← A-Level Physics · AQA · A-Level Physics revision
⭐ 0
AQA A-level Physics (7408) · 3.4 Mechanics and materials (part 3)
Mini-Lesson

Mechanics and materials (part 3)

7 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1When a truck hits a small car, which one feels the bigger force?
  2. Mission 2A cannon fires a ball forwards. Why does the cannon roll backwards, and more slowly than the ball?
  3. Mission 3Why can a stunt performer walk away from a fall onto an airbag that would kill on concrete?
  4. Mission 4Hold a heavy bag still for ten minutes and your arms ache. How much work have you done on the bag?
  5. Mission 5Two smooth slides drop the same height: one steep, one gentle. Which gives you more speed at the bottom?
  6. Mission 6Identical twins climb the same stairs, one running, one walking. Who does more work? Who is more powerful?
  7. Mission 7Double a car's speed. How much longer is its braking distance?
Mission 1

Mission 1: When a truck hits a small car, which one feels the bigger force?

Make a guess: When a truck hits a small car, which one feels the bigger force?

Mission 1

Forces come in pairs

An interaction pairABforce on B by Aforce on A by BEqual size, opposite direction, on differentbodies.
  • If body A exerts a force on body B, then B exerts a force on A that is equal in size and opposite in direction.
  • The two forces in a pair are always:
    • the same type (both gravitational, both contact, …)
    • on different bodies
    • along the same line, at the same time.
Quick check
Student's diagram of two blocks on a level surface. A large block labelled L sits on the left and touches a smaller blocLSFS on LFL on S
?A hand pushes block L to the right, and L pushes a smaller block S ahead of it. Both blocks speed up to the right along a level surface with negligible friction. The diagram shows a student's representation of the forces that L and S exert on each other: FL on S is the force exerted on S by L, and FS on L is the force exerted on L by S. Which statement about the student's diagram is correct?
Mission 1

Finding the partner

Book, table and EarthEarthTwo pairs:gravitational (red): on book by Earth,on Earth by bookcontact (blue): on bookby table, on table bybookNot to scale. Dashed: the partner forces, ontable and Earth.Book alonenormal forceweightbalance,not a pair(equal: atrest)
  • Name the force: "on X by Y". Its partner is "on Y by X".
  • Book on a table. Weight = force on book by Earth → partner: force on Earth by book, upwards.
  • Normal force on book by table → partner: push on table by book, downwards.
  • Weight and normal force on the book are not a pair: both act on the book, and they are different types.
Quick check
?A lamp hangs at rest from a cord fixed to the ceiling. The cord exerts an upward force on the lamp. Which force forms a Newton's third law pair with this force?
Quick check
?A horse pulls a cart along a level road, and both speed up from rest. A student argues: "The cart pulls back on the horse with a force equal in magnitude to the horse's pull on the cart, so these forces cancel and the cart cannot speed up." Which statement correctly identifies the flaw in the argument?
Mission 1

Pairs never cancel

Horse and trolleytrolleyhorseOn the trolleypull by horsefrictionOn the horsepush by groundpull by trolleyRed: the pair (equal). On each: forward >backwards, so both speed up.
  • The two forces act on different bodies, so they never add to zero on either one.
  • Horse pulls cart; cart pulls back on horse, equally. The cart still speeds up:
    • on the cart: horse's pull > friction on the cart.
    • on the horse: ground's forward push on its hooves > cart's pull back.
  • Equal forces, different masses → different accelerations (a = F/m).
Quick check
?A steel paper clip lies at rest on a wooden table. A magnet held near it pulls it with a small force, but friction from the table stops it moving. Which force forms a Newton's third law pair with the magnet's pull on the clip?
Mission check

Graph of force F (N) on the vertical axis against time t (s) on the horizontal axis, with F = 0 along the time axis. TheF / Nt / s120−120.10on trolley 2on trolley 1
?Trolley 1 rolls along a level track and collides with trolley 2. Trolley 1 has three times the mass of trolley 2. Force sensors record the force exerted on trolley 1 by trolley 2 and the force exerted on trolley 2 by trolley 1; the graph shows the data, with the direction of trolley 1's initial motion as positive. Friction is negligible. How does the change in velocity of trolley 2 during the collision compare with that of trolley 1?
Mission 2

Mission 2: A cannon fires a ball forwards. Why does the cannon roll backwards, and more slowly than the ball?

Make a guess: A cannon fires a ball forwards. Why does the cannon roll backwards, and more slowly than the ball?

Mission 2

Momentum

Momentum is a vectorpositiveBefore+5.0 m s⁻¹initial p = +1.0After−5.0 m s⁻¹final p = −1.0Changefinal−initialΔp = −2.0Δp = final p − initial pMass 0.20 kg; momentum in kg m s⁻¹.Same speed, but the momentum changes.
  • Momentum p = mv: mass × velocity.
  • Unit: kg m s⁻¹ (the same as N s).
  • A vector: same direction as the velocity. Choose a positive direction; the other way is negative.
  • A 0.20 kg ball hits a wall at 5.0 m s⁻¹ and bounces straight back at 5.0 m s⁻¹. Its momentum changes, from +1.0 to −1.0 kg m s⁻¹, though its speed does not.
Quick check
?A cricket ball of mass m moving horizontally with speed v is struck by a bat. It leaves the bat moving horizontally with speed 3v/2 in the opposite direction. Taking the ball's initial direction of motion as positive, what is the change in the ball's momentum?
Mission 2

Conservation of momentum

Equal and opposite pushesABB pushes AA pushes BEqual and opposite forces, for the same time.MomentumbeforeABtotalafterABtotaltotal unchangedBars to scale, arbitrary momentum units.
  • The total momentum of a system stays constant unless a resultant external force acts on it.
  • Why: in a collision, A pushes B and B pushes A with equal and opposite forces (Newton's third law), for the same time.
  • So A's change in momentum is equal and opposite to B's. The total does not change.
  • Total momentum before = total momentum after. Add the momenta with signs.
Mission 2

Worked example: a collision

A sticking collisionBefore1.5 kg0.50 kg4.0 m s⁻¹at restAfter: stuck together1.5 kg0.50 kg3.0 m s⁻¹p = 6.0 kg m s⁻¹ before and afterVelocity arrows to scale.
  • Glider A, 1.5 kg, moves at 4.0 m s⁻¹ along an air track into glider B, 0.50 kg, at rest. They stick together.
  • Before: p = 1.5 × 4.0 + 0.50 × 0 = 6.0 kg m s⁻¹.
  • After: (1.5 + 0.50) × v = 2.0v.
  • 2.0v = 6.0, so v = 3.0 m s⁻¹, in A's original direction.
Mission 2

Explosions

An explosion from restBefore: at rest, spring compressed2.0 kg3.0 kgtotal p = 0After2.0 kg3.0 kg1.8 m s⁻¹1.2 m s⁻¹momentum3.6 kg m s⁻¹3.6 kg m s⁻¹Equal and opposite: total p still 0.Velocity and momentum arrows to scale.
  • Everything starts at rest: total momentum = 0. So it is still 0 afterwards.
  • Two pieces: they move off in opposite directions, with equal and opposite momenta.
  • 2.0 kg and 3.0 kg blocks pushed apart by a spring. The 3.0 kg block moves at 1.2 m s⁻¹.
  • 2.0 × v = 3.0 × 1.2 = 3.6, so v = 1.8 m s⁻¹ the other way. Lighter piece: faster.
  • Kinetic energy increases (0 → 5.4 J): it comes from energy stored in the compressed spring (or in the explosive, for a cannon).
Quick check
?Two blocks, of masses 1.0 kg and 4.0 kg, are held at rest on a horizontal surface with negligible friction, with a compressed spring between them. When they are released, the 1.0 kg block moves off at 2.0 m s⁻¹. Which statement about the 4.0 kg block is correct?
Mission 2

Elastic or inelastic?

Types of collisionafter ÷ beforeelasticpEkinelasticpEkperfectlyinelasticpEk= beforeMomentum: always conserved.Kinetic energy: only in an elastic collision.Bars show after as a fraction of before; theinelastic values are illustrative.
  • Kinetic energy Eₖ = ½mv².
  • Momentum is conserved in every collision (no resultant external force). Kinetic energy is not always.
  • Elastic: total kinetic energy unchanged.
  • Inelastic: total kinetic energy decreases. It becomes internal (thermal) energy, sound, and energy of permanent deformation.
  • Perfectly inelastic: the bodies stick together and share one velocity. Biggest loss of kinetic energy.
  • Total energy is always conserved; only the kinetic part changes.
  • Test it with the glider collision: kinetic energy before = ½ × 1.5 × 4.0² = 12 J; after = ½ × 2.0 × 3.0² = 9.0 J. 3.0 J transformed into other forms: inelastic.
Quick check
?A 0.50 kg trolley moving at 5.0 m s⁻¹ collides with a 3.0 kg trolley at rest on a level track with negligible friction. After the collision, the 0.50 kg trolley moves backwards at 1.0 m s⁻¹ and the 3.0 kg trolley moves forwards at 1.0 m s⁻¹. How much of the system's kinetic energy is transformed into other forms of energy?
Mission check

?A person of mass 60 kg stands in a rowing boat of mass 120 kg. Both are at rest, and water resistance is negligible. The person jumps horizontally from the boat onto a jetty, leaving at 1.0 m s⁻¹. Which statement about the boat immediately afterwards is correct?
Mission 3

Mission 3: Why can a stunt performer walk away from a fall onto an airbag that would kill on concrete?

Make a guess: Why can a stunt performer walk away from a fall onto an airbag that would kill on concrete?

Mission 3

Force is the rate of change of momentum

  • F = Δp/Δt: resultant force = rate of change of momentum.
  • Constant mass: Δp/Δt = mΔv/Δt = ma. F = ma is the special case.
Mission 3

Impulse

Impulse on a rebounding ball+ (away from the wall)Beforeu = −25 m s⁻¹p = −1.5 kg m s⁻¹Afterv = +15 m s⁻¹p = +0.90 kg m s⁻¹Impulse = change in momentump afterimpulsep beforeimpulse (N s): away from the wall,along the force from the wall,not along the incoming velocityArrows to scale.
  • Impulse = FΔt = Δ(mv) (F constant).
  • Unit: N s, the same as kg m s⁻¹.
  • A vector: in the direction of the resultant force, which need not be the direction of motion.
Mission 3

Worked example: a rebound

  • A 0.060 kg ball hits a wall at 25 m s⁻¹ and rebounds at 15 m s⁻¹. Contact time 0.020 s.
  • Take away from the wall as positive.
  • u = −25 m s⁻¹, v = +15 m s⁻¹.
  • Δp = m(v − u) = 0.060 × (15 − (−25)) = 2.4 N s, away from the wall.
  • Average force = 2.4 ÷ 0.020 = 120 N, away from the wall.
  • Trap: 0.060 × (15 − 25) = −0.60 N s. Velocity is a vector; the direction reverses.
Quick check
?A sledge on level snow is pulled horizontally with a constant force of 60.0 N for 4.00 s. Throughout this time it slides forwards and the frictional force on it is 22.0 N. What is the magnitude of the impulse delivered to the sledge by the resultant force during the 4.00 s?
Mission 3

Area under a force–time graph

Area under a force–time graphImpact: force rises and fallsforcetimearea = impulse = ΔpaverageforceΔt (contact time)Dashed rectangle: average force × Δt,the same area as the hump.Force reverses: area below the axisforcetime+−negative impulseTotal impulse = area above − area below
  • Real impacts: the force rises and falls. It is not constant.
  • Impulse = area under the F–t graph = change in momentum.
  • Average force = area ÷ contact time.
  • Area below the time axis = impulse in the negative direction.
Quick check
Three force–time graphs, labelled P, Q and R, drawn side by side on the same scales, with F (N) on the vertical axis (grPQR24680F / Nt / s123412341234
?Each graph shows the resultant force F exerted on a different trolley, P, Q or R, as a function of time t. Which ranking of the magnitudes of the impulses delivered to the trolleys is correct?
Mission 3

Longer contact, smaller force

Two ways to stopforcetime0.012 s0.12 sHard dashboard: 0.012 s,average force ≈ 82 kNSeat belt and crumple zone:0.12 s, average force ≈ 8.2 kNEqual areas: the same change in momentum.Ten times the time: one tenth of the force.Drawn to scale (illustrative smooth humps).
  • Stopping: the change in momentum is fixed by the mass and the speed.
  • Longer stopping time → smaller average force.
  • A 70 kg occupant stops from 14 m s⁻¹: Δp = 980 N s.
  • Seat belt and crumple zone, 0.12 s: F ≈ 8.2 kN. Hard dashboard, 0.012 s: F ≈ 82 kN.
  • Same idea: airbags, bicycle helmets, packaging foam, bending your knees on landing.
  • Ethical design: protect occupants and pedestrians and other road users, weighed against cost and mass.
Mission check

?Two identical 0.50 kg gliders on an air track each move at 2.0 m s⁻¹ towards an obstacle. Glider 1 hits a steel buffer and bounces straight back at 2.0 m s⁻¹; the contact lasts 0.010 s. Glider 2 hits a foam pad and stops; the contact lasts 0.040 s. How many times larger is the average force on glider 1 than the average force on glider 2?
Mission 4

Mission 4: Hold a heavy bag still for ten minutes and your arms ache. How much work have you done on the bag?

Make a guess: Hold a heavy bag still for ten minutes and your arms ache. How much work have you done on the bag?

Mission 4

Work is energy transferred

One joule of workstartend1 Nmoves 1 m in the directionof the forcework done = 1 N × 1 m = 1 Jenergy transferred = 1 JDrawn to scale along the floor.
  • A force does work when its point of application moves in the direction of the force.
  • Work done = force × distance moved in the direction of the force.
  • Work done = energy transferred. Both in joules.
  • 1 J = the work done when a force of 1 N moves its point of application 1 m in its own direction.
Mission 4

A force at an angle

A force at an angleFF cos θalong the displacement: does workF sin θno workθdisplacement
  • Only the component along the displacement does work.
  • W = Fs cos θ, θ = angle between the force and the displacement.
  • θ = 0: W = Fs. θ = 90°: W = 0. The force changes only the direction of motion.
Quick check
?A child pulls a sledge 25 m along level snow using a rope held at 30° above the horizontal. The tension in the rope is a constant 80 N. How much work does the tension do on the sledge?
Mission 4

Positive, negative or zero

Positive, negative or zero workPushpushdisplacementθ = 0work: +Frictionfrictiondisplacementθ = 180°work: −Level floornormal forcedisplacementθ = 90°work: 0Load held stillyour forcedisplacement = 0work: 0
  • Work is a scalar. Its sign shows which way energy goes.
  • θ < 90°: positive work. The force transfers energy to the object.
  • θ > 90°: negative work. The force takes energy away: friction, braking.
  • θ = 90°: zero. A crate slides along a level floor: its weight and the normal force do no work.
  • No displacement: zero. Holding a load still does no work on it.
Quick check
?A worker uses a rope to lower a box straight down at constant speed. Which statement about the work done on the box during the descent is correct?
Mission 4

Worked example: pushing a crate

  • A 150 N push at 40° below the horizontal moves a crate 6.0 m along a level floor. Friction is 90 N.
  • Push: W = 150 × 6.0 × cos 40° = +690 J.
  • Friction (θ = 180°): W = 90 × 6.0 × cos 180° = −540 J.
  • Weight and normal force (θ = 90°): 0 J each.
  • Each force's work is found separately. Use the angle between that force and the displacement.
Mission 4

A force that varies

Work as the area under a force graphConstant force0FsF × sRising from 00Fs½FsForce reverses0+ work− work (negative)Vertical axes: force F (N)Horizontal axes: displacement s (m)Area units: N m = J
  • Force changes with position: work = area under the force–displacement graph.
  • Constant force: a rectangle, F × s. Force rising steadily from 0: a triangle, ½Fs.
  • Area below the axis counts as negative work.
  • Irregular curve: count squares; multiply by the work one square represents.
Quick check
Graph of force F (N) on the vertical axis against position x (m) on the horizontal axis, with light gridlines every 1 m 840−42.04.06.0F / Nx / m
?A student's hand exerts a horizontal force on a block as the block moves in the +x direction along a level surface. The graph shows the force component F as a function of the block's position x. What is the total work done on the block by the hand's force from x = 0 to x = 6.0 m?
Mission check

?A student carries a bag of weight 15 N up a flight of stairs at constant velocity. The bag moves 4.0 m horizontally and rises 3.0 m, so it travels 5.0 m along the stairs. How much work does the student's upward force do on the bag?
Mission 5

Mission 5: Two smooth slides drop the same height: one steep, one gentle. Which gives you more speed at the bottom?

Make a guess: Two smooth slides drop the same height: one steep, one gentle. Which gives you more speed at the bottom?

Mission 5

Kinetic energy

  • Kinetic energy: the energy an object has because it is moving.
  • Eₖ = ½mv²
  • A scalar: never negative; no direction.
  • Double the mass → double the kinetic energy. Double the speed → four times the kinetic energy.
Mission 5

Gravitational potential energy

  • Gravitational potential energy: energy due to position in a gravitational field.
  • ΔEₚ = mgΔh
  • Valid near the surface, where g is roughly constant.
Quick check
?Object A has mass m and moves at speed 2v. Object B has mass 2m and moves at speed v. What is the kinetic energy of object A divided by the kinetic energy of object B?
Mission 5

Conservation of energy

Energy stores of a falling ballTop, at restgravitational PEkineticinternaltotalBottom, no draggravitational PEkineticinternaltotalBottom, with draggravitational PEkineticinternaltotalsame totalBars to scale; the drag split is illustrative.
  • Energy cannot be created or destroyed.
  • It is transferred between stores.
  • Stores include kinetic, gravitational, elastic, internal (thermal), chemical and nuclear.
  • No friction or drag: mechanical energy stays constant. Loss of potential energy = gain of kinetic energy.
  • With friction or drag: some becomes internal energy and sound. The total is still conserved.
  • Loss of GPE = gain of KE + work done against resistive forces.
Mission 5

Worked example: a falling ball

  • A ball is dropped from 1.8 m. Air resistance is negligible.
  • Loss of GPE = gain of KE: mgh = ½mv². m cancels: v = √(2gh).
  • v = √(2 × 9.81 × 1.8) = 5.9 m s⁻¹.
  • Only the vertical drop matters. A smooth slide of any shape, same drop: the same speed.
Quick check
?A child slides from rest down a straight slide with negligible friction and reaches a speed v at the bottom. A second straight slide has the same steepness, but its top is four times as high above its bottom. What speed does the child reach at the bottom of the second slide?
Mission check

?Three identical stones are thrown from the top of a sea cliff with the same speed: one straight up, one horizontally and one straight down. Air resistance is negligible. Which stone hits the sea with the greatest speed?
Mission 6

Mission 6: Identical twins climb the same stairs, one running, one walking. Who does more work? Who is more powerful?

Make a guess: Identical twins climb the same stairs, one running, one walking. Who does more work? Who is more powerful?

Mission 6

Power

Same work, different powerRunning4.0 sWalking8.0 sworkworkpowerpowerBars to scale: work equal, power 2 : 1.
  • Power = rate of doing work = rate of energy transfer.
  • P = ΔW/Δt
  • Unit: the watt. 1 W = 1 J s⁻¹.
  • Same work in half the time: twice the power.
Mission 6

Worked example: climbing stairs

  • A 60 kg student climbs stairs 3.0 m high in 4.0 s.
  • Work done = mgΔh = 60 × 9.81 × 3.0 = 1.8 kJ (1766 J).
  • Power = 1766 ÷ 4.0 = 440 W.
  • Walk up in 8.0 s: the same work, half the power.
Mission 6

Power and speed: P = Fv

Power and speeddriving600 Nresistive600 Nv = 30 m s⁻¹Constant velocity: forces balance.P = Fv = 600 × 30 = 18 kW
  • A force F moves its point of application Δs in time Δt: W = FΔs.
  • P = W/Δt = F × Δs/Δt = Fv.
  • Car at a steady 30 m s⁻¹: driving force = resistive forces = 600 N.
  • Power needed = 600 × 30 = 18 kW.
Quick check
?A cyclist rides along a level road at a constant speed of 8.0 m s⁻¹. The total resistive force on the cyclist and bicycle is 25 N. What power does the cyclist's driving force develop?
Mission 6

Efficiency

Efficiencyinput200 Wuseful 118 Wwasted 82 W(thermal energy)efficiency = 118 ÷ 200 = 0.59 = 59%Widths to scale.
  • Efficiency = useful energy output ÷ total energy input.
  • Or: useful power output ÷ total power input.
  • Multiply by 100 for a percentage.
  • Always less than 100%. The rest is wasted, mostly as thermal energy in the surroundings.
Mission 6

Worked example: a motor

  • An electric motor takes 200 W. It lifts a 20 kg load 3.0 m in 5.0 s.
  • Useful power = mgΔh/t = 20 × 9.81 × 3.0 ÷ 5.0 = 118 W.
  • Efficiency = 118 ÷ 200 = 0.59, or 59%.
  • Wasted power = 200 − 118 = 82 W, mostly heating the motor and its surroundings.
Quick check
?A Sankey diagram for a car engine has an input arrow representing 200 kJ of chemical energy from the fuel. It divides into four output arrows: 60 kJ of useful mechanical work, 100 kJ of thermal energy carried away by the exhaust gases, 30 kJ of thermal energy removed by the cooling system, and 10 kJ of sound. What is the efficiency of the engine?
Mission check

?Motor A raises a 200 N load through 3.0 m in 6.0 s. Motor B raises a 100 N load through 6.0 m in 4.0 s. Both lift at constant speed. Which statement is correct?
Mission 7

Mission 7: Double a car's speed. How much longer is its braking distance?

Make a guess: Double a car's speed. How much longer is its braking distance?

Mission 7

Net work changes kinetic energy

Work–energy theoremFFspeed uspeed vsFs = ½mv² − ½mu²F = resultant force
  • The work done by the resultant force = the change in kinetic energy.
  • From F = ma and v² = u² + 2as: Fs = ½mv² − ½mu².
  • Net work positive: speeds up. Negative: slows down. Zero: constant speed.
Mission 7

Worked example: braking

  • A 1200 kg car at 20 m s⁻¹ brakes with a constant 8000 N resultant force.
  • Final KE = 0, so F × s = ½mu².
  • s = ½ × 1200 × 20² ÷ 8000 = 30 m.
  • At 40 m s⁻¹: s = ½ × 1200 × 40² ÷ 8000 = 120 m.
  • Braking distance ∝ u²: double the speed, four times the distance.
Quick check
?A child on a toboggan slides across level snow. The child and toboggan have a total mass of 50 kg and slow down from 8.0 m s⁻¹ to 6.0 m s⁻¹. What is the magnitude of the net work done on the child–toboggan system during this time?
Mission 7

Friction and drag dissipate energy

Energy flow on a slopeSliding down a slopewith friction and draggravitationalpotential energykinetic energyinternal energy(warm runners, air)Band widths to scale: about 40% of the energyis dissipated.
  • Friction and drag do negative work on a moving object.
  • That mechanical energy becomes internal (thermal) energy and sound. The total is still conserved.
  • Loss of GPE = gain of KE + work done against resistive forces.
Mission 7

Worked example: a toboggan run

  • A 50 kg toboggan and rider start from rest. They descend 12 m vertically along a 40 m slope and reach 12 m s⁻¹.
  • GPE lost = 50 × 9.81 × 12 = 5890 J. KE gained = ½ × 50 × 12² = 3600 J.
  • Work done against resistive forces = 5890 − 3600 ≈ 2.3 kJ. Average resistive force = 2290 ÷ 40 ≈ 57 N.
Quick check
?A skier of mass 60 kg starts from rest at the top of a slope and descends through a vertical height of 20 m. At the bottom her speed is 16 m s⁻¹. Take g = 9.81 m s⁻². What is the total work done on the skier by friction and air resistance during the descent?
Mission check

?A block on a level, frictionless surface is sped up by a constant horizontal force. The work needed to speed the block up from rest to speed v is W. How many times W is needed to speed the block up from v to 3v?
Recap

The big ideas

Mission 1

  • Third-law pair: same type, equal size, opposite direction, on two different bodies; so the pair never cancels.

Mission 2

  • p = mv, a vector. With no resultant external force, total momentum is conserved in every collision and explosion.
  • Elastic: total Eₖ unchanged. Inelastic: total Eₖ decreases. Explosions: Eₖ increases from a stored energy.

Mission 3

  • Impulse = FΔt = Δp: the area under a force–time graph; a longer contact time means a smaller average force.

Mission 4

  • W = Fs cos θ: only the component along the displacement does work; work done = energy transferred.
  • Variable force: work = area under the F–s graph.

Mission 5

  • Eₖ = ½mv²; ΔEₚ = mgΔh. Without resistive forces, PE lost = KE gained: only the height dropped matters.

Mission 6

  • P = W/t = Fv; efficiency = useful output ÷ total input (energy or power).

Mission 7

  • Work done by the resultant force = change in kinetic energy: Fs = ½mv² − ½mu².
  • Friction and drag turn mechanical energy into internal energy; total energy is conserved.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Mechanics and materials (part 3) for AQA A-level Physics. 🎉

  1. Mission 1When a truck hits a small car, which one feels the bigger force?
  2. Mission 2A cannon fires a ball forwards. Why does the cannon roll backwards, and more slowly than the ball?
  3. Mission 3Why can a stunt performer walk away from a fall onto an airbag that would kill on concrete?
  4. Mission 4Hold a heavy bag still for ten minutes and your arms ache. How much work have you done on the bag?
  5. Mission 5Two smooth slides drop the same height: one steep, one gentle. Which gives you more speed at the bottom?
  6. Mission 6Identical twins climb the same stairs, one running, one walking. Who does more work? Who is more powerful?
  7. Mission 7Double a car's speed. How much longer is its braking distance?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to A-Level Physics · AQA