← A-Level Physics · CCEA · A-Level Physics revision
⭐ 0
CCEA A-level Physics (1210) · A2 1: Thermal physics, circular motion and SHM
Mini-Lesson

Thermal physics, circular motion and SHM

7 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1Molecules hit the walls at random. How can that add up to a pressure you can calculate exactly?
  2. Mission 2Under the same Sun, beach sand gets scorching while the sea stays cool. Why?
  3. Mission 3How do you measure the energy a material needs, when some always leaks away?
  4. Mission 4A car rounds a bend at a steady speed. Is it accelerating, and if so, how much?
  5. Mission 5Whirl a ball on a string in a circle. Is anything pulling it outwards?
  6. Mission 6Why does an oscillating mass on a spring move fastest at the one point where no overall force acts on it?
  7. Mission 7Two identical oscillators start a moment apart. What single number says how far out of step they are?
Mission 1

Mission 1: Molecules hit the walls at random. How can that add up to a pressure you can calculate exactly?

Make a guess: Molecules hit the walls at random. How can that add up to a pressure you can calculate exactly?

Mission 1

Using the kinetic theory equation

  • pV = ⅓Nm⟨c²⟩
  • Nm is the total mass of gas, so Nm/V = ρ and p = ⅓ρ × (mean square speed).
  • Air: p = 1.0 × 10⁵ Pa, ρ = 1.2 kg m⁻³.
  • Mean square speed = 3p/ρ = 2.5 × 10⁵ m² s⁻². rms speed = 500 m s⁻¹.
Quick check
?Nitrogen in a cylinder has a density of 3.40 kg m⁻³. The root-mean-square speed of its molecules is 517 m s⁻¹. Treat it as an ideal gas. What is its pressure?
Quick check
?An ideal gas is heated from 27 °C to 927 °C. By what factor does the rms speed of its molecules increase?
Mission check

?Two sealed containers of equal volume are at the same temperature. Each holds the same number N of molecules of an ideal gas. Each molecule of gas Y has 4 times the mass of a molecule of gas X. What is (pressure of Y)/(pressure of X)?
Mission 2

Mission 2: Under the same Sun, beach sand gets scorching while the sea stays cool. Why?

Make a guess: Under the same Sun, beach sand gets scorching while the sea stays cool. Why?

Mission 2

Specific heat capacity

Sand and sea in the Sun1 kg of sand1 kg of watersame energy to eachbig risesmall risec ≈ 800c ≈ 4200c: specific heat capacity in J kg⁻¹ K⁻¹(approximate values). Sand warms about 5times as much.
  • Specific heat capacity, c: energy needed to raise the temperature of 1 kg by 1 K. Unit: J kg⁻¹ K⁻¹.
  • Q = mcΔθ
  • Water: c ≈ 4200 J kg⁻¹ K⁻¹. Dry sand: about 800. Same energy per kg → water warms about one fifth as much.
  • A change of 1 °C is a change of 1 K: Δθ needs no conversion.
Mission 2

Worked example

  • 0.500 kg aluminium block, 20 °C → 45 °C. c = 900 J kg⁻¹ K⁻¹.
  • Temperature rise: 45 − 20 = 25 K.
  • Energy: 0.500 × 900 × 25 = 1.1 × 10⁴ J (11 250 J).
  • With a 50 W heater and no losses: t = 11 250 ÷ 50 = 225 s.
Quick check
?An electric kettle heats 250 g of water from 18 °C to 90 °C. The specific heat capacity of water is 4.18 × 10³ J kg⁻¹ K⁻¹. How much energy is transferred to the water? Ignore energy transferred to the kettle and surroundings.
Mission check

?0.20 kg of water and 0.20 kg of cooking oil, both at 20 °C, are each supplied with 12 kJ of energy. Specific heat capacities: water 4180 J kg⁻¹ K⁻¹, oil 2000 J kg⁻¹ K⁻¹. Assume no energy is lost. Which statement about their final temperatures is correct?
Mission 3

Mission 3: How do you measure the energy a material needs, when some always leaks away?

Make a guess: How do you measure the energy a material needs, when some always leaks away?

Mission 3

Electrical method for c

Electrical method for specific heat capacityVApower supplyheaterthermometeraluminium blockinsulationθ / °Ct / sΔtΔθlaggradient = Δθ/Δt of the straight partc = VI ÷ (m × gradient)
  • Metal block (known mass), wrapped in insulation. Holes for an immersion heater and a thermometer (a drop of oil helps contact).
  • Heater circuit: ammeter in series, voltmeter across the heater. Or a joulemeter.
  • Energy supplied: E = VIt.
  • Record temperature every 30 s. Plot θ against t.
  • Use the gradient of the straight part: c = VI ÷ (m × gradient). This avoids the early lag while the heater warms up.
Mission 3

Worked example

  • 1.00 kg aluminium block. Heater: 12.0 V, 4.00 A → P = 48.0 W.
  • Gradient of θ–t graph: 0.0500 K s⁻¹.
  • c = 48.0 ÷ (1.00 × 0.0500) = 960 J kg⁻¹ K⁻¹.
  • Data-book value ≈ 900. Measured value is too high: some energy went to the surroundings, so less raised the block's temperature.
Quick check
?A 0.80 kg copper block is heated by a 24 W electrical heater. On the straight part of its temperature–time graph, the temperature rises at 0.075 K s⁻¹. What is the specific heat capacity of copper from these data?
Mission check

?A student uses the electrical method to find the specific heat capacity of a brass block. Her value is 10% higher than the data-book value. Which change to her method would most reduce this difference?
Mission 4

Mission 4: A car rounds a bend at a steady speed. Is it accelerating, and if so, how much?

Make a guess: A car rounds a bend at a steady speed. Is it accelerating, and if so, how much?

Mission 4

The radian

The radianrr1 radarc = r1 rad ≈ 57.3°θ = s/r
  • Angle in radians: θ = arc length ÷ radius = s/r.
  • 1 radian: the angle at the centre when the arc length equals the radius.
  • Full circle: s = 2πr, so 2π rad = 360°. 1 rad ≈ 57.3°.
  • Convert: degrees × π/180 → radians.
Mission 4

Period, frequency, speed

  • Period T: time for one full revolution (s).
  • Frequency f: revolutions per second (Hz). f = 1/T.
  • One revolution = one circumference, 2πr. Constant speed: v = 2πr/T.
Mission 4

Angular velocity

Same angle, same angular velocityr2rsame angle, same ωouter point: longerarc, larger v
  • Angular velocity ω: angle swept per second, in rad s⁻¹.
  • One revolution sweeps 2π rad in time T: ω = 2π/T = 2πf.
  • v = ωr.
  • Every point on a rigid turning object has the same ω. Points further out have larger v.
Quick check
?A bicycle wheel of diameter 0.700 m rotates at a steady rate about a fixed axle, making one complete revolution every 0.250 s. What is the linear speed of a point on the rim of the wheel?
Mission 4

Steady speed, changing velocity

Velocity changes on a bendv₁v₂Δvv₂−v₁Δvv₁ and v₂ have equal length. Δv = v₂ − v₁.
  • Velocity is a vector. Going around a circle, its direction keeps changing.
  • Changing velocity = acceleration, even at constant speed.
  • Draw v1 and v2 at two nearby points. The change, Δv = v2 − v1, points towards the centre.
  • So the acceleration points to the centre: centripetal acceleration.
  • It needs a resultant force towards the centre.
Mission 4

Centripetal acceleration

  • a = v²/r = ω²r, towards the centre.
  • Example: a child on a spinning playground ride, 1.5 m from the centre, one revolution every 4.0 s.
  • v = 2πr/T = 2π × 1.5 ÷ 4.0 = 2.4 m s⁻¹.
  • ω = 2π/T = 2π ÷ 4.0 = 1.6 rad s⁻¹.
  • a = v²/r = 2.36² ÷ 1.5 = 3.7 m s⁻², towards the centre.
  • Check: ω²r = 1.57² × 1.5 = 3.7 m s⁻².
Quick check
?Car X rounds a curve of radius 50 m and car Y rounds a curve of radius 100 m. Both cars move at the same constant speed. How does the magnitude of car X's centripetal acceleration compare with that of car Y?
Mission 4

Recap: three ways to write it

  • Given v and r: a = v²/r.
  • Given ω (or f) and r: a = ω²r, with ω = 2πf.
  • Given T and r: ω = 2π/T, so a = 4π²r/T².
  • Always use the radius, not the diameter. ω in rad s⁻¹, not degrees per second.
Mission check

?The drum of a washing machine has a diameter of 0.50 m. It rotates about a horizontal axis at constant speed, with a time period of 0.050 s. What is the centripetal acceleration of a sock pressed against the inside of the drum?
Mission 5

Mission 5: Whirl a ball on a string in a circle. Is anything pulling it outwards?

Make a guess: Whirl a ball on a string in a circle. Is anything pulling it outwards?

Mission 5

Centripetal force is the resultant

The resultant force points inwardsvelocitytensionTop viewball on a stringThe only horizontal force: tension, at 90° tothe velocity.
  • Circular motion at constant speed: acceleration v²/r towards the centre.
  • Newton's second law: it needs a resultant force towards the centre: the centripetal force.
  • F = mv²/r = mω²r, towards the centre.
  • It is perpendicular to the velocity: it changes the direction, not the speed.
  • It is not an extra force. It is the resultant of real forces: tension, friction, gravity, normal force.
Mission 5

No outward force

When the string breaksstring breaks✓ along the tangent✗ along the radiusStraight line along the tangent (first law): nooutward force acts.
  • Nothing pulls the ball outwards. The string pulls it inwards.
  • Cut the string: the ball flies off along the tangent, in a straight line (first law). Not outwards along the radius.
  • The "flung outwards" feeling in a turning car: your body keeps going straight while the car turns under you.
  • On a free-body diagram, never draw a "centripetal force" arrow or a "centrifugal force" arrow. Draw only real forces.
Quick check
?A cyclist rides around a flat circular track at a constant speed of 8.0 m s⁻¹. Which statement about her motion is correct?
Quick check
?A car travels at constant speed around a bend on a flat horizontal road; its path is part of a horizontal circle. Air resistance is negligible. Which statement about the horizontal forces on the car is correct?
Mission 5

Worked example: a car on a flat bend

A car on a flat bendweightnormalforcefriction, at the roadRear view← inside of the bendfrictionTop viewFriction = mv²/r = 1200 × 15² ÷ 50 = 5400 NIt is the only sideways force.
  • A 1200 kg car rounds a flat bend of radius 50 m at 15 m s⁻¹.
  • Only friction from the road acts sideways, so friction is the centripetal force.
  • F = mv²/r = 1200 × 15² ÷ 50 = 5400 N, towards the centre.
  • If the greatest friction the tyres can give is 7000 N: vmax = √(Fr/m) = √(7000 × 50 ÷ 1200) = 17 m s⁻¹.
  • Faster than that: friction cannot supply mv²/r, and the car skids towards the outside of the bend.
Mission check

?A car drives at constant speed over the top of a rounded hill in the road. Near the top, the road's vertical cross-section is a circular arc. The car stays in contact with the road. At the top, how does the normal force from the road compare with the car's weight?
Mission 6

Mission 6: Why does an oscillating mass on a spring move fastest at the one point where no overall force acts on it?

Make a guess: Why does an oscillating mass on a spring move fastest at the one point where no overall force acts on it?

Mission 6

What makes motion simple harmonic

Restoring forceequilibrium−A0force zero+A/2+Arestoring force: towards equilibrium,∝ displacementweightBouncing ball (elastic):periodic, not SHMforce (weight) constant,not ∝ displacementForce arrows to scale (proportional todisplacement).
  • Periodic motion: repeats in equal time intervals. SHM is a special case. Every SHM is periodic; not every periodic motion is SHM.
  • Equilibrium position: where the object would rest; the restoring force is zero there.
  • Restoring force: always points back towards equilibrium, opposite to the displacement.
  • SHM: the restoring force is proportional to the displacement from equilibrium.
  • Condition: a ∝ −x
Mission 6

Describing an oscillation

  • Displacement x: distance from equilibrium, with a sign (+ one side, − the other).
  • Amplitude A: maximum displacement.
  • Period T: time for one complete cycle. Frequency f: cycles per second (Hz). T = 1/f.
  • Angular frequency ω = 2π/T = 2πf, in rad s⁻¹. One cycle = 2π rad.
Quick check
?Each object below is displaced and released, and then moves back and forth. Which one moves with simple harmonic motion?
Mission 6

The defining equation

Acceleration against displacementxa−A+A+ω²A−ω²Agradient = −ω²
  • a = −ω²x
  • The minus sign: acceleration always points opposite to the displacement, towards equilibrium.
  • It does not mean "slowing down": moving towards equilibrium, the object speeds up.
  • a against x: a straight line through the origin with a negative gradient.
  • Gradient of the a–x graph = −ω².
Mission 6

Worked example

  • f = 2.5 Hz → ω = 2π × 2.5 = 15.7 rad s⁻¹.
  • At x = +0.030 m: a = −ω²x = −(15.7)² × 0.030 = −7.4 m s⁻² (towards equilibrium).
  • At x = 0: a = 0.
Mission 6

x, v and a against time

x, v and a against time0T/4T/2Tx+A−Avatx = 0at −AAt ±A: v = 0, |a| max.At x = 0: |v| max, a = 0.Shapes only: each graph has its own verticalscale.
  • Released from rest at x = +A at t = 0: x–t is a cosine curve.
  • v = gradient of x–t. v–t is a negative sine curve, a quarter cycle ahead of x.
  • a = gradient of v–t. a–t is x–t upside down, because a = −(constant)x.
  • At x = ±A: v = 0, |a| maximum (pointing inwards).
  • At x = 0: |v| maximum, a = 0.
  • Speeding up when moving towards equilibrium; slowing down when moving away.
Quick check
Position–time graph with x on the vertical axis and t on the horizontal axis (no numerical scale). The vertical axis is +A+A/20−AxtRQP
?The graph shows the position x of an object in simple harmonic motion as a function of time t. Points P, Q and R are marked on the graph. Let aP, aQ and aR be the magnitudes of the object's acceleration at P, Q and R. Which of the following ranks them?
Mission 6

Displacement as a function of time

Cosine and sine starts0.050−0.0500.250.50t / sx / mx = A cos ωtT = 0.50 s0.015 m at 0.10 s0.050−0.0500.250.50t / sx / mReleased from rest at x = +AStarts at x = 0, moving in the + direction
  • x = A cos ωt: at t = 0, x = +A.
  • Calculator in radians.
  • A = 0.050 m, f = 2.0 Hz, t = 0.10 s: x = 0.050 cos(2π × 2.0 × 0.10) = 0.050 cos(1.26 rad) = 0.015 m.
Mission check

?A pendulum bob swings to and fro in a small arc. At the lowest point of its swing, what are its acceleration along its path and its speed?
Mission 7

Mission 7: Two identical oscillators start a moment apart. What single number says how far out of step they are?

Make a guess: Two identical oscillators start a moment apart. What single number says how far out of step they are?

Mission 7

Phase and phase difference

Phase differencextATΔtPQΔt = T/8, so Δφ = 2π × 1/8 = π/4Δφ = 2πΔt/T
  • Phase: how far through a cycle an oscillator is, as an angle. One cycle = 2π rad.
  • Phase difference between two oscillators with the same T: Δφ = 2π × Δt/T.
  • Δt = time between matching points (e.g. each one's maximum displacement).
  • In phase: Δφ = 0 (or 2π, 4π…). Antiphase: Δφ = π.
Quick check
?Two oscillators, P and Q, each have a time period of 0.80 s. Q reaches its maximum positive displacement 0.20 s after P does. What is the phase difference between P and Q, in radians?
Mission 7

Worked example

  • A = 0.040 m, T = 0.80 s, released from rest at x = +A at t = 0. ω = 2π/T = 7.85 rad s⁻¹.
  • x at t = 0.10 s: x = 0.040 cos(7.85 × 0.10) = 0.040 cos(0.785 rad) = 0.028 m.
  • First time at x = +0.020 m: cos ωt = 0.020/0.040 = 0.50 → ωt = 1.05 rad → t = 1.05 ÷ 7.85 = 0.13 s.
  • Calculator in radians for every step.
Quick check
?An object in SHM is released from rest at x = +0.060 m at time t = 0 and oscillates about x = 0 with a period of 1.2 s. What is the object's position at t = 0.20 s?
Mission 7

Isochronous oscillators

Two amplitudes, same periodxtTTlarge amplitudesmall amplitudeSame period T: zero crossings line up.
  • In SHM the period does not depend on the amplitude: an isochronous oscillator.
  • Larger amplitude → larger restoring force → larger speeds. More distance, covered faster: same T.
  • Test: time 20 oscillations at two different amplitudes. Same T.
  • A real pendulum is isochronous only for small amplitudes.
Quick check
Position–time graph with a legend above it: Trial 1 is the solid line and Trial 2 the dashed line. x (m) is on the verti0.100.050−0.05−0.100.40.81.21.6x / mt / sTrial 1Trial 2
?A student sets the same block–spring system oscillating twice, with different amplitudes. The graph shows the block's position x as a function of time t for trial 1 (solid line) and trial 2 (dashed line). Which claim is supported by the graph?
Mission check

Two floatsdisplacementt / s00.100.200.300.400.500.600.70PQ
?The graph shows displacement against time for two identical floats, P and Q, bobbing on water. Read the graph. What is the phase difference between the two floats?
Recap

The big ideas

Mission 1

  • pV = ⅓Nm⟨c²⟩.

Mission 2

  • Q = mcΔθ. Same energy and mass: lower c, bigger temperature rise.

Mission 3

  • Electrical method: E = VIt; c = P ÷ (m × gradient of θ–t). Energy lost to the surroundings makes c come out too high: insulate.

Mission 4

  • ω = 2π/T = 2πf (rad s⁻¹); v = ωr.
  • Constant speed in a circle means acceleration towards the centre: a = v²/r.
  • Also a = ω²r.

Mission 5

  • Centripetal force is the resultant of the real forces, towards the centre: F = mv²/r. There is no outward force.

Mission 6

  • SHM: restoring force ∝ displacement, always towards equilibrium.
  • a = −ω²x, with ω = 2π/T = 2πf.
  • Fastest at equilibrium (a = 0); at rest at ±A (|a| largest). v = gradient of x–t; a = gradient of v–t.

Mission 7

  • Phase difference Δφ = 2π Δt/T (radians); in phase 0, antiphase π.
  • SHM is isochronous: T does not depend on amplitude.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Thermal physics, circular motion and SHM for CCEA A-level Physics. 🎉

  1. Mission 1Molecules hit the walls at random. How can that add up to a pressure you can calculate exactly?
  2. Mission 2Under the same Sun, beach sand gets scorching while the sea stays cool. Why?
  3. Mission 3How do you measure the energy a material needs, when some always leaks away?
  4. Mission 4A car rounds a bend at a steady speed. Is it accelerating, and if so, how much?
  5. Mission 5Whirl a ball on a string in a circle. Is anything pulling it outwards?
  6. Mission 6Why does an oscillating mass on a spring move fastest at the one point where no overall force acts on it?
  7. Mission 7Two identical oscillators start a moment apart. What single number says how far out of step they are?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to A-Level Physics · CCEA