← A-Level Physics · AQA · A-Level Physics revision
⭐ 0
AQA A-level Physics (7408) · 3.8 Nuclear physics (part 2)
Mini-Lesson

Nuclear physics (part 2)

4 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1A helium nucleus is lighter than the protons and neutrons that make it. Where did the missing mass go?
  2. Mission 2Splitting a uranium nucleus gives out energy. How can breaking something apart release energy?
  3. Mission 3A neutron bounces off nuclei like a snooker ball. Which nuclei would slow it down fastest?
  4. Mission 4Joining nuclei releases energy, and so does splitting them. How can both be true?
Mission 1

Mission 1: A helium nucleus is lighter than the protons and neutrons that make it. Where did the missing mass go?

Make a guess: A helium nucleus is lighter than the protons and neutrons that make it. Where did the missing mass go?

Mission 1

Mass is a form of energy

Mass and energy balanceenergy out2 protons +2 neutrons, aparthelium-4nucleusThe nucleus has 0.0304 u less mass:equivalent to 28.3 MeV, carried awayNot to scale: the real difference is less than1% of the mass.
  • E = mc²: every mass m has a rest energy mc².
  • c² is huge: 1 kg ↔ 9.0 × 10¹⁶ J.
  • Every energy change changes mass, chemical ones too; there Δm is far too small to measure.
  • Nuclear reactions: Δm is big enough to measure. The energy released leaves as kinetic energy of the products and as photons.
Mission 1

Units for tiny masses

  • Atomic mass unit: 1 u = 1/12 of the mass of a carbon-12 atom.
  • 1 u = 1.661 × 10⁻²⁷ kg.
  • 1 MeV = 1.60 × 10⁻¹³ J.
  • 1 u = 931.5 MeV (the energy equivalent of 1 u).
  • A mass in MeV c⁻²: multiply by c² and you have the energy in MeV. No c needed.
Quick check
?Radium-226 decays by α emission: ²²⁶88Ra → ²²²86Rn + ⁴2α. The atomic masses are 226.025410 u for radium-226, 222.017578 u for radon-222 and 4.002603 u for helium-4 (the electron masses cancel). Take 1 u = 1.661 × 10⁻²⁷ kg = 931.5 MeV c⁻², 1 eV = 1.60 × 10⁻¹⁹ J and c = 3.00 × 10⁸ m s⁻¹. How much energy is released in the decay of one radium-226 nucleus?
Quick check
?Predict first. Which statement correctly describes the binding energy of a nucleus?
Mission 1

Missing mass and binding energy

Building and breaking a nucleusnucleons apartnucleusformed:energyreleasedseparated:energysuppliedseparate nucleonsmore massnucleus: less massbindingenergy= Δm c2energyHelium-4: binding energy 28.3 MeV.
  • A nucleus has less mass than its separate protons and neutrons.
  • Mass defect: Δm = (total mass of separate nucleons) − (mass of nucleus).
  • Binding energy = Δm c²: the energy needed to separate the nucleus completely into its nucleons.
  • The same energy was released when the nucleus formed. That is where the "missing" mass went.
  • Binding energy is not stored in the nucleus. More binding = less mass.
Mission 1

Worked example: helium-4

  • Data: mp = 1.007276 u, mn = 1.008665 u, helium-4 nucleus 4.001506 u.
  • Nucleons: 2(1.007276) + 2(1.008665) = 4.031882 u.
  • Δm = 4.031882 − 4.001506 = 0.030376 u.
  • Binding energy = 0.030376 × 931.5 = 28.30 MeV.
  • Per nucleon: 28.30 ÷ 4 = 7.07 MeV.
  • Use nuclear masses (or atomic masses on both sides, so the electrons cancel).
Mission 1

The binding energy per nucleon curve

Binding energy per nucleon0123456789050100150200250Binding energy per nucleon / MeVNucleon number A2H 1.14He 7.112C 7.756Fe 8.8238U 7.6peak: A ≈ 56–62fusionfissionData: AME2020 atomic mass evaluation (mosttightly bound nuclide at each A).
  • Binding energy per nucleon = binding energy ÷ nucleon number A. Higher = more tightly bound = more stable.
  • Rises steeply for light nuclei (²H: 1.1 MeV), with a spike at ⁴He (7.1 MeV).
  • Peak near A ≈ 56–62 (iron, nickel): about 8.8 MeV.
  • Falls slowly for heavy nuclei: ²³⁸U about 7.6 MeV.
  • Energy is released when the products have more total binding energy than the reactants:
  • Fusion: light nuclei (left of the peak) join.
  • Fission: heavy nuclei (right of the peak) split.
  • Energy released = (total binding energy after) − (total binding energy before). Total = A × (per nucleon value).
Quick check
?Approximate binding energies per nucleon are: ²³⁶92U 7.59 MeV; ⁹²36Kr 8.51 MeV; ¹⁴¹56Ba 8.33 MeV. A ²³⁶92U nucleus splits into a ⁹²36Kr nucleus, a ¹⁴¹56Ba nucleus and three free neutrons. What is the energy change?
Mission check

?In a fusion reaction, a helium-3 nucleus and a deuterium nucleus fuse: ³2He + ²1H → ⁴2He + ¹1H. The atomic masses are ³He: 3.016029 u, ²H: 2.014102 u, ⁴He: 4.002603 u and ¹H: 1.007825 u (the electron masses on the two sides cancel). How much energy is released in one reaction? Use 1 u = 1.661 × 10⁻²⁷ kg and c = 3.00 × 10⁸ m s⁻¹.
Mission 2

Mission 2: Splitting a uranium nucleus gives out energy. How can breaking something apart release energy?

Make a guess: Splitting a uranium nucleus gives out energy. How can breaking something apart release energy?

Mission 2

Nuclear fission

Induced fissionneutronuranium-235uranium-236(unstable,wobbles)barium-141krypton-923 neutronsnucleons: 235 + 1 = 141 + 92 + 3Not to scale.
  • Fission: a heavy nucleus splits into two smaller nuclei of comparable mass, plus a few neutrons (2 or 3 for uranium-235).
  • Spontaneous fission: no trigger (e.g. californium-252). Rare for most nuclei.
  • Induced fission: the nucleus absorbs a neutron first.
  • ²³⁵92U + ¹0n → ²³⁶92U → ¹⁴¹56Ba + ⁹²36Kr + 3 ¹0n
  • In a reactor the neutron is a slow, thermal neutron.
  • Balance it: nucleon numbers 235 + 1 = 141 + 92 + 3(1) = 236; proton numbers 92 = 56 + 36.
Quick check
?Some very heavy nuclides, such as californium-252, can undergo spontaneous fission, whereas uranium-235 in a reactor undergoes neutron-induced fission. Which statement about spontaneous fission is correct?
Mission 2

Where the energy comes from

Up the curve66.577.588.59050100150200250Binding energy per nucleon / MeVNucleon number Auranium-236:about 7.6 MeVfragments: about 8.5 MeV(krypton-92, barium-141)Vertical axis starts at 6 MeV. Data: AME2020atomic mass evaluation.
  • Heavy nuclei sit right of the peak on the binding energy per nucleon curve: about 7.6 MeV.
  • The fragments sit nearer the peak: about 8.5 MeV. More tightly bound.
  • More binding → less total mass → the mass difference is released: E = Δmc².
  • About 200 MeV per fission, mostly as kinetic energy of the fragments; the rest as neutrons, γ photons and later decays.
Mission 2

Worked example: energy from one fission

  • ²³⁵U + n → ¹⁴¹Ba + ⁹²Kr + 3n. Masses (u): ²³⁵U 235.043928; ¹⁴¹Ba 140.914403; ⁹²Kr 91.926173; n 1.008665.
  • Before: 235.043928 + 1.008665 = 236.052593 u.
  • After: 140.914403 + 91.926173 + 3(1.008665) = 235.866571 u.
  • Δm = 0.186022 u → × 931.5 = 173 MeV (2.77 × 10⁻¹¹ J).
  • Count the neutrons on both sides. Atomic masses: electrons cancel.
  • 1 kg of uranium-235 (if every nucleus split, at about 200 MeV each): about 8 × 10¹³ J.
Quick check
?A uranium-235 nucleus absorbs a neutron and splits into two fragments and 2 free neutrons. The fragments contain 234 nucleons in total. The binding energy per nucleon is 7.6 MeV for uranium-235 and about 8.5 MeV for the fragments. A free neutron has no binding energy. Roughly how much energy is released?
Mission 2

Chain reaction and critical mass

Chain reactionsMore than one: rate growshere each fission causes 2 more1 → 2 → 4 …Exactly one: steady rateone neutron per fission causes another1 → 1 → 1 …Less than one: chain dies awayits neutrons are all lost1 → 1 → 0fissioncauses fissionlost
  • Each fission releases 2–3 neutrons. Each can cause another fission: a chain reaction.
  • On average more than one neutron per fission causes fission: rate grows (a bomb).
  • Exactly one: steady rate (a reactor).
  • Less than one: the chain dies away.
  • Neutrons are lost through the surface. A small lump loses too many.
  • Critical mass: the minimum mass of fuel that sustains a chain reaction.
Quick check
?In a reactor core, each fission of uranium-235 releases 2.5 neutrons on average. Of these, on average 0.7 escape from the core and 0.8 are absorbed by the control rods and other materials without causing fission. What happens to the rate of fission?
Quick check
?Predict first. In a gas-cooled reactor, the uranium fuel rods sit in channels through a large block of graphite, which is the moderator. Carbon dioxide gas carries thermal energy from the core. What is the role of the graphite?
Mission 2

Inside a thermal reactor

Thermal reactorwaterheatexchangersteamturbine,generatorcoolantcontrol rods (move in and out)fuel rodsmoderatorconcrete and steel shieldSchematic, not to scale.
  • Fuel rods: uranium enriched in uranium-235.
  • Moderator (water, graphite): slows fast neutrons by collisions. Slow (thermal) neutrons are far more likely to cause fission of uranium-235.
  • Control rods (boron, cadmium): absorb neutrons. Push in → fewer fissions → less power.
  • Coolant (water, carbon dioxide gas): carries thermal energy out of the core.
  • Heat exchanger: the coolant heats a separate water circuit; its steam drives the turbine.
  • Shielding: thick steel and concrete absorb neutrons and γ rays from the core.
Mission 2

Fission products and waste

Spent fuel time line110102103104105106time after removal / years (log scale)cooling ponddry storagedeep undergroundcaesium-137,strontium-90:half-life ≈ 30 yearstechnetium-99:half-life 2.1 × 105 yearsSpent fuel: where it goes, how long it lastsStage lengths are indicative and vary betweencountries.
  • Fragments are neutron-rich: they decay by β⁻ (and γ), often in long chains.
  • Spent fuel is intensely radioactive and hot: its decays keep releasing energy.
  • Half-lives range from seconds to hundreds of thousands of years (e.g. technetium-99: 2.1 × 10⁵ years).
  • Spent fuel cools in water ponds for years, then goes to dry storage.
  • Long-term plan: seal it in stable form and bury it deep underground in stable rock.
  • Risks to manage: leaks into groundwater, heat, and keeping records and security over thousands of years.
Quick check
?High-level waste from a reactor contains caesium-137, a fission product with a half-life of 30 years. The waste is kept in a store for 90 years. What percentage of the initial caesium-137 activity remains at the end of this time?
Mission check

?Plutonium-240 nuclei can split on their own into two fragments and two free neutrons. In one such split, the total binding energy rises from about 1810 MeV (the plutonium nucleus) to about 2010 MeV (the two fragments). How much energy is released, and why?
Mission 3

Mission 3: A neutron bounces off nuclei like a snooker ball. Which nuclei would slow it down fastest?

Make a guess: A neutron bounces off nuclei like a snooker ball. Which nuclei would slow it down fastest?

Mission 3

Moderation: neutron snooker

Neutron snookerHead-on, elastic. Velocity arrows to scale.Lead-208beforeafterbarely moveskeeps 0.98 of its KECarbon-12beforeafterkeeps 0.72 of its KEHydrogen-1 (a proton)beforeafterstopskeeps 0 of its KEFraction of kinetic energy the neutron keepsLead-2080.98Carbon-120.72Hydrogen-10Neutron velocity after = (m − M)/(m + M) ×velocity before.
  • Fission makes fast neutrons (about 2 MeV). Uranium-235 captures slow (thermal) ones far more readily.
  • The moderator slows them by elastic collisions: kinetic energy is passed on to its nuclei.
  • Neutron hits a heavy nucleus: it bounces back at almost the same speed. Little energy lost.
  • Neutron hits a nucleus of similar mass: it can pass on almost all its kinetic energy.
  • So the best moderators have light nuclei: hydrogen, deuterium, carbon.
Mission 3

Worked example: a head-on collision

  • Neutron (mass m) hits a stationary nucleus (mass M) head-on, elastically.
  • Momentum and kinetic energy both conserved → neutron's velocity after = (m − M)/(m + M) × velocity before.
  • Carbon-12: (1 − 12)/(1 + 12) = −11/13. Kinetic energy kept: (11/13)² = 0.72.
  • A 2.0 MeV neutron keeps 0.72 × 2.0 = 1.4 MeV after one head-on hit.
  • Hydrogen-1: keeps 0. Lead-208: keeps 0.98.
  • To reach thermal energies (about 0.025 eV) in carbon: at least 55 collisions, even if every hit were head-on.
Quick check
?A fast neutron makes a head-on elastic collision with a stationary deuterium nucleus, of twice the neutron's mass. What fraction of its kinetic energy does the neutron keep?
Quick check
?A reactor is running at a steady power. The operators want to raise its power output slightly and then hold it at the new level. What should they do with the control rods?
Mission 3

Choosing the materials

  • Moderator: light nuclei; must absorb few neutrons. Water, heavy water, graphite.
  • Control rods: absorb neutrons strongly; keep their shape when hot. Boron, cadmium.
  • Coolant: a fluid with high specific heat capacity; absorbs few neutrons; does not corrode the core. Water, carbon dioxide gas; liquid sodium in fast reactors.
  • In a pressurised water reactor, the water is both moderator and coolant.
  • Ordinary water absorbs some neutrons, so its fuel must be enriched in uranium-235.
Mission 3

Safety by design

Reactor shut-downNormal runningcontrol rods raisedcoolant pumped roundfissionheats the fuelEmergency shut-downrods drop fully incoolant pumped roundcooling continues:decay heatfuel rods (clad)control rodsthick concrete shieldsteel vessel, coolant
  • Fuel: uranium enriched to a few per cent uranium-235, as pellets sealed in metal cladding.
  • Shielding: steel pressure vessel inside thick concrete: absorbs neutrons and γ rays.
  • Remote handling: spent fuel is moved by machines, behind shielding or under water. Nobody gets close.
  • Emergency shut-down: control rods drop fully in, automatically, within seconds.
  • Fission stops, but fission products keep decaying: cooling must continue after shut-down.
Mission 3

Radioactive waste

Radioactive waste routesHigh-level wasteExampleSpent fuel, fission products.Very active and hot.TreatmentCooled in ponds for years; maybe vitrified (sealed in glass)in steel canisters.DestinationDeep geological disposal.Intermediate-level wasteExampleFuel cladding, reactor parts.TreatmentSet in concrete in steel drums.DestinationStored.Low-level wasteExampleGloves, clothing, tools.TreatmentCompacted and sealed.DestinationBuried near the surface.Handling matches activity:high-level only by remote handling behindshielding; low-level by hand with simpleprecautions.
  • High-level: spent fuel, fission products. Very active and hot. Cooled in ponds for years; may be vitrified (sealed in glass) in steel canisters; then deep geological disposal.
  • Intermediate-level: fuel cladding, reactor parts. Set in concrete in steel drums; stored.
  • Low-level: gloves, clothing, tools. Compacted, sealed, buried near the surface.
  • Handling matches activity: high-level only by remote handling behind shielding; low-level by hand with simple precautions.
Quick check
?Two radioactive isotopes in spent fuel start with the same activity. Isotope P has a half-life of 30 years; isotope Q has a half-life of 24 000 years. Which statement about storing them is correct?
Mission 3

Weighing nuclear power

  • Benefits: very low life-cycle CO2 (similar to wind); steady output in any weather; tiny fuel mass; fuel is easy to stockpile (years of supply in a small volume).
  • Risks: rare but severe accidents (Chernobyl 1986, Fukushima 2011); waste that stays dangerous for millennia.
  • Economic: high cost and long build times; costly decommissioning; uranium is finite.
  • Physics supplies the evidence (energy per kg, emissions, risk data). Society weighs it to decide.
Mission check

?Graphite (carbon-12) and beryllium-9 are both used as moderators. A fast neutron makes one head-on elastic collision with a stationary nucleus of each. Which moderator slows neutrons faster, and what fraction of its kinetic energy does the neutron keep in each collision?
Mission 4

Mission 4: Joining nuclei releases energy, and so does splitting them. How can both be true?

Make a guess: Joining nuclei releases energy, and so does splitting them. How can both be true?

Mission 4

Nuclear fusion

Fusion and fission both climb the curvebinding energy per nucleon (MeV)0246810050100150200250nucleon number A2H 1.13H 2.84He 7.156Fe 8.8: peak235U 7.6fusionfissionfragmentsSource: AME2020 atomic mass evaluation (mosttightly bound nucleus at each A).
  • Fusion: two light nuclei join to form a heavier nucleus, often with a spare particle.
  • ²1H + ³1H → ⁴2He + ¹0n + energy
  • Light nuclei sit on the steep left side of the binding energy per nucleon curve. Heavy nuclei sit on the gentle right side.
  • Fusion (from the left) and fission (from the right) both move nuclei towards the peak near iron: more tightly bound.
  • More binding → less total mass → energy released (E = Δmc²).
Quick check
?In the fusion reaction ²1H + ³1H → ⁴2He + ¹0n, the binding energies per nucleon are 1.11 MeV for ²1H, 2.83 MeV for ³1H and 7.07 MeV for ⁴2He. A free neutron has no binding energy. How much energy is released in one reaction?
Mission 4

Worked example: deuterium–deuterium fusion

  • Per nucleon, D–T fusion gives more: 17.6 MeV ÷ 5 = 3.5 MeV, against about 0.85 MeV for uranium fission.
  • ²1H + ²1H → ³2He + ¹0n. Atomic masses (u): ²H 2.014102; ³He 3.016029; n 1.008665.
  • Before: 2 × 2.014102 = 4.028204 u.
  • After: 3.016029 + 1.008665 = 4.024694 u.
  • Δm = 0.003510 u → × 931.5 = 3.27 MeV.
  • Electrons: 2 on each side, so atomic masses are fine.
Quick check
?One reaction in the Sun's core is ³He + ³He → ⁴He + 2 ¹H. The atomic masses are 3.016029 u for helium-3, 4.002603 u for helium-4 and 1.007825 u for hydrogen-1 (the electron masses balance). Take 1 u = 1.661 × 10⁻²⁷ kg and c = 3.00 × 10⁸ m s⁻¹. How much energy is released in one reaction?
Mission check

?Approximate binding energies per nucleon are: ²1H 1.1 MeV; ⁴2He 7.1 MeV; ²⁰10Ne 8.0 MeV; ²⁸13Al 8.3 MeV; ⁴⁰20Ca 8.6 MeV; ⁵⁶26Fe 8.8 MeV; ⁹²36Kr 8.5 MeV; ¹⁴⁴56Ba 8.3 MeV; ²³⁶92U 7.6 MeV. Which pair of processes would both release energy?
Recap

The big ideas

Mission 1

  • Every energy change changes mass: E = mc². Nuclear reactions release energy because the products have less mass.
  • Binding energy = mass defect × c², the energy needed to separate a nucleus into its nucleons; more binding means less mass.
  • Binding energy per nucleon peaks near iron: fusing light nuclei and splitting heavy nuclei both release energy.

Mission 2

  • Fission: a heavy nucleus splits into two smaller nuclei plus neutrons; spontaneous or neutron-induced.
  • Energy is released because the fragments are more tightly bound: less total mass, E = Δmc², about 200 MeV per fission.
  • A steady chain reaction needs, on average, one neutron per fission to cause another; moderator slows neutrons, control rods absorb them, coolant carries energy away, shielding absorbs neutrons and γ.
  • Fission products are β⁻-emitting, hot and long-lived: cooled for years, then stored deep underground.

Mission 3

  • Moderators use light nuclei: neutrons lose most kinetic energy in elastic collisions with nuclei of similar mass.
  • Head-on elastic collision: neutron keeps a fraction ((M − m)/(M + m))² of its kinetic energy.
  • Safety: shielding, remote handling, automatic shut-down by control rods, continued cooling for decay heat.
  • Waste: high-, intermediate- and low-level, each stored to match its activity and heat.
  • The risks and benefits of nuclear power are weighed by society using the evidence.

Mission 4

  • Fusion: light nuclei join; the products are more tightly bound, so their total mass is less and energy is released.
  • Fusion (light nuclei) and fission (heavy nuclei) both move towards the peak of the binding energy per nucleon curve near iron.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Nuclear physics (part 2) for AQA A-level Physics. 🎉

  1. Mission 1A helium nucleus is lighter than the protons and neutrons that make it. Where did the missing mass go?
  2. Mission 2Splitting a uranium nucleus gives out energy. How can breaking something apart release energy?
  3. Mission 3A neutron bounces off nuclei like a snooker ball. Which nuclei would slow it down fastest?
  4. Mission 4Joining nuclei releases energy, and so does splitting them. How can both be true?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to A-Level Physics · AQA