← AP Microeconomics
⭐ 0
AP Microeconomics · Unit 2: Supply and Demand · 2.8 The Effects of Government Intervention in Markets; 2.9 International Trade and Public Policy
Mini-Lesson

AP® Microeconomics Unit 2: The Effects of Government Intervention in Markets; International Trade and Public Policy

5 missions. Guess, learn, then check. Your place is saved.

Aligned to AP Microeconomics, Unit 2: Supply and Demand · 2.8 The Effects of Government Intervention in Markets; 2.9 International Trade and Public Policy; also 6.4 The Effects of Government Intervention in Different Market Structures

Short, curiosity-driven missions (about 20 minutes each) that teachers can assign. Use them alongside AP Classroom practice.

  1. Mission 1What happens when a government makes something cheaper by law?
  2. Mission 2Why would a government ever make something cost more?
  3. Mission 3When a government taxes sugary drinks, who really pays the tax: the shoppers or the companies?
  4. Mission 4When a government pays firms for every item they make, who ends up with the money?
  5. Mission 5When a country taxes goods from abroad, who ends up paying, and who comes out ahead?

Also part of this unit: 1 mission in Equilibrium and Surplus; Market Disequilibrium and Changes in Equilibrium.

AP® is a trademark registered by the College Board, which is not affiliated with, and does not endorse, this website.

Mission 1

Mission 1: What happens when a government makes something cheaper by law?

Make a guess: A law holds the price of bread below the market price. What is most likely?

Mission 1

A legal top price

Ceiling above and below equilibriumCeiling above Pe: not bindingP0PcPeQeQDSCeiling below Pe: bindingP0PePcQeQDSPc: price ceiling
  • A price ceiling: a legal maximum price.
  • To have any effect it must be set below the equilibrium price. Then it is binding.
  • Set above equilibrium, it changes nothing: the market price is already lower.
  • Why do governments use them? To make essentials affordable (rents, basic food, fuel) and to protect consumers from sharp price rises.
Mission 1

Why a shortage appears

Shortage under a ceilingP0PePcQsQeQdshortage (excess demand)QDSPc: price ceiling
  • Step 1: market clears at Pe, Qe.
  • Step 2: a ceiling is drawn below Pe.
  • At the lower price, quantity demanded extends to Qd.
  • Quantity supplied contracts to Qs.
  • Step 3: the gap Qd − Qs is excess demand: a shortage.
  • Only Qs is bought and sold. Trade falls from Qe to Qs.
  • Say: "quantity demanded increases and quantity supplied decreases" — not: "demand increases".
Quick check
?In a market, the equilibrium price is $20. The government sets a maximum price of $25. What happens?
Mission 1

Worked example: how big is the shortage?

  • Illustrative data. Demand: Qd = 100 − 2P. Supply: Qs = 4P − 20 (P in $, Q in thousands).
  • Equilibrium: 100 − 2P = 4P − 20, so 6P = 120, Pe = $20, Qe = 60.
  • Ceiling at $15:
  • Qd = 100 − 2 × 15 = 70.
  • Qs = 4 × 15 − 20 = 40.
  • Shortage = 70 − 40 = 30 thousand.
  • Quantity traded falls from 60 to 40.
Mission 1Graph lab

Lower the ceiling

Lower the ceilingPQ6020DSprice ceilingshortage 30
  • Takeaway: the lower the ceiling, and the more elastic demand and supply are, the bigger the shortage.
Quick check
?Use the illustrative market in an earlier screen (Qd = 100 − 2P, Qs = 4P − 20). The ceiling is set at $18. What is the shortage?
Mission 1

Who gets the goods?

  • Price no longer rations, so something else does:
  • Waiting in line (first come, first served), waiting lists, lotteries.
  • Ration coupons from the government.
  • Sellers' preference: friends, regular customers, or discrimination.
  • Black (shadow) markets: illegal resale above the ceiling.
  • In an earlier screen, only 40 thousand units are supplied. Buyers would pay up to $30 for the 40-thousandth unit (100 − 2P = 40 gives P = 30), so black-market prices can rise above the old equilibrium of $20.
Mission 1

Winners and losers

Welfare under a ceilingP0PePcQsQeQBCEdemand priceDSB: moves from producers to consumersDWL = C + E
  • Assume the scarce goods go to the buyers who value them most.
  • Area B (between Pe and the ceiling, up to Qs): moves from producers to consumers who still buy.
  • Areas C + E (between Qs and Qe): trades that no longer happen. This is the deadweight (welfare) loss.
  • Consumers: gain B, lose C. Those who buy gain; those shut out lose.
  • Producers: lose B and E. Always worse off.
  • If goods go to the wrong buyers (waiting in line, luck), consumers gain less, and the time spent waiting is a further loss.
  • Say: "welfare loss" or "deadweight loss" — not: "the shortage is the loss" (the shortage is a quantity, the loss is an area).
Mission 1

Worked example: welfare in numbers

  • Same illustrative market as an earlier screen. Demand meets the price axis at $50; supply at $5.
  • Before: consumer surplus = ½ × 60 × (50 − 20) = 900. Producer surplus = ½ × 60 × (20 − 5) = 450.
  • Ceiling $15, Q = 40. Demand price at Q = 40 is $30.
  • Producer surplus = ½ × 40 × (15 − 5) = 200 (down 250).
  • Consumer surplus = 1000 (up 100): gains B = (20 − 15) × 40 = 200, loses C = ½ × 20 × (30 − 20) = 100.
  • Deadweight loss = ½ × 20 × (30 − 15) = 150. Check: 1350 − 1200 = 150.
  • Spending by consumers (and producers' revenue): 20 × 60 = 1200 → 15 × 40 = 600.
Quick check
Welfare under a ceilingP0PePcQsQeQBCEDS
?The diagram shows a ceiling below Pe. Area B is the rectangle between Pe and the ceiling, from 0 to Qs. C is the triangle between Qs and Qe, below demand and above Pe. E is the triangle between Qs and Qe, above supply and below Pe. Which area is the deadweight loss?
Mission 1

Case: rent control

  • In 1994, San Francisco extended rent control to small, older rental buildings.
  • Covered tenants became nearly 20% more likely to stay at their address.
  • But landlords of covered buildings cut their supply of rental housing by 15% (selling to owner-occupiers, converting to condominiums).
  • Rents across the city rose by an estimated 5.1%: new renters paid more.
  • Over time supply becomes more elastic, so the shortage grows.
  • Landlords may cut maintenance, so quality falls.
  • Tenants stay in homes that no longer suit them: housing is misallocated and workers move less.
  • Supporters point to security: tenants avoid sudden rent rises and can stay in their communities.
Mission 1

Ceilings in different market structures

Ceiling on a monopolyP0PmPcP = MCQmQ1QeQMR = PcDMRMCATCPc: price ceiling, between Pm and P = MCMR = Pc up to demand, then the old MROutput rises from Qm to Q1; no shortage.
  • Perfect competition: a binding ceiling cuts Q to where it meets S. Shortage and DWL.
  • Monopoly: the firm sets Q where MR = MC and charges a price from D.
  • A ceiling below the monopoly price but above the price where MC meets D makes MR flat at the ceiling.
  • The firm then produces more, up to where the ceiling meets D. Price falls, quantity rises, no shortage.
  • At the price where MC meets D: the allocatively efficient output (P = MC).
  • Below that: a shortage appears again.
  • Other quantity controls (for example, a cap on taxi licenses) also open a gap between what buyers will pay and sellers' cost.
Quick check
?An unregulated monopoly maximizes profit by charging $40. Its MC curve meets the demand curve at $25. The government sets a price ceiling of $30. What happens to output?
Mission check

?A city caps rents below the equilibrium rent. Demand for rental homes does not change over the next ten years, yet the shortage of rental homes gets bigger. Which best explains this?
Mission 2

Mission 2: Why would a government ever make something cost more?

Make a guess: A law sets the lowest price for milk above the market price. What happens to the amount of milk people buy?

Mission 2

A legal bottom price

Price floor below and above equilibriumFloor below Pe: not bindingP0PeQeQDSPf (price floor)Floor above Pe: bindingP0PeQeQDSPf (price floor)
  • A price floor: a legal minimum price.
  • To have an effect it must be set above the equilibrium price (binding).
  • Why do governments use them?
  • Raise producers' incomes, especially farmers, whose prices swing with the weather.
  • Cut consumption of harmful (demerit) goods, such as cheap strong alcohol.
  • The minimum wage is a floor in the labor market.
Mission 2

Why a surplus appears

Why a surplus appearsP0PeQdQeQssurplus (excess supply)QDSPf (price floor)
  • Step 1: market clears at Pe, Qe.
  • Step 2: a floor is drawn above Pe.
  • At the higher price, quantity demanded contracts to Qd.
  • Quantity supplied extends to Qs.
  • Step 3: the gap Qs − Qd is excess supply: a surplus.
  • Without other action, only Qd is sold. Trade falls from Qe to Qd.
  • Say: "quantity demanded decreases and quantity supplied increases" — not: "demand decreases".
Quick check
?Illustrative data. Demand: Qd = 100 − 2P. Supply: Qs = 4P − 20 (P in $, Q in thousands). Equilibrium is $20 and 60 thousand. A minimum price of $25 is set. What is the surplus?
Mission 2

What happens to the surplus?

Government buys the surplusP0PeQdQeQsQDSPf (price floor)government spending = Pf × (Qs − Qd)
  • Left unsold: producers carry the cost of goods they cannot sell. Some sell illegally below the floor.
  • Bought by the government (a guaranteed price): taxpayers pay. The stock must be stored, destroyed, given away or sold abroad cheaply.
  • Production limits: output is capped so less surplus is made.
  • Real case: the US dairy price support program bought dairy products that did not sell. By December 1981, more than 560 million pounds of cheese were in government warehouses. The President ordered 30 million pounds given free to people in need.
  • Say: "excess supply" or "surplus" — not: "oversupply means supply has shifted".
Mission 2

Worked example: a guaranteed price

  • Illustrative data: same market as an earlier screen. Floor $25, and the government buys the surplus.
  • Qd = 50, Qs = 80, surplus = 30 thousand.
  • Government spending = $25 × 30 = $750 thousand.
  • Consumers' spending: 20 × 60 = $1200 → 25 × 50 = $1250 thousand (they pay more for less).
  • Producers' revenue: $1200 → 25 × 80 = $2000 thousand.
  • Of that $2000, consumers pay 1250 and taxpayers 750.
Mission 2Graph lab

Raise the floor

Raise the floorPQ (thousands)6020government buysDSprice floor
  • Takeaway: a higher floor and more elastic demand and supply mean a bigger surplus and a bigger bill.
Quick check
?Use the market in an earlier screen. The government guarantees a minimum price of $22 and buys any surplus. How much does it spend?
Mission 2

Case: minimum unit pricing for alcohol

  • Scotland set a minimum price per unit of alcohol: 50p from 2018, raised to 65p on 30 September 2024.
  • Prices here are in British money: £1 = 100p (pence). 70 cl = 700 mL. "Spirit" means liquor.
  • A unit is 10 ml of pure alcohol. Units = volume (liters) × % alcohol.
  • 70 cl bottle of 40% spirit: 0.7 × 40 = 28 units. Minimum price = 28 × 65p = £18.20 (it was £14.00 at 50p).
  • It mainly raises the price of cheap, strong drinks.
  • Estimates for the first years (Public Health Scotland, 2023), compared with no policy: alcohol sales down about 3%, deaths wholly caused by alcohol down 13.4%, hospital admissions down 4.1%.
  • Unlike a tax, the extra money goes to retailers and producers, not the government.
  • Debate: supporters say it targets harmful drinking; critics say it hits low-income drinkers hardest and rewards retailers.
Quick check
?Under a 65p minimum unit price, what is the lowest legal price for a 75 cl bottle of wine that is 13% alcohol?
Mission 2

Winners and losers

Welfare under a price floorP0PeQdQeQDSPf (price floor)transfer from consumers to producersdeadweight lossFirms produce Qd.
  • Consumers lose: they pay more and buy less.
  • Producers who sell gain: the higher price on Qd (a transfer from consumers).
  • If the state buys the surplus: producers gain much more, taxpayers pay, and resources are used to make goods nobody buys at that price. Large deadweight loss.
  • If nobody buys it: producers lose on the unsold output, and a deadweight loss appears between Qd and Qe.
  • Allocative inefficiency: at Qs, the cost of the last unit is above what buyers value it at.
  • But for a demerit good with external costs, the market quantity may be too high. A floor that cuts consumption toward the social optimum can raise welfare.
  • Perfect competition: a binding floor creates a surplus and DWL. With fewer firms, the effect on output depends on the market structure and on elasticity, as with ceilings (see Mission 1).
Quick check
?A minimum price is set above Pe. The government does not buy any surplus, and firms produce only what they can sell (Qd). On the minimum-price diagram on the previous screen, which area moves from consumers to producers?
Mission check

?To cut smoking, a government wants to raise the retail price of cigarettes by the same amount using either a new tax per pack or a minimum price per pack. Assume both give the same retail price. What is the main difference between them?
Mission 3

Mission 3: When a government taxes sugary drinks, who really pays the tax: the shoppers or the companies?

Make a guess: When a government taxes sugary drinks, who really pays the tax: the shoppers or the companies?

Mission 3

A tax on spending

Who hands the tax to the governmentBuyerSellerpays the priceGovernmentper-unit (excise) taxBuyers pay the tax onlythrough the price.
  • An excise tax is a tax on a specific good. Here it is a per-unit tax: a fixed amount on each unit.
  • The seller hands the tax to the government. Buyers pay it only through the price.
  • Examples: federal and state taxes on gasoline, cigarettes and alcohol.
  • To the seller, the tax is like an extra cost of each unit sold.
  • A lump-sum tax (one fixed total, e.g. a license fee) changes only fixed cost: MC does not move, so the firm's profit-maximizing P and Q do not change.
Mission 3

The tax diagram

Tax incidenceP0PcP1PpQ2Q1QDSS1S2 = S1 + taxtconsumers' burden: (Pc − P1) × Q2producers' burden: (P1 − Pp) × Q2Tax revenue = both rectangles = t × Q2DWL: units between Q2 and Q1 no longertraded
  • Build it in steps (a tax of t per unit):
  • 1. Start at equilibrium: Pe, Qe.
  • 2. Supply shifts up by the tax: S → S + tax. Vertical gap = t.
  • 3. New equilibrium: price buyers pay rises to P1; quantity falls to Q1.
  • Sellers keep P1 − t per unit.
  • The price rises by less than the tax (unless demand is perfectly inelastic or supply perfectly elastic).
  • Say: "supply decreases; quantity demanded decreases" — not: "demand decreases".
  • Labels: S1 → S2 (= S1 + tax), price paid by consumers Pc, price received by producers Pp, quantity Q1 → Q2.
Mission 3

Who bears the tax?

Tax incidenceP0PcP1PpQ2Q1QDSS1S2 = S1 + taxtconsumers' burden: (Pc − P1) × Q2producers' burden: (P1 − Pp) × Q2Tax revenue = both rectangles = t × Q2DWL: units between Q2 and Q1 no longertraded
  • Tax incidence: how the burden is split between buyers and sellers.
  • Consumers' share per unit = Pc − P1 (the rise in the price they pay).
  • Producers' share per unit = P1 − Pp, where Pp = Pc − t (the fall in the price they keep).
  • The two shares add up to the tax, t.
  • Government revenue = t × Q2: the rectangle between Pc and Pp, from 0 to Q2.
Mission 3

The lost triangle

Tax incidenceP0PcP1PpQ2Q1QDSS1S2 = S1 + taxtconsumers' burden: (Pc − P1) × Q2producers' burden: (P1 − Pp) × Q2Tax revenue = both rectangles = t × Q2DWL: units between Q2 and Q1 no longertraded
  • Units between Q1 and Qe are no longer traded.
  • Buyers valued them above their cost of production, so the gain on those units is lost.
  • This loss is the deadweight loss (it is not tax revenue): the triangle between D and S, from Q1 to Qe.
  • DWL = ½ × t × (Qe − Q1).
  • If the market was efficient, a tax can only reduce allocative efficiency.
Quick check
Areas A, B and C after a taxP0P1PeP2Q1QeQABCDSS + taxtABC
?The diagram shows a market before and after a tax of a fixed amount per unit: D, S and S + tax; equilibrium Pe and Qe before; P1 and Q1 after; and P2 = P1 − tax. Which area shows the burden on producers?
AreaPosition
ARectangle between P1 and Pe, from 0 to Q1
BRectangle between Pe and P2, from 0 to Q1
CTriangle between D and S, from Q1 to Qe
DRectangles A and B together
Mission 3

Worked example

  • Illustrative data. Before the tax: P = $6, Q = 60 units.
  • Per-unit tax: $1.50. After the tax: consumers pay $7, Q = 50.
  • Producers receive $7 − $1.50 = $5.50.
  • Consumers' burden: ($7 − $6) × 50 = $50. Producers' burden: ($6 − $5.50) × 50 = $25.
  • Government revenue: $1.50 × 50 = $75.
  • Welfare (deadweight) loss: ½ × $1.50 × (60 − 50) = $7.50.
  • CS falls by ½ × ($7 − $6) × (60 + 50) = $55; PS falls by ½ × ($6 − $5.50) × (60 + 50) = $27.50.
  • Check: $55 + $27.50 = $75 revenue + $7.50 DWL.
Quick check
?Illustrative data. Before a tax, a good sells at 5.00 per unit and 100 units are traded. After a tax of 2.00 per unit, consumers pay 6.20 and 76 units are traded. What is the total burden of the tax on producers?
Mission 3

Elasticity decides the split

Elasticity and tax incidence(a) Inelastic demand: consumers bear mostP0PcP1PpQDS1S2(b) Elastic demand: producers bear mostP0PcP1PpQDS1S2Perfectly inelasticdemand: consumersbear it allPQDS1S2Perfectly elasticdemand: producersbear it allPQDS1S2consumers' burdenproducers' burden
  • The side of the market that is less price elastic bears more of the tax.
  • Inelastic demand (e.g. cigarettes, fuel): sellers raise the price and buyers keep buying, so consumers bear most.
  • Elastic demand: buyers switch away, so sellers must absorb the tax: producers bear most.
  • Extreme cases:
    • perfectly inelastic demand: consumers bear it all
    • perfectly elastic demand: producers bear it all
  • Approximate consumers' share = PES ÷ (PES + |PED|).
  • Say: "demand is price inelastic" — not: "demand is low".
Mission 3Graph lab

Shift the burden

Start: a tax of 1.50 per unit; PED −1, PES 2. Consumers bear 2/3 of each unit's tax.

Shift the burdenPQQ2Q1PcP1PpDS1S2 = S1 + tax
  • Takeaway: less elastic demand → consumers bear a bigger share (here 8/9), and Q falls less.
Quick check
?A government wants to raise as much revenue as possible from a tax of the same amount per unit, with the smallest fall in quantity sold. Supply conditions are similar. Which good should it tax?
Mission 3

Stakeholders

  • Consumers: pay a higher price, buy less; consumer surplus falls.
  • Producers: keep less per unit, sell less; producer surplus falls. Revenue falls.
  • Workers: fewer units made can mean fewer jobs in the industry.
  • Government: gains revenue (t × Q1) to spend; can target goods it wants used less.
  • Society:
    • in an efficient market, a deadweight loss
    • where the good has a negative externality, the tax can move output toward the social optimum
Mission 3

Case: two US excise taxes

  • Philadelphia taxes sweetened drinks at 1.5 cents per ounce (since January 2017).
    • Distributors owe the tax to the city; shoppers hand over nothing directly.
  • The federal excise tax on cigarettes: about $1.01 per pack of 20 (since April 2009).
    • Manufacturers and importers send it to the government.
  • In both, who sends the money does not settle who bears the tax: the elasticities do.
  • Smokers' demand is price inelastic. Unless supply is even less elastic, theory predicts most of the burden falls on buyers, and quantity (so revenue) falls only a little.
Mission check

?A city has a fixed number of parking spaces and no space to add more. The city now charges the owners a fixed tax for each space used per day. Demand for parking is unchanged. Who bears the tax?
Mission 4

Mission 4: When a government pays firms for every item they make, who ends up with the money?

Make a guess: When a government pays firms for every item they make, who ends up with the money?

Mission 4

A payment per unit

A payment per unitGovernmentProducersubsidy per unitlower priceBuyer
  • A subsidy is a payment from the government to producers that lowers their costs.
  • A per-unit subsidy pays a fixed amount for each unit produced.
  • Why governments use them:
    • lower prices of goods they want used more, e.g. public transport
    • support producers' incomes, e.g. farmers
    • raise output where there are external benefits
  • A lump-sum subsidy (one fixed total) changes only fixed cost: MC does not move, so the firm's P and Q do not change.
Mission 4

The subsidy diagram

Subsidy incidenceP0PpP1PcQ1Q2QDS1S1S2sS2 = S1 − subsidyconsumers' gain: (P1 − Pc) × Q2producers' gain: (Pp − P1) × Q2Dashed box: cost to government = s × Q2DWL: extra units cost more than buyersvalue them
  • Build it in steps (a subsidy of s per unit):
  • 1. Start at equilibrium: Pe, Qe.
  • 2. Supply shifts down by the subsidy: S → S − subsidy. Vertical gap = s.
  • 3. New equilibrium: the price buyers pay falls to P1; quantity rises to Q1.
  • Producers receive P1 + s per unit.
  • The price falls by less than the subsidy (unless demand is perfectly inelastic or supply perfectly elastic).
  • Say: "supply increases; quantity demanded increases" — not: "demand increases".
  • Labels: S1 → S2 (= S1 − subsidy), price paid by consumers Pc, price received by producers Pp, quantity Q1 → Q2.
Mission 4

Who gains, and what it costs

Subsidy incidenceP0PpP1PcQ1Q2QDS1S1S2sS2 = S1 − subsidyconsumers' gain: (P1 − Pc) × Q2producers' gain: (Pp − P1) × Q2Dashed box: cost to government = s × Q2DWL: extra units cost more than buyersvalue them
  • Cost to the government = s × Q1: the rectangle between P1 + s and P1, from 0 to Q1.
  • That rectangle splits in two:
    • consumers' gain per unit = Pe − P1
    • producers' gain per unit = (P1 + s) − Pe
  • The two gains per unit add up to the subsidy, s.
  • Consumer surplus and producer surplus both rise.
Quick check
Market with a subsidy: areas W, X, Y, ZP0PpP1PcQ1Q2QWXYS2DS1Z
?The diagram shows a market before and after a per-unit subsidy: D, S1 and S2 = S1 − subsidy; equilibrium P1 and Q1 before; after it, consumers pay Pc, quantity is Q2 and producers receive Pp = Pc + subsidy. Which area shows the total cost of the subsidy to the government?
AreaPosition
WRectangle between P1 and Pc, from 0 to Q2
XRectangle between Pp and P1, from 0 to Q2
YTriangle between S1 and D, from Q1 to Q2
ZRectangle between Pp and Pc, from 0 to Q2
Mission 4

Paying more than anyone gains

Subsidy incidenceP0PpP1PcQ1Q2QDS1S1S2sS2 = S1 − subsidyconsumers' gain: (P1 − Pc) × Q2producers' gain: (Pp − P1) × Q2Dashed box: cost to government = s × Q2DWL: extra units cost more than buyersvalue them
  • The government pays for the whole rectangle.
  • Consumer and producer surplus rise by less than that.
  • The gap is a deadweight loss: the triangle between S and D, from Qe to Q1.
  • Why? The extra units cost more to make than buyers value them.
  • DWL = ½ × s × (Q1 − Qe). In an efficient market, a subsidy reduces allocative efficiency.
  • Where there are external benefits, a subsidy can instead move output toward the social optimum.
Mission 4

Worked example

  • Illustrative data. Before: P = $8, Q = 60 units.
  • Per-unit subsidy: $3. After: consumers pay $6, Q = 70; producers receive $9.
  • Government spending: $3 × 70 = $210.
  • CS rises by ½ × ($8 − $6) × (60 + 70) = $130.
  • PS rises by ½ × ($9 − $8) × (60 + 70) = $65.
  • Deadweight (welfare) loss: $210 − $130 − $65 = $15 = ½ × $3 × (70 − 60).
Quick check
?Illustrative data. Before a subsidy, a good sells at 10.00 per unit and 200 units are traded. After a subsidy of 4.00 per unit, consumers pay 7.00 and 260 units are traded. What is the total cost of the subsidy to the government?
Mission 4

Elasticity decides the split

Elasticity decides the split(a) Inelastic demand: consumers gain mostP0PpP1PcQDS1S2(b) Elastic demand: producers keep mostP0PpP1PcQDS1S2Perfectly inelasticdemand: consumersget it allPQDS1S2Perfectly elasticdemand: producersget it allPQDS1S2consumers' gainproducers' gain
  • The side of the market that is less price elastic gets more of the subsidy.
  • Inelastic demand: the price falls a lot → consumers gain most.
  • Elastic demand: the price barely falls → producers keep most.
  • Extreme cases:
    • perfectly inelastic demand: consumers get it all; Q does not change
    • perfectly elastic demand: price unchanged; producers get it all
  • More elastic demand and supply → a bigger rise in Q (and a bigger bill).
  • Approximate consumers' share = PES ÷ (PES + |PED|).
Mission 4Graph lab

Who keeps the subsidy?

Start: a subsidy of 2 per unit; PED −0.5, PES 1. Consumers get 2/3 of each unit's subsidy.

Who keeps the subsidy?PQQ1Q2PpP1PcDS1S2
  • Takeaway: more elastic demand → the price falls less, so producers keep more (consumers' share 1/3) and Q rises more.
Quick check
?A government subsidizes a good to cut the price that buyers pay. In which market will buyers get the largest share of each unit's subsidy?
Mission 4

Stakeholders

  • Consumers: pay less, buy more; consumer surplus rises.
  • Producers: receive more per unit, sell more; producer surplus rises.
  • Workers: more output can mean more jobs in the industry.
  • Government: pays s × Q1. Opportunity cost: that money cannot fund schools or hospitals, or must come from taxes or borrowing.
Mission 4

Case: paying the buyer instead

  • From 2023 to 30 September 2025, US buyers of qualifying new electric cars could claim a federal tax credit of up to $7,500.
  • This subsidy went to buyers, so it shifted demand up, not supply.
  • The split is the same: it depends on elasticities, not on who receives the payment.
  • If car supply is inelastic, sellers can raise prices and keep much of the credit.
Mission check

?A small country's wheat farmers sell all their wheat at the world price, which they are too small to change. The government pays farmers a subsidy for every metric ton they grow. Who gains the subsidy?
Mission 5

Mission 5: When a country taxes goods from abroad, who ends up paying, and who comes out ahead?

Make a guess: When a country taxes goods from abroad, who ends up paying, and who comes out ahead?

Mission 5

From no trade to free trade

Free trade with a world priceP074205080imports 60QDdSdPWCSPSNo trade (autarky)
  • Start with domestic demand and domestic supply only (no trade). Price settles at 7, quantity 50 (illustrative data).
  • Now open the border. A small country is a price taker: it can buy or sell any amount at the world price (Pw).
  • World price 4, below the domestic price:
    • consumers buy more: 80
    • domestic firms produce less: 20
    • the gap, 80 − 20 = 60, is imports.
  • No trade at all is called autarky.
  • The domestic price falls to the world price, and imports fill the gap between domestic quantity demanded and domestic quantity supplied.
  • Say: "domestic supply" — not just "supply": with trade, total supply at Pw is domestic output plus imports.
Mission 5

Worked example: imports, exports and surplus

Free trade with a world priceP074205080imports 60QDdSdPWCSPSNo trade (autarky)

Same model (illustrative data): domestic demand reaches zero at a price of 12; domestic supply starts at a price of 2.

  • No trade: CS = ½ × (12 − 7) × 50 = 125; PS = ½ × (7 − 2) × 50 = 125; total surplus 250.
  • Free trade at PW 4: CS = ½ × (12 − 4) × 80 = 320; PS = ½ × (4 − 2) × 20 = 20; total surplus 340.
  • Consumers gain 195, domestic producers lose 105: total surplus rises by 90.
Quick check
?A country that did not trade in rice opens its market. The world price of rice is below its domestic no-trade price. Which outcome follows?
Mission 5

The protectionist toolbox

Protectionism: government measures that shield domestic producers from foreign competition.

  • Tariff: a tax on imports (per unit, or a percentage of value).
  • Quota: a legal limit on the quantity (or value) of a good that may be imported.
Mission 5

The tariff diagram

TariffP06420406080imports 60imports 20QDdSdPWPW + tarifftariffCSPSCSPSgovernment revenueCSPSgovernment revenueDWL

Follow the diagram step by step (illustrative data):

1. Free trade at Pw = 4: domestic output 20, consumption 80, imports 60.

2. A tariff of 2 per unit: the price in the home market rises to Pw + tariff = 6.

3. Domestic output extends to 40; consumption contracts to 60; imports fall to 20.

4. Government revenue = tariff × imports after the tariff: the rectangle.

5. Two triangles: the deadweight (welfare) loss.

  • Producer side: high-cost domestic firms replace cheaper imports (wasted resources).
  • Consumer side: buyers who valued the good above the world price no longer buy it.
  • Say: "domestic supply extends" — not: "supply increases": the curve does not shift.
Mission 5

Worked example: counting a tariff's effects

TariffP06420406080imports 60imports 20QDdSdPWPW + tarifftariffCSPSCSPSgovernment revenueCSPSgovernment revenueDWL

Tariff of 2 per unit, Pw 4 → 6 (illustrative data):

EffectCalculationValue
Tariff revenue2 × 2040
Producer surplus gain½ × (20 + 40) × 260
Consumer surplus loss½ × (80 + 60) × 2140
Deadweight loss140 − 60 − 4040
  • The loss is the two triangles: ½ × 2 × 20 = 20 (production) + ½ × 2 × 20 = 20 (consumption).
  • Total surplus falls by the DWL of 40; part of the lost CS becomes PS and government revenue.
Mission 5Graph lab

Raise the tariff

Raise the tariffPQ02040608010004710revenueDSPwPw + tariffimports 40
  • Takeaway: a higher tariff cuts imports, so revenue can stay flat or fall, while the deadweight loss grows faster than the tariff. At a tariff of 3 imports stop entirely.
Quick check
Tariff diagram with areas a to dP06420406080QabcdDdSdPWPW + tariff
?The tariff diagram from D2 is divided into areas:
AreaWhere it is (between Pw and Pw + tariff)
aleft of domestic supply, from 0 up to the curve
btriangle between domestic supply and the vertical line at the new domestic output
crectangle above the new imports (from new domestic output to new consumption)
dtriangle between the new consumption line and domestic demand

Which areas show the deadweight (welfare) loss of the tariff?

Mission 5

Quotas (no graph needed)

  • A quota caps the quantity of a good that may be imported.
  • Fewer imports → less supply in the domestic market → higher domestic price.
  • Domestic producers sell more at the higher price: PS rises.
  • Consumers pay more and buy less: CS falls.
  • No tariff revenue: the extra price per unit goes to whoever holds the right to import (unless the government sells those rights).
  • Total surplus falls: there is a DWL, as with a tariff.
Quick check
?A government replaces a tariff on imported shoes with an import quota. The quota is set so that the domestic price of shoes stays exactly the same. What changes?
Mission 5

Real case: washing machines, 2018

  • In 2018 the USA put safeguard tariffs on imported large washing machines.
  • The tariff rate was higher once imports passed a set number of units each year.
  • Researchers (Flaaen, Hortaçsu and Tintelnot, 2020) found:
    • washer prices rose by nearly 12%
    • dryers, which were not taxed, rose by about the same amount: dryers are complements, often bought as a pair, and sellers raised both prices
  • Domestic brands raised their prices too. Counting washers and dryers together, buyers in the USA paid more than the tariff itself.
  • Lesson: a tariff's cost can spread into related markets.
Mission check

?A small country puts a tariff on imported steel. It cannot affect the world price of steel. Which statement is correct?
Recap

The big ideas

Mission 1

  • A binding maximum price sits below equilibrium. Quantity demanded extends, quantity supplied contracts: a shortage.
  • Non-price rationing and black markets follow. Producers lose, some consumers gain, and a deadweight loss appears.
  • Under monopoly, a ceiling between the monopoly price and the price where MC meets D can raise output.

Mission 2

  • A binding minimum price sits above equilibrium. Quantity demanded contracts, quantity supplied extends: a surplus.
  • Someone pays for the surplus: producers (unsold goods) or taxpayers (guaranteed prices).
  • Consumers pay more; sellers keep the higher price.

Mission 3

  • A per-unit tax shifts supply up by the tax; the price rises by less than the tax and quantity falls.
  • The burden falls more on whichever side is less price elastic, whoever hands the money over.
  • In an efficient market the tax also creates a deadweight (welfare) loss.

Mission 4

  • A subsidy shifts supply down by the subsidy; the price falls by less than the subsidy and quantity rises.
  • The government pays s × Q1; the less elastic side of the market gets more of it.
  • In an efficient market a subsidy costs more than the gains it creates: a deadweight (welfare) loss.

Mission 5

  • Free trade at a world price below the domestic price: consumption rises, domestic output falls, imports fill the gap.
  • A tariff or quota raises the domestic price: home producers gain, consumers lose more, and there is a deadweight loss. Tariff revenue goes to the government; quota rent goes to license holders.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Unit 2: Government Intervention in Markets; International Trade and Public Policy for AP Microeconomics. 🎉

  1. Mission 1What happens when a government makes something cheaper by law?
  2. Mission 2Why would a government ever make something cost more?
  3. Mission 3When a government taxes sugary drinks, who really pays the tax: the shoppers or the companies?
  4. Mission 4When a government pays firms for every item they make, who ends up with the money?
  5. Mission 5When a country taxes goods from abroad, who ends up paying, and who comes out ahead?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to AP Microeconomics