle to the straight-through direction is the second-order maximum observed?
Quick check
?Predict first. Monochromatic light is incident normally first on a double slit and then on a diffraction grating whose adjacent slits have the same separation d as the double slit. Every slit is equally illuminated. Compared with the double-slit fringes, how do the grating's principal maxima appear?
Mission 4

Why use many slits?

Two slits compared with a gratingTwo slits, spacing dbroad fringesintensityλ/d2λ/dsin θGrating: 5 slits, same spacing dsame angles; much sharper and brighterintensityλ/d2λ/dsin θSame scales in both graphs. A real gratinghas thousands of slits: its maxima aresharper still.
  • Same d, same λ: grating maxima are at the same angles as double-slit fringes.
  • But with many slits, a tiny step away from those angles puts the slits out of step and they cancel.
  • So the maxima are very sharp and very bright, with darkness between. Angles can be measured precisely.
  • Smaller d (more lines per mm) → orders farther apart.
Quick check
?Predict first. White light is incident normally on a diffraction grating. Which describes the pattern seen on a screen?
Mission 4

White light and spectra

White-light spectra from a gratingzero order: white1st2nd3rdoverlapEach order: violet nearest the middle, redfarthest (sin θ ∝ λ).Overlap: 2nd-order red (2 × 700 = 1400 nm)lies beyond 3rd-order violet (3 × 400 = 1200nm).Strip: position proportional to sin θ.
  • Zero order is white: every wavelength has θ = 0 there.
  • Each other order is a spectrum: violet (short λ) nearest the centre, red farthest, since sin θ ∝ λ.
  • Higher orders spread wider and can overlap: second-order red (2 × 700 = 1400 nm) lies beyond third-order violet (3 × 400 = 1200 nm).
Mission 4

Measuring λ with a laser

Measuring wavelength with a laser and gratinglasergratingscreen2xxn = 2n = 2θD: grating to screen(metre rule)!Never look into the beamor its reflections.tan θ = x/D → θ → λ = d sin θ / nTop view, not to scale.
  • Laser beam normal to the grating; screen a measured distance D away (≈ 1 m).
  • Measure the distance 2x between the two nth-order spots, either side of the centre. Halve it: x.
  • tan θ = x/D → θ → λ = d sin θ / n.
  • Use the highest order you can measure, and a large D: smaller percentage uncertainty.
  • Safety: never look into the beam or its reflections; keep reflective surfaces out of the beam path.
Mission check

?A laser beam is directed normally at a grating with 500 lines per mm. On a screen 1.00 m from the grating, the two second-order spots are 1.50 m apart. What is the wavelength of the laser light?
Mission 5

Mission 5: Why can a few minutes of weak ultraviolet damage skin cells' DNA when hours of bright red light can't?

Make a guess: Why can a few minutes of weak ultraviolet damage skin cells' DNA when hours of bright red light can't?

Mission 5

Light comes in packets: photons

Photon energy and wavelengthSpectrum (wavelength in nm)UV700600500400300shorter wavelength, higher frequency →red, 700 nm1.8 eVviolet, 400 nm3.1 eVUV, 300 nm4.1 eVOne photon of each: shorter wavelength =more energy per photonOne wavelength, dim and brightdimbrightBrighter: more photons, each with the sameenergy.
  • Electromagnetic radiation is emitted and absorbed in discrete packets of energy: photons.
  • A photon is a quantum of electromagnetic energy.
  • Energy of one photon: E = hf = hc/λ.
  • h = Planck constant = 6.63 × 10⁻³⁴ J s.
  • Higher frequency (shorter wavelength) → more energy per photon.
  • A brighter beam of the same colour has more photons, not bigger ones.
Mission 5

The electronvolt

  • Photon energies in joules are tiny. Use the electronvolt.
  • 1 eV: the energy gained by an electron accelerated through a potential difference of 1 V.
  • 1 eV = 1.60 × 10⁻¹⁹ J. J → eV: divide by 1.60 × 10⁻¹⁹.
  • Example, blue light, λ = 450 nm:
    • E = hc/λ = (6.63 × 10⁻³⁴ × 3.00 × 10⁸)/(450 × 10⁻⁹) = 4.42 × 10⁻¹⁹ J
    • = 4.42 × 10⁻¹⁹/1.60 × 10⁻¹⁹ = 2.76 eV.
Quick check
?Light with a wavelength of 500 nm in air passes from the air into water (n = 1.33). What is the energy of each photon while it travels through the water? Use h = 6.63 × 10⁻³⁴ J s and c = 3.00 × 10⁸ m s⁻¹, and treat the speed of light in air as c.
Quick check
?Predict first. Which observation from photoelectric experiments cannot be explained by the classical wave theory of light?
Mission 5

The photoelectric effect

Photoelectric effect observationsClean metal plate in a vacuum; f₀ =threshold frequencybelow f₀, brightno electronsabove f₀, dima few, at onceabove f₀, brightmore, same max speedhigher ffaster electronsElectron arrows show the maximum speed:equal for dim and bright light of the samefrequency.

Shine electromagnetic radiation on a clean metal surface. Electrons may be emitted: photoelectrons.

  • Below a threshold frequency f0: no emission, however intense the light.
  • Above f0: emission immediately, even in very dim light.
  • Maximum kinetic energy of the electrons rises with frequency; it does not depend on intensity.
  • Number emitted per second is proportional to intensity (above f0).
  • f0 depends on the metal (e.g. zinc needs ultraviolet).
Mission 5

Einstein's explanation

Photon energy, work function and kinetic energymetaljust free of the metalsurface electrondeeperneedsmore than φhfphotonφwork function:the minimummaximumkinetic energyOne photon gives all its energy to oneelectron.A deeper electron needs more than φ to getout, so it leaves with less: the kineticenergy above is a maximum.hf < φ: no electron escapes. Threshold: hf₀= φ.
  • One photon gives all its energy to one electron: a one-to-one interaction.
  • Work function φ: the minimum energy needed to remove an electron from the metal's surface.
  • If hf < φ: no electron can escape. Threshold: hf0 = φ.
  • If hf is bigger than the work function, the extra energy becomes kinetic energy. Electrons from just below the surface lose some on the way out, so this is a maximum.
  • ½mv²max = hf − hf0
Mission 5

Why waves can't explain it

Wave theory: energy arrives spread over the wavefront and builds up with intensity and time. It predicts:

  • Any frequency should work, given bright enough light. ✗ Observed: a sharp threshold f0.
  • Dim light should cause a delay while energy builds up. ✗ Observed: instant emission.
  • Brighter light should give faster electrons. ✗ Observed: the maximum kinetic energy is set by f alone.
  • Photon model explains all three: energy comes in lumps of hf, one lump per electron.
  • So the photoelectric effect is evidence for the particle (photon) nature of light.
Mission 5

Worked example

Light of wavelength 400 nm falls on potassium, work function 2.30 eV.

  • Photon energy: hf = hc/λ = (6.63 × 10⁻³⁴ × 3.00 × 10⁸)/(400 × 10⁻⁹) = 4.97 × 10⁻¹⁹ J = 3.11 eV.
  • Maximum kinetic energy = 3.11 − 2.30 = 0.81 eV = 1.29 × 10⁻¹⁹ J.
  • Threshold frequency: f0 = (work function)/h = (2.30 × 1.60 × 10⁻¹⁹)/(6.63 × 10⁻³⁴) = 5.55 × 10¹⁴ Hz.
  • Fastest electrons: ½mv²max = 1.29 × 10⁻¹⁹ J → vmax = √(2 × 1.29 × 10⁻¹⁹/9.11 × 10⁻³¹) = 5.33 × 10⁵ m s⁻¹.
Quick check
?Light whose photons each have energy 4.0 eV shines on three metals: X, with work function 2.0 eV; Y, with work function 3.0 eV; and Z, with work function 4.5 eV. Which statement about the maximum kinetic energy of the electrons emitted from each metal is correct?
Mission check

?Ultraviolet light above the threshold frequency shines on a metal plate and electrons are emitted. The ultraviolet is replaced by ultraviolet of a shorter wavelength, with the same intensity (the same power per square metre). What happens?
Mission 6

Mission 6: Why does a neon sign glow in a few sharp shades instead of a full rainbow?

Make a guess: Why does a neon sign glow in a few sharp shades instead of a full rainbow?

Mission 6

Energy levels

Hydrogen energy levelsenergy (eV)−13.6n = 1−3.40n = 2−1.51n = 3−0.85n = 40n = ∞electron freeground stateexcited states13.6 eV freesthe electronTo scale. The gaps shrink going up; thelevels crowd together near 0.
  • An electron bound in an atom can have only certain energies: energy levels.
  • Lowest level: the ground state (n = 1). Higher levels: excited states.
  • Zero energy = electron just free of the atom (ionised).
  • So every bound level is negative: energy must be supplied to free the electron.
  • Hydrogen: −13.6 eV, −3.40 eV, −1.51 eV, −0.85 eV, … crowding towards 0.
  • 1 eV = 1.60 × 10⁻¹⁹ J. Levels may be given in eV or J.
Mission 6

Emitting a photon

  • An electron drops from a higher level to a lower one. The atom emits one photon.
  • Photon energy = energy lost: hf = ΔE.
  • With c = fλ: λ = hc/ΔE.
  • Bigger drop → higher frequency → shorter wavelength.
  • Each transition gives one frequency: one spectral line.
Mission 6

Worked example

  • Hydrogen: n = 2 (−3.40 eV) → n = 1 (−13.6 eV).
  • ΔE = −3.40 − (−13.6) = 10.2 eV.
  • In joules: 10.2 × 1.60 × 10⁻¹⁹ = 1.63 × 10⁻¹⁸ J.
  • f = ΔE/h = 1.632 × 10⁻¹⁸ ÷ 6.63 × 10⁻³⁴ = 2.46 × 10¹⁵ Hz.
  • λ = c/f = 1.22 × 10⁻⁷ m (122 nm, ultraviolet).
  • Always use the difference between levels, never one level's value.
Quick check
?A hypothetical atom has only four energy levels below its ionisation energy: −8.00 eV, −5.00 eV, −3.50 eV and −1.00 eV. In a hot gas of these atoms, collisions put atoms into all four levels, and none of the atoms is ionised. What is the longest wavelength of the photons that the gas emits in transitions among these levels? Take h = 6.63 × 10⁻³⁴ J s, c = 3.00 × 10⁸ m s⁻¹ and 1 eV = 1.60 × 10⁻¹⁹ J.
Mission 6

How many lines?

Emission lines from three levelsn = 1n = 2n = 3largest drop:shortest λNot to scale.Emission: arrows point down only. Each dropgives one photon (wavy arrow), hf = ΔE. 3levels → 3 lines.
  • An excited electron can drop straight down or in steps.
  • Every pair of levels gives one possible line.
  • 3 levels → 3 lines: 3→2, 3→1, 2→1.
  • Different gaps → different wavelengths. The largest gap gives the shortest wavelength.
Quick check
?An atom has only four energy levels: −1.50 eV, −2.50 eV, −4.00 eV and −6.00 eV. What is the energy of the emitted photon that has the SHORTEST wavelength?
Mission 6

Absorbing a photon; ionisation

Absorbing a photonMatches a gaphf = gapabsorbed:electron movesupMatches no gaphf ≠ any gappassesstraightthroughEnough to freeitKEionisationenergy ormore: electronfreed, extra →kinetic energy0The atom starts in the ground state; anupward arrow always starts at the occupiedlevel. Ionisation energy = 0 − E₁ (hydrogen:13.6 eV).
  • A photon is absorbed only if its energy exactly equals a gap from the electron's level. All or nothing.
  • Any other photon passes straight through.
  • Ionisation energy: energy to free the electron from the ground state = 0 − E1. Hydrogen: 13.6 eV (2.18 × 10⁻¹⁸ J).
  • Any photon with at least this energy can ionise; the extra becomes kinetic energy of the freed electron.
  • From an excited level, less is needed: the ground state needs the most.
Mission 6

Three kinds of spectrum

Continuous, emission and absorption spectraContinuoushot, dense source: all wavelengthsEmission lines (hydrogen)hot gas at low pressure: bright lines on darkAbsorption lines (hydrogen)white light through cooler gas: dark lines400500600700wavelength (nm)The dark lines sit at exactly the samewavelengths as the bright emission lines.
  • Continuous: all wavelengths. Hot, dense source: a lamp filament, a star's surface.
  • Emission line: bright lines on a dark background. Hot gas at low pressure.
  • Absorption line: a continuous spectrum crossed by dark lines. White light through a cooler gas.
  • The dark lines sit at the same wavelengths as that gas's emission lines.
  • They look dark because the absorbed energy is re-emitted in all directions, so little continues forward.
Quick check
?Predict first. Two discharge tubes, P and Q, each contain a single gas. The emission spectrum of each gas shows exactly four bright lines in the visible region, but none of the wavelengths of the lines from P matches any of the wavelengths of the lines from Q. A student claims that P and Q contain the same element. Which statement is correct?
Mission 6

Evidence and fingerprints

  • Sharp lines, not a smear: atoms change energy only by fixed amounts. Evidence for discrete levels.
  • Each element has its own set of levels, so its own set of lines.
  • Match the lines with laboratory spectra → identify the element.
  • Works in a lamp, a gas cloud or a star's outer layers.
  • Helium was discovered in 1868 from a yellow line in the Sun's spectrum that matched no known element.
Mission check

?An atom has energy levels at −10.0 eV (the ground state), −5.0 eV and −3.0 eV. An atom in its ground state is struck by a photon of energy 3.0 eV. What happens?
Recap

The big ideas

Mission 1

  • Two coherent slits → equally spaced bright and dark fringes; bright where path difference = nλ.
  • λ = ay/d (d = slits-to-screen distance).

Mission 2

  • Measure fringe spacing across many fringes; count spacings, not fringes. Large screen distance, small percentage uncertainty.

Mission 3

  • Diffraction is significant when the gap or obstacle is comparable with λ, and greater the narrower the gap; λ itself does not change.
  • Single slit: wide, bright central maximum; narrower slit or longer λ → wider pattern.

Mission 4

  • Grating at normal incidence: d sin θ = nλ, d = 1/(lines per metre); n ≤ d/λ.
  • Many slits → same angles as a double slit, but much sharper, brighter maxima.

Mission 5

  • Photon energy E = hf = hc/λ; 1 eV = 1.60 × 10⁻¹⁹ J. Intensity sets the number of photons, frequency the energy of each.
  • One photon frees at most one electron; threshold hf0 = φ; maximum kinetic energy = hf − φ, independent of intensity. Evidence for photons.

Mission 6

  • Levels are negative (0 = ionised). A transition emits or absorbs one photon: hf = ΔE, λ = hc/ΔE.
  • Line spectra are evidence of discrete levels, and each element's lines identify it, in a lamp or a star.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Waves, Photons and Astronomy (part 3) for CCEA A-level Physics. 🎉

  1. Mission 1Two slits, a laser and a ruler: how can stripes on a wall measure a wavelength far thinner than a hair?
  2. Mission 2How do you measure the wavelength of light with two slits, and why did it take so long to be believed?
  3. Mission 3You can hear someone around a corner but not see them. What decides how much a wave spreads?
  4. Mission 4How can a slide ruled with thousands of fine lines measure the wavelength of light?
  5. Mission 5Why can a few minutes of weak ultraviolet damage skin cells' DNA when hours of bright red light can't?
  6. Mission 6Why does a neon sign glow in a few sharp shades instead of a full rainbow?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to A-Level Physics · CCEA