← A-Level Physics · AQA · A-Level Physics revision
⭐ 0
AQA A-level Physics (7408) · 3.7.5 Magnetic force and electromagnetic induction
Mini-Lesson

Magnetic force and electromagnetic induction

4 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1A wire carrying a current lies between the poles of a magnet. Which way is it pushed?
  2. Mission 2A magnetic field can steer a beam of charged particles. Can it also make them go faster?
  3. Mission 3Drop a strong magnet down a copper pipe and it falls in slow motion. Why?
  4. Mission 4Switch on a current in one coil. Why does a meter on a separate coil flick, then fall back to zero?
Mission 1

Mission 1: A wire carrying a current lies between the poles of a magnet. Which way is it pushed?

Make a guess: A wire carrying a current lies between the poles of a magnet. Which way is it pushed?

Mission 1

The motor effect

The motor effectCurrent across thefieldNSCurrent along thefieldNSFcurrent out of thepagecurrentF = 0
  • A current-carrying wire in a magnetic field feels a force.
  • The force is at right angles to both the current and the field.
  • No force when the current is parallel to the field.
  • Reverse the current or the field: the force reverses.
  • Three kinds of field, three sources: gravitational (mass), electric (charge), magnetic (moving charge).
Mission 1

Which way?

Direction of the forceFleming’s left-hand ruleFirst finger: Field, into the pageseCond finger: Current, up the pagethuMb: Motion (force), to the leftIF× : B into the page
  • Fleming's left-hand rule: First finger = Field (N → S); seCond finger = Current (+ → −); thuMb = Motion (force).
Quick check
?A straight wire lies in the plane of the page and carries a current towards the right of the page. A uniform magnetic field in the plane of the page is directed towards the top of the page. What is the direction of the force on the wire?
Mission 1

How big?

Size of the force on a wireuniform field BIll = length inside the fieldat right anglesto the field
  • F = BIl, with the field perpendicular to the current.
  • The length is the length inside the field.
  • B is in tesla (T).
Mission 1

Magnetic flux density

  • B is the magnetic flux density.
  • Rearranged (current ⟂ field): B = F/(Il): force per unit current per unit length.
  • 1 tesla: the field in which a wire carrying 1 A at right angles to the field feels 1 N on each metre.
  • 1 T = 1 N A⁻¹ m⁻¹.
Mission 1

Worked example

  • A 4.0 cm length of wire carries 2.5 A at right angles to a 0.15 T field.
  • Force = 0.15 × 2.5 × 0.040 = 0.015 N.
  • Backwards: 0.012 N on a 5.0 cm wire carrying 3.0 A at right angles. B = force ÷ (current × length) = 0.012 ÷ (3.0 × 0.050) = 0.080 T.
Quick check
?A 6.0 cm length of wire carrying a current of 4.0 A lies at right angles to a uniform magnetic field. The force on it is 0.018 N. What is the magnetic flux density?
Mission 1

Measuring B with a balance

Current balancereadingbalanceNSmagnetclamped wire, seenend onF on wireF on magnetWire in series with an ammeter and a powersupply.Forces on the wire and on the magnet: equal andopposite.
  • A U-shaped magnet sits on a top-pan (digital) balance. A stiff wire is clamped across the gap, at right angles to the field, not touching the magnet.
  • Current on: the wire is pushed one way, so (Newton's third law) the magnet is pushed the other way. The reading changes by Δm.
  • F = Δm × g.
  • Vary I: plot F against I. Straight line through the origin; gradient = Bl, so B = gradient ÷ l.
  • RP10 also varies l (different magnet widths, or several magnets side by side) at fixed I.
  • Zero the balance with the current off; reverse the current and average to cancel stray effects.
Quick check
?In a current-balance experiment, 5.0 cm of a horizontal wire lies at right angles to the field between the poles of a magnet resting on a balance. With no current the balance reads 152.46 g. With a current of 3.0 A it reads 152.10 g. Take g = 9.81 N kg⁻¹. What is the magnetic flux density between the poles?
Mission check

?A long straight wire carries a current vertically upwards. It is in a uniform horizontal magnetic field that points due north. In which direction is the magnetic force on the wire?
Mission 2

Mission 2: A magnetic field can steer a beam of charged particles. Can it also make them go faster?

Make a guess: A magnetic field can steer a beam of charged particles. Can it also make them go faster?

Mission 2

Force on a moving charge

Force on a moving chargeB into the pagevF+Moving along the fieldB+vF = 0+at restF = 0
  • A current is moving charge, so a single moving charge in a field also feels a force.
  • F = BQv (velocity ⟂ field).
  • Zero force on a charge at rest, or moving along the field.
  • Example: an electron at 3.0 × 10⁶ m s⁻¹ at right angles to a 0.20 T field: F = 1.60 × 10⁻¹⁹ × 3.0 × 10⁶ × 0.20 = 9.6 × 10⁻¹⁴ N.
Mission 2

Which way?

Which way is the force?Fleming’s left-hand rulesecond finger: currentcurrent: the way a positive charge movesthumb: force (motion)first finger: field, into the pagevF+protonvF−electronelectron: second finger opposite its motion
  • Fleming's left-hand rule, with the second finger along the conventional current: the direction a positive charge moves.
  • For an electron, point the second finger opposite to its motion.
  • The force is always ⟂ to the velocity, so it does no work: the speed and kinetic energy never change.
Quick check
?An electron moves towards the right of the page, in the plane of the page, through a uniform magnetic field directed into the page. What is the direction of the magnetic force on the electron at that instant?
Mission 2

Circular paths

Circular path in a magnetic fieldB out of the page+vF+vF+vFForce always at right angles to the velocity:speed constant.
  • Only the direction changes. Uniform field, v ⟂ B: a circle.
  • The magnetic force is the centripetal force: magnetic force = mv²/r.
  • r = mv/(BQ)
  • Faster or heavier → bigger circle. Stronger field or more charge → tighter circle.
  • Time for one orbit: T = 2πr/v = 2πm/(BQ).
Mission 2

Worked example

  • A proton (m = 1.67 × 10⁻²⁷ kg, Q = 1.60 × 10⁻¹⁹ C) at 2.0 × 10⁶ m s⁻¹, at right angles to a 0.50 T field.
  • Radius: r = mv/(BQ) = (1.67 × 10⁻²⁷ × 2.0 × 10⁶) ÷ (0.50 × 1.60 × 10⁻¹⁹) = 0.042 m.
  • Period: T = 2πm/(BQ) = 1.3 × 10⁻⁷ s.
  • Double the field: r halves to 0.021 m, and T halves too, to 6.6 × 10⁻⁸ s.
Quick check
?A proton moves in a circle in a uniform magnetic field that is perpendicular to its velocity. A second proton moves at twice the speed of the first, perpendicular to the same field. Compared with the first proton, what are the radius of the second proton's circle and the time it takes to complete one revolution?
Quick check
?In a cyclotron, protons spiral outwards as they gain energy. Why can the alternating pd across the gap between the dees keep a fixed frequency?
Mission 2

Particle accelerators

Cyclotrondeedeeout+QV+QVSeen from above: B out of the page~alternating pdSpiral drawn for equal energy gains at each gapcrossing (r grows as the square root of thenumber of crossings).
  • Cyclotron: two hollow D-shaped electrodes (dees) in a uniform field B, with an alternating pd across the gap.
  • Each time a particle crosses the gap it gains energy. Inside a dee only B acts: a semicircle.
  • Faster particle → bigger semicircle, but each half-turn takes the same time, πm/(BQ). So the pd can alternate at a fixed frequency, f = BQ/(2πm).
  • The particles spiral out and leave at the edge, where r = R: vmax = BQR/m.
Mission check

?Two protons enter two separate regions at the same speed. Region 1 contains only a uniform electric field; region 2 contains only a uniform magnetic field. Each proton enters at right angles to the field lines. Gravity is negligible. A short time later, which statement is correct?
Mission 3

Mission 3: Drop a strong magnet down a copper pipe and it falls in slow motion. Why?

Make a guess: Drop a strong magnet down a copper pipe and it falls in slow motion. Why?

Mission 3

Magnetic flux

Magnetic flux through a loopnormal along BΦ = BAplane along BΦ = 0Dashed arrow: the normal to the loop. Flux: B× area when B is along the normal.
  • Magnetic flux: how much field passes through an area. Think: number of field lines through it.
  • Φ = BA, with B normal (⟂) to the area A.
  • Unit: weber. 1 Wb = 1 T m².
  • Plane of the loop parallel to the field: zero flux.
Mission 3

Flux linkage

Flux linkageN turns, each of area AThe same flux passes through every turnflux linkage = N × flux through one turn
  • A coil of N turns: the same flux passes through every turn.
  • Flux linkage = NΦ.
Quick check
?A flat coil of 150 turns, each of area 20 cm², is placed with its plane at right angles to a uniform magnetic field of 0.40 T. What is the flux linkage of the coil?
Mission 3

Faraday's law

Faraday's lawcentre-zero meterNSmoves influxtimeemftimeflat: emf = 0inheld stilloutsize of emf = rate of change of flux: thegradient of the flux graph.Sketch graphs; emf drawn as minus the gradient(opposite in sign to the gradient).
  • An emf is induced whenever the flux linkage changes: move a magnet, move the coil, change B, change the area, or turn the coil.
  • Steady flux, however large: no emf.
  • Size: emf = rate of change of flux linkage.
  • ε = N ΔΦ/Δt (magnitude).
  • On a flux linkage–time graph, size of the emf = gradient. On a graph of the flux through one turn, size of the emf = N × gradient.
Mission 3

Worked example

  • A coil of 200 turns, area 4.0 × 10⁻⁴ m², is ⟂ to a 0.50 T field. The field falls steadily to zero in 0.10 s.
  • Change in flux per turn = 0.50 × 4.0 × 10⁻⁴ = 2.0 × 10⁻⁴ Wb. Change in flux linkage = 200 × 2.0 × 10⁻⁴ = 0.040 Wb.
  • emf = 0.040 ÷ 0.10 = 0.40 V (while the field is falling).
  • Same change in 0.050 s: twice the emf. Once the field stops changing: zero.
Quick check
Graph of magnetic flux per turn, Φ / mWb, on the vertical axis (marked 0.1, 0.2, 0.3, 0.4) against time, t / s, on the h00.20.40.60.81.00.10.20.30.4Φ / mWbt / s
?The graph shows how the magnetic flux through each turn of a coil of 200 turns varies with time t. The coil is held at rest. What is the magnitude of the emf induced in the coil between t = 0.50 s and t = 0.70 s?
Mission 3

Lenz's law

Lenz's lawN pole pushed inNSNSmotionforce on magnetN pole pulled outSNNSmotionforce on magnetRed arrowheads: induced current on the nearside of each turn.
  • The induced current flows in the direction that opposes the change that produces it.
  • N pole pushed in: the near end of the coil becomes an N pole, repelling it.
  • N pole pulled out: the near end becomes an S pole, attracting it back.
  • Faraday's law gives the size of the emf; Lenz's law gives its direction.
Mission 3

Lenz's law is energy conservation

  • Suppose the induced current helped the change: the magnet would be pulled in faster, the current would grow, and so on. Energy from nothing.
  • So the induced current must oppose the motion. You must do work against that force.
  • That work becomes electrical energy, then thermal energy in the circuit.
  • Open circuit: an emf, but no current, so no opposing force.
  • A solid metal sheet or pipe acts like many loops: changing flux drives eddy currents around inside it, and they oppose the motion too.
Quick check
?The south pole of a bar magnet is pulled away from one end of a coil whose ends are joined. Which statement is correct?
Mission check

?A thick aluminium plate swings as a pendulum through the gap between the poles of a strong magnet, and stops after a few swings. An identical plate with many deep slots cut into it swings for much longer. Which explains the difference?
Mission 4

Mission 4: Switch on a current in one coil. Why does a meter on a separate coil flick, then fall back to zero?

Make a guess: Switch on a current in one coil. Why does a meter on a separate coil flick, then fall back to zero?

Mission 4

Seeing induction: magnet and coil

Magnet and coilCoil joined to a centre-zero galvanometerMagnet moving inNSneedle flicks one wayMagnet at rest insideNSno readingMagnet moving outNSflicks the other way
  • Coil joined to a centre-zero galvanometer (or data logger). Push a magnet in: the needle flicks.
  • Magnet at rest, even deep inside: no reading.
  • Pull it out, or use the other pole: the needle flicks the other way.
  • Bigger emf with: faster motion, stronger magnet, more turns.
Mission 4

Linked coils

Linked coilsiron coreswitchcoil 1coil 2Current in coil 1I₁temf in coil 2tswitch onswitch offsteady: zeroflickflick the other way
  • Two coils on one iron core. Coil 1 has a switch and a cell; coil 2 has a meter.
  • Switch on: the current in coil 1 grows, its flux grows, and coil 2's flux linkage changes: a flick.
  • Steady current: steady flux, zero emf. Switch off: a flick the other way.
  • Bigger emf with: faster change of current, more turns on coil 2, an iron core (more of coil 1's flux links coil 2).
  • An alternating current in coil 1 gives a continuous alternating emf in coil 2: the principle of the transformer.
Quick check
?According to Faraday's law of induction, the magnitude of the emf induced in a coil with a fixed number of turns is proportional to which quantity?
Mission 4

Demonstrating Lenz's law

Demonstrating Lenz's lawSolid aluminium ringNSmagnet approachesmoves awayRing with a slitNSmagnet approachesslitSlit: emf but no current, so no forceand no movement.
  • Hanging aluminium ring. Push a magnet towards it: the ring moves away. Pull the magnet back: the ring follows.
  • Ring with a slit: no complete circuit, no current, no movement. The emf alone exerts no force.
  • Galvanometer and coil: find which way current makes an N pole at the coil's end (test with a cell). Push an N pole in: the coil's near end becomes N.
  • Each time, the induced current opposes the change. To keep the magnet moving you must do work: that is where the electrical energy comes from.
Quick check
?Some trains brake with strong magnets held just above the steel rail. The magnets move along the rail with the train and never touch it. Where does the train's kinetic energy go, and how does the braking force change as the train slows down?
Mission 4

A coil turning in a field

A coil turning in a fieldCoil seen edge-on, in a uniform field BBθ = 0°face-on: largestBθ = 60°halfBθ = 90°edge-on: zeroRed dashed arrow: normal to the coil. θ ismeasured from B to the normal.Flux linkage against θflux linkage / Wbθ0.0300.015−0.03090°180°270°360°60°Values: 50 turns, A = 3.0 × 10⁻³ m², B =0.20 T.
  • Rectangular coil, N turns, area A, in a uniform field B. θ = angle between B and the normal to the coil.
  • NΦ = BAN cos θ
  • Coil face-on to the field (θ = 0): flux linkage largest, BAN. Edge-on (θ = 90°): zero.
  • Example: N = 50, A = 3.0 × 10⁻³ m², B = 0.20 T. Largest flux linkage = 0.030 Wb. At θ = 60°: 0.030 × cos 60° = 0.015 Wb.
Quick check
?A flat rectangular coil of 100 turns measures 4.0 cm by 5.0 cm. It starts with its plane perpendicular to a uniform magnetic field of strength 0.40 T and is then rotated through 60° in 0.050 s, about an axis perpendicular to the field. What is the magnitude of the average emf induced during the rotation?
Mission 4

Search coil and oscilloscope

Search coil and oscilloscopea.c. supplyalternating Bθsearch coil ona protractoroscilloscopepeak emfPeak emf against cos θpeak emfcos θ00.510straight line throughthe origin
  • Search coil: a small flat coil with many turns and a known area.
  • Put it in an alternating field (e.g. inside a solenoid or between coils fed with a.c.). Its flux linkage alternates, so it gives an alternating emf.
  • The oscilloscope shows the peak emf, which is proportional to the peak flux linkage (fixed frequency).
  • RP11: turn the coil to angle θ (protractor) and record the peak emf. Plot peak emf against cos θ: a straight line through the origin.
Quick check
?A search coil is connected to an oscilloscope and placed in a uniform alternating magnetic field. With the normal to the coil parallel to the field, the peak emf is 12 mV. The coil is turned so that its normal makes an angle of 60° with the field. What is the new peak emf?
Mission 4

Reading flux-linkage graphs

Flux linkage and emf graphsFlux linkage against timeflux linkage / Wbt / s0.06000.200.400.50risesflatfallsemf against timeemf / Vt / s−0.300.6000.30 V0.60 V,opposite directionemf = −(gradient of the flux linkage graph)Steeper → bigger emf. Flat → zero.
  • Size of emf = gradient of the flux linkage–time graph. The induced emf opposes the change, so the graph draws it as minus the gradient.
  • Example: flux linkage rises steadily from 0 to 0.060 Wb in 0.20 s: emf = 0.060 ÷ 0.20 = 0.30 V.
  • Flux linkage then stays at 0.060 Wb: emf = 0.
  • Flux linkage falls to 0 in 0.10 s: emf = 0.060 ÷ 0.10 = 0.60 V, in the opposite direction.
  • Steeper gradient → bigger emf. Flat → none, whatever the value.
Mission check

?Two coils share an iron core. The current in coil 1 rises steadily from 0 to 2.0 A in 0.40 s, stays at 2.0 A for a while, then falls steadily to zero in 0.10 s. How does the emf induced in coil 2 compare in the three intervals?
Recap

The big ideas

Mission 1

  • Force on a current in a field: at right angles to both; zero when parallel.
  • Direction: Fleming's left-hand rule.
  • F = BIl (perpendicular).
  • 1 T: 1 N on 1 m of wire carrying 1 A at right angles to the field.

Mission 2

  • F = BQv for v ⟂ B.
  • The force is ⟂ to v, so speed and kinetic energy never change.
  • v ⟂ B gives a circle: r = mv/(BQ) = p/(BQ); the period does not depend on speed.

Mission 3

  • Flux Φ = BA with B ⟂ A; flux linkage NΦ. Unit: Wb = T m².
  • Faraday: emf = rate of change of flux linkage; no change, no emf.
  • Lenz: the induced current opposes the change; otherwise energy would be created.

Mission 4

  • Induced emf only while flux linkage changes: faster change, stronger field or more turns give more emf.
  • Lenz's law in practice: the induced current opposes the change, so work must be done; a cut ring has emf but no current and no force.
  • Turning coil: NΦ = BAN cos θ, largest face-on, zero edge-on.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Magnetic force and electromagnetic induction for AQA A-level Physics. 🎉

  1. Mission 1A wire carrying a current lies between the poles of a magnet. Which way is it pushed?
  2. Mission 2A magnetic field can steer a beam of charged particles. Can it also make them go faster?
  3. Mission 3Drop a strong magnet down a copper pipe and it falls in slow motion. Why?
  4. Mission 4Switch on a current in one coil. Why does a meter on a separate coil flick, then fall back to zero?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to A-Level Physics · AQA