← AP Chemistry
⭐ 0
AP Chemistry · Unit 2: Compound Structure and Properties
Mini-Lesson

AP® Chemistry Unit 2: Compound Structure and Properties

6 missions. Guess, learn, then check. Your place is saved.

Covers College Board topics 2.1–2.7

Short, curiosity-driven missions (about 20 minutes each) that teachers can assign. Use them alongside AP Classroom practice.

  1. Mission 1Salt is made of charged particles. So why doesn't a salt crystal conduct electricity?
  2. Mission 2Air is 78% nitrogen. Why does almost nothing react with it?
  3. Mission 3Tin conducts electricity. So why doesn't liquid tin(IV) chloride conduct at all?
  4. Mission 4Water and carbon dioxide both have three atoms. Why is one bent and the other straight?
  5. Mission 5A double bond shares twice as many electrons as a single bond. So why isn't it twice as strong?
  6. Mission 6Spearmint and caraway get their smells from mirror-image molecules. How can your nose tell them apart?

AP® is a trademark registered by the College Board, which is not affiliated with, and does not endorse, this website.

Mission 1Topics 2.1–2.3

Mission 1: Salt is made of charged particles. So why doesn't a salt crystal conduct electricity?

Make a guess: Salt is made of charged particles. So why doesn't a salt crystal conduct electricity?

Mission 1

Which ions atoms form

Ions from atoms12+12+Mg (2,8,2)12 p, 12 e⁻Mg²⁺ (2,8)12 p, 10 e⁻lose 2 e⁻7+7+N (2,5)7 p, 7 e⁻N³⁻ (2,8)7 p, 10 e⁻gain 3 e⁻Both ions have 10 electrons,the same arrangement as neon.
  • Metal atoms lose electrons: positive ions, cations.
  • Nonmetal atoms gain electrons: negative ions, anions.
  • Groups 1, 2 and 13 (3 in older numbering) lose all outer electrons: 1+, 2+, 3+.
  • Groups 15, 16 and 17 (5, 6, 7) gain enough to fill the outer shell: 3−, 2−, 1−.
  • Mg (2,8,2) loses two: Mg²⁺. N (2,5) gains three: N³⁻. Both now have neon's arrangement.
  • Charge = protons − electrons. The number of protons never changes.
  • Whether two elements bond, and how, depends on how their nuclei attract valence electrons.
Quick check
?A metal M in group 2 forms an ionic chloride that is 63.9% chlorine by mass. Based on the typical charges of the ions, what is the molar mass of M?
Mission 1

Ionic bonds and formulae

  • Ionic bonding: strong electrostatic attraction between oppositely charged ions.
  • It acts in all directions: each ion attracts every oppositely charged neighbor.
  • A metal with a nonmetal is generally ionic, but the properties are the best test of bonding type.
  • Formula: total charge zero. Mg²⁺ and N³⁻ → Mg3N2.
  • Name: cation first, then the anion ending -ide: magnesium nitride.
  • Roman numerals give a metal's charge: Fe³⁺ with O²⁻ is iron(III) oxide, Fe2O3.
  • The formula gives one formula unit: the simplest ratio of ions.
Mission 1

Compound ions to know

IonFormula
sulfateSO4²⁻
hydroxideOH⁻
nitrateNO3⁻
carbonateCO3²⁻
ammoniumNH4⁺
  • Keep each compound ion whole. Brackets for more than one: Ca(NO3)2, (NH4)2SO4.
Quick check
?Which formula is correct?
Mission 1

The giant ionic lattice

Ionic latticeGiant lattice;formula = ratio of ionscationsanions
  • Ionic compounds form a giant lattice: a regular 3-D array of alternating cations and anions.
  • The array maximizes attractions between opposite charges and minimizes repulsions between like ones.
  • There are no molecules. Al2O3 means 2 Al³⁺ for every 3 O²⁻.
Mission 1

Properties from the lattice

  • High melting point, very low volatility: every ion is held by many strong attractions.
  • Very low vapor pressure for the same reason.
  • Brittle: a blow shifts a layer, like charges meet, they repel, and the crystal splits.
  • Conducts only when molten or in solution: then the ions are free to move and carry charge.
  • Solid: no conduction. The ions are fixed in the lattice, and there are no free electrons.
  • Often soluble in water: polar water molecules attract the ions out of the lattice.
  • Dissolving breaks ionic attractions and forms ion–dipole attractions, so it can be argued as physical or chemical.
Quick check
?A student uses a conductivity tester on three samples of potassium chloride: KCl(s) at room temperature, KCl(l) above its melting point, and KCl(aq) made with distilled water. Which result should the student predict?
Mission 1

How strongly a lattice holds together

Ion charge, size and attraction1+1−1+ and 1−r: center to center2+2−2+ and 2−r: center to centerlarger ionssmaller ionslonger distanceshorter distancestronger attraction,higher melting pointF ∝ q₁q₂ / r²
  • The attraction is stronger when ions have larger charges and smaller radii (centers closer).
  • Coulomb's law: force ∝ q1q2 / r², with r the distance between ion centers.
  • Same charges, size decides: NaF melts at 993 °C, NaCl 801 °C, KCl 770 °C.
  • Double both charges, with ions about the size of NaF's: MgO (Mg²⁺, O²⁻) melts at about 2850 °C.
Quick check
?A student plans to measure the melting points of solid KF and solid KBr. Which prediction of the result, with its justification, is correct?
Mission check

?In a kettle's heating element, the hot metal wire is packed in powdered magnesium oxide, MgO, inside a metal tube. MgO is ionic, yet it is used here as an electrical insulator. Why doesn't it conduct?
Mission 2Topics 2.2, 2.5, 2.6

Mission 2: Air is 78% nitrogen. Why does almost nothing react with it?

Make a guess: Air is 78% nitrogen. Why does almost nothing react with it?

Mission 2

What a covalent bond is

Covalent bond++attractattractrepelrepelshared pairBoth nuclei attract the shared pair.The two nuclei repel each other.Bond length: attraction = repulsion.
  • Covalent bond: the strong electrostatic attraction between a shared pair of electrons and the nuclei of the two bonded atoms.
  • The pair sits between the nuclei; both pull on it, holding the atoms together.
  • Too close, and the two nuclei repel: the bond length is where attraction and repulsion balance.
  • Lone pair: a pair of outer electrons not used in bonding.
  • Octet rule: atoms tend to end up with eight outer electrons. A tendency, not a law.
Mission 2

Drawing the electrons

Lewis diagrams of CO2, N2 and the hydroxide ionOOCCO₂16 valence e⁻NNN₂10 valence e⁻OH−[O–H]⁻8 valence e⁻
  • A Lewis diagram shows every valence electron: bonding pairs as lines, lone pairs as dots.
  • 1. Count the outer electrons. Add one per negative charge; remove one per positive charge.
  • 2. Join the atoms by single bonds. 3. Complete the outer atoms' octets with lone pairs.
  • 4. Spare electrons go on the central atom. Too few? Share more pairs: multiple bonds.
  • CO2: 16 outer electrons. O=C=O, two lone pairs on each O.
  • N2: 10 outer electrons. N≡N, one lone pair on each N.
  • An ion goes in square brackets, charge outside: [O–H]⁻, three lone pairs on O.
Mission 2

Fewer than eight, or more

Incomplete octets, an odd-electron molecule and an expanded octetBFFFBeClClBF₃B has 6 e⁻BeCl₂Be has 4 e⁻NONO11 valence e⁻N has 7SFFFFFFSF₆S has 12 e⁻
  • The octet rule has limitations.
  • BF3: boron's three outer electrons make three bonds. B has only 6.
  • BeCl2: beryllium has only 4.
  • Odd-electron species: NO has 11 valence electrons, so one atom must have fewer than eight.
  • Atoms from period 3 on can hold more than eight: SF6 has 12 around S.
Quick check
?Nitrogen monoxide, NO, is a gas whose molecules have a total of 11 valence electrons. Which statement best describes how well the Lewis structure model, with its octet rule, represents NO?
Quick check
?Which describes a correct Lewis diagram for the cyanide ion, CN⁻?
Mission 2

Single, double, triple

Single, double and triple carbon-carbon bondsBond length / pmC–C154C=C134C≡C120Average bond energy / kJ/molC–C346C=C614C≡C839More shared pairs: shorter, stronger
  • Single, double and triple bonds share one, two and three pairs.
  • More shared pairs pull the nuclei closer: the bond is shorter and stronger.
BondShared pairsLength / pmMean (average) bond enthalpy / kJ/mol
C–C1154346
C=C2134614
C≡C3120839
  • These are average bond energies, in kJ/mol. Bond length also grows with atom size: H–Cl < H–Br < H–I.
Mission 2

Energy and distance

Potential energy against internuclear distancepotential energyinternuclear distance0bond lengthbondenergysingle bondtriple bond
  • Plot potential energy against the distance between two nuclei.
  • Far apart: no interaction, energy zero.
  • Closer: both nuclei attract both electrons. Energy falls.
  • Too close: nucleus–nucleus repulsion. Energy rises steeply.
  • The minimum sits at the bond length. Its depth below zero is the bond energy.
  • A triple bond: a deeper well at a shorter distance.
Quick check
?On a graph of potential energy versus internuclear distance for two atoms that form a diatomic molecule, which quantity is the bond energy of the molecule?
Mission 2

One atom supplies both electrons

Lone pair from oxygen to H+OHHH₂O+H⁺OHHH+[H₃O]⁺New O–H bond: both electrons from OAll three O–H bonds are identical
  • Sometimes one atom supplies both electrons of a shared pair.
  • The donor has a lone pair. The acceptor has room for a pair.
  • H2O + H⁺ → H3O⁺: an O lone pair goes to H⁺. NH3 + H⁺ → NH4⁺ forms the same way.
  • Once formed, it is identical to the others: all three O–H bonds in H3O⁺ match.
Mission check

?Hydrogen cyanide, H–C≡N, has a carbon–nitrogen triple bond. Methylamine, CH3–NH2, has a carbon–nitrogen single bond. How does the C≡N bond compare with the C–N bond?
Mission 3Topics 2.1, 2.4

Mission 3: Tin conducts electricity. So why doesn't liquid tin(IV) chloride conduct at all?

Make a guess: Tin conducts electricity. So why doesn't liquid tin(IV) chloride conduct at all?

Mission 3

The metallic bond

Metallic bonding in magnesium2+2+2+2+2+2+2+2+2+2+2+2+2+Mg²⁺ iondelocalized e⁻2 delocalized electrons per Mg²⁺24 e⁻ and 12 Mg²⁺ here: neutral
  • Metal atoms release their outer electrons into a shared pool of delocalized electrons.
  • Metallic bonding: cations in a sea of delocalized electrons, not tied to any one atom.
  • The ions form a regular giant metallic lattice.
  • Bonding is non-directional: each ion attracts the electrons all around it.
Mission 3

Why metals conduct and bend

A metal bends, an ionic crystal cracksMetal: a layer of ions slides++++++++++++++++++++++++beforeafterions still surrounded by electronsIonic: the same slide+−+−−+−++−+−+−+−−+−++−+−beforeafterlike charges meet and repel:the crystal cracks
  • Electrical conductivity: delocalized electrons drift when a voltage is applied. The ions stay put.
  • Thermal conductivity: delocalized electrons carry kinetic energy quickly through the metal.
  • Malleable (hammered into shape) and ductile (drawn into wires): layers of ions slide.
  • After sliding, every ion is still surrounded by delocalized electrons: the bonding is not broken.
  • An ionic lattice is different: a shift brings like charges together. They repel and the crystal shatters.
Quick check
Two particulate diagrams labeled Before and After. Before: a square array of four rows of four identical circles, each mBeforeAfter+++++++++++++++++++++++++++++++++force= metal core= mobile valence electrons
?The diagram represents part of a metallic solid before and after a force shifts the upper layers. Which statement best explains why the metal stays in its new shape instead of breaking apart?
Mission 3

What makes metallic bonding stronger

  • Stronger with a higher ion charge and a smaller ion.
  • More delocalized electrons per ion, packed closer to each ion's center: stronger attraction.
  • Na⁺ → Mg²⁺ → Al³⁺: melting point 98 °C → 650 °C → 660 °C.
  • Down group 1 the ions get larger: Li 181 °C, Na 98 °C, K 63 °C.
  • Mass does not decide: heavier potassium melts lower than lithium.
Mission 3

Alloys

Alloy layersPure metalAlloy+++++++++++++++++++++++++++++++++++++identical ions,regular layersa few larger atomsdisrupt the layerslayers slidesliding blockedshaded: electron sea
  • An alloy is a mixture of a metal with other elements: brass (copper, zinc), steel (iron, carbon).
  • Metallic bonding is non-directional, so other atoms fit into the lattice. The alloy still conducts.
  • Atoms of a different size disrupt the layers, so they slide less easily.
  • So alloys are usually harder and stronger than the pure metal.
Mission 3

Interstitial and substitutional alloys

Interstitial and substitutional alloysInterstitialSubstitutionalFe 126 pmC 77 pmCu 128 pmZn 134 pmsmall atoms in the gapsatoms swap placesradii drawn to scaleshaded: sea of mobile electrons
  • Interstitial alloy: atoms of significantly different radii. The small atoms fill the spaces (interstices) between the large ones.
  • Example: steel. C atoms (77 pm) sit between Fe atoms (126 pm).
  • Interstitial atoms make the lattice more rigid: less malleable, less ductile.
  • Substitutional alloy: atoms of comparable radius. One atom takes the place of another in the lattice.
  • Example: brass. Zn atoms (134 pm) replace some Cu atoms (128 pm).
  • Both kinds keep a sea of mobile electrons, so they still conduct.
Quick check
Table with columns Element, Atomic radius (pm) and Molar mass (g/mol). Fe: atomic radius 126 pm, molar mass 55.85 g/mol.ElementAtomicradius (pm)Molar mass(g/mol)Fe12655.85C7712.01
?The table gives data for iron and carbon. Steel is an alloy of iron that contains a small amount of carbon. Based on the data, which statement correctly describes the arrangement of atoms in steel, with a valid reason?
Mission 3

Four types of structure

Four types of structure+−+−+−+−+IonicNa⁺ and Cl⁻ ionsionic bonds2+2+2+2+2+2+2+2+2+MetallicMg²⁺ ions in a seaof delocalized e⁻metallic bondsCovalent networkC atomscovalent bondsthroughoutMolecularI₂ moleculesweak forces betweenmolecules
  • Four types of solid: ionic, metallic, covalent network and molecular.
  • Identify the particles and the forces between them. The properties follow.
Mission 3

Molecular solids

  • Molecular solids: separate molecules attracted by weak intermolecular forces.
  • Low melting points: only those weak forces are overcome. The covalent bonds stay intact.
  • Do not conduct: valence electrons are held in bonds and lone pairs within each molecule.
  • Some are made of very large molecules or polymers, e.g. polyethylene.
Mission 3

Properties: what conducts, and when

StructureMelting pointConducts as solidConducts as liquidIn water
Giant ionichighno: ions fixedyes: ions moveoften soluble; solution conducts
Giant metallicusually highyesyesinsoluble (some react)
Giant covalentvery highno (graphite yes)noinsoluble
Simple molecularlownonopolar ones may dissolve; solution usually does not conduct†
  • †Unless the substance reacts with water to form ions, e.g. HCl(g) → H⁺(aq) + Cl⁻(aq).
  • To conduct, a substance needs mobile charged particles: delocalized electrons, or ions free to move.
Quick check
?Four solids, P, Q, R and S, are tested.
Which pairing of substance and structure is correct?
  • P: melts at 801 °C; conducts when molten but not as a solid; dissolves in water.
  • Q: melts at 1085 °C; conducts as a solid and when molten; insoluble in water.
  • R: melts at 114 °C; does not conduct as a solid or when molten; insoluble in water.
  • S: melts at 1710 °C; does not conduct as a solid or when molten; insoluble in water.
Mission 3

Bonding is a continuum

Bonding triangle1.01.52.02.53.03.54.000.51.01.52.02.53.0ElectronegativitydifferenceAverage electronegativityIonicPolarcovalentCovalentMetallicNaClSnCl₄region boundaries are approximate
  • Ionic, covalent and metallic are models. Real bonds usually lie in between.
  • Bigger electronegativity difference: more ionic character. Smaller difference: more covalent.
  • Background (not examined on any course here): the bonding triangle plots average electronegativity (x) against difference (y). Corners: metallic, ionic, covalent.
  • NaCl: average 2.05, difference 2.3: near the ionic corner. High melting point, conducts when molten.
  • SnCl4: average 2.6, difference 1.2: polar covalent. Small molecules: liquid, no ions, no conduction.
Mission check

?Each liquid is tested with two electrodes and a bulb. Which liquid will not conduct electricity?
Mission 4Topic 2.7

Mission 4: Water and carbon dioxide both have three atoms. Why is one bent and the other straight?

Make a guess: Water and carbon dioxide both have three atoms. Why is one bent and the other straight?

Mission 4

Electron pairs repel

Basic arrangements of electron domainsBeCl₂2 electron domainslinear180°BCl₃3 electron domainstrigonal planar120°CH₄4 electron domainstetrahedral109.5°BeClClBClClClCHHHH
  • Count the electron domains around the central atom: each bond (single, double or triple) or lone pair is one domain.
  • They repel, so they get as far apart as possible: VSEPR (valence shell electron pair repulsion).
  • 2 domains: linear, 180°. 3: trigonal planar, 120°. 4: tetrahedral, 109.5°.
  • BeCl2 is linear, BCl3 trigonal planar, CH4 tetrahedral.
Mission 4

Electron-domain vs molecular geometry

Lone pairs and shapeCO₂ · 180°domains: linearmolecule: linearCOOBCl₃ · 120°domains: trigonal planarmolecule: trigonal planarBClClClSO₂ · a little < 120°domains: trigonal planarmolecule: bentSOOCH₄ · 109.5°domains: tetrahedralmolecule: tetrahedralCHHHHNH₃ · ≈ 107°domains: tetrahedralmolecule: trigonal pyramidalNHHHH₂O · ≈ 104.5°domains: tetrahedralmolecule: bentOHH
  • Electron-domain geometry: where all the domains point, lone pairs included.
  • Molecular geometry: where the atoms are.
DomainsLone pairsElectron-domain geometryMolecular geometryExample
20linearlinearCO2
30trigonal planartrigonal planarBCl3
31trigonal planarbentSO2
40tetrahedraltetrahedralCH4
41tetrahedraltrigonal pyramidalNH3
42tetrahedralbentH2O
Quick check
?Which pair of species have different molecular geometries?
Mission 4

What sets the angles

  • Lone pairs sit closer to the central atom, so they repel more than bonding pairs.
  • Repulsion: lone pair–lone pair > lone pair–bonding pair > bonding pair–bonding pair.
  • Each lone pair squeezes the bond angles by about 2.5°.
  • CH4 109.5° → NH3 about 107° → H2O about 104.5°.
  • NH4⁺ has four bonding pairs, no lone pair: 109.5°, like CH4.
  • A double bond holds more electron density and repels more: ethene's H–C–H angle is about 117°.
Quick check
?In CH4, NH3 and H2O, the central atom is surrounded by four electron domains. According to VSEPR theory, how does the H–X–H bond angle (X = C, N or O) change from CH4 to NH3 to H2O, and why?
Quick check
?Which molecule has a tetrahedral electron-domain geometry but a bent molecular geometry?
Mission 4

Five and six pairs

Five and six electron pairs: PCl5 and SF6PClClClClClaxial (2)equatorial (3)PCl₅trigonal bipyramidalaxial–equatorial: 90°equatorial–equatorial: 120°SFFFFFFSF₆octahedralneighboringbonds: 90°
  • From period 3 on, a central atom can hold more than eight outer electrons: an expanded octet.
  • Period 2 atoms (B, C, N, O, F) can't.
  • 5 pairs: trigonal bipyramidal. PCl5: three equatorial Cl at 120°, two axial Cl at 90° to them.
  • 6 pairs: octahedral. SF6: every F–S–F angle 90°.
Mission 4

Lone pairs with five or six pairs

Lone pairs with five and six electron domains5 domains: lone pairs equatorialSFFFFSF₄see-sawBrFFFBrF₃T-shapedXeFFXeF₂linear6 domains: lone pairs oppositeBrFFFFFBrF₅square pyramidalIClClClClICl₄⁻square planar
  • Five pairs: lone pairs go equatorial, where they have fewer neighbors at 90°.
  • Six pairs: two lone pairs sit opposite each other, 180° apart.
PairsLone pairsShapeExample
51see-sawSF4
52T-shapedBrF3
53linearXeF2
61square pyramidalBrF5
62square planarICl4⁻
  • Count lone pairs first: outer electrons of the central atom, +1 per negative charge (−1 per positive charge), − electrons used in bonds, ÷ 2. ICl4⁻: (7 + 1 − 4) ÷ 2 = 2.
Quick check
Lewis diagram of ClF₃. A central Cl atom is joined by single bonds to three F atoms, each of which has three lone pairs.ClFFF
?The Lewis diagram of ClF3 is shown. Which gives the F–Cl–F bond angles and the molecular geometry of ClF3?
Mission check

Two Lewis formulas side by side, each drawn with three atoms in a straight horizontal line. Left, labeled BeCl₂: Cl–Be–CBeCl₂Cl₂OClBeClClOCl
?The diagram shows the Lewis diagrams of beryllium chloride, BeCl2, and dichlorine monoxide, Cl2O, each drawn with its three atoms in a straight line. Which deduction about the molecular geometry of Cl2O is correct?
Mission 5Topics 2.2, 2.6, 2.7

Mission 5: A double bond shares twice as many electrons as a single bond. So why isn't it twice as strong?

Make a guess: A double bond shares twice as many electrons as a single bond. So why isn't it twice as strong?

Mission 5

Sigma bonds

Sigma bondhead-on overlapσ bond: density on the axisCCHHHHHHethane: free rotation
  • σ bond: direct (head-on) overlap of orbitals between two nuclei.
  • Electron density lies on the axis between the nuclei.
  • Every single bond is a σ bond: all C–C and C–H bonds in alkanes.
  • Groups can rotate freely about a σ bond (free rotation).
Mission 5

Pi bonds

Pi bondsideways overlap of p orbitalsσabovebelowone π bond, two lobesethene: all six atoms in one planeCCHHHH120°no rotation
  • π bond: sideways overlap of two p orbitals, one on each atom.
  • Electron density lies above and below the axis, not on it.
  • Double bond = 1σ + 1π. Triple bond = 1σ + 2π.
  • The π bond stops rotation: groups on each C are fixed in place.
  • No rotation about the π bond: this allows geometric (cis-trans) isomers.
  • Each C of C=C: three bonding regions, trigonal planar, about 120°.
Quick check
Lewis diagram of acrylonitrile. A C atom bonded to two H atoms is joined by a double bond to a second C atom, which is bCCCNHHH
?The Lewis diagram of acrylonitrile, C3H3N, is shown. How many sigma bonds and how many pi bonds are in one molecule of acrylonitrile?
Mission 5

Why C=C is shorter and stronger, but not twice as strong

Bond lengths and bond enthalpies of C-C and C=CBond length (pm)C–C154C=C134050100150Average bond enthalpy (kJ/mol)σ 347C–C347σ 347π 265C=C6120200400600dashed: 2 × 347 = 694
  • C–C 154 pm, 347 kJ/mol. C=C 134 pm, 612 kJ/mol (average bond enthalpies).
  • Two shared pairs pull the nuclei closer: C=C is shorter and stronger than C–C.
  • Higher bond order: shorter and stronger bond.
  • But not twice as strong: the π bond is weaker than the σ bond (612 − 347 ≈ 265).
  • Sideways overlap of p orbitals is less effective than head-on overlap.
Quick check
?A student hypothesizes that a pi bond between two carbon atoms prevents rotation about the bond that joins them. Which observation does this hypothesis predict?
Mission 5

Hybridization labels

Electron domains and hybridization labels4 domainssp³3 domainssp²2 domainsspCHHHHCCHHHHHCCH109.5°120°180°CH₄central CC₂H₄each CC₂H₂each C
  • Count electron domains (bonds of any order + lone pairs) around the atom.
Electron domainsHybridizationIdeal angleExample
4sp³109.5°C in CH4; N in NH3; O in H2O
3sp²120°C in C2H4; S in SO2
2sp180°C in C2H2; C in CO2
  • σ bonds and lone pairs use the hybrid orbitals. π bonds use p orbitals that are left over.
  • Count domains, not bonded atoms: a lone pair counts.
Quick check
?In which molecule is the central atom sp² hybridized?
Mission 5

Resonance

Resonance in the nitrate ionNOOO1−NOOO1−NOOO1−NOOO1−resonance hybrid:identical N–O bondsone real ion,three drawingsBond length (pm)O=O 121O₃ 128O–O 148
  • If a double bond can be drawn in more than one equivalent place, each drawing is a resonance structure.
  • Atoms stay put; only electrons are redrawn. Structures are linked by ↔.
  • NO3⁻: three resonance structures. The real ion is one resonance hybrid: it never flips between drawings.
  • Its π electrons are delocalized: all three N–O bonds are identical, between single and double.
  • Evidence: in O3 both O–O bonds are 128 pm, between O–O (148 pm) and O=O (121 pm).
  • Resonance is needed to predict bond lengths and properties correctly.
Mission 5

Formal charge and the limits of Lewis diagrams

Formal charge in CO2 and NOOCO0000 + 0 + 0 = 0betterCO₂OCO+10−1+1 + 0 − 1 = 0not as goodCO₂NO00NOunpaired electron:N has 7, not 8numbers under atoms: formal charge
  • Formal charge = valence electrons − nonbonding electrons − ½ × bonding electrons.
  • Best Lewis diagram: octets obeyed, formal charges closest to zero, any negative charge on the more electronegative atom.
  • CO2: O=C=O gives 0, 0, 0. O≡C–O gives +1, 0, −1. So O=C=O is better.
  • Formal charges sum to the overall charge of the species.
  • Odd-electron species (NO, 11 e⁻; NO2, 17 e⁻) can't give every atom an octet. The Lewis model is only approximate here.
Quick check
Two Lewis structures drawn in a straight line. X: an N atom with one lone pair, joined by a triple line to a second N atXYNNONONEach line is a bonding pair of electrons;each pair of dots is a lone pair.
?The diagram shows two Lewis structures, X and Y, drawn for N2O with the atoms bonded in different orders. Which claim about the better model of N2O is supported by evidence from the structures?
Mission check

?A C≡C bond is only about 2.4 times as strong as a C–C bond, not 3 times. Which statement explains this?
  • Average bond enthalpies: C–C 347 kJ/mol · C=C 612 kJ/mol · C≡C 838 kJ/mol.
Mission 6Topic 2.7

Mission 6: Spearmint and caraway get their smells from mirror-image molecules. How can your nose tell them apart?

Make a guess: Spearmint and caraway get their smells from mirror-image molecules. How can your nose tell them apart?

Mission 6

Stereoisomers and restricted rotation

Why C=C cannot rotateC=C: a σ bond and a π bondCCCCσ bond on the axisπ bond: p orbitalsoverlap sidewaystwist 90°:π overlap lostenergy barrierPropene, CH2=CHCH3HHHCH3two H on one C:no isomerssix atoms in one planebond angles about 120°
  • Stereoisomers: same structural formula, different arrangement of atoms in space.
  • A C=C is a σ bond plus a π bond. The π bond is a sideways overlap of p orbitals, above and below the plane.
  • Twisting about the C=C would break the π bond: a large energy barrier. So there is no rotation.
  • Groups are locked on the same side or on opposite sides of the C=C.
  • This needs two different groups on each C=C carbon. Propene, CH2=CHCH3, has none: one carbon carries two H.
  • These are geometric isomers.
Mission 6

Naming cis and trans

cis and trans alkenesClHClHcis-1,2-dichloroethenesame sideClHHCltrans-1,2-dichloroetheneopposite sides
  • cis: matching groups on the same side of the C=C.
  • trans: matching groups on opposite sides.
  • ClHC=CHCl: cis-1,2-dichloroethene and trans-1,2-dichloroethene.
  • Same atoms, same bonds, but two different compounds: they cannot turn into each other.
Quick check
?cis-But-2-ene and trans-but-2-ene do not turn into each other at room temperature. Which statement best explains why?
Quick check
?Which compound can exist as cis and trans stereoisomers about its C=C bond?
Mission 6

Background: mirror-image molecules

Enantiomers of lactic acidmirrorCOOHCH3OHHCOOHCH3OHHlactic acidits mirror imagechiral carbonWedge: toward you · dash: away
  • Background for the video: beyond the AP course.
  • A carbon bonded to four different groups is chiral. Its molecule has two mirror-image forms that cannot be superimposed.
  • Each form rotates plane-polarized light: by equal angles, in opposite directions.
  • A racemic mixture (50 : 50) shows no rotation: the effects cancel.
  • Mirror-image forms have the same mass and boiling point. They differ only in a chiral setting.
  • Your smell receptors are chiral, so the two carvones smell different: spearmint and caraway.
Mission check

?cis-1,2-Dichloroethene boils at about 60 °C; trans-1,2-dichloroethene boils at about 48 °C. Both are ClHC=CHCl. Which explains why they are two separate compounds with different boiling points?
Recap

The big ideas

Mission 1

  • Ions form by losing or gaining electrons; charges balance to zero in the formula.
  • A giant lattice of fixed ions: high melting point, brittle, conducts only when molten or dissolved.
  • Higher charges and smaller ions → stronger attraction.

Mission 2

  • A covalent bond is the attraction of two nuclei for a shared pair; in a co-ordinate bond one atom supplies both electrons.
  • More shared pairs: shorter, stronger bond. N≡N is why nitrogen is so unreactive.
  • The potential-energy minimum gives bond length (position) and bond energy (depth).

Mission 3

  • Metallic bonding: attraction between cations and delocalized electrons; non-directional, so metals conduct, are malleable and (usually) melt high.
  • To conduct, a substance needs mobile charged particles. Decide the structure, then explain the property.
  • Interstitial alloys (small atoms in gaps, e.g. steel) are more rigid; substitutional alloys (similar radii, e.g. brass) swap atoms. Both conduct.

Mission 4

  • Count every pair (or domain) around the central atom, lone pairs included; they spread as far apart as possible.
  • The shape names only the atoms. Lone pairs repel most and close up the bond angles.

Mission 5

  • σ: head-on overlap, on the axis. π: sideways p overlap, above and below; weaker; stops rotation. Double = σ + π; triple = σ + 2π.
  • 4, 3, 2 domains → sp³, sp², sp labels; resonance hybrids; best Lewis diagram has formal charges nearest zero.

Mission 6

  • A pi bond blocks rotation about C=C, giving cis and trans (geometric) isomers.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Compound Structure and Properties for AP Chemistry. 🎉

  1. Mission 1Salt is made of charged particles. So why doesn't a salt crystal conduct electricity?
  2. Mission 2Air is 78% nitrogen. Why does almost nothing react with it?
  3. Mission 3Tin conducts electricity. So why doesn't liquid tin(IV) chloride conduct at all?
  4. Mission 4Water and carbon dioxide both have three atoms. Why is one bent and the other straight?
  5. Mission 5A double bond shares twice as many electrons as a single bond. So why isn't it twice as strong?
  6. Mission 6Spearmint and caraway get their smells from mirror-image molecules. How can your nose tell them apart?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to AP Chemistry