← A-Level Chemistry · OCR · A-Level Chemistry revision
⭐ 0
OCR A-level Chemistry A (H432) · Module 5 - 5.3 Transition elements (part 2)
Mini-Lesson

Transition elements (part 2)

4 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1Why can an enzyme grab one molecule but not that molecule's mirror image?
  2. Mission 2Why can carbon monoxide stop blood carrying oxygen, even when there is plenty of oxygen to breathe?
  3. Mission 3How can a metal salt with no hydrogen in its formula give away hydrogen ions?
  4. Mission 4Why does extra alkali make some metal precipitates vanish but leave others untouched?
Mission 1

Mission 1: Why can an enzyme grab one molecule but not that molecule's mirror image?

Make a guess: Why can an enzyme grab one molecule but not that molecule's mirror image?

Mission 1

Enzymes: protein catalysts

An enzyme binds its substrate, then releases the productESactive siteE + SEESEEPEE + PreusedEnergyReaction progressE + SE + PEaEano enzymewith enzymeES
  • An enzyme is a protein that acts as a catalyst: it speeds up a reaction and is not used up.
  • Its folded chain leaves a small pocket: the active site.
  • The reacting molecule, the substrate, binds in the active site: an enzyme–substrate complex.
  • Bound, the substrate is held in a good orientation and reacts by a path with a lower activation energy.
  • The products leave; the enzyme is free to bind another substrate.
Mission 1

Why a mirror image doesn't fit

An active site with three binding points: one enantiomer fits, its mirror image does notone enantiomer: all 3 matchHabcits mirror image: only 2 of 3 matchHabc
  • A chiral substrate has two enantiomers: non-superimposable mirror images.
  • The active site is 3-D. It has several binding points, made by groups on the amino acids.
  • One enantiomer can line up with all the binding points at once.
  • Its mirror image can match at most two at a time: it binds weakly or not at all.
  • So the active site is stereospecific: it binds only one enantiomer.
Quick check
?A drug molecule is chiral. One enantiomer strongly inhibits an enzyme. The other enantiomer has almost no effect. Which explanation is best?
Mission 1

Cisplatin meets DNA

Cisplatin binds to two neighbouring guanines in DNA and kinks the strandcisplatinClClH3NNH3Ptcis: 90°square planar2 Cl− replacedbound to DNA: ligand replacementGGNNPtH3NNH3one DNA strandstrand kinked: replication stops
  • Cisplatin: square planar Pt(NH3)2Cl2, the two Cl⁻ at 90°.
  • In the cell, the Cl⁻ ligands are replaced: ligand replacement.
  • Pt forms a bond to a nitrogen atom on guanine, then to a second guanine next to it on the same strand.
  • The DNA kinks. It can't be unzipped and copied: DNA replication stops, and the cell can't divide.
Mission 1

Benefits and harms

  • Benefit: cancer cells divide rapidly, so they are hit hard. Cisplatin treats several cancers very successfully.
  • Harm: it also binds DNA in healthy cells that divide quickly: hair follicles, gut lining, blood-forming cells. Hair loss, nausea.
  • It can also damage the kidneys and hearing.
  • Doctors limit the dose and frequency. Society weighs the benefits against the adverse effects.
Quick check
?Patients treated with cisplatin often lose hair and feel sick. Which explanation is best?
Mission check

?A chemist makes [Pt(en)Cl2], in which en (H2NCH2CH2NH2) is a bidentate ligand. Which prediction about its anti-cancer activity is best?
Mission 2

Mission 2: Why can carbon monoxide stop blood carrying oxygen, even when there is plenty of oxygen to breathe?

Make a guess: Why can carbon monoxide stop blood carrying oxygen, even when there is plenty of oxygen to breathe?

Mission 2

Swapping ligands

Copper(II) with ammonialittleNH3excessNH3[Cu(H2O)6]2+bluepale blueprecipitatedeep bluesolution[Cu(NH3)4(H2O)2]2+H2OH2OH3NNH3H3NNH32+4 NH3 in a plane · 2 H2O axial
  • In ligand substitution, one ligand replaces another around the metal ion.
  • NH3 and H2O are similar in size and both uncharged: they swap with no change in co-ordination number.
  • [Cu(H2O)6]²⁺ + 4NH3 → [Cu(NH3)4(H2O)2]²⁺ + 4H2O · blue → deep blue.
  • Add ammonia drop by drop: a pale blue precipitate forms first, then dissolves in excess.
  • Use complexed formulae, as here, in substitution equations.
Mission 2

More nitrogen ligands

  • Cr³⁺: [Cr(H2O)6]³⁺ + 6NH3 → [Cr(NH3)6]³⁺ + 6H2O, in excess ammonia · violet (often looks green) → purple.
Mission 2

Chloride changes the number

Size and number[Cu(H2O)6]2+CN = 6Cl⁻Cl⁻Cl⁻Cl⁻[CuCl4]2−CN = 4conc HCladd waterH2OCl− biggerbluegreenyellow
  • Cl⁻ is larger than H2O, and charged: only four fit around the metal ion.
  • [Cu(H2O)6]²⁺ + 4Cl⁻ ⇌ [CuCl4]²⁻ + 6H2O · blue → yellow (green part-way).
  • [Co(H2O)6]²⁺ + 4Cl⁻ ⇌ [CoCl4]²⁻ + 6H2O · pink → blue.
  • Co-ordination number 6 → 4; octahedral → tetrahedral.
  • Concentrated HCl supplies the Cl⁻. Add water and the colour change reverses.
Quick check
?Why does the co-ordination number of copper(II) change when Cl⁻ replaces H2O, but not when NH3 replaces H2O?
Mission 2

Ligands with more than one grip

Ligand gripH2NNH2CH2CH2en · 2 donors
  • Bidentate: two donor atoms, two co-ordinate bonds. en, H2NCH2CH2NH2 (two N).
  • Co-ordination number counts bonds: [Ni(en)3]²⁺ is 6.
Quick check
?EDTA⁴⁻ bonds to a metal ion through two N atoms and four O atoms. What are the oxidation state and the co-ordination number of iron in [Fe(EDTA)]⁻?
Mission 2

Haemoglobin carries oxygen

Haem siteproteinNNNNNFe2+haemO2weak,reversible
  • Haemoglobin contains haem: an iron(II) complex with a multidentate ligand (four N atoms around Fe²⁺).
  • A fifth bond holds the Fe²⁺ to the protein.
  • At the sixth site, O2 forms a co-ordinate bond to Fe²⁺.
  • In the lungs O2 binds; in the tissues, where O2 is low, it is released. The bond is weak and reversible.
Mission 2

Carbon monoxide takes the seat

Haem siteproteinNNNNNFe2+haemCOO2≈ 200×stronger
  • CO bonds to the same site on Fe²⁺, about 200 times more strongly than O2.
  • It is a ligand substitution: CO replaces O2.
  • HbO2 + CO ⇌ HbCO + O2 has K ≈ 200: even air with just 0.1% CO can tie up about half the haem.
  • A haem with CO bonded can't carry O2.
  • Tissues are starved of oxygen: CO is toxic.
Quick check
?People with carbon monoxide poisoning are given pure oxygen to breathe, sometimes at high pressure. Why does this help?
Mission check

?A few drops of dilute potassium thiocyanate, KSCN, are added to a pale solution of Fe³⁺(aq). It turns deep red as [Fe(SCN)(H2O)5]²⁺ forms, even though water molecules outnumber thiocyanate ions by thousands to one. What does this show?
Mission 3

Mission 3: How can a metal salt with no hydrogen in its formula give away hydrogen ions?

Make a guess: How can a metal salt with no hydrogen in its formula give away hydrogen ions?

Mission 3

Metal-aqua ions

Octahedral aqua ionH2OH2OH2OOH2H2OOH2Mn+90°each O gives M a lone pair
  • Dissolve a metal salt in water: each metal ion is surrounded by six water ligands.
  • Each H2O donates a lone pair from O to the metal ion: a dative (coordinate) bond.
  • Formula: [M(H2O)6]ⁿ⁺, an octahedral metal-aqua ion.
  • The ion keeps the metal's charge: water ligands are neutral.
Mission 3

Colours of aqua ions

Colour stripCu2+(aq)blueFe2+(aq)pale greenFe3+(aq)yellow-brownCr3+(aq)violet | greenMn2+(aq)very pale pinkFe3+: the ion itself is pale violetCr3+: green in the lab (other ligands)
  • [Cu(H2O)6]²⁺: blue.
  • [Fe(H2O)6]²⁺: pale green.
  • [Fe(H2O)6]³⁺: pale violet, but its solutions usually look yellow-brown.
  • [Cr(H2O)6]³⁺: violet; chromium(III) solutions in the lab often look green, because other ligands (e.g. sulfate, chloride) replace some water.
  • [Mn(H2O)6]²⁺: very pale pink (almost colourless).
Quick check
?Which list gives the usual colours of solutions of Fe²⁺(aq), Fe³⁺(aq) and Cu²⁺(aq), in that order?
Mission 3

Pulled water ligands

Polarised O-HOHHM3+δ+δ+electron density pulled towards OOHHM3+OH−takes H+an OH− ligand is left on M
  • The positive metal ion attracts the O lone pair strongly.
  • Electron density is drawn from the O–H bonds towards O and the metal.
  • So the O–H bonds become more polar and weaker.
  • A water ligand can now lose an H⁺, leaving an OH⁻ ligand on the metal.
  • The "hydrogen ions" in the opening question come from the water ligands, not the salt's formula.
Mission 3

Bases pull H⁺ off: a neutral precipitate

Stepwise deprotonation[Cu(H2O)6]2+2+[Cu(H2O)5(OH)]+1+[Cu(H2O)4(OH)2]0charge− H+OH− takes H+,forms H2O− H+OH− takes H+,forms H2Oprecipitate
  • Add a few drops of OH⁻(aq): it removes H⁺ from water ligands (H⁺ + OH⁻ → H2O).
  • Remove as many H⁺ as the ion's charge: the complex becomes neutral.
  • A neutral complex is insoluble: it appears as a precipitate.
  • [Cu(H2O)6]²⁺(aq) + 2OH⁻(aq) → [Cu(H2O)4(OH)2](s) + 2H2O(l)
  • Blue solution → pale blue precipitate.
Mission 3

Worked example: iron(III) with hydroxide

  • Start: [Fe(H2O)6]³⁺. Charge 3+, so remove 3 H⁺.
  • Product: [Fe(H2O)3(OH)3]. Check: 6 ligands; charge 3+ − 3 = 0.
  • Each removed H⁺ meets an OH⁻: 3H2O formed.
  • [Fe(H2O)6]³⁺(aq) + 3OH⁻(aq) → [Fe(H2O)3(OH)3](s) + 3H2O(l)
  • Observation: yellow-brown solution → orange-brown precipitate.
  • Simple formulae are also accepted: Fe³⁺(aq) + 3OH⁻(aq) → Fe(OH)3(s).
Quick check
?A few drops of NaOH(aq) are added to a solution of [Fe(H2O)6]²⁺. Which species is the precipitate?
Mission check

?Gallium is below aluminium in Group 13 and forms the aqua ion [Ga(H2O)6]³⁺. A few drops of NaOH(aq) are added, and a white precipitate forms. Which species is the precipitate?
Mission 4

Mission 4: Why does extra alkali make some metal precipitates vanish but leave others untouched?

Make a guess: Why does extra alkali make some metal precipitates vanish but leave others untouched?

Mission 4

A little base: the same first step

  • NaOH(aq) supplies OH⁻, which removes H⁺ from water ligands (see Mission 3).
  • A few drops: the neutral hydroxide precipitates.
  • NH3(aq) is a weak base: NH3 + H2O ⇌ NH4⁺ + OH⁻.
  • So a little NH3 gives the same precipitate as a little NaOH.
  • [Cu(H2O)6]²⁺(aq) + 2NH3(aq) → [Cu(H2O)4(OH)2](s) + 2NH4⁺(aq)
  • The interesting part comes next: add the reagent in excess.
Mission 4

Precipitate colours

Precipitate coloursa few drops of NaOH(aq)Cu2+(aq)pale blueFe2+(aq)greenbrown top layerFe3+(aq)orange-brownCr3+(aq)grey-greenMn2+(aq)pale brown(off-white)
  • Cu²⁺: blue solution → pale blue precipitate.
  • Fe²⁺: pale green → green precipitate; turns brown at the surface on standing (air oxidises Fe(II) to Fe(III)).
  • Fe³⁺: yellow-brown → orange-brown precipitate.
  • Cr³⁺: green (or violet) → grey-green precipitate.
  • Mn²⁺: very pale pink → pale brown (off-white) precipitate; darkens in air.
Quick check
?A few drops of NaOH(aq) are added to a pale green solution. A green precipitate forms, and its surface turns brown on standing in air. Which ion was in the solution?
Mission 4

Excess NaOH: amphoteric hydroxides

Amphoteric hydroxideamphoteric hydroxide[Cr(H2O)3(OH)3](s)grey-green precipitate+ H+acid–base+ OH−acid–base[Cr(H2O)6]3+solution[Cr(OH)6]3−dark greensolution
  • An amphoteric hydroxide dissolves in both acids and bases.
  • Cr: [Cr(H2O)3(OH)3](s) + 3OH⁻(aq) → [Cr(OH)6]³⁻(aq) + 3H2O(l). Grey-green precipitate → dark green solution.
  • Simple formulae are fine: Cr(OH)3 + 3OH⁻ → [Cr(OH)6]³⁻.
  • Cu, Fe(II) and Fe(III) hydroxides: no change in excess NaOH.
  • Mn(II) hydroxide: no change.
Mission 4

Excess ammonia: ligand exchange

Copper(II) with ammoniafew dropsNH3excessNH3[Cu(H2O)6]2+bluepale blueprecipitatedeep bluesolution[Cu(NH3)4(H2O)2]2+H2OH2OH3NNH3H3NNH32+octahedral · 2 H2O trans (axial)
  • NH3 is a ligand as well as a base. In excess it replaces H2O and OH⁻ ligands, giving a soluble complex.
  • Cu: [Cu(H2O)4(OH)2](s) + 4NH3(aq) → [Cu(NH3)4(H2O)2]²⁺(aq) + 2H2O(l) + 2OH⁻(aq). Pale blue precipitate → deep blue solution.
  • Cr: [Cr(H2O)3(OH)3](s) + 6NH3(aq) → [Cr(NH3)6]³⁺(aq) + 3H2O(l) + 3OH⁻(aq). → purple solution.
  • Fe and Mn hydroxides: no change.
Mission 4

Amphoteric or ligand exchange?

Amphoteric hydroxideamphoteric hydroxide[Cr(H2O)3(OH)3](s)grey-green precipitate+ H+acid–base+ OH−acid–base[Cr(H2O)6]3+solution[Cr(OH)6]3−dark greensolution+ NH3(excess)[Cr(NH3)6]3+purple solutionligand exchange
  • Amphoteric (acid–base): the hydroxide loses H⁺ to OH⁻ or gains H⁺ from acid. Only H2O/OH⁻ ligands, before and after.
  • [Cr(H2O)3(OH)3] + 3OH⁻ → [Cr(OH)6]³⁻ + 3H2O
  • [Cr(H2O)3(OH)3] + 3H⁺ → [Cr(H2O)6]³⁺
  • Ligand exchange: a new ligand replaces H2O/OH⁻.
  • [Cr(H2O)3(OH)3] + 6NH3 → [Cr(NH3)6]³⁺ + 3H2O + 3OH⁻
  • Quick test: does a new kind of ligand appear in the product? Yes → ligand exchange.
Quick check
?Which precipitate dissolves in both excess NaOH(aq) and excess NH3(aq)?
Mission 4

Running the tests

Running the testsunknown solutionCu2+ Fe2+ Fe3+ Cr3+Mn2++ NaOH(aq), dropwisenote the precipitate colour+ excess NaOH(aq), shakedoes it dissolve?fresh sample + NH3(aq)dropwise, then excess: dissolves?leave to standcolour change in air?
  • Wear eye protection: NaOH(aq) is corrosive.
  • A few cm³ of the unknown solution in a test tube. Add NaOH(aq) dropwise: note the precipitate colour.
  • Keep adding until in excess, shaking: does the precipitate dissolve?
  • Repeat with NH3(aq) on a fresh sample, dropwise then in excess.
  • Leave the precipitates to stand: some change colour in air (oxidation).
  • This is part of PAG 4 (qualitative analysis).
Mission check

?Zinc ions are not in your table of tests. A few drops of NaOH(aq) added to Zn²⁺(aq) give a white precipitate. With excess NaOH(aq), the precipitate dissolves to give a colourless solution. Which equation shows what the excess NaOH(aq) does?
Recap

The big ideas

Mission 1

  • Binding needs an exact 3-D fit: an active site is stereospecific, so the mirror image doesn't fit.
  • Cisplatin's two cis Cl⁻ are replaced by N on neighbouring guanines, stopping DNA replication.

Mission 2

  • Ligand substitution: NH3 ↔ H2O keeps the co-ordination number; Cl⁻ (larger, charged) changes it from 6 to 4. CO replaces O2 at the Fe²⁺ of haem because it bonds about 200 times more strongly.

Mission 3

  • [M(H2O)6]ⁿ⁺: the metal ion polarises its water ligands, so they can lose H⁺.
  • OH⁻ removes as many H⁺ as the charge: the neutral complex precipitates.

Mission 4

  • A little OH⁻ (or NH3): neutral hydroxide precipitate. Its colour identifies the ion.
  • Excess NaOH dissolves amphoteric hydroxides; excess NH3 dissolves some by ligand exchange.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Transition elements (part 2) for OCR A-level Chemistry. 🎉

  1. Mission 1Why can an enzyme grab one molecule but not that molecule's mirror image?
  2. Mission 2Why can carbon monoxide stop blood carrying oxygen, even when there is plenty of oxygen to breathe?
  3. Mission 3How can a metal salt with no hydrogen in its formula give away hydrogen ions?
  4. Mission 4Why does extra alkali make some metal precipitates vanish but leave others untouched?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to A-Level Chemistry · OCR