← A-Level Physics · AQA · A-Level Physics revision
⭐ 0
AQA A-level Physics (7408) · 3.4 Mechanics and materials (part 2)
Mini-Lesson

Mechanics and materials (part 2)

7 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1A runner finishes a lap exactly where she started. What was her average velocity?
  2. Mission 2On a velocity–time graph, where is the distance covered hiding?
  3. Mission 3A dropped stone falls a distance d in its first second. How far does it fall in the next second?
  4. Mission 4Fire a bullet horizontally and drop another at the same instant. Which hits the ground first?
  5. Mission 5Push a car and a wheelbarrow equally hard. How much more slowly does the car speed up?
  6. Mission 6Raindrops fall from high clouds. Why don't they hit the ground like bullets?
  7. Mission 7Can friction ever push an object forwards, in the direction it is moving?
Mission 1

Mission 1: A runner finishes a lap exactly where she started. What was her average velocity?

Make a guess: A runner finishes a lap exactly where she started. What was her average velocity?

Mission 1

Position, displacement, distance

Distance and displacement01020304050position / morigin40 m out10 m backDistance (path) = 40 m + 10 m = 50 mstartfinishdisplacement s= +30 m (outward)
  • Position: where it is, measured from an origin along an axis. The sign shows which side.
  • Displacement: the change in position. A vector.
  • Symbol s.
  • Distance: total length of the path. A scalar, never negative.
  • 40 m out, 10 m back: distance 50 m; displacement 30 m outward.
Quick check
?A runner moves along a straight track. Her position x is measured from a marker on the track. She starts at x = +30 m, runs to x = +70 m, then turns around and runs to x = −20 m, where she stops. What is her displacement?
Mission 1

Speed and velocity

One lapstart and finishone lapdistance = lap lengthdisplacement = 0
  • Average speed = total distance ÷ total time. A scalar.
  • Average velocity = displacement ÷ time. A vector, in the direction of the displacement.
  • v = Δs/Δt
  • Unit: m s⁻¹.
Mission 1

Acceleration

Velocity and acceleration directionspositivevelocity vacceleration av +, a +speeding upv +, a −slowing downv −, a −speeding upv −, a +slowing down
  • Acceleration = rate of change of velocity. Unit: m s⁻².
  • a = Δv/Δt
  • Velocity changes if the speed or the direction changes. A ball that bounces straight back at the same speed has accelerated.
  • a in the same direction as v: speeding up. Opposite: slowing down.
  • A negative acceleration does not always mean slowing down.
Quick check
?An object moves along a straight line, with positive taken to the right. At one instant its velocity is −3.0 m s⁻¹ and its acceleration is +2.0 m s⁻². The acceleration stays constant. Which describes the motion of the object?
Mission 1

Average and instantaneous

Light gatetrackglidercard, length Lvlight gatebeam crossesthe tracktimerΔtv ≈ L ÷ Δt
  • Average value: over a time interval.
  • Average velocity and average acceleration use only the initial and final states.
  • Average speed uses the whole path: total distance ÷ total time.
  • Instantaneous value: at one instant.
  • The average over a very short interval approximates the instantaneous value.
  • A speedometer shows instantaneous speed.
  • A card of length L passes a light gate in time Δt: v ≈ L ÷ Δt.
  • Uniform acceleration: velocity changes by the same amount every second. Non-uniform: the acceleration itself changes.
Quick check
Data table with two rows. Row t (s): 2.00, 2.01, 2.10, 3.00. Row x (m): 30.0000, 30.2005, 32.0500, 55.0000, the object'st / s2.002.012.103.00x / m30.000030.200532.050055.0000
?The table shows the position x of an object moving along a straight line at four instants. Which value is the best estimate of the object's instantaneous velocity at t = 2.00 s?
Mission 1

Worked example

  • A cyclist rides 600 m north in 120 s, then 200 m south in 40 s.
  • Distance = 600 + 200 = 800 m. Displacement = 600 − 200 = 400 m north.
  • Time = 160 s.
  • Average speed = 800 ÷ 160 = 5.0 m s⁻¹.
  • Average velocity = 400 ÷ 160 = 2.5 m s⁻¹ north.
  • Both legs are at 5.0 m s⁻¹, but the velocity changes: north, then south.
Mission check

?A car travels 3.0 km along a straight road at a constant speed of 10 m s⁻¹, then returns along the same road to its starting point at a constant speed of 15 m s⁻¹. What are its average speed and its average velocity for the whole journey?
Mission 2

Mission 2: On a velocity–time graph, where is the distance covered hiding?

Make a guess: On a velocity–time graph, where is the distance covered hiding?

Mission 2

Displacement–time graphs

Displacement–time graph shapess / mt / sat restgradient = 0s / mt / sconstant velocitygradient = velocitys / mt / snegative velocitynegative gradients / mt / svelocity changinggradient of tangent
  • Displacement–time (s–t) graph.
  • Gradient = velocity.
  • Straight line: constant velocity. Steeper: faster. Horizontal: at rest.
  • Negative gradient: moving in the negative direction.
  • Curve: velocity changing. Gradient of the tangent = instantaneous velocity.
Quick check
?A displacement–time graph for a body moving along a straight line has three straight sections: from (0, 0) to (3.0 s, 12 m); horizontal from 3.0 s to 5.0 s; then from (5.0 s, 12 m) down to (8.0 s, 0). What is the velocity of the body at t = 6.0 s?
Mission 2

Velocity–time graphs

Areas on a velocity–time graphv / m s⁻¹t / s+5−501342+−v = 0: reversesdisplacement = area above − area belowdistance = area above + area below
  • Gradient = acceleration. Straight line: uniform acceleration. Curve: non-uniform.
  • Area between the line and the time axis = displacement.
  • Area below the axis: negative displacement (moving backwards).
  • Distance = total area, every part counted as positive.
  • Line crosses the time axis: velocity zero, the object reverses.
  • Its acceleration need not be zero.
Mission 2

Worked example

  • A car: 0 to 12 m s⁻¹ in 4.0 s; steady 12 m s⁻¹ for 6.0 s; then to rest in 3.0 s.
  • Accelerations: 12 ÷ 4.0 = 3.0 m s⁻²; 0; −12 ÷ 3.0 = −4.0 m s⁻².
  • Displacement = area: ½ × 4.0 × 12 + 6.0 × 12 + ½ × 3.0 × 12
  • = 24 + 72 + 18 = 114 m.
  • Average velocity = 114 ÷ 13.0 = 8.8 m s⁻¹.
Quick check
?A car starts from rest at t = 0 and s = 0 and moves along a straight road. A graph of its displacement s against time t is a curve that gets steeper with time. At t = 3.0 s, s = 16.5 m, and the tangent to the curve at this point also passes through the point (5.0 s, 40.5 m). What is the instantaneous velocity of the car at t = 3.0 s?
Mission 2

Curved velocity–time graphs

Counting squares and drawing a tangentv / m s⁻¹t / s02462468ΔtΔvArea: count the squares under the curve.1 square = 1 m s⁻¹ × 1 s = 1 mAcceleration at a point = gradient of thetangent = Δv/ΔtIllustrative curve.
  • Area under a curve: count squares. One square = (velocity per square) × (time per square).
  • Count part-squares as halves, or split the area into strips (trapezia).
  • Grid of 1 m s⁻¹ × 1 s squares: 38 squares → about 38 m.
  • Acceleration at a point: draw a long tangent, take its gradient.
Quick check
?A graph of velocity against time for a sprinter starts at the origin, rises steeply, becomes gradually less steep, and is a horizontal line at 11 m s⁻¹ from t = 6.0 s until the end of the race. Which describes the sprinter's motion?
Mission 2

Acceleration–time graphs

Area under an acceleration–time grapha / m s⁻²t / sat₁t₂Δtarea = Δv= a × ΔtUnits: m s⁻² × s = m s⁻¹
  • Area under an a–t graph = change in velocity.
  • Horizontal line: uniform acceleration. Line on the time axis: constant velocity.
  • Final velocity = starting velocity + area. You need the starting velocity.
  • Area below the axis: a negative change in velocity.
Quick check
Acceleration–time graph with a / m s⁻² on the vertical axis and t / s on the horizontal axis. The graph is a horizontal a / m s⁻²t / s05.0158.0
?The graph shows how the acceleration of a dragster moving along a straight track varies with time. The dragster starts from rest at t = 0. What is the velocity of the dragster at t = 15 s?
Mission 2

The bouncing ball

The bouncing ballVelocity–time (upwards positive)vtarea = height fallenarea = height of next risegradient −g(all lines parallel)Displacement–time (height above the ground)stbouncesIllustrative: each rebound speed 0.7 of theimpact speed. Contact time very short.
  • Ball dropped, bounces several times. Take upwards as positive.
  • No air resistance. v–t: straight lines of gradient −g, falling and rising alike.
  • At each bounce, v jumps from negative to a smaller positive value: energy is lost.
  • Lines after each bounce are parallel: same gradient, −g.
  • Area below the axis = height fallen. Area above = height of the next rise.
  • s–t: curved arcs with lower and lower peaks.
Mission check

?A cyclist's velocity–time graph is a straight line from (0, 4.0 m s⁻¹) to (5.0 s, 10 m s⁻¹), then a horizontal line at 10 m s⁻¹ until t = 8.0 s. What is the cyclist's displacement during these 8.0 s?
Mission 3

Mission 3: A dropped stone falls a distance d in its first second. How far does it fall in the next second?

Make a guess: A dropped stone falls a distance d in its first second. How far does it fall in the next second?

Mission 3

Five quantities, one condition

The five quantitiespositive (+)u initial velocityv final velocitya accelerationas displacementt = 0t timeConstant acceleration in the + direction: thevelocity grows, the acceleration stays thesame. Velocity arrows to scale.
  • Use these equations only when the acceleration is constant: same size, same direction, along a straight line.
  • s displacement · u initial velocity · v final velocity · a acceleration · t time.
  • Every quantity except t has a direction along the line: pick a positive direction and give each one a sign.
Mission 3

The equations

  • v = u + at (no s)
  • s = ut + ½at² (no v)
  • v² = u² + 2as (no t)
  • s = ((u + v)/2)t (no a)
  • Choose the equation that leaves out the quantity you neither know nor want.
Mission 3

Worked example

  • A cyclist moving at 4.0 m s⁻¹ accelerates uniformly at 1.5 m s⁻² for 6.0 s. Find the final velocity and the displacement.
  • Known: u = 4.0 m s⁻¹, a = 1.5 m s⁻², t = 6.0 s. Want: v, s.
  • v = u + at = 4.0 + 1.5 × 6.0 = 13 m s⁻¹
  • s = ut + ½at² = 4.0 × 6.0 + ½ × 1.5 × 6.0² = 24 + 27 = 51 m
  • Check with the third equation: 13² = 4.0² + 2 × 1.5 × 51 → 169 = 169 ✓
Quick check
?A car travelling at 16 m s⁻¹ brakes with uniform deceleration and comes to rest in 4.0 s. What distance does the car travel while braking?
Mission 3

Free fall

Ball thrown upwardsv = 0, a = grisingfallingvelocityacceleration gImages at equal time intervals; air resistancenegligible. Velocity arrows to scale.
  • Free fall: gravity is the only force acting (air resistance negligible).
  • Acceleration = g, downwards, the same for every mass.
  • Take g = 9.81 m s⁻².
  • A ball thrown upwards has acceleration g downwards while rising, at the top and while falling.
  • At the top its velocity is zero; its acceleration is not.
Quick check
?A small wheeled vehicle moves up a straight ramp, slowing down at a steady rate. It turns around at its highest point and then speeds up at the same steady rate as it rolls back down. The direction up the ramp is positive. Which description matches the vehicle's velocity–time graph?
Mission 3

Worked example: thrown upwards

  • A ball is thrown straight up at 12.0 m s⁻¹. How high does it rise, and when does it reach the top?
  • Take up as positive: u = +12.0 m s⁻¹, a = −g. At the top, v = 0.
  • Height: 0 = u² − 2gs → s = u²/2g
  • Time: 0 = u − gt → t = u/g
  • s = 12.0² ÷ (2 × 9.81) = 7.34 m · t = 12.0 ÷ 9.81 = 1.22 s
Mission 3

Measuring g: timing a fall

Measuring g: electromagnet and trapdoorApparatuselectromagnetsteel balltrapdoor(opens: timer stops)htimertswitching offthe magnetstarts itGraph (sketch)h / mt² / s²0gradient = g/2straight linethrough theoriginSketch graph only: no measured data.
  • An electromagnet holds a steel ball. Switching it off releases the ball and starts the timer.
  • The ball hits a trapdoor, which stops the timer.
  • Measure the drop height h and the time t. Repeat for 5–6 heights.
  • From rest: h = ½gt². Plot h against t²: a straight line through the origin.
  • Gradient = g/2, so g = 2 × gradient.
Mission 3

Measuring g: light gates

Measuring g: light gateApparatusLcard, releasedfrom restlight gatehdata loggerΔtv = L/Δt at thegateGraph (sketch)v² / m² s⁻²h / m0gradient = 2gstraight linethrough theoriginSketch graph only: no measured data.
  • Drop a card of known length L from rest, a height h above a light gate.
  • The data logger (computer software) times how long the card blocks the beam, Δt.
  • Speed at the gate: v = L/Δt.
  • From rest: v² = 2gh. Plot v² against h: gradient = 2g.
  • Electronic timing removes human reaction time.
Mission 3

Errors in measuring g

  • Delayed release (the magnet holds the ball briefly): every t is too long → g too small. Systematic.
  • h measured to the wrong point of the ball: the same offset in every h → shifts the intercept, not the gradient. g unaffected.
  • Air resistance: g too small. Use a small, dense ball.
  • Random scatter in t: repeat each height and average; the line of best fit averages the rest.
Quick check
?A student drops a ball from rest from several heights h and times each fall, t. She plots t² (y-axis) against h (x-axis): a straight line through the origin with gradient 0.204 s² m⁻¹. What value of g do the results give?
Mission check

?A toy car is released from rest on a straight slope and speeds up with constant acceleration. It travels 0.60 m in the first 2.0 s. How far does it travel between t = 4.0 s and t = 6.0 s?
Mission 4

Mission 4: Fire a bullet horizontally and drop another at the same instant. Which hits the ground first?

Make a guess: Fire a bullet horizontally and drop another at the same instant. Which hits the ground first?

Mission 4

Two motions, one clock

Dropped and launched togetherdroppedlaunched horizontallyggImages at equal time intervals; air resistancenegligible.
  • No air resistance: the only force is weight, straight down.
  • Horizontally: no force → constant velocity.
  • Vertically: acceleration g downwards → free fall.
  • The two motions are independent. They share only the time, t.
Mission 4

Launched horizontally

Horizontal launch0.80 m1.0 m2.5 m s⁻¹horizontal component: constantvertical component: growsvelocityDrawn to scale with g = 9.81 m s⁻². Velocityarrows to scale; points at 0, 0.15 s and0.30 s; lands at 0.40 s.
  • A ball rolls off a table 0.80 m high at 2.5 m s⁻¹. Where does it land?
  • Vertical first: it starts with zero vertical velocity. 0.80 = ½gt².
  • t = √(2 × 0.80 ÷ 9.81) = 0.40 s
  • Then horizontal: x = 2.5 × 0.40 = 1.0 m from the table.
  • Recipe: find t from the vertical motion; use it in the horizontal motion.
Quick check
?A ball is kicked horizontally at 12 m s⁻¹ from the top of a vertical cliff 20 m high and lands on level ground below. Fluid resistance is negligible. Take g = 9.81 m s⁻². How far from the foot of the cliff does the ball land?
Mission 4

Launched at an angle

Angled launchResolve at the startθuux = u cos θuy = u sin θBelow thehorizontaluydownThe path over level grounduxtop: vertical velocity = 0umax heightrangePath drawn to scale for a 35° launch, no airresistance. Velocity arrows to scale.
  • Launch at a given speed and angle θ to the horizontal. Resolve at the start:
  • horizontal ux = u cos θ · vertical uy = u sin θ
  • Horizontal component: never changes.
  • Vertical component: changes by g every second, as in free fall.
  • Below the horizontal: the vertical component starts downwards. Watch the sign.
Mission 4

The top and the landing

  • At the highest point: vertical velocity = 0. Velocity = the horizontal component, not zero.
  • Acceleration at the top: still g downwards.
  • Over level ground (no air resistance): the path is symmetrical. Time up = time down.
  • Range = horizontal velocity × total time of flight.
Mission 4

Worked example: a kicked ball

  • A ball is kicked at 18.0 m s⁻¹, 35.0° above level ground. Find the maximum height and the range.
  • Horizontal: 18.0 cos 35.0° = 14.7 m s⁻¹. Vertical: 18.0 sin 35.0° = 10.3 m s⁻¹.
  • Top: vertical velocity 0 → time to top = 10.3/g; height = 10.3²/2g.
  • Landing (level ground): time of flight = 2 × time to top. Range = 14.7 × time of flight.
  • g = 9.81 m s⁻²: top at 1.05 s · height 5.43 m · flight 2.10 s · range 31.0 m
  • Unrounded values carried through; round only at the end.
Quick check
?A ball is launched from level ground at 20 m s⁻¹ at 60° above the horizontal. Fluid resistance is negligible. What is the speed of the ball at its highest point?
Quick check
?A ball is kicked from level ground at 18.0 m s⁻¹ at 50.0° above the horizontal. Fluid resistance is negligible. Take g = 9.81 m s⁻². How long is the ball in the air before it lands on the ground?
Quick check
?Predict first. A small plastic ball is launched without spin from level ground at 30° above the horizontal. The motion is compared with an identical launch in which fluid resistance is negligible. Which describes the effect of fluid resistance on the ball's motion?
Mission 4

With air resistance

With and without air resistancehalf itsrangepeakno drag: symmetricalsteeper, longerdescentshorter range with dragrange without dragComputed paths (drag proportional to speedsquared). Illustrative ball.
  • Air resistance (drag) acts opposite to the velocity and increases with speed.
  • The horizontal velocity component now decreases during the flight.
  • Lower highest point · shorter range · steeper, longer descent: the path is no longer symmetrical.
  • Falling far enough, the body nears its terminal speed: drag balances weight.
  • A vehicle reaches its top speed when the resistive forces equal the driving force. Less drag (a streamlined shape) → higher top speed.
Mission check

?Ball X is thrown horizontally at 8.0 m s⁻¹ from a height of 5.0 m above level ground. At the same instant, ball Y is dropped from rest from a height of 20 m. Air resistance is negligible. How does the time Y takes to reach the ground compare with the time X takes?
Mission 5

Mission 5: Push a car and a wheelbarrow equally hard. How much more slowly does the car speed up?

Make a guess: Push a car and a wheelbarrow equally hard. How much more slowly does the car speed up?

Mission 5

Newton's second law

Same push, different massessame force30 kgaccelerationsame force1200 kgacceleration: 1/40 as muchSame force: a ∝ 1/m. 40 times the mass, 1/40of the acceleration.
  • F = ma: resultant force = mass × acceleration (constant mass).
  • The acceleration is in the direction of the resultant force, not necessarily the velocity.
  • 1 newton: the resultant force that gives 1 kg an acceleration of 1 m s⁻². 1 N = 1 kg m s⁻².
  • Same force: a ∝ 1/m. Same mass: a ∝ F.
Quick check
?A crate slides to the left across a level floor with negligible friction. At one instant, two students push on it horizontally: one pushes to the left with a force of 20 N, and the other pushes to the right with a force of 30 N. Which statement about the crate at this instant is correct?
Mission 5

Worked example

  • A 1200 kg car: driving force 3000 N forwards, resistive forces 600 N backwards.
  • Resultant force = 3000 − 600 = 2400 N forwards.
  • a = F/m = 2400 ÷ 1200 = 2.0 m s⁻² forwards.
  • From rest, after 5.0 s: v = 0 + 2.0 × 5.0 = 10 m s⁻¹.
  • Always use the resultant force, never just the driving force.
Quick check
Graph with v (m s⁻¹), the velocity, on the vertical axis and t (s), the time, on the horizontal axis. Gridlines mark v =1.02.03.04.001.02.0v / m s⁻¹t / s
?A loaded trolley of mass 8.0 kg moves along a straight, level track. The graph shows the trolley's velocity v as a function of time t. What is the magnitude of the resultant force exerted on the trolley between t = 0 and t = 2.0 s?
Mission 5

Connected bodies

Block and hanging mass0.80 kg0.20 kgSmooth table, ideal pulleyBlockHanging massweightnormal contactforceT = 1.6 Nweight 2.0 NT = 1.6 NT < weight: itaccelerates down
  • Whole system first: only external forces count. Internal pulls and pushes cancel in pairs.
  • Then one object on its own: this gives the internal force (tension, or a contact force).
  • A 0.80 kg block on a smooth table is pulled by a string over an ideal pulley to a 0.20 kg hanging mass.
  • System: resultant = 0.20 × 9.81 = 1.962 N; total mass 1.00 kg → a = 1.962 ÷ 1.00 = 1.96 m s⁻².
  • Block alone: T = 0.80 × 1.96 = 1.6 N: less than the hanging weight, because the hanging mass accelerates.
Quick check
?Block X (2.0 kg) and block Y (4.0 kg) rest on a frictionless horizontal surface, joined by a light string. A horizontal force of 24 N pulls X away from Y, and both accelerate together. What is the tension in the string?
Mission check

Graph with the trolley's acceleration, a (m s⁻²), on the vertical axis against the resultant force F with subscript net,0.51.01.52.001.02.03.04.0a / m s⁻²F/ N
?A student exerts different constant resultant forces on a trolley on a level track and measures the trolley's acceleration each time. The graph shows the results. A block is then fixed to the trolley so that the mass of the trolley–block system is twice the mass of the trolley, and the experiment is repeated with the same resultant forces. Which describes the new graph of acceleration against resultant force?
Mission 6

Mission 6: Raindrops fall from high clouds. Why don't they hit the ground like bullets?

Make a guess: Raindrops fall from high clouds. Why don't they hit the ground like bullets?

Mission 6

Drag

Drag and liftDrag on a moving ballvelocitydragstill airDrag acts opposite to the velocity relativeto the air, and grows with speed.Lift and drag on a wingairflow relativeto the wingliftdragLift is perpendicular to the airflow past thewing; drag is along it.
  • Drag: the resistive force on an object moving through a fluid (a liquid or a gas). Air resistance is drag in air.
  • It acts opposite to the velocity relative to the fluid.
  • It increases with speed.
  • It also grows with cross-sectional area, a less streamlined shape, and the fluid's density.
  • Lift: the force on a moving body perpendicular to its motion through the fluid, as on an aircraft wing.
Mission 6

Falling with drag

Falling with dragweightreleasev = 0, drag = 0dragweightfallingdrag < weightdragweightterminalvelocitydrag = weightvelocitytimeno drag: a = g throughoutterminal velocitywith drag: starts assteep, then levels off
  • At release: v = 0, so drag = 0.
  • In air (upthrust negligible), the only force is the weight.
  • Speed rises → drag rises → resultant force (weight − drag) falls.
  • When drag = weight: resultant force zero.
  • The object then falls at a constant terminal velocity.
  • v–t graph: starts as steeply as the no-drag line, then curves and levels off at vT.
Quick check
?A small steel ball is released from rest in air and falls until it reaches terminal velocity. How does its acceleration change during this time?
Mission 6

Worked example: a falling ball

  • A 0.20 kg ball falls. At one instant the drag on it is 0.80 N.
  • Weight = 0.20 × 9.81 = 1.96 N. Resultant = 1.96 − 0.80 = 1.16 N downwards.
  • a = 1.16 ÷ 0.20 = 5.8 m s⁻²: less than g.
  • It keeps speeding up until drag = weight, about 2.0 N. Then a = 0: terminal velocity.
Mission 6

Top speed of a vehicle

  • Driving force forwards; drag (and friction) backwards.
  • Low speed: driving force > resistive forces, so the car accelerates.
  • Drag rises with speed until resistive forces = maximum driving force.
  • Then a = 0: the car is at its top speed.
  • Higher top speed: more driving force, or less drag (smaller frontal area, streamlined shape).
Mission 6

Drag on a projectile

A projectile with and without dragno air resistance: symmetricalhalf its rangetopWith drag (solid): lower, shorter, and thedescent is steeper than the climb. The top ispast half the range.
  • Compared with no air resistance, drag makes:
  • a lower maximum height and a shorter range.
  • a path that is not symmetrical: the descent is steeper and takes longer than the climb.
  • the horizontal velocity falls throughout the flight.
  • On a long fall, the vertical velocity approaches the terminal speed.
Quick check
?A ball is thrown at an angle in air. Its path comes down more steeply than it went up. What is the main reason?
Mission check

?Two paper cones have the same size and shape. A second cone is pushed inside one of them, doubling its mass without changing its outside shape. Both are dropped from a high balcony. Which statement about their terminal velocities is correct?
Mission 7

Mission 7: Can friction ever push an object forwards, in the direction it is moving?

Make a guess: Can friction ever push an object forwards, in the direction it is moving?

Quick check
Left: side view of a long board lying on a level floor, labelled board, with a smaller block, labelled block, resting onblockboardvblockvboardStudent’s diagramNWF
?Predict first. A board is pulled to the right along a level floor. A block resting on the board slides on it: at the instant shown, both move to the right, the board faster than the block, as the velocity arrows in the diagram show. A student draws the free-body diagram shown for the block. Which statement about the student's diagram is correct?
Mission 7

Which way does friction act?

Box on a faster beltboxvelocity of boxvelocity of beltbox relative to beltfriction on boxVelocity arrows to scale.
  • Friction acts parallel to the surfaces in contact.
  • It opposes the relative motion of the two surfaces (or the slipping that would happen without it).
  • Relative means: relative to the other surface, not to the ground.
  • Box on a belt that moves faster than the box: the box slips backwards relative to the belt, so friction on the box points forwards.
Mission 7

Grip and heating

Friction gives gripgroundshoeWalking forwards →friction on shoe: forwardsshoe pushes groundbackwardsbrake discand padheating
  • No friction, no grip: you could not walk, and tyres could not drive or brake a car.
  • Walking: your shoe pushes backwards on the ground; friction on you points forwards.
  • Sliding surfaces: work done against friction heats them. Energy is transferred to internal energy.
  • Brakes use this: kinetic energy → internal energy of discs and pads.
Mission check

?A box sits on the flat floor of a van. The van speeds up forwards along a straight, level road, and the box does not slide on the floor. Which statement about the friction force on the box is correct?
Recap

The big ideas

Mission 1

  • Distance and speed are scalars; displacement, velocity and acceleration are vectors.
  • Average velocity = displacement ÷ time; average speed = distance ÷ time. Return to the start: average velocity zero.
  • Acceleration = Δv/Δt: a change of speed or of direction. Instantaneous = average over a very short interval.

Mission 2

  • Displacement–time graph: gradient = velocity. v–t graph: gradient = acceleration, area = displacement.
  • a–t graph: area = change in velocity.
  • Curves: tangent for instantaneous values.
  • Curves: count squares for the area.

Mission 3

  • Constant acceleration only: choose the constant-acceleration equation that leaves out the quantity you neither know nor want; give every vector a sign.
  • Free fall: a = g = 9.81 m s⁻², downwards; measure g from the gradient of h against t² (gradient g/2) or v² against h (gradient 2g).

Mission 4

  • Projectile, no air resistance: horizontal velocity constant, vertical acceleration g; the two share only the time t.
  • Resolve the launch velocity; at the top the vertical velocity is zero but the speed is not.
  • Air resistance shortens the range and makes the path asymmetrical.

Mission 5

  • F = ma (constant mass): use the resultant force; the acceleration is in its direction.

Mission 6

  • Drag grows with speed. Falling, the resultant force and acceleration fall to zero when drag = weight: terminal velocity.

Mission 7

  • Friction acts parallel to the surfaces and opposes their relative slipping, so it can point forwards (a box on a faster belt, a walking foot).
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Mechanics and materials (part 2) for AQA A-level Physics. 🎉

  1. Mission 1A runner finishes a lap exactly where she started. What was her average velocity?
  2. Mission 2On a velocity–time graph, where is the distance covered hiding?
  3. Mission 3A dropped stone falls a distance d in its first second. How far does it fall in the next second?
  4. Mission 4Fire a bullet horizontally and drop another at the same instant. Which hits the ground first?
  5. Mission 5Push a car and a wheelbarrow equally hard. How much more slowly does the car speed up?
  6. Mission 6Raindrops fall from high clouds. Why don't they hit the ground like bullets?
  7. Mission 7Can friction ever push an object forwards, in the direction it is moving?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to A-Level Physics · AQA