← AP Chemistry
⭐ 0
AP Chemistry · Unit 5: Kinetics
Mini-Lesson

AP® Chemistry Unit 5: Kinetics (Part 1)

4 missions. Guess, learn, then check. Your place is saved.

Covers College Board topics 5.1, 5.2, 5.5, 5.6, 5.10, 5.11

Short, curiosity-driven missions (about 20 minutes each) that teachers can assign. Use them alongside AP Classroom practice.

  1. Mission 1A speed camera clocks a car at one instant. How do you clock a reaction at one instant?
  2. Mission 2Why can a cloud of flour dust explode, when a heap of flour only smolders?
  3. Mission 3Hydrogen peroxide sits in a bottle for months, yet fizzes at once on a slice of raw potato. Why?
  4. Mission 4Double one reactant and the rate quadruples; double another and nothing happens. What does that tell you?

AP® is a trademark registered by the College Board, which is not affiliated with, and does not endorse, this website.

Mission 1Topics 5.1, 5.2

Mission 1: A speed camera clocks a car at one instant. How do you clock a reaction at one instant?

Make a guess: A speed camera clocks a car at one instant. How do you clock a reaction at one instant?

Mission 1

What rate means

  • Rate of reaction: the change in concentration of a reactant or product per unit time.
  • Units: M/s (mol/(L·s)). Rate = amount of reactant converted to product per unit time.
  • Reactant concentrations fall; product concentrations rise. Rate is quoted as a positive value.
  • Other measured quantities work too: gas volume per second, mass lost per second.
Mission 1

Rates follow the equation

  • N2(g) + 3 H2(g) → 2 NH3(g).
  • In any interval, 3 mol H2 react for each 1 mol N2, and 2 mol NH3 form.
  • So [H2] falls 3 times as fast as [N2], and [NH3] rises 2 times as fast as [N2] falls.
  • Rate of reaction = −Δ[N2]/Δt = −⅓ Δ[H2]/Δt = ½ Δ[NH3]/Δt.
Quick check
?Nitrogen and hydrogen react according to the equation N2(g) + 3 H2(g) → 2 NH3(g). Which statement correctly relates the rates at which the concentrations change while the reaction proceeds?
Mission 1

Following a reaction as it happens

Three ways to follow a reaction1 Gas volume0204060mLgas syringe2 Mass lossCO2 outgcotton plug:CO2 escapes,acid sprayis stopped3 Color: spectrophotometerlampfiltercuvettedetector
  • Gas volume: collect the gas in a gas syringe; read the volume at set times.
  • Mass loss: a gas escapes from a flask on a balance, e.g. CO2 from marble chips and acid.
  • Color: a colored reactant or product is followed with a colorimeter.
  • A spectrophotometer measures absorbance, which is proportional to the concentration of the colored species.
  • These are continuous monitoring methods: many readings from one run.
  • Change one variable; keep everything else the same.
Quick check
?Aqueous bromine, Br2(aq), is reddish-brown. It reacts with formic acid according to the equation Br2(aq) + HCOOH(aq) → 2 Br⁻(aq) + 2 H⁺(aq) + CO2(g), and all of the other species are colorless. A student wants to determine the rate of the reaction at several different times during a single trial. Which procedure would provide the data needed?
Mission 1

Average rate or rate at an instant

Average rate and rate at an instant on a product-time curveAmount of productTimePinitial raterate at Paverage rate
  • Average rate = total change ÷ total time: the slope of a straight line between two points.
  • Rate at an instant = slope of the tangent to the curve at that time.
  • Initial rate: the tangent at t = 0, where the curve is steepest.
  • The curve flattens as reactants are used up: the rate falls.
Mission 1

Worked example: drawing a tangent

Worked tangent: mass of CO2 lost against time01002003000.00.51.01.52.0Mass of CO2 lost (g)Time (s)PΔx = 120 sΔy = 1.46 g2.00 gP on the curve = (60 s, 1.19 g)tangent: (0 s, 0.46 g) to (120 s, 1.92 g)slope = 1.46 ÷ 120 = 0.0122 g s−1
  • Marble chips + acid: mass of CO2 lost against time. At 60 s, 1.19 g has been lost.
  • Draw the tangent at 60 s. It passes through (0 s, 0.46 g) and (120 s, 1.92 g).
  • Rate = (1.92 − 0.46) g ÷ (120 − 0) s = 1.46 ÷ 120 = 0.0122 g/s.
  • Average over the first 60 s: 1.19 ÷ 60 = 0.0198: larger, because the reaction was faster early on.
  • Read two far-apart points on the tangent, not on the curve.
Quick check
Graph of [A] (M) against Time (s). The vertical axis is marked 0, 0.30, 0.60, 0.90, 1.20 and the horizontal axis 0, 10, 0.300.600.901.2000102030405060Time (s)[A] (M)
?A hypothetical gas, A, decomposes in a rigid container at constant temperature. The graph shows [A] as a function of time. The dashed line is the tangent to the curve at time 0. Based on the graph, what is the initial rate of disappearance of A?
Calculate
?Bromine reacts with formic acid: Br2(aq) + HCOOH(aq) → 2HBr(aq) + CO2(g). A graph of [Br2] against time starts at 0.0130 and curves downward, passing through (80 s, 0.0087). A tangent drawn at t = 80 s passes through (0 s, 0.0122) and meets the time axis at 280 s.
  • Concentrations in M. Calculate the rate at t = 80 s, in units of 10⁻⁵ M/s.
Mission check

?Hydrogen peroxide decomposes on a catalyst, and the oxygen is collected in a gas syringe. The volume–time curve passes through (30 s, 41.9). The tangent drawn at t = 30 s passes through (0 s, 20.2) and (60 s, 63.6). At 60 s the curve itself reads 54.6. What is the rate of reaction at exactly t = 30 s?
  • Volumes in mL; rates in mL/s.
Mission 2Topics 5.1, 5.5

Mission 2: Why can a cloud of flour dust explode, when a heap of flour only smolders?

Make a guess: Why can a cloud of flour dust explode, when a heap of flour only smolders?

Mission 2

Collision theory

Collision theory: energy and orientationGentle collisionXYZXYZbounce apartXYZE < Ea: no reactionHard collisionXYZXYZbonds rearrangeXYZE ≥ Ea: reactionH end firstHδ+Clδ−reactsCl end firstClδ−Hδ+no reactionenough energy in both collisions:only the first orientation reacts
  • Particles must collide to react. The collision starts the breaking and making of bonds.
  • The collision needs energy at least equal to the activation energy, Ea.
  • It also needs a suitable orientation: in HCl + C2H4, the H end of HCl must meet the C=C bond.
  • Only a small fraction of collisions succeed: most lack enough energy or the right orientation.
Quick check
Diagram of two collisions. Each shows a molecule drawn as a circle X bonded to a circle Y, and a separate atom Z (dashedCollision 1XYZCollision energy: slightly greater than EₐCollision 2XYZCollision energy: much greater than Eₐ
?The hypothetical elementary reaction X–Y(g) + Z(g) → X(g) + Y–Z(g) occurs in the gas phase. The diagram shows two collisions between an X–Y molecule and a Z atom, with the energy of each collision compared with the activation energy, Eₐ. Which prediction about the two collisions is correct?
Mission 2

Concentration, pressure, surface area

What changes the collision frequencyHigher concentrationlowhighHigher gas pressurelarge volumesmall volumeLarger surface areaone lumpsame mass, small pieces
  • Higher concentration: more particles per unit volume → more frequent collisions.
  • Higher gas pressure: the same particles are squeezed closer → more frequent collisions.
  • Larger surface area of a solid: more particles exposed → more frequent collisions.
  • These change how often particles collide, not the energy of each collision.
  • So more successful collisions per second: a faster rate.
Quick check
Two beakers, each containing an identical strip of magnesium. The left beaker is labeled 50 mL of 2.0 M HCl; the right b50 mL of 2.0 M HCl100 mL of 1.0 M HCl++++++++++++Mg atomH₃O⁺ ion(Cl⁻ and H₂O not shown)
?Identical strips of magnesium are placed in the two samples of HCl(aq) shown, at the same temperature. Each box in the figure shows an equal small volume of solution next to the metal surface. Which claim about the initial rate of H2(g) production, with its reasoning, is correct?
Mission 2

Temperature

  • Higher temperature: particles move faster, with more kinetic energy.
  • Main effect: a much larger fraction of collisions have energy ≥ Ea.
  • Smaller effect: collisions are also a little more frequent.
  • So a small rise in temperature can give a large rise in rate.
  • A later mission shows this on the Maxwell–Boltzmann distribution.
Mission 2

Catalysts

Energy profile with and without a catalystEnergyReaction coordinateEaEa(cat)ΔHReactantsProductsno catalystwith catalyst
  • A catalyst increases the rate of a reaction without being used up overall.
  • It provides an alternative route with a lower activation energy.
  • So, at the same temperature, more collisions have E ≥ Ea. ΔH is unchanged.
  • Some catalysts also hold reactants in a better orientation: more effective collisions.
Quick check
?When a small amount of solid MnO2 is added to a solution of hydrogen peroxide, H2O2(aq), bubbles of O2(g) form rapidly as the H2O2 decomposes into H2O and O2. MnO2 acts as a catalyst. Which statement about the MnO2 is correct?
Mission 2

Frequency or energy?

ChangeCollisions per secondFraction with E ≥ Ea
Higher concentrationmoresame
Higher gas pressuremoresame
Larger surface areamoresame
Higher temperaturea few moremany more
Catalyst addedsamemore (lower Ea)
  • Rate depends on the number of successful collisions per second.
Mission check

?An iron nail held in a Bunsen flame only glows. The same mass of fine iron filings sprinkled into the flame burns in bright sparks. Why do the filings react so much faster with oxygen?
Mission 3Topics 5.5, 5.6, 5.10, 5.11

Mission 3: Hydrogen peroxide sits in a bottle for months, yet fizzes at once on a slice of raw potato. Why?

Make a guess: Hydrogen peroxide sits in a bottle for months, yet fizzes at once on a slice of raw potato. Why?

Mission 3

Energy profiles

Energy profiles: exothermic and endothermic reactionsEnergyReaction coordinateExothermicEaΔH < 0ReactantsProductstransition stateEnergyReaction coordinateEndothermicEaΔH > 0ReactantsProductstransition stateEnergyReaction coordinateTwo steps, exothermicEaoverallΔH < 0ReactantsProductstransition statetransition stateintermediate
  • Energy (y) against the reaction coordinate (x): how far the atoms have rearranged.
  • Activation energy, Ea: from the reactants up to the top of the barrier.
  • ΔH: from reactants to products. Products lower: exothermic. Products higher: endothermic.
  • Ea is always positive, even for an exothermic reaction.
  • The top is the transition state: bonds partly broken and partly formed.
Mission 3

Several steps; kinetic control

Energy profiles: exothermic and endothermic reactionsEnergyReaction coordinateExothermicEaΔH < 0ReactantsProductstransition stateEnergyReaction coordinateEndothermicEaΔH > 0ReactantsProductstransition stateEnergyReaction coordinateTwo steps, exothermicEaoverallΔH < 0ReactantsProductstransition statetransition stateintermediate
  • A multistep reaction has one peak (transition state) per step.
  • An intermediate sits in the dip between two peaks.
  • Overall ΔH runs from the first reactants to the final products.
  • A thermodynamically favored reaction can still be very slow if Ea is high.
  • Example: methane and oxygen in air do not react until a spark is supplied. This is kinetic control.
Quick check
?A reaction energy profile for an elementary reaction plots energy against the reaction coordinate. What does the reaction coordinate represent?
Mission 3

The Maxwell–Boltzmann distribution

Maxwell-Boltzmann distribution at one temperatureNumber of particlesKinetic energyEamost likely energyparticles withE ≥ Eathe tail never reaches the axis
  • Gas particles are in constant, random motion, with a range of kinetic energies (or speeds) at any temperature.
  • y: number of molecules with a given energy. x: energy.
  • Starts at the origin: no molecule has zero energy. Rises to a peak, the most likely energy.
  • Long tail that never reaches the energy axis.
  • Area under the curve = total number of molecules. Area beyond Ea = molecules that can react.
Mission 3

Two temperatures

Maxwell-Boltzmann distributions at two temperaturesNumber of particlesKinetic energyEaT1T2T2 > T1equal areas underthe two curvesshaded: particles with E ≥ Ea
  • Hotter sample: peak lower and further right; the curve is broader.
  • Total area unchanged: same number of molecules.
  • Area beyond Ea is much larger: a much bigger fraction of collisions can succeed.
  • Ea does not change with temperature.
  • So a small temperature rise gives a large rate rise: near room temperature, +10 °C often roughly doubles the rate.
  • The Arrhenius equation links k to Ea and T: the larger Ea, the more strongly the rate depends on temperature.
Quick check
?A student plans to measure the initial rate of a hypothetical elementary reaction that releases heat and has a large activation energy, Eₐ. Trials will be run at 300 K and at 310 K with the same initial concentrations. The student calculates that the 10 K rise increases the frequency of collisions between reactant molecules by only about 2%. Which prediction about the measured rates is consistent with the collision model?
Mission 3

Catalysts on an energy profile

Energy profiles with and without a catalystEnergyReaction coordinateExothermicEaEa(cat)ΔHEa(reverse)ReactantsProductsEnergyReaction coordinateEndothermicEaEa(cat)ΔHReactantsProductsno catalystwith catalyst
  • A catalyst provides an alternative route with a lower Ea. It is not used up.
  • Reactant and product energies are unchanged, so ΔH is unchanged.
  • A catalyzed route may have more steps, each with a lower peak. Some catalysts instead raise the number of effective collisions, e.g. by holding reactants in a good orientation.
  • Enzymes are biological catalysts. Raw potato contains catalase, which catalyzes 2H2O2 → 2H2O + O2.
Mission 3

The reverse reaction's barrier

Energy profiles with and without a catalystEnergyReaction coordinateExothermicEaEa(cat)ΔHEa(reverse)ReactantsProductsEnergyReaction coordinateEndothermicEaEa(cat)ΔHReactantsProductsno catalystwith catalyst
  • The reverse reaction starts from the products: its Ea runs from the products up to the peak.
  • Read it off the profile. As a check: Ea(reverse) = Ea(forward) − ΔH.
  • Example: Ea(forward) = 60 kJ/mol, ΔH = −90 kJ/mol, so Ea(reverse) = 60 + 90 = 150 kJ/mol.
  • A catalyst lowers Ea(forward) and Ea(reverse) by the same amount.
Mission 3

A catalyst on the Maxwell–Boltzmann curve

A catalyst on the Maxwell-Boltzmann curveNumber of particlesKinetic energyEa(catalyzed)Ea(uncatalyzed)enough energy without a catalystextra, enough energy with a catalystsame temperature, same curve
  • Same temperature, so the same curve.
  • Mark a second, lower Ea(catalyzed), to the left of Ea(uncatalyzed).
  • The area beyond Ea(catalyzed) is larger: more molecules have enough energy.
  • The molecules have no extra energy; the barrier is lower.
Quick check
Maxwell–Boltzmann distribution: Number of particles on the vertical axis against Kinetic energy on the horizontal axis, PQKinetic energyNumber of particles
?The graph shows the distribution of the kinetic energies of the reactant particles in a gas mixture at a constant temperature. Lines P and Q mark the activation energies of the reaction with a catalyst and without a catalyst, not necessarily in that order. When the catalyst is present, which particles have enough energy to react by the catalyzed path?
Mission check

?A mixture of hydrogen and oxygen can stay unchanged at room temperature for years. In Döbereiner's lamp (1823), a jet of hydrogen in air strikes a piece of platinum and reacts at once, with no flame or spark to start it. Which explanation is correct?
Mission 4Topic 5.2

Mission 4: Double one reactant and the rate quadruples; double another and nothing happens. What does that tell you?

Make a guess: Double one reactant and the rate quadruples; double another and nothing happens. What does that tell you?

Mission 4

The rate law

  • Rate law: rate = k[A]ᵐ[B]ⁿ.
  • Order with respect to a reactant: the power of its concentration. Here m and n.
  • Overall order = m + n.
  • Rate constant, k: the proportionality constant in the rate law.
  • Orders are found by experiment. They need not match the coefficients in the equation.
Mission 4

What each order does

Order with respect to A[A] × 2 → rate ×[A] × 3 → rate ×
011
123
249
  • Factor on the rate = (factor on concentration)^order.
  • Two concentrations changed together: multiply their factors. Never add.
  • The hook: ×2 gives ×4, so second order; ×2 gives ×1, so zero order. Rate = k[A]².
Quick check
?A hypothetical reaction is second order with respect to reactant A and first order with respect to reactant B. In a second trial at the same temperature, [A] is 4 times as great and [B] is 3 times as great as in the first trial. By what factor is the initial rate in the second trial greater than the initial rate in the first trial?
Mission 4

Worked example: orders from initial rates

X + Y → Z, at constant temperature:

Experiment[X][Y]Initial rate
10.0100.0103.0 × 10⁻⁵
20.0300.0109.0 × 10⁻⁵
30.0300.0201.8 × 10⁻⁴
  • Concentrations in M; rates in M/s.
  • Compare experiments where only one concentration changes.
  • 1 → 2: [X] × 3, rate × 3. First order in X.
  • 2 → 3: [Y] × 2, rate × 2. First order in Y.
  • Rate = k[X][Y]: second order overall.
Mission 4

Units of k

  • k = rate ÷ (concentration terms). Find its units by canceling, not memorizing.
  • Second order: (M/s) ÷ M² = M⁻¹ s⁻¹.
  • Zero: M/s. First: s⁻¹. Third: M⁻² s⁻¹.
  • k changes with temperature, not with concentration.
Quick check
Data table with four columns: Trial, [X] (M), [Y] (M) and Initial rate (M/s). Trial 1: [X] 0.20, [Y] 0.50, rate 1.0 × Trial123[X] (M)0.200.600.20[Y] (M)0.500.501.50Initial rate(M/s)1.0 × 10⁻³9.0 × 10⁻³3.0 × 10⁻³
?The table shows initial-rate data for the hypothetical reaction X(g) + 2 Y(g) → Z(g) at a constant temperature. What is the value of the rate constant, k, for the reaction at this temperature?
| Trial | [X] (M) | [Y] (M) | Initial rate (M/s) |
| --- | --- | --- | --- |
| 1 | 0.20 | 0.50 | 1.0 × 10⁻³ |
| 2 | 0.60 | 0.50 | 9.0 × 10⁻³ |
| 3 | 0.20 | 1.50 | 3.0 × 10⁻³ |
Calculate
?Use experiment 2 from the earlier screen ([X] = 0.030, [Y] = 0.010, rate = 9.0 × 10⁻⁵) and rate = k[X][Y]. Calculate k.
  • Give k in M⁻¹ s⁻¹.
M⁻¹ s⁻¹
Quick check
?For another reaction, X + Y → products, at constant temperature:
| Experiment | [X] | [Y] | Initial rate |
| --- | --- | --- | --- |
| 1 | 0.10 | 0.10 | 4.0 × 10⁻⁴ |
| 2 | 0.20 | 0.10 | 8.0 × 10⁻⁴ |
| 3 | 0.20 | 0.30 | 7.2 × 10⁻³ |
Which rate law fits the data?
  • Concentrations in M; rates in M/s.
Mission check

?2-Bromo-2-methylpropane is hydrolyzed by hydroxide ions: (CH3)3CBr + OH⁻ → (CH3)3COH + Br⁻. Initial rates at constant temperature:
| Experiment | [(CH3)3CBr] | [OH⁻] | Initial rate |
| --- | --- | --- | --- |
| 1 | 0.10 | 0.10 | 1.5 × 10⁻⁴ |
| 2 | 0.20 | 0.10 | 3.0 × 10⁻⁴ |
| 3 | 0.20 | 0.30 | 3.0 × 10⁻⁴ |
  • Concentrations in M; rates in M/s. Predict the initial rate when [(CH3)3CBr] = 0.050 M and [OH⁻] = 0.20 M.
Recap

The big ideas

Mission 1

  • Rate = change in concentration (or volume, or mass) per unit time.
  • The rate at one instant is the slope of the tangent at that time; the initial rate is the tangent at t = 0.

Mission 2

  • A reaction needs collisions with energy ≥ Ea; most collisions fail.
  • Successful collisions also need a suitable orientation.
  • Concentration, pressure and surface area raise collision frequency; temperature mainly raises the fraction with E ≥ Ea; a catalyst lowers Ea.

Mission 3

  • Maxwell–Boltzmann: heating spreads the curve (same area, lower peak, further right), so far more molecules have E ≥ Ea.
  • A catalyst lowers Ea by an alternative route: same curve, Ea line moves left; ΔH unchanged.
  • Ea(reverse) = Ea(forward) − ΔH.

Mission 4

  • Rate = k[A]ᵐ[B]ⁿ; orders come from experiment, not from the balanced equation.
  • Factor on rate = (factor on concentration)^order; units of k by canceling.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Kinetics for AP Chemistry. 🎉

  1. Mission 1A speed camera clocks a car at one instant. How do you clock a reaction at one instant?
  2. Mission 2Why can a cloud of flour dust explode, when a heap of flour only smolders?
  3. Mission 3Hydrogen peroxide sits in a bottle for months, yet fizzes at once on a slice of raw potato. Why?
  4. Mission 4Double one reactant and the rate quadruples; double another and nothing happens. What does that tell you?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to AP Chemistry