5 missions. Guess, learn, then check. Your place is saved.
Mission 1When a product is very profitable and anyone can start selling it, where do the profits go?
Mission 2If one company controls a whole market, why doesn't it just charge the highest price it can?
Mission 3Why can a popular new kind of café make big profits at first, then only just cover its costs later?
Mission 4Why can two people sitting side by side on the same train have paid very different fares?
Mission 5Why might it make sense for only one company to lay the water pipes in a city?
Mission 1
Mission 1: When a product is very profitable and anyone can start selling it, where do the profits go?
Make a guess: When a product is very profitable and anyone can start selling it, where do the profits go?
Mission 1
The long run
Long run: all factors can change. Firms can enter or leave the industry.
In perfect competition there are no barriers, so entry and exit are free.
Normal profit: the minimum return needed to keep the firm's resources in this industry. It is their opportunity cost.
Normal profit is counted inside AC. So at P = AC, the owners earn just enough to stay.
Say: "normal profit" — not: "no profit". The owners are still paid their opportunity cost.
Mission 1
Supernormal profit attracts entry
Step 1 of 4
Build it in steps (two panels: industry and firm):
1. Industry: D and S1 set price P1, above minimum AC. Firm: supernormal profit rectangle.
2. Profit is a signal: new firms enter. Industry supply shifts right: S1 → S2.
3. Price falls to P2 = minimum AC. Each firm cuts output back to the lowest point of AC.
4. Supernormal profit is gone: normal profit only. Entry stops.
Quick check
?A perfectly competitive industry is earning supernormal profit. New firms enter until the long run is reached. What happens to output?
Mission 1
Losses drive exit
The mirror image:
1. Price below minimum AC: firms make losses.
2. In the long run, loss-making firms leave. Industry supply shifts left: S1 → S2.
3. Price rises back to minimum AC.
4. The firms that remain make normal profit. Exit stops.
Mission 1
Long-run equilibrium
Entry and exit stop only when price = minimum AC.
Firm in long-run equilibrium: P = AR = MR = MC = AC (at its minimum).
Each firm makes normal profit: no reason to enter or leave.
Industry: D and S set this price; the number of firms adjusts to match demand.
Mission 1Graph lab
A demand boom
Illustrative data. 240 identical firms, each making normal profit at a price of 26. Assume each firm's costs do not change as the industry grows.
Takeaway: entry continues until price is back at minimum AC (26). More firms; same output each.
Mission 1
Worked example: the boom, step by step
Illustrative data. Each firm: minimum AC = 26 at 30 units.
Start: market demand at 26 is 7,200 units → 7,200 ÷ 30 = 240 firms.
Short run: demand rises. Still 240 firms. Price jumps to 43; each firm makes 40 units.
Industry output: 240 × 40 = 9,600.
Profit per firm: (43 − 28) × 40 = 600 (supernormal profit). AC at 40 units = 28.
Long run: firms enter until price = 26 again.
Market demand at 26 is now 14,700 units → 14,700 ÷ 30 = 490 firms.
Industry output doubles and more; each firm is back to 30 units and normal profit.
Quick check
?Illustrative data. In a perfectly competitive industry, each firm's minimum AC is 4 at an output of 500 units. Today 100 firms each produce 550 units and sell at 6. At a price of 4, market demand would be 60,000 units. Costs do not change as firms enter. How many firms will there be in the long run?
Mission 1
Why the long run is efficient
Allocative efficiency: P = MC. The value of the last unit to buyers equals its cost.
Productive efficiency: output at minimum AC, the lowest cost per unit.
Consumers pay the lowest price that firms can sustain: minimum AC.
Mission 1Evaluate
A benchmark, not a description
Few real markets meet every assumption: products differ, information is costly, entry takes time and money.
It depends on economies of scale: where minimum efficient scale is large, many small firms would each have high costs. A few big firms can produce more cheaply.
It depends on innovation: with only normal profit in the long run, and rivals able to copy any idea, firms have little to fund or reward R&D. Dynamic efficiency may be weak.
It depends on time: entry and exit can take years, so supernormal profits and losses can last.
Still useful: it is the benchmark against which monopoly and other structures are judged.
Mission check
?A city's market for bicycle repairs is perfectly competitive and in long-run equilibrium. The city then charges every repair firm a fixed yearly fee, whatever its output. Demand is unchanged. What happens in the long run?
Free entry and exit push price to minimum AC. Any change in costs or demand is eventually competed into the price.
Mission 2
Mission 2: If one company controls a whole market, why doesn't it just charge the highest price it can?
Make a guess: If one company controls a whole market, why doesn't it just charge the highest price it can?
Mission 2
A price maker
Pure monopoly: one firm supplies the whole market. No close substitutes. High barriers to entry.
Monopoly power: the power to set price above marginal cost. A firm with a large market share can have it without being the only seller.
The monopolist's demand curve is the market demand curve: it slopes down.
So it is a price maker: it chooses price, or output, but not both. Demand decides the other.
Demand = average revenue (AR): the price received per unit.
Mission 2
Where monopoly power comes from
Legal barriers: patents, licences, state franchises. A patent normally lasts up to 20 years.
Economies of scale: a large incumbent has lower average cost than any small entrant.
Control of a key resource or of the network buyers must use.
Sunk costs and brand loyalty: entry is costly and hard to recover.
Few close substitutes: the fewer the substitutes, the less price elastic the firm's demand.
More barriers and fewer substitutes mean more monopoly power, and power that lasts.
Mission 2
Why MR is below AR
Illustrative data. To sell one more unit, the firm must cut the price on every unit.
Quantity
Price (AR)
Total revenue
Marginal revenue
1
10
10
10
2
9
18
8
3
8
24
6
4
7
28
4
5
6
30
2
The 5th unit sells for 6, but the price cut on the first 4 units loses 4. MR = 6 − 4 = 2.
So MR < AR at every output after the first.
With a straight-line demand curve, MR is twice as steep as AR.
Say: "MR lies below AR for a monopolist" — not: "price equals marginal revenue".
Quick check
?Illustrative data. A monopolist can sell 4 units a day at a price of 20, or 5 units a day at a price of 18. What is the marginal revenue of the 5th unit?
Mission 2
Profit is greatest where MR = MC
Step 1 of 3
If MR > MC, one more unit adds more to revenue than to cost: raise output.
If MR < MC, the last unit adds more to cost than to revenue: cut output.
So profit is maximised at the output where MR = MC.
Price: go up from that output to the demand (AR) curve.
A monopolist always produces where demand is price elastic: MR is positive there.
Say: "read price off the AR curve at the MR = MC output" — not: "price is set where MR = MC".
Mission 2Graph lab
Choose the output
Illustrative data: AR = 50 − Q; MC = AC = 10.
Takeaway: profit peaks where MR = MC (Q = 20), not where revenue or price is highest.
Mission 2
Worked example: price, profit and lost surplus
Illustrative data. AR = 50 − Q, so MR = 50 − 2Q. MC = AC = 10.
A competitive industry with the same costs: P = MC = 10, Q = 40.
Deadweight loss (a later screen explains it) = ½ × (40 − 20) × (30 − 10) = 200.
Mission 2
Extra profit, normal profit or a loss
Profit per unit = AR − AC at the MR = MC output.
AR > AC: supernormal profit. AR = AC: normal profit. AR < AC: a loss.
Short run: a loss-making monopolist keeps producing if price covers AVC. Below AVC it shuts down.
Long run: barriers stop entry, so profit above normal can last. A firm that cannot cover AC in the long run leaves.
Say: "barriers to entry let supernormal profit persist in the long run" — not: "a monopoly always makes a profit".
Quick check
?Illustrative data. A monopolist maximises profit at an output of 300 units. At that output, AR = 12, ATC = 9 and MC = MR = 6. What is its profit?
Mission 2
Monopoly versus perfect competition
Step 1 of 3
Same costs, constant MC = AC. Compare the two outcomes.
Perfect competition: P = MC, output Qc, price Pc.
Monopoly: MR = MC, so output is lower (Qm < Qc) and price is higher (Pm > Pc).
Rectangle (Pm − Pc) × Qm: consumer surplus transferred to the monopolist.
Triangle from Qm to Qc, below D and above MC: units worth more than they cost, never made. This is the deadweight loss.
Monopoly is allocatively inefficient: P > MC.
Say: "the rectangle is a transfer; the triangle is the deadweight loss" — not: "the whole fall in consumer surplus is lost".
Quick check
?A monopoly is compared with a competitive industry with the same constant MC. Which area is the deadweight loss caused by the monopoly?
Area
Where it is
w
Triangle below D and above Pm, from 0 to Qm
x
Rectangle between Pm and Pc, from 0 to Qm
y
Triangle below D and above MC, from Qm to Qc
z
Rectangle below Pc and above 0, from 0 to Qm
Mission 2
Static and dynamic efficiency
Allocative: P > MC, so output is too low.
Productive: output is usually not at the lowest point of AC.
X-inefficiency: with no rivals, costs can drift above the lowest possible AC: slack management, waste.
Dynamic efficiency may go either way:
Supernormal profit can fund research and development, and a patent protects the reward.
But a firm safe behind barriers may feel little pressure to innovate.
Say: "X-inefficiency" for costs above the lowest possible AC — not: "productive inefficiency".
Mission 2
Economies of scale versus efficiency
Illustrative data. Same demand, AR = 50 − Q.
Many small firms with no economies of scale: MC = AC = 30. Price 30, output 20.
One large firm with economies of scale: MC = AC = 6.
MR = MC: Q = 22, P = 28.
The monopoly charges less and sells more, and still earns supernormal profit.
It is still allocatively inefficient: P (28) > MC (6).
A large home firm may be big enough to compete internationally, against large foreign rivals.
Mission 2
Monopoly power as a market failure
Market failure: the market misallocates resources.
Monopoly power: price above MC, too little output, a deadweight loss.
Mission 2Evaluate
Is monopoly always bad?
Consumers: higher prices and less choice; but possibly lower prices if economies of scale are large.
Workers and suppliers: one dominant buyer may hold down pay or input prices; or profits fund secure jobs.
Owners: supernormal profit. Government: more tax on profits.
It depends on economies of scale: big enough to outweigh the deadweight loss?
It depends on what profit is used for: research and new products, or higher payouts?
It depends on barriers: if entry is possible, the threat of rivals can hold prices down.
It depends on regulation: price caps and competition law can limit abuse.
Mission check
?Illustrative case: a town's only ferry operator sets one fare for all passengers. At its current fare, its marginal revenue is 4 and its marginal cost is 7 per passenger. What should it do to raise its profit?
A monopolist weighs each extra sale: the best price is where MR = MC, not the highest price it could charge.
Mission 3
Mission 3: Why can a popular new kind of café make big profits at first, then only just cover its costs later?
Make a guess: Why can a popular new kind of café make big profits at first, then only just cover its costs later?
Mission 3
Many firms, different products
Monopolistic competition: many firms, each selling a differentiated product.
Low barriers to entry and exit.
Each firm has a little price-setting power: its product is not identical to rivals'.
Examples: cafés, hairdressers, restaurants, takeaways, a new style of café such as bubble tea.
Firms are small, so each one acts independently: it does not plan around one rival's reaction.
Mission 3
Standing out: non-price competition
Product differentiation: real or perceived differences (quality, design, location, service, brand).
Non-price competition: competing on anything but price: branding, advertising, loyalty cards, opening hours, new menu items.
Aim 1: shift the firm's demand curve right (more customers at each price).
Aim 2: make demand less price elastic (customers less willing to switch).
Say: "the firm's demand curve slopes downward because its product is differentiated" — not: "because it has few rivals".
Quick check
?A hairdresser in a busy town centre raises its price slightly. It loses some customers but not all of them. Which best explains why?
Mission 3
The short run
Step 1 of 3
Profit is maximised where MR = MC. Price is read up to the AR curve.
AR > AC: supernormal profit. AR < AC: a loss. AR = AC: normal profit.
In the short run, this looks just like the monopoly diagram (see Mission 2). The difference is what happens next.
Profit above normal is a signal. Barriers are low, so new firms enter.
Each firm loses some customers to the newcomers: its demand curve shifts left.
More close substitutes: demand becomes more price elastic.
Entry stops when AR just touches (is tangent to) AC: normal profit.
Losses work the other way: firms leave, and each remaining firm's demand shifts right until AR touches AC again.
Say: "each firm's demand curve shifts left as firms enter" — not: "the market demand curve falls".
Mission 3Graph lab
Let new firms in
Illustrative data. Start: 4 shops; each earns a profit of 390.
Takeaway: entry continues until profit is normal, at the point where AR touches AC to the left of the lowest point of AC.
Mission 3
Worked example: the long run
Step 4 of 4
Illustrative data. After entry, each shop's demand: AR = 18 − 0.125Q, so MR = 18 − 0.25Q.
Costs are unchanged: MC = 0.2Q; AC = 360/Q + 0.1Q.
MR = MC: 18 − 0.25Q = 0.2Q, so Q = 40.
Price: 18 − 0.125 × 40 = 13.
AC at Q = 40: 360/40 + 0.1 × 40 = 9 + 4 = 13.
P = AC: profit per unit 0. Normal profit.
PED at the chosen price: SR −2; LR −2.6. Demand is more elastic after entry.
Mission 3
Excess capacity
The long-run tangency is on the falling part of AC.
So output is below the output at the lowest AC: excess capacity.
In the previous screen: output 40; lowest AC (12) at 60. Excess capacity = 60 − 40 = 20 units.
Not productively efficient: P = AC = 13 > lowest AC = 12.
Not allocatively efficient: P = 13 > MC = 8. Buyers value one more unit more than it costs to make.
Say: "excess capacity: output is below the level that minimises AC" — not: "the firm has too many workers".
Quick check
?Illustrative data. In long-run equilibrium, a monopolistically competitive firm produces 18 units at a price of 34. At that output, AC = 34 and MC = 18. Its AC is lowest at 30 units, where AC = 30. Which describes this firm?
Mission 3
Compared with the other models
Long run
Perfect competition
Monopolistic competition
Monopoly
Products
Identical
Differentiated
Unique
Barriers
None
Low
High
Demand facing firm
Horizontal
Downward, quite elastic
Downward, less elastic
Profit
Normal
Normal
Above normal can last
P and MC
P = MC
P > MC
P > MC
Output at lowest AC?
Yes
No: excess capacity
Not usually
The key gain over perfect competition: variety. Buyers can choose the café, style or location they like best.
Mission 3
Advertising
Step 1 of 2
Advertising aims to shift the firm's demand right and make it less price elastic (brand loyalty).
It also raises costs: AC shifts up.
Short run: if extra sales outweigh the extra cost, profit rises.
Long run: rivals copy the idea, and new firms enter. Profit returns to normal.
Informative advertising (prices, opening hours, what is new) helps buyers choose.
Persuasive advertising (image, brand) may add to costs and prices without making the product better.
Quick check
?A nail salon launches a successful advertising campaign that makes its customers more loyal. In the short run, what happens to the salon's demand curve?
Mission 3Evaluate
Is excess capacity a waste?
It depends on how much buyers value variety: a slightly higher price than perfect competition may be the cost of choice.
It depends on how elastic demand is: with many close substitutes, demand is very elastic, the tangency is near the lowest AC, and the excess capacity is small.
It depends on the type of advertising: informative or persuasive.
It depends on dynamic efficiency: normal profit leaves little to fund research, but rivalry pushes firms to try new products.
It depends on how realistic the model is: some firms build brands, or win locations, that rivals cannot easily copy.
Mission check
?Illustrative case: a town has a few gyms making large profits. Opening a gym is easy, and each gym differs a little in equipment and classes. New gyms open until the market settles. Which describes a typical gym in the new long-run equilibrium?
Low barriers mean profit above normal attracts entry until each firm's AR just touches AC, on the falling part of AC.
Mission 4
Mission 4: Why can two people sitting side by side on the same train have paid very different fares?
Make a guess: Why can two people sitting side by side on the same train have paid very different fares?
Mission 4
Same product, different prices
Price discrimination: charging different buyers different prices for the same good or service, for reasons not linked to cost.
Examples: peak and off-peak train fares; child and adult cinema tickets; student discounts.
Not price discrimination: a higher price because supplying costs more (e.g. delivery to a remote island).
Say: "price discrimination" only when cost is the same — not: for any price difference.
Mission 4
Three conditions
1. Market power: the firm must be a price maker. A price taker cannot set prices.
2. Separate groups with different price elasticities of demand, and a way to tell them apart (age, time, place, ID). The group with the more elastic demand gets the lower price.
3. No resale: buyers at the low price must not be able to sell on to those charged more.
If resale is easy, the low-price group buys for everyone (market seepage or arbitrage).
Quick check
?A firm with market power plans to charge students a lower price than other adults for an identical product. Its costs are the same for both groups. Which situation would stop this plan from raising its profit?
Mission 4
Three degrees
First degree (perfect): each buyer pays their own maximum willingness to pay.
Second degree: price depends on how much you buy: bulk discounts, lower price per unit after a set amount.
Third degree: different prices for different groups: age, time of day, location.
Real firms rarely know every buyer's maximum price. Personalised online pricing is an attempt to get closer.
Mission 4
Third degree: the diagram
Two markets, the same MC (constant).
In each market, the firm produces where MR = MC.
Price in each market is read off its own AR (demand) curve.
The less price elastic market pays the higher price.
The more elastic market pays less: a high price there would lose too many sales.
Say: "the higher price is charged in the market where demand is less price elastic" — not: "the richer group always pays more".
Mission 4
Worked example: business travellers and students
Illustrative data. MC = AC = 20.
Business travellers: AR = 120 − Q, so MR = 120 − 2Q.
MR = MC: Q = 50, P = 70.
Students: AR = 40 − 0.5Q, so MR = 40 − Q.
MR = MC: Q = 20, P = 30.
PED at those prices: business −1.4; students −3. Students pay less.
One price for all: the best single price is 70. Students (who pay at most 40) buy nothing.
Same two markets as the previous screen. Now the students' demand grows: at every price, students want to buy more.
Takeaway: each market has its own MR = MC price. The less elastic group pays more; when both groups have the same PED, they pay the same price.
Quick check
?Illustrative data. A firm sells in two separate markets with the same constant MC = 10. In market A, AR = 70 − 2Q, so MR = 70 − 4Q. In market B, AR = 30 − 0.5Q, so MR = 30 − Q. Which prices maximise its profit?
Mission 4
Perfect price discrimination
Step 1 of 2
Each unit sells at the buyer's maximum price, so the demand curve becomes the MR curve.
The firm produces where D = MC, the P = MC output: the same output as perfect competition.
All consumer surplus becomes producer surplus. Consumer surplus = 0.
No deadweight loss: allocatively efficient output.
Illustrative data (as): AR = 50 − Q, MC = 10.
Single price: Q = 20, profit 400, consumer surplus 200, deadweight loss 200.
Say: "efficient but not equitable" — not: "consumers gain because output rises".
Quick check
?A single-price monopolist becomes able to practise perfect (first-degree) price discrimination. Its costs do not change. Compared with before, which statement is correct?
Mission 4
Who gains and who loses?
Producers: more profit. It may fund investment, or keep a service running (e.g. a rail route).
Consumers in the high-price group: pay more; lose consumer surplus.
Consumers in the low-price group: may be served for the first time.
In an earlier screen, students were served only under price discrimination.
Total output: may rise. Then some deadweight loss is removed.
Real example: the 16–25 Railcard gives one third off most rail fares in Great Britain.
Mission 4Evaluate
Good or bad?
It depends on output: if total output rises, welfare can rise; if it does not, welfare usually falls.
It depends on who pays more: lower prices for students, children or pensioners can help equity; higher prices for those who must travel at peak times may not.
It depends on use of profit: research and investment, or higher payouts to owners?
It depends on costs of separating groups: checking ID, building booking systems.
It depends on fairness: buyers may see personalised prices as exploitation.
Mission check
?Illustrative case: a theme park charges local residents less than tourists for an identical day ticket. Its costs are the same for both groups. Which pair of conditions is needed for this to earn more profit than one price for all?
Different prices for the same thing need market power, groups with different elasticities, and no resale.
Mission 5
Mission 5: Why might it make sense for only one company to lay the water pipes in a city?
Make a guess: Why might it make sense for only one company to lay the water pipes in a city?
Mission 5
What makes a monopoly natural
Some industries have huge fixed costs and low marginal costs: water pipes, rail track, power grids.
So average cost keeps falling as output rises, across the whole market.
Natural monopoly: one firm can supply the whole market at a lower average cost than two or more firms could.
A second network would duplicate the fixed cost: wasteful.
Say: "natural monopoly" for a cost reason — not: "a monopoly protected by law or a patent".
Mission 5
Worked example: one network or two?
Illustrative data. A town needs 300 connections. The network costs 1,200 (fixed). Each connection adds 2 (marginal cost).
One firm: AC = 1,200 ÷ 300 + 2 = 4 + 2 = 6.
Two firms, 150 connections each: AC = 1,200 ÷ 150 + 2 = 8 + 2 = 10.
Splitting the market raises average cost from 6 to 10.
Same marginal cost; the difference is the fixed cost spread over fewer users.
Quick check
?Illustrative data. A rail line has a fixed cost of 900 and a marginal cost of 3 per journey. The market is 150 journeys. If two firms each build their own line and each carries 75 journeys, what is each firm's average cost?
Mission 5
The natural monopoly diagram
Step 1 of 3
AC (LRAC) falls across the whole demand curve. MC lies below AC.
P = AC: Q = 300, P = 10. AC = 1,800 ÷ 300 + 4 = 10. Normal profit.
P = MC: Q = 360, P = 4. AC = 1,800 ÷ 360 + 4 = 9.
Loss = (9 − 4) × 360 = 1,800: the whole fixed cost.
Mission 5Graph lab
Set the price cap
Same natural monopoly. A regulator sets a maximum price (price cap).
Takeaway: lowering the cap raises output; profit is normal at P = AC (10); below that the firm makes a loss.
Mission 5
Price caps: RPI − X
UK regulators of privatised utilities (e.g. Ofwat for water, Ofgem for energy) cap prices.
The classic formula, first used in 1984, is RPI − X: prices may rise each year by inflation (RPI) minus X%.
Worked example: RPI = 4%, X = 2. Maximum price rise = 4 − 2 = 2%. A price of 50 can rise to 51.
If the firm cuts costs by more than X, it keeps the extra profit: an incentive to be efficient.
Water added K for investment: RPI − X + K. Newer UK caps use other inflation measures (CPI or CPIH); the idea is the same.
Quick check
?Illustrative data. A regulated firm's price cap is RPI − X. RPI inflation is 3% and X is set at 5. What can the firm do to its price this year?
Mission 5
Other ways to regulate
Profit (rate-of-return) regulation: profit capped at a % of capital.
Risk: little reason to cut costs; firms may over-invest to raise the allowed profit.
Quality standards: a price cap can tempt a firm to cut quality. Regulators set standards (e.g. leaks, delays).
Performance targets: fines or rewards linked to service, e.g. punctuality or customer complaints.
Impact: lower prices and higher output, but possibly less profit for investment.
Mission 5Evaluate
Does regulation work?
It depends on information: the firm knows its costs better than the regulator. X may be set too low or too high.
It depends on regulatory capture: a regulator may come to serve the industry it regulates.
It depends on quality: price caps can lead to cost cuts that harm service, unless standards are enforced.
It depends on investment: tight caps may squeeze money for new pipes, track and cables.
Mission check
?Illustrative case: a small town is served by one broadband network that costs a lot to build but very little to connect each extra home. A second firm plans to build its own full network and win half the town's homes. Assuming total demand does not change, what happens to the average cost of supplying a home?
Where average cost falls across the whole market, a second network duplicates the fixed cost. That is why such industries usually have one supplier, and why its prices are regulated.
Recap
The big ideas
Mission 1
Supernormal profit attracts entry; losses cause exit. Both stop at price = minimum AC.
Long-run equilibrium: P = MR = MC = minimum AC; normal profit (zero economic profit).
It is allocatively and productively efficient.
Mission 2
A monopolist faces the downward-sloping market demand, so MR < AR.
It produces where MR = MC and reads price off AR: higher price, lower output than perfect competition.
Result: a transfer of surplus to the firm and a deadweight (welfare) loss; possible X-inefficiency, but possible economies of scale and research.
Mission 3
Many firms, differentiated products, low barriers: each firm has a downward-sloping, fairly elastic demand curve.
Short run: MR = MC; profit above normal or a loss is possible. Long run: entry or exit leaves normal profit (AR tangent to AC).
Long run: excess capacity and P > MC, but buyers get variety.
Mission 4
Price discrimination: different prices for the same product, not explained by cost.
Conditions: market power; groups with different PED that can be told apart; no resale.
Third degree: MR = MC in each market; the less elastic market pays more.
Mission 5
A natural monopoly has falling average cost across the whole market, so one firm supplies most cheaply.
Unregulated, it sets MR = MC; P = AC gives normal profit; P = MC is efficient but loss-making.
Regulators use price caps (RPI − X), profit limits, quality and performance targets; owners may be public or private.
🏆
Mini-lesson complete!
⭐⭐⭐
You've worked through Market structures (part 2) for Eduqas A-level Economics. 🎉
Mission 1When a product is very profitable and anyone can start selling it, where do the profits go?
Mission 2If one company controls a whole market, why doesn't it just charge the highest price it can?
Mission 3Why can a popular new kind of café make big profits at first, then only just cover its costs later?
Mission 4Why can two people sitting side by side on the same train have paid very different fares?
Mission 5Why might it make sense for only one company to lay the water pipes in a city?
Your stars: 0 / 0
📣 Smashed it? Share your score
Challenge a friend to beat your stars, or show a parent how you got on.