← A-Level Physics · CCEA · A-Level Physics revision
⭐ 0
CCEA A-level Physics (1210) · AS 1: Forces, Energy and Electricity (part 3)
Mini-Lesson

Forces, Energy and Electricity (part 3)

6 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1Hold a heavy bag still for ten minutes and your arms ache. How much work have you done on the bag?
  2. Mission 2Two smooth slides drop the same height: one steep, one gentle. Which gives you more speed at the bottom?
  3. Mission 3A cannon fires a ball forwards. Why does the cannon roll backwards, and more slowly than the ball?
  4. Mission 4Why can a stunt performer walk away from a fall onto an airbag that would kill on concrete?
  5. Mission 5Double a car's speed. How much longer is its braking distance?
  6. Mission 6Identical twins climb the same stairs, one running, one walking. Who does more work? Who is more powerful?
Mission 1

Mission 1: Hold a heavy bag still for ten minutes and your arms ache. How much work have you done on the bag?

Make a guess: Hold a heavy bag still for ten minutes and your arms ache. How much work have you done on the bag?

Mission 1

Work is energy transferred

One joule of workstartend1 Nmoves 1 m in the directionof the forcework done = 1 N × 1 m = 1 Jenergy transferred = 1 JDrawn to scale along the floor.
  • A force does work when its point of application moves in the direction of the force.
  • Work done = force × distance moved in the direction of the force.
  • Work done = energy transferred. Both in joules.
  • 1 J = the work done when a force of 1 N moves its point of application 1 m in its own direction.
  • Work done transfers energy from one form to another.
Mission 1

A force at an angle

A force at an angleFF cos θalong the displacement: does workF sin θno workθdisplacement
  • Only the component along the displacement does work.
  • W = Fs cos θ, θ = angle between the force and the displacement.
  • θ = 0: W = Fs. θ = 90°: W = 0. The force changes only the direction of motion.
Quick check
?A child pulls a sledge 25 m along level snow using a rope held at 30° above the horizontal. The tension in the rope is a constant 80 N. How much work does the tension do on the sledge?
Mission 1

Positive, negative or zero

Positive, negative or zero workPushpushdisplacementθ = 0work: +Frictionfrictiondisplacementθ = 180°work: −Level floornormal forcedisplacementθ = 90°work: 0Load held stillyour forcedisplacement = 0work: 0
  • Work is a scalar. Its sign shows which way energy goes.
  • θ < 90°: positive work. The force transfers energy to the object.
  • θ > 90°: negative work. The force takes energy away: friction, braking.
  • θ = 90°: zero. A crate slides along a level floor: its weight and the normal force do no work.
  • No displacement: zero. Holding a load still does no work on it.
Quick check
?A worker uses a rope to lower a box straight down at constant speed. Which statement about the work done on the box during the descent is correct?
Mission 1

Worked example: pushing a crate

  • A 150 N push at 40° below the horizontal moves a crate 6.0 m along a level floor. Friction is 90 N.
  • Push: W = 150 × 6.0 × cos 40° = +690 J.
  • Friction (θ = 180°): W = 90 × 6.0 × cos 180° = −540 J.
  • Weight and normal force (θ = 90°): 0 J each.
  • Each force's work is found separately. Use the angle between that force and the displacement.
Mission check

?A student carries a bag of weight 15 N up a flight of stairs at constant velocity. The bag moves 4.0 m horizontally and rises 3.0 m, so it travels 5.0 m along the stairs. How much work does the student's upward force do on the bag?
Mission 2

Mission 2: Two smooth slides drop the same height: one steep, one gentle. Which gives you more speed at the bottom?

Make a guess: Two smooth slides drop the same height: one steep, one gentle. Which gives you more speed at the bottom?

Mission 2

Kinetic energy

  • Kinetic energy: the energy an object has because it is moving.
  • k.e. = ½mv²
  • A scalar: never negative; no direction.
  • Double the mass → double the kinetic energy. Double the speed → four times the kinetic energy.
Mission 2

Gravitational potential energy

  • Gravitational potential energy: energy due to position in a gravitational field.
  • Δp.e. = mgΔh
  • Valid near the surface, where g is roughly constant.
Quick check
?Object A has mass m and moves at speed 2v. Object B has mass 2m and moves at speed v. What is the kinetic energy of object A divided by the kinetic energy of object B?
Mission 2

Conservation of energy

Energy stores of a falling ballTop, at restgravitational PEkineticinternaltotalBottom, no draggravitational PEkineticinternaltotalBottom, with draggravitational PEkineticinternaltotalsame totalBars to scale; the drag split is illustrative.
  • Energy cannot be created or destroyed.
  • It is transferred between stores.
  • Stores include kinetic, gravitational, elastic, internal (thermal), chemical and nuclear.
  • No friction or drag: mechanical energy stays constant. Loss of potential energy = gain of kinetic energy.
  • With friction or drag: some becomes internal energy and sound. The total is still conserved.
Mission 2

Worked example: a falling ball

  • A ball is dropped from 1.8 m. Air resistance is negligible.
  • Loss of GPE = gain of KE: mgh = ½mv². m cancels: v = √(2gh).
  • v = √(2 × 9.81 × 1.8) = 5.9 m s⁻¹.
  • Only the vertical drop matters. A smooth slide of any shape, same drop: the same speed.
  • Required task: drop a mass through a light gate. Compare mgΔh with ½mv².
Quick check
?A child slides from rest down a straight slide with negligible friction and reaches a speed v at the bottom. A second straight slide has the same steepness, but its top is four times as high above its bottom. What speed does the child reach at the bottom of the second slide?
Mission check

?Three identical stones are thrown from the top of a sea cliff with the same speed: one straight up, one horizontally and one straight down. Air resistance is negligible. Which stone hits the sea with the greatest speed?
Mission 3

Mission 3: A cannon fires a ball forwards. Why does the cannon roll backwards, and more slowly than the ball?

Make a guess: A cannon fires a ball forwards. Why does the cannon roll backwards, and more slowly than the ball?

Mission 3

Momentum

Momentum is a vectorpositiveBefore+5.0 m s⁻¹initial p = +1.0After−5.0 m s⁻¹final p = −1.0Changefinal−initialΔp = −2.0Δp = final p − initial pMass 0.20 kg; momentum in kg m s⁻¹.Same speed, but the momentum changes.
  • Momentum p = mv: mass × velocity.
  • Unit: kg m s⁻¹ (the same as N s).
  • A vector: same direction as the velocity. Choose a positive direction; the other way is negative.
  • A 0.20 kg ball hits a wall at 5.0 m s⁻¹ and bounces straight back at 5.0 m s⁻¹. Its momentum changes, from +1.0 to −1.0 kg m s⁻¹, though its speed does not.
Quick check
?A cricket ball of mass m moving horizontally with speed v is struck by a bat. It leaves the bat moving horizontally with speed 3v/2 in the opposite direction. Taking the ball's initial direction of motion as positive, what is the change in the ball's momentum?
Mission 3

Conservation of momentum

Equal and opposite pushesABB pushes AA pushes BEqual and opposite forces, for the same time.MomentumbeforeABtotalafterABtotaltotal unchangedBars to scale, arbitrary momentum units.
  • The total momentum of a system stays constant unless a resultant external force acts on it.
  • Why: in a collision, A pushes B and B pushes A with equal and opposite forces (Newton's third law), for the same time.
  • So A's change in momentum is equal and opposite to B's. The total does not change.
  • Total momentum before = total momentum after. Add the momenta with signs.
Mission 3

Worked example: a collision

A sticking collisionBefore1.5 kg0.50 kg4.0 m s⁻¹at restAfter: stuck together1.5 kg0.50 kg3.0 m s⁻¹p = 6.0 kg m s⁻¹ before and afterVelocity arrows to scale.
  • Glider A, 1.5 kg, moves at 4.0 m s⁻¹ along an air track into glider B, 0.50 kg, at rest. They stick together.
  • Before: p = 1.5 × 4.0 + 0.50 × 0 = 6.0 kg m s⁻¹.
  • After: (1.5 + 0.50) × v = 2.0v.
  • 2.0v = 6.0, so v = 3.0 m s⁻¹, in A's original direction.
Mission 3

Explosions

An explosion from restBefore: at rest, spring compressed2.0 kg3.0 kgtotal p = 0After2.0 kg3.0 kg1.8 m s⁻¹1.2 m s⁻¹momentum3.6 kg m s⁻¹3.6 kg m s⁻¹Equal and opposite: total p still 0.Velocity and momentum arrows to scale.
  • Everything starts at rest: total momentum = 0. So it is still 0 afterwards.
  • Two pieces: they move off in opposite directions, with equal and opposite momenta.
  • 2.0 kg and 3.0 kg blocks pushed apart by a spring. The 3.0 kg block moves at 1.2 m s⁻¹.
  • 2.0 × v = 3.0 × 1.2 = 3.6, so v = 1.8 m s⁻¹ the other way. Lighter piece: faster.
  • Kinetic energy increases (0 → 5.4 J): it comes from energy stored in the compressed spring (or in the explosive, for a cannon).
Quick check
?Two blocks, of masses 1.0 kg and 4.0 kg, are held at rest on a horizontal surface with negligible friction, with a compressed spring between them. When they are released, the 1.0 kg block moves off at 2.0 m s⁻¹. Which statement about the 4.0 kg block is correct?
Mission 3

Elastic or inelastic?

Types of collisionafter ÷ beforeelasticpEkinelasticpEkperfectlyinelasticpEk= beforeMomentum: always conserved.Kinetic energy: only in an elastic collision.Bars show after as a fraction of before; theinelastic values are illustrative.
  • Kinetic energy Eₖ = ½mv².
  • Momentum is conserved in every collision (no resultant external force). Kinetic energy is not always.
  • Elastic: total kinetic energy unchanged.
  • Inelastic: total kinetic energy decreases. It becomes internal (thermal) energy, sound, and energy of permanent deformation.
  • Perfectly inelastic: the bodies stick together and share one velocity. Biggest loss of kinetic energy.
  • Total energy is always conserved; only the kinetic part changes.
  • Test it with the glider collision: kinetic energy before = ½ × 1.5 × 4.0² = 12 J; after = ½ × 2.0 × 3.0² = 9.0 J. 3.0 J transformed into other forms: inelastic.
Quick check
?A 0.50 kg trolley moving at 5.0 m s⁻¹ collides with a 3.0 kg trolley at rest on a level track with negligible friction. After the collision, the 0.50 kg trolley moves backwards at 1.0 m s⁻¹ and the 3.0 kg trolley moves forwards at 1.0 m s⁻¹. How much of the system's kinetic energy is transformed into other forms of energy?
Mission 3

Testing conservation in the lab

Measuring velocities with light gatesABlight gatelight gatecardv = card length ÷ time the cardblocks the light gateAir track: friction negligible.
  • Air track (or low-friction runway) and light gates: card length ÷ time = velocity of each glider, before and after.
  • Find each mass with a balance. Calculate total momentum before and after; compare.
  • Then compare total kinetic energy before and after: elastic or inelastic?
Mission check

?A person of mass 60 kg stands in a rowing boat of mass 120 kg. Both are at rest, and water resistance is negligible. The person jumps horizontally from the boat onto a jetty, leaving at 1.0 m s⁻¹. Which statement about the boat immediately afterwards is correct?
Mission 4

Mission 4: Why can a stunt performer walk away from a fall onto an airbag that would kill on concrete?

Make a guess: Why can a stunt performer walk away from a fall onto an airbag that would kill on concrete?

Mission 4

Force is the rate of change of momentum

  • F = Δp/Δt: resultant force = rate of change of momentum.
  • Constant mass: Δp/Δt = mΔv/Δt = ma. F = ma is the special case.
  • Second law: the rate of change of momentum is proportional to the resultant force, and in its direction.
Mission 4

Impulse

Impulse on a rebounding ball+ (away from the wall)Beforeu = −25 m s⁻¹p = −1.5 kg m s⁻¹Afterv = +15 m s⁻¹p = +0.90 kg m s⁻¹Impulse = change in momentump afterimpulsep beforeimpulse (N s): away from the wall,along the force from the wall,not along the incoming velocityArrows to scale.
  • Impulse = Ft = mv − mu.
  • Unit: N s, the same as kg m s⁻¹.
  • A vector: in the direction of the resultant force, which need not be the direction of motion.
Mission 4

Worked example: a rebound

  • A 0.060 kg ball hits a wall at 25 m s⁻¹ and rebounds at 15 m s⁻¹. Contact time 0.020 s.
  • Take away from the wall as positive.
  • u = −25 m s⁻¹, v = +15 m s⁻¹.
  • Δp = m(v − u) = 0.060 × (15 − (−25)) = 2.4 N s, away from the wall.
  • Average force = 2.4 ÷ 0.020 = 120 N, away from the wall.
  • Trap: 0.060 × (15 − 25) = −0.60 N s. Velocity is a vector; the direction reverses.
Quick check
?A sledge on level snow is pulled horizontally with a constant force of 60.0 N for 4.00 s. Throughout this time it slides forwards and the frictional force on it is 22.0 N. What is the magnitude of the impulse delivered to the sledge by the resultant force during the 4.00 s?
Mission 4

Longer contact, smaller force

Two ways to stopforcetime0.012 s0.12 sHard dashboard: 0.012 s,average force ≈ 82 kNSeat belt and crumple zone:0.12 s, average force ≈ 8.2 kNEqual areas: the same change in momentum.Ten times the time: one tenth of the force.Drawn to scale (illustrative smooth humps).
  • Stopping: the change in momentum is fixed by the mass and the speed.
  • Longer stopping time → smaller average force.
  • A 70 kg occupant stops from 14 m s⁻¹: Δp = 980 N s.
  • Seat belt and crumple zone, 0.12 s: F ≈ 8.2 kN. Hard dashboard, 0.012 s: F ≈ 82 kN.
  • Same idea: airbags, bicycle helmets, packaging foam, bending your knees on landing.
Mission check

?Two identical 0.50 kg gliders on an air track each move at 2.0 m s⁻¹ towards an obstacle. Glider 1 hits a steel buffer and bounces straight back at 2.0 m s⁻¹; the contact lasts 0.010 s. Glider 2 hits a foam pad and stops; the contact lasts 0.040 s. How many times larger is the average force on glider 1 than the average force on glider 2?
Mission 5

Mission 5: Double a car's speed. How much longer is its braking distance?

Make a guess: Double a car's speed. How much longer is its braking distance?

Mission 5

Net work changes kinetic energy

Work–energy theoremFFspeed uspeed vsFs = ½mv² − ½mu²F = resultant force
  • The work done by the resultant force = the change in kinetic energy.
  • ½mv² − ½mu² = Fs, for a constant resultant force F.
  • Net work positive: speeds up. Negative: slows down. Zero: constant speed.
Mission 5

Worked example: braking

  • A 1200 kg car at 20 m s⁻¹ brakes with a constant 8000 N resultant force.
  • Final KE = 0, so F × s = ½mu².
  • s = ½ × 1200 × 20² ÷ 8000 = 30 m.
  • At 40 m s⁻¹: s = ½ × 1200 × 40² ÷ 8000 = 120 m.
  • Braking distance ∝ u²: double the speed, four times the distance.
Quick check
?A child on a toboggan slides across level snow. The child and toboggan have a total mass of 50 kg and slow down from 8.0 m s⁻¹ to 6.0 m s⁻¹. What is the magnitude of the net work done on the child–toboggan system during this time?
Mission check

?A block on a level, frictionless surface is sped up by a constant horizontal force. The work needed to speed the block up from rest to speed v is W. How many times W is needed to speed the block up from v to 3v?
Mission 6

Mission 6: Identical twins climb the same stairs, one running, one walking. Who does more work? Who is more powerful?

Make a guess: Identical twins climb the same stairs, one running, one walking. Who does more work? Who is more powerful?

Mission 6

Power

Same work, different powerRunning4.0 sWalking8.0 sworkworkpowerpowerBars to scale: work equal, power 2 : 1.
  • Power = rate of doing work = rate of energy transfer.
  • P = work done / time taken
  • Unit: the watt. 1 W = 1 J s⁻¹.
  • Same work in half the time: twice the power.
Mission 6

Worked example: climbing stairs

  • A 60 kg student climbs stairs 3.0 m high in 4.0 s.
  • Work done = mgΔh = 60 × 9.81 × 3.0 = 1.8 kJ (1766 J).
  • Power = 1766 ÷ 4.0 = 440 W.
  • Walk up in 8.0 s: the same work, half the power.
Mission 6

Power and speed: P = Fv

Power and speeddriving600 Nresistive600 Nv = 30 m s⁻¹Constant velocity: forces balance.P = Fv = 600 × 30 = 18 kW
  • A force F moves its point of application Δs in time Δt: W = FΔs.
  • P = W/Δt = F × Δs/Δt = Fv.
  • Car at a steady 30 m s⁻¹: driving force = resistive forces = 600 N.
  • Power needed = 600 × 30 = 18 kW.
Quick check
?A cyclist rides along a level road at a constant speed of 8.0 m s⁻¹. The total resistive force on the cyclist and bicycle is 25 N. What power does the cyclist's driving force develop?
Mission 6

Efficiency

Efficiencyinput200 Wuseful 118 Wwasted 82 W(thermal energy)efficiency = 118 ÷ 200 = 0.59 = 59%Widths to scale.
  • Efficiency = useful energy output ÷ total energy input.
  • Or: useful power output ÷ total power input.
  • Multiply by 100 for a percentage.
  • Always less than 100%. The rest is wasted, mostly as thermal energy in the surroundings.
Mission 6

Worked example: a motor

  • An electric motor takes 200 W. It lifts a 20 kg load 3.0 m in 5.0 s.
  • Useful power = mgΔh/t = 20 × 9.81 × 3.0 ÷ 5.0 = 118 W.
  • Efficiency = 118 ÷ 200 = 0.59, or 59%.
  • Wasted power = 200 − 118 = 82 W, mostly heating the motor and its surroundings.
Quick check
?A Sankey diagram for a car engine has an input arrow representing 200 kJ of chemical energy from the fuel. It divides into four output arrows: 60 kJ of useful mechanical work, 100 kJ of thermal energy carried away by the exhaust gases, 30 kJ of thermal energy removed by the cooling system, and 10 kJ of sound. What is the efficiency of the engine?
Mission 6

Why efficiency matters

  • In everyday use, "energy conservation" means using less energy. (The physics law says energy is never lost.)
  • Wasted energy spreads into the surroundings as thermal energy. It is very hard to use again.
  • Higher efficiency: the same useful output from less fuel or electricity. That means lower cost and smaller use of finite fuel reserves.
  • For fossil-fuel power, less fuel burned also means less CO2 emitted.
  • Examples: LED lamps instead of filament lamps; loft and wall insulation; regenerative braking in electric vehicles.
Mission check

?Motor A raises a 200 N load through 3.0 m in 6.0 s. Motor B raises a 100 N load through 6.0 m in 4.0 s. Both lift at constant speed. Which statement is correct?
Recap

The big ideas

Mission 1

  • W = Fs cos θ: only the component along the displacement does work; work done = energy transferred.

Mission 2

  • KE = ½mv²; ΔPE = mgΔh. Without resistive forces, PE lost = KE gained: only the height dropped matters.

Mission 3

  • p = mv, a vector. With no resultant external force, total momentum is conserved in every collision and explosion.
  • Elastic: total Eₖ unchanged. Inelastic: total Eₖ decreases. Explosions: Eₖ increases from a stored energy.

Mission 4

  • Impulse = Ft = mv − mu; a longer contact time means a smaller average force.

Mission 5

  • ½mv² − ½mu² = Fs for a constant force.

Mission 6

  • P = W/t = Fv; efficiency = useful output ÷ total input (energy or power).
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Forces, Energy and Electricity (part 3) for CCEA A-level Physics. 🎉

  1. Mission 1Hold a heavy bag still for ten minutes and your arms ache. How much work have you done on the bag?
  2. Mission 2Two smooth slides drop the same height: one steep, one gentle. Which gives you more speed at the bottom?
  3. Mission 3A cannon fires a ball forwards. Why does the cannon roll backwards, and more slowly than the ball?
  4. Mission 4Why can a stunt performer walk away from a fall onto an airbag that would kill on concrete?
  5. Mission 5Double a car's speed. How much longer is its braking distance?
  6. Mission 6Identical twins climb the same stairs, one running, one walking. Who does more work? Who is more powerful?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to A-Level Physics · CCEA