← A-Level Physics · CCEA · A-Level Physics revision
⭐ 0
CCEA A-level Physics (1210) · A2 2: Fields, Capacitors and Particle Physics (part 3)
Mini-Lesson

Fields, Capacitors and Particle Physics (part 3)

7 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1Move a metal rod or spin a coil near a magnet, and a voltage appears. What decides how big it is?
  2. Mission 2An oscilloscope draws a voltage wave. How do you read its size and its frequency off the screen?
  3. Mission 3A transformer changes the voltage of a supply with no moving parts. How does it do it?
  4. Mission 4An electron and a proton feel the same force between charged plates. Which swerves more, and by how much?
  5. Mission 5A magnetic field can steer a beam of charged particles. Can it also make them go faster?
  6. Mission 6Why are the most powerful particle accelerators built as rings many kilometres around?
  7. Mission 7Antimatter is real. How could you tell an antiparticle from its ordinary twin?
Mission 1

Mission 1: Move a metal rod or spin a coil near a magnet, and a voltage appears. What decides how big it is?

Make a guess: Move a metal rod or spin a coil near a magnet, and a voltage appears. What decides how big it is?

Mission 1

The a.c. generator

Simple a.c. generatorNSaxleloadslip ringsbrushescoil turnsabout the axleOne turn of the coil0°90°180°270°flux linkageemftimeAngle: between the field and the coil normal.Field lines run left to right.
  • A coil turns at a steady rate in a uniform field. Slip rings and brushes connect it to the circuit.
  • As it turns, the flux linkage keeps changing, so an emf is induced (Faraday). It reverses every half turn: alternating.
  • Coil plane perpendicular to the field: flux linkage greatest, momentarily not changing. emf = 0.
  • Coil plane parallel to the field: flux linkage zero but changing fastest. emf greatest.
  • Larger B, coil area or number of turns: larger peak emf.
  • Turn it twice as fast: flux linkage changes twice as fast. Peak emf doubles; period halves.
  • A metal rod moved across a field works the same way: as it moves, the flux it sweeps through changes, so an emf appears across it.
Mission 1

The emf of a rotating coil

Flux linkage and emf of a rotating coilTurning at ωNφEBANBANωperiodTurning at 2ωNφEBAN2BANωperiodNφ = BAN cos ωt, E = BANω sin ωtPeak values marked on the axes. Same time scalein both pairs.
  • Angle between field and coil normal: θ = ωt, where ω = 2πf.
  • Flux linkage: Nφ = BAN cos ωt.
  • emf = −(gradient of the flux-linkage graph). The gradient of BAN cos ωt is −BANω sin ωt, so the emf is +BANω sin ωt.
  • E = BANω sin ωt. Peak emf E0 = BANω.
  • Example: 200 turns, area 4.0 × 10⁻³ m², B = 0.050 T, 50 revolutions per second. ω = 2π × 50 = 314 rad s⁻¹; peak = 0.050 × 4.0 × 10⁻³ × 200 × 314 = 13 V.
Quick check
?A coil turns at a steady rate in a uniform magnetic field, making one full turn in a time T. At t = 0 the plane of the coil is perpendicular to the field. At which of these times is the size of the induced emf greatest?
Quick check
?A rectangular coil of 40 turns measures 6.0 cm by 4.0 cm. It rotates at a constant 25 revolutions per second about an axis through its centre, parallel to its 6.0 cm sides and perpendicular to a uniform magnetic field of strength 0.10 T. What is the peak emf induced in the coil?
Quick check
?A rectangular coil rotates at a constant frequency in a uniform magnetic field. A graph of the induced emf against time is a sine curve that is zero at t = 0, 10 ms, 20 ms, 30 ms and 40 ms, with maxima of +4.0 V at 5 ms and 25 ms and minima of −4.0 V at 15 ms and 35 ms. The coil is then made to rotate at 40 revolutions per second in the same field. What is the new peak emf?
Mission check

?A simple a.c. generator's coil turns 5.0 times per second, and the emf has a peak value of 3.0 V. The coil is rewound with half as many turns and is then turned 15 times per second. Which describes the new emf?
Mission 2

Mission 2: An oscilloscope draws a voltage wave. How do you read its size and its frequency off the screen?

Make a guess: An oscilloscope draws a voltage wave. How do you read its size and its frequency off the screen?

Mission 2

Alternating voltage

An alternating pdpdtimeV₀2V₀TV₀: peak, centre line to a crest2V₀: peak-to-peak, crest to troughT: period, one cycle (crest to crest)f = 1/T. UK mains: 50 Hz, so T = 20 ms.
  • a.c.: the current reverses direction again and again. Here (mains, generators) the pd follows a sine curve.
  • Peak value V0: from the centre line to a crest.
  • Peak-to-peak: crest to trough = 2V0.
  • Period T: time for one cycle. Frequency f = 1/T, in Hz.
  • UK mains: f = 50 Hz, so T = 20 ms.
Mission 2

Reading an oscilloscope

Reading a trace6.0divone cycle: 4.0 divY-gain 2.0 V/div · time-base 5.0 ms/div6.0 × 2.0 V = 12 V peak-to-peak; V₀ = 6.0 V4.0 × 5.0 ms = 20 ms = T; f = 1/T = 50 Hz
  • The CRO draws pd (up) against time (across) on a grid of divisions.
  • Y-gain (volts per division): pd = number of divisions × V/div.
  • Time-base (time per division): time = number of divisions × time/div.
  • Measure peak-to-peak and halve it: the centre line is hard to judge.
  • Measure several cycles and divide: smaller percentage uncertainty.
  • dc input: a flat line, shifted up or down by the pd.
Mission 2

Worked example

  • Y-gain 2.0 V/div. Time-base 5.0 ms/div.
  • Trace: 6.0 divisions peak-to-peak; one cycle is 4.0 divisions wide.
  • Peak-to-peak = 6.0 × 2.0 = 12 V, so V0 = 6.0 V.
  • T = 4.0 × 5.0 = 20 ms, so f = 1/0.020 = 50 Hz.
Quick check
?An alternating pd is displayed with the time-base set to 2.0 ms per division. Exactly three complete cycles span 6.0 divisions. What is the frequency of the pd?
Quick check
?An alternating pd is displayed with the Y-gain set to 0.50 V per division. The trace measures 6.4 divisions from crest to trough. What is the peak pd?
Mission check

?A signal generator gives a sine wave of peak pd 1.5 V and frequency 500 Hz. It is displayed with the Y-gain at 0.50 V per division and the time-base at 0.50 ms per division. How tall is the trace from crest to trough, and how wide is one cycle?
Mission 3

Mission 3: A transformer changes the voltage of a supply with no moving parts. How does it do it?

Make a guess: A transformer changes the voltage of a supply with no moving parts. How does it do it?

Mission 3

How a transformer works

A transformeralternatingfluxa.c. inloadprimary coil (input)secondary coil (output)laminated soft iron coreNo wire joins the two coils.Circuit symbol:primarysecondary
  • Two coils, primary and secondary, wound on one soft iron core. No wire joins them.
  • a.c. in the primary makes an alternating magnetic flux in the core.
  • The core carries that flux through the secondary.
  • Changing flux linkage in the secondary induces an alternating emf (Faraday's law).
  • Steady dc: steady flux, no output (except briefly at switch-on and switch-off).
Mission 3

The turns ratio

  • Same flux in both coils, so the same emf per turn.
  • Vs/Vp = Ns/Np.
  • Step-up: Ns > Np, so Vs > Vp. Step-down: Ns < Np, so Vs < Vp.
  • Ideal transformer (100 % efficient): IsVs = IpVp. Step the pd up and the current steps down.
  • For an ideal transformer: Vs/Vp = Ns/Np = Ip/Is.
Mission 3

Worked example

  • 230 V to 12 V. Primary: 2300 turns.
  • Ns = Np × Vs/Vp = 2300 × 12/230 = 120 turns.
  • Ideal; output current 2.0 A. Output power = 12 × 2.0 = 24 W.
  • Input current = 24/230 = 0.10 A.
Quick check
?A transformer has 400 turns on its primary coil and 1600 turns on its secondary coil. The primary is connected to a 12 V a.c. supply. What is the pd across the secondary?
Mission 3

Why real transformers waste energy

Eddy currents in the coreCross-section of the core: flux into the pageSolid core:large eddy currents,lots of heatingLaminated core:tiny loops, one perinsulated sheet⊗ flux into the page. Red: eddy currents, inthe plane perpendicular to the flux.
  • Efficiency = IsVs/IpVp (output power ÷ input power).
  • Coil resistance: I²R heating in the windings. Use thick copper wire.
  • Eddy currents: the changing flux induces currents in the iron core, which heat it. Make the core from thin laminations, insulated from each other.
  • Magnetising losses: energy to magnetise and demagnetise the core each cycle. Use soft iron.
  • Flux leakage: not all the flux links the secondary. Wind the coils close together, on the same core.
Quick check
?A transformer takes 0.50 A from a 230 V supply. Its output is 9.0 A at 12 V. What is its efficiency?
Quick check
?A transformer's laminated core is replaced by a solid iron core of the same shape and size. What is the main effect?
Mission 3

Sending power at high voltage

Sending power at high voltagePower stationgenerates the powerStep-up transformerpd up, current downTransmission lineshigh pd, low currentStep-down transformerpd down for safe useHomeslow pdSending 20 MW through 5.0 Ω of cable:at 25 kV: I = 800 A, loss = 3.2 MWat 400 kV: I = 50 A, loss = 12.5 kWLoss in the cables = I²R
  • Power sent: P = IV. For a fixed P, a higher V means a smaller current I.
  • Power lost in the cables: Ploss = I²R.
  • Raise V by a factor k: I falls by k, so the loss falls by k².
  • Example: 20 MW through cables of total resistance 5.0 Ω.
  • At 25 kV: I = 800 A; loss = 800² × 5.0 = 3.2 MW (16 %).
  • At 400 kV: I = 50 A; loss = 50² × 5.0 = 12.5 kW (0.06 %).
  • Step-up transformers at the power station; step-down near homes. This needs a.c.
Quick check
?A power station sends a fixed power along a transmission line. The engineers want to cut the power wasted in the cables to one quarter of its present value. What must they do to the transmission pd?
Mission check

?A transformer has 2000 turns on its primary coil and 100 turns on its secondary coil. What is the secondary pd (i) when the primary is on a 230 V a.c. supply, and (ii) a few seconds after the primary is switched to a 230 V battery?
Mission 4

Mission 4: An electron and a proton feel the same force between charged plates. Which swerves more, and by how much?

Make a guess: An electron and a proton feel the same force between charged plates. Which swerves more, and by how much?

Mission 4

The force on a charge in a field

Forces on charges between parallel plates+−+−+−+−+−+−+−−+FFelectronprotonE+400 V0 VPlates 2.0 cm apart. Gravity negligible.
  • F = qE, the same everywhere in a uniform field.
  • Positive charge: force along the field (towards the negative plate).
  • Negative charge: force against the field (towards the positive plate).
  • Between parallel plates: E = V/d. 400 V across 2.0 cm → E = 2.0 × 10⁴ V m⁻¹.
  • Electron or proton there: |F| = 1.60 × 10⁻¹⁹ × 2.0 × 10⁴ = 3.2 × 10⁻¹⁵ N. Same size, opposite directions.
Mission 4

Same force, different acceleration

  • Constant force → constant acceleration: a = F/m.
  • Electron: a = 3.2 × 10⁻¹⁵ / 9.11 × 10⁻³¹ = 3.5 × 10¹⁵ m s⁻².
  • Proton: a = 3.2 × 10⁻¹⁵ / 1.67 × 10⁻²⁷ = 1.9 × 10¹² m s⁻².
  • The electron's mass is about 1/1800 of the proton's, so its acceleration is about 1800 times greater.
  • Gravity is negligible: the electron's weight is about 10⁻²⁹ N, some 10¹⁴ times smaller than 3.2 × 10⁻¹⁵ N.
Quick check
?Two horizontal parallel plates, 2.5 cm apart in a vacuum, have a potential difference of 150 V between them. What is the magnitude of the acceleration of an electron between the plates? Gravity is negligible. Take e = 1.60 × 10⁻¹⁹ C and me = 9.11 × 10⁻³¹ kg.
Mission check

?A proton and an alpha particle are placed, one at a time, at the same point in a uniform electric field. The alpha particle has twice the charge of the proton and about four times its mass. Gravity is negligible. What is the ratio (acceleration of the alpha particle) / (acceleration of the proton)?
Mission 5

Mission 5: A magnetic field can steer a beam of charged particles. Can it also make them go faster?

Make a guess: A magnetic field can steer a beam of charged particles. Can it also make them go faster?

Mission 5

Force on a moving charge

Force on a moving chargeB into the pagevF+Moving along the fieldB+vF = 0+at restF = 0
  • A current is moving charge, so a single moving charge in a field also feels a force.
  • F = Bqv (velocity ⟂ field).
  • Zero force on a charge at rest, or moving along the field.
  • Example: an electron at 3.0 × 10⁶ m s⁻¹ at right angles to a 0.20 T field: F = 1.60 × 10⁻¹⁹ × 3.0 × 10⁶ × 0.20 = 9.6 × 10⁻¹⁴ N.
Mission 5

Which way?

Which way is the force?Fleming’s left-hand rulesecond finger: currentcurrent: the way a positive charge movesthumb: force (motion)first finger: field, into the pagevF+protonvF−electronelectron: second finger opposite its motion
  • Fleming's left-hand rule, with the second finger along the conventional current: the direction a positive charge moves.
  • For an electron, point the second finger opposite to its motion.
  • The force is always ⟂ to the velocity, so it does no work: the speed and kinetic energy never change.
Quick check
?An electron moves towards the right of the page, in the plane of the page, through a uniform magnetic field directed into the page. What is the direction of the magnetic force on the electron at that instant?
Mission check

?Two protons enter two separate regions at the same speed. Region 1 contains only a uniform electric field; region 2 contains only a uniform magnetic field. Each proton enters at right angles to the field lines. Gravity is negligible. A short time later, which statement is correct?
Mission 6

Mission 6: Why are the most powerful particle accelerators built as rings many kilometres around?

Make a guess: Why are the most powerful particle accelerators built as rings many kilometres around?

Mission 6

Electric fields push, magnetic fields steer

Electric fields push, magnetic fields steerElectric fieldMagnetic field+−fieldspeeds up: gainsenergy = charge × Vpd Vsame speed,direction changes× field into pagepositive chargevelocityforceImages on the left at equal time intervals.Force on a positive charge, field into thepage: anticlockwise path.
  • Electric field: force along the field, so it does work on a charge. Energy gained crossing a pd V: charge × V.
  • Recap, magnetic field: No work done, so the speed stays the same; only the direction changes. A uniform B field bends the path into a circle, r = mv/(Bq): more momentum, bigger circle.
Mission 6

The synchrotron

Synchrotronbeam pipe: fixed radiusB increased asmomentum increasesbeams collidehead-onbending magnetfocusing magnetaccelerating cavitydetectortwo beams,opposite directionsSchematic, not to scale: a real ring has manymore magnets.
  • A ring of fixed radius: an evacuated beam pipe.
  • Bending magnets keep the particles on the ring. Focusing magnets keep the beam narrow.
  • Accelerating cavities: an alternating electric field gives the particles energy each lap.
  • As momentum grows, the B field is increased in step, so the radius stays the same.
  • The frequency of the accelerating field is matched to the particles' lap time.
  • Two beams can travel in opposite directions and collide head-on.
Mission 6

Relativistic mass increase

Speed against kinetic energycspeed of lightspeedkinetic energyrises quicklyextra energy adds very little speedSketch, no scale. The curve gets ever closer toc but never reaches it.
  • Keep supplying energy: at first the speed rises quickly.
  • Near the speed of light, extra energy adds very little speed.
  • The particle behaves as if its mass increases: the relativistic mass.
  • Physicists today usually say its energy and momentum rise without limit while its mass stays fixed. CCEA's older term, relativistic mass, describes the same effect.
  • Momentum (mass × velocity) keeps rising, so the B field must keep rising to hold the radius.
  • The speed is almost constant near c, so the lap time hardly changes.
  • No particle with mass reaches the speed of light.
Quick check
?Protons circulate in a synchrotron at constant energy. A fault makes the field of the bending magnets fall slightly. What happens to the protons?
Quick check
?Two protons each gain the same energy on one lap. One was moving at 0.50c, the other at 0.99c. Which statement is correct?
Mission check

?A ring's bending magnets already run at their maximum field. Engineers want protons with three times the momentum. What must they do?
Mission 7

Mission 7: Antimatter is real. How could you tell an antiparticle from its ordinary twin?

Make a guess: Antimatter is real. How could you tell an antiparticle from its ordinary twin?

Mission 7

Antimatter

Mirror twinse−electroncharge −ee+positroncharge +e↔same masspprotoncharge +ep̄antiprotoncharge −e↔both 1.0073 unneutroncharge 0n̄antineutroncharge 0↔both 1.0087 uνneutrinocharge 0ν̄antineutrinocharge 0↔both negligibleSame mass, opposite charge. Neutral pairs: bothcharges 0.
  • Every particle has an antiparticle: the same mass, the opposite charge.
  • electron e⁻ ↔ positron e⁺ · proton p ↔ antiproton p̄ · neutron n ↔ antineutron n̄ · neutrino ν ↔ antineutrino ν̄.
  • Antiparticles are real: positrons come out of β⁺ decay, and hospitals use them in PET scans.
  • A particle and its antiparticle can annihilate: their mass becomes photons.
Quick check
Table with four columns headed Row, Particle, Charge and Mass. The row numbered 1 lists positron (e⁺), charge +e, mass aRowParticleChargeMass1positron (e⁺)+eabout 1 u2alpha particle (α)+2eabout 4 u3neutrino (ν)0negligible4antineutrino (ν̄)0negligible
?Predict first. The table shows the charge and mass of four particles that can be emitted when nuclei decay. One entry in the table is incorrect. Which row contains the incorrect entry?
Mission 7

Particles from nuclear decay

  • α particle (α, ⁴2He): 2 protons + 2 neutrons, a helium-4 nucleus. Charge +2e, mass ≈ 4 u.
  • Electron (e⁻, β⁻): charge −e, mass ≈ 0.00055 u.
  • Positron (e⁺, β⁺): charge +e, the same mass as the electron.
  • Neutrino (ν) and antineutrino (ν̄): no charge, negligible mass.
Mission 7

Reading off an antiparticle

Property flipe−electrone+positronmass0.00055 umass0.00055 usamerest energy0.511 MeVrest energy0.511 MeVsamecharge−echarge+eflippedAny particle and its antiparticle: mass andrest energy the same, charge (and every otherconserved number) flipped.
  • Same: mass, so the same rest energy.
  • Opposite: charge (and other conserved quantities you will meet later).
  • Symbol: a bar over the particle's symbol: p̄, n̄, ν̄. Exception: e⁺ for the positron.
  • The antineutron is neutral, like the neutron, but it is not the same particle.
Quick check
?A proton has charge +e and rest energy 938.3 MeV. Which describes the antiproton?
Mission check

Diagram of two horizontal parallel plates, the upper one marked + and the lower one marked −. A beam enters from the lef+++−−−1234v
?A beam of electrons enters the region between two oppositely charged parallel plates with velocity v, as shown, and follows track 3. A beam of positrons then enters with the same velocity. The figure shows four possible tracks, numbered 1 to 4 (not drawn to scale). Which track do the positrons follow?
Recap

The big ideas

Mission 1

  • Rotating coil: emf = BANω sin ωt; greatest when the coil plane is parallel to the field.

Mission 2

  • Read a trace: pd = divisions × V/div; T = divisions × time/div; f = 1/T. Measure peak-to-peak and several cycles.

Mission 3

  • A transformer needs a changing flux: a.c. in, a.c. out. Ideal: Vs/Vp = Ns/Np = Ip/Is.
  • Losses: coil heating, eddy currents (laminated core), magnetising losses and flux leakage.
  • High-voltage transmission: same power at a higher pd needs less current, and the cable loss I²R falls with the square of the current.

Mission 4

  • In a uniform field F = qE (positive charges along E, negative against it), so a = qE/m is constant; light particles accelerate most.

Mission 5

  • F = Bqv for v ⟂ B.
  • The force is ⟂ to v, so speed and kinetic energy never change.

Mission 6

  • Electric fields give charged particles energy; magnetic fields bend them in circles of radius set by momentum.
  • Synchrotron: fixed radius, so B rises as the momentum rises.
  • Near the speed of light, extra energy increases the relativistic mass, not the speed.

Mission 7

  • Every particle has an antiparticle with the same mass (and rest energy) and the opposite charge.
  • Pairs to know: e⁻/e⁺, p/p̄, n/n̄, ν/ν̄; a bar marks the antiparticle.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Fields, Capacitors and Particle Physics (part 3) for CCEA A-level Physics. 🎉

  1. Mission 1Move a metal rod or spin a coil near a magnet, and a voltage appears. What decides how big it is?
  2. Mission 2An oscilloscope draws a voltage wave. How do you read its size and its frequency off the screen?
  3. Mission 3A transformer changes the voltage of a supply with no moving parts. How does it do it?
  4. Mission 4An electron and a proton feel the same force between charged plates. Which swerves more, and by how much?
  5. Mission 5A magnetic field can steer a beam of charged particles. Can it also make them go faster?
  6. Mission 6Why are the most powerful particle accelerators built as rings many kilometres around?
  7. Mission 7Antimatter is real. How could you tell an antiparticle from its ordinary twin?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to A-Level Physics · CCEA