← A-Level Physics · AQA · A-Level Physics revision
⭐ 0
AQA A-level Physics (7408) · 3.7.3 Electric potential
Mini-Lesson

Electric potential

2 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1If the electric field at a point is zero, must the electric potential there be zero too?
  2. Mission 2Mass, charge and moving charge all make fields. Why is a uniform electric field simply V divided by d?
Mission 1

Mission 1: If the electric field at a point is zero, must the electric potential there be zero too?

Make a guess: If the electric field at a point is zero, must the electric potential there be zero too?

Mission 1

Electric potential

  • Electric potential at a point: the work done per unit charge to bring a small positive test charge from infinity to that point.
  • Zero at infinity, by definition.
  • A scalar: it has a sign but no direction.
  • Unit: J C⁻¹ = volt (V).
  • Set by the source charges, not by the test charge: any test charge at P, of any size or sign, sees the same V.
Mission 1

Potential of a point charge

Potential near a point charger (m)potential (V)−400−20020040000.100.200.30360 V180 V+4.0 nC: V positivenegative charge:V negativeBoth curves ∝ 1/r, approaching 0 far away.
  • V = Q/4πε0r
  • Falls as 1/r, not 1/r² (field strength falls as 1/r²).
  • Positive charge: V positive, highest near the charge. Negative charge: V negative.
  • Example: +4.0 nC. At 0.20 m, V = 180 V.
Mission 1

Potentials add as numbers

Field zero, potential not+4.0 nC+4.0 nCMequal and opposite: E = 0potential (V)40080012000480 V at MAt M the potential curve is flat (E = 0) butV is not zero.Positions to scale.
  • Several charges: add the potentials, with their signs. No angles, no components.
  • Two charges of +4.0 nC, 0.30 m apart. Midpoint M is 0.15 m from each.
  • Field at M: equal and opposite → E = 0.
  • Potential at M: 240 V + 240 V = 480 V. Not zero.
  • E = 0 does not mean V = 0. The field depends on how V changes, not on its value.
Mission 1

Work and potential difference

  • Work done moving charge Q: ΔW = QΔV
  • Worked example: move +2.0 nC from 0.20 m to 0.10 m from the +4.0 nC charge.
  • ΔV = 360 − 180 = 180 V. Work done on it by an external force (moved slowly) = 2.0 × 10⁻⁹ × 180 = 3.6 × 10⁻⁷ J.
  • Released at 0.10 m, it is pushed outwards. By 0.20 m it has gained 3.6 × 10⁻⁷ J of kinetic energy.
  • A negative charge does the opposite: it speeds up moving towards higher V.
  • Only the start and end potentials matter, not the path.
Quick check
?A point charge of +5.0 nC is fixed in place. A second charge of +2.0 nC is moved slowly from a point 0.30 m from the fixed charge to a point 0.10 m from it. Take 1/(4πε0) = 8.99 × 10⁹ N m² C⁻². What is the work done on the +2.0 nC charge by the external force?
Mission 1

Equipotentials

EquipotentialsPoint chargeEqual steps of V:closer together nearthe charge.Between platesEvenly spaced,parallel to theplates.equipotentialfield lineThey cross at 90°. No work is done movingalong an equipotential.
  • Equipotential: a surface (or line on a 2D map) where V is the same everywhere.
  • Moving along one: ΔV = 0, so no work is done.
  • Always perpendicular to field lines.
  • The field points towards lower potential.
  • Point charge: concentric spheres. Equal steps of V get closer together near the charge.
  • Uniform field between plates: parallel planes, evenly spaced.
Mission 1

How the field follows from the potential

Potential gradient and areaPotential against distance (+4.0 nC)V (V)r (m)02004000.100.200.30Tangent at 0.20 m:gradient = −9.0 × 10² V m⁻¹E = size of the gradient = 9.0 × 10² V m⁻¹The field points down the potential gradient,to lower V.Field strength against distanceE (V m⁻¹)r (m)0200040000.100.200.30area = ΔV= 360 − 180 = 180 V
  • E = ΔV/Δr (size of the potential gradient)
  • Direction: the field points down the potential gradient, towards lower V.
  • The field depends on how V changes, not on its value.
  • Uniform field: E = V/d. 400 V across 2.0 cm → 2.0 × 10⁴ V m⁻¹.
  • Point charge: E at r = −(gradient of the tangent) to the V–r curve. Its size is how steep the curve is.
  • Steep curve → strong field. Flat (maximum or minimum) → E = 0, whatever V is.
  • ΔV = area under the E–r graph between two distances.
Quick check
?In a region of uniform electric field of strength 4.0 × 10³ V m⁻¹ directed in the +x direction, point A at x = 0 has an electric potential of +500 V. What is the electric potential at point B, at x = 0.050 m?
Quick check
?Which statement is true for the electric field of a point charge, but never true for the gravitational field of a point mass?
Mission 1

Electric and gravitational fields compared

Gravitational and electric fieldsGravitationalElectricSourcemasschargeForceF = Gm₁m₂/r²F = Q₁Q₂/4πε₀r²always attractiveattractive or repulsiveField strengthg = GM/r²E = Q/4πε₀r²PotentialV = −GM/rV = Q/4πε₀ralways negativesign of QShared: potential zero at infinity;equipotentials ⟂ field lines; no work alongan equipotential.rpotentialelectric V, +Qelectric V, −Qgravitational V: alwaysbelow the axis
  • Source: mass ↔ charge.
  • Force: F = Gm1m2/r², always attractive ↔ F = Q1Q2/4πε0r², attractive or repulsive.
  • Field strength: g = GM/r² ↔ E = Q/4πε0r². Both inverse-square.
  • Potential: V = −GM/r, always negative ↔ V = Q/4πε0r, sign of Q.
  • Shared: potential zero at infinity; field lines; equipotentials ⟂ field lines; no work along an equipotential.
  • g = −ΔV/Δr; E = ΔV/Δr.
  • Between two protons, the electric force is about 10³⁶ times the gravitational force.
Mission check

?Point charges +Q and −Q are fixed a short distance apart, and M is the midpoint between them. A student claims: 'The potential at M is zero, so no work is needed to bring a small test charge from infinity to M, and the test charge feels no electric force at M.' Which evaluation of the claim is correct?
Mission 2

Mission 2: Mass, charge and moving charge all make fields. Why is a uniform electric field simply V divided by d?

Make a guess: Mass, charge and moving charge all make fields. Why is a uniform electric field simply V divided by d?

Mission 2

Fields: one idea, several kinds

  • A field is a region where an object feels a non-contact force.
  • Gravitational field: acts on mass. Created by mass.
  • Electric field: acts on charge. Created by charge.
  • Magnetic field: acts on moving charge. Created by moving charge (currents).
  • Field strength is always force per unit of what the field acts on: a vector.
Quick check
?A beam of electrons passes between the poles of a strong magnet. A charged dust grain sits at rest between the same poles. Which of them feels a force from the magnetic field?
Mission 2

Why E = V/d

Work across the gapV0+++QF = QEsame force all the way acrossdW = Fd = QEdW = QV (definition of p.d.)QEd = QV, so E = V/d
  • A charge Q crosses the gap d between parallel plates with p.d. V.
  • The field is uniform, so the force F = QE is constant. Work done: W = Fd = QEd.
  • By the definition of p.d., the work done is also W = QV.
  • QEd = QV, so E = V/d.
  • Units agree: V m⁻¹ = J C⁻¹ m⁻¹ = N C⁻¹.
Mission 2

Worked example: two routes, one answer

  • Plates 3.0 mm apart, p.d. 12 V. An electron (charge e = 1.60 × 10⁻¹⁹ C) crosses the gap.
  • Field: E = 12 ÷ (3.0 × 10⁻³) = 4.0 × 10³ V m⁻¹.
  • Route 1, force × distance: F = eE = 6.4 × 10⁻¹⁶ N; W = Fd = 6.4 × 10⁻¹⁶ × 3.0 × 10⁻³ = 1.9 × 10⁻¹⁸ J.
  • Route 2, charge × p.d.: W = eV = 1.60 × 10⁻¹⁹ × 12 = 1.9 × 10⁻¹⁸ J.
  • The two routes agree. That agreement is E = V/d.
Quick check
?Two parallel plates 5.0 mm apart have a p.d. of 2.0 kV between them. A proton (charge 1.60 × 10⁻¹⁹ C) crosses from one plate to the other. How much work does the field do on it?
Mission check

?Two parallel plates are connected to a fixed p.d. They are pulled apart until the gap between them is doubled. For a proton crossing the whole gap, what happens to the force on it and to the work done on it by the field?
Recap

The big ideas

Mission 1

  • Potential = work done per unit positive charge from infinity; V = Q/4πε0r; a scalar, so potentials simply add.
  • The field is the potential gradient: equipotentials are ⟂ to field lines, and E = 0 does not mean V = 0.
  • Electric potential takes the sign of Q; gravitational potential is always negative.

Mission 2

  • Fields: gravitational (mass), electric (charge), magnetic (moving charge); field strength is force per unit mass or per unit charge.
  • E = V/d follows from W = Fd = QEd and W = QV: the work done crossing the gap is QV, whatever the gap.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Electric potential for AQA A-level Physics. 🎉

  1. Mission 1If the electric field at a point is zero, must the electric potential there be zero too?
  2. Mission 2Mass, charge and moving charge all make fields. Why is a uniform electric field simply V divided by d?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to A-Level Physics · AQA