← A-Level Chemistry · Eduqas · A-Level Chemistry revision
⭐ 0
Eduqas A-level Chemistry (A410QS) · C2.3 Rates of reaction
Mini-Lesson

Rates of reaction

4 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1A speed camera clocks a car at one instant. How do you clock a reaction at one instant?
  2. Mission 2Why can a cloud of flour dust explode, when a heap of flour only smoulders?
  3. Mission 3Hydrogen peroxide sits in a bottle for months, yet fizzes at once on a slice of raw potato. Why?
  4. Mission 4Two glasses of a blue sports drink look the same. How could a beam of light tell which holds more dye?
Mission 1

Mission 1: A speed camera clocks a car at one instant. How do you clock a reaction at one instant?

Make a guess: A speed camera clocks a car at one instant. How do you clock a reaction at one instant?

Mission 1

What rate means

  • Rate of reaction: the change in concentration of a reactant or product per unit time.
  • Units: mol dm⁻³ s⁻¹.
  • Reactant concentrations fall; product concentrations rise. Rate is quoted as a positive value.
  • Other measured quantities work too: gas volume per second, mass lost per second.
Quick check
?Hydrogen peroxide decomposes: 2H2O2(aq) → 2H2O(l) + O2(g). Which quantity is the rate of this reaction at a particular moment?
Mission 1

Following a reaction as it happens

Three ways to follow a reaction1 Gas volume0204060cm³gas syringe2 Mass lossCO2 outgcotton wool:CO2 escapes,acid sprayis stopped3 Colour: colorimeterlampfiltercuvettedetector4 Calibration curveAbsorbanceConcentration / mol dm−3points: standardsolutions, known conc.
  • Gas volume: collect the gas in a gas syringe; read the volume at set times.
  • Mass loss: a gas escapes from a flask on a balance, e.g. CO2 from marble chips and acid.
  • Colour: a coloured reactant or product is followed with a colorimeter.
  • These are continuous monitoring methods: many readings from one run.
  • Change one variable; keep everything else the same.
Mission 1

Colorimetry

  • Light passes through the solution; a coloured species absorbs some of it.
  • Choose a filter of the colour the species absorbs (the complementary colour).
  • Make a calibration curve: absorbance of solutions of known concentration.
  • Read each absorbance during the reaction; convert it to concentration from the curve.
  • Good for reactions of Br2, I2 or MnO4⁻: nothing is removed from the mixture.
Mission 1

Sampling and quenching

  • Remove a small sample with a pipette at timed intervals.
  • Quench it, to stop the reaction: dilute in ice-cold water, or remove the catalyst.
  • Example: for an acid-catalysed reaction of iodine, add NaHCO3 to neutralise the acid.
  • Titrate the sample: e.g. the iodine left, with sodium thiosulfate and starch.
  • Each titre gives a concentration at that time: plot concentration against time.
Mission 1

Clock reactions: the initial-rate method

Clock methodsDisappearing crossIodine clockclearcloudy(sulfur)colourlessblue-blacktime t untilcross hiddentime t untilblue-black1/tConcentrationrate ∝ 1/tvalid only whilelittle hasreacted
  • Time how long a fixed, small amount of reaction takes: t.
  • Early on, the rate hardly changes, so initial rate ∝ 1/t.
  • Disappearing cross: thiosulfate + acid forms a sulfur precipitate; time until the cross is hidden.
  • Iodine clock: time until a sudden blue-black colour with starch.
  • Repeat with different starting concentrations: one run per concentration.
Quick check
?A student reacts 0.10 g of magnesium ribbon with excess dilute hydrochloric acid: Mg(s) + 2HCl(aq) → MgCl2(aq) + H2(g). Which method is least suitable for measuring the rate of this reaction?
Mission 1

Average rate or rate at an instant

Average rate and rate at an instant on a product-time curveAmount of productTimePinitial raterate at Paverage rate
  • Average rate = total change ÷ total time: the gradient of a straight line between two points.
  • Rate at an instant = gradient of the tangent to the curve at that time.
  • Initial rate: the tangent at t = 0, where the curve is steepest.
  • The curve flattens as reactants are used up: the rate falls.
Mission 1

Worked example: drawing a tangent

Worked tangent: mass of CO2 lost against time01002003000.00.51.01.52.0Mass of CO2 lost / gTime / sPΔx = 120 sΔy = 1.46 g2.00 gP on the curve = (60 s, 1.19 g)tangent: (0 s, 0.46 g) to (120 s, 1.92 g)gradient = 1.46 ÷ 120 = 0.0122 g s−1
  • Marble chips + acid: mass of CO2 lost against time. At 60 s, 1.19 g has been lost.
  • Draw the tangent at 60 s. It passes through (0 s, 0.46 g) and (120 s, 1.92 g).
  • Rate = (1.92 − 0.46) g ÷ (120 − 0) s = 1.46 ÷ 120 = 0.0122 g s⁻¹.
  • Average over the first 60 s: 1.19 ÷ 60 = 0.0198: larger, because the reaction was faster early on.
  • Read two far-apart points on the tangent, not on the curve.
Quick check
?Magnesium ribbon reacts with excess hydrochloric acid, and the hydrogen is collected in a gas syringe. A graph of the volume of hydrogen (y-axis, cm³) against time (x-axis, s) is a curve that is steep at first, becomes less steep and levels off at 60 cm³ at 100 s. The curve passes through the point (20 s, 34 cm³). A tangent drawn to the curve at t = 20 s passes through the points (0 s, 10 cm³) and (40 s, 58 cm³). What is the rate of reaction at t = 20 s?
Calculate
?Bromine reacts with methanoic acid: Br2(aq) + HCOOH(aq) → 2HBr(aq) + CO2(g). A graph of [Br2] against time starts at 0.0130 and curves downwards, passing through (80 s, 0.0087). A tangent drawn at t = 80 s passes through (0 s, 0.0122) and meets the time axis at 280 s.
  • Concentrations in mol dm⁻³. Calculate the rate at t = 80 s, in units of 10⁻⁵ mol dm⁻³ s⁻¹.
Mission check

?Hydrogen peroxide decomposes on a catalyst, and the oxygen is collected in a gas syringe. The volume–time curve passes through (30 s, 41.9). The tangent drawn at t = 30 s passes through (0 s, 20.2) and (60 s, 63.6). At 60 s the curve itself reads 54.6. What is the rate of reaction at exactly t = 30 s?
  • Volumes in cm³; rates in cm³ s⁻¹.
Mission 2

Mission 2: Why can a cloud of flour dust explode, when a heap of flour only smoulders?

Make a guess: Why can a cloud of flour dust explode, when a heap of flour only smoulders?

Mission 2

Collision theory

Collision theory: energy and orientationGentle collisionXYZXYZbounce apartXYZE < Ea: no reactionHard collisionXYZXYZbonds rearrangeXYZE ≥ Ea: reaction
  • Particles must collide to react. The collision starts the breaking and making of bonds.
  • The collision needs energy at least equal to the activation energy, Ea.
  • Activation energy: the minimum energy that colliding particles need for a reaction to take place.
  • Most collisions do not react: their energy is less than Ea, so the particles just bounce apart.
Quick check
?In a mixture of two gases at room temperature, each molecule collides with others billions of times every second, yet the reaction between them is slow. Why do most of these collisions not lead to a reaction?
Mission 2

Concentration, pressure, surface area

What changes the collision frequencyHigher concentrationlowhighHigher gas pressurelarge volumesmall volumeLarger surface areaone lumpsame mass, small pieces
  • Higher concentration: more particles per unit volume → more frequent collisions.
  • Higher gas pressure: the same particles are squeezed closer → more frequent collisions.
  • Larger surface area of a solid: more particles exposed → more frequent collisions.
  • These change how often particles collide, not the energy of each collision.
  • So more successful collisions per second: a faster rate.
Quick check
?Hydrogen iodide decomposes: 2HI(g) → H2(g) + I2(g). A sample of hydrogen iodide is compressed to half its volume at constant temperature. What is the effect on the rate of reaction, and why?
Mission 2

Temperature

  • Higher temperature: particles move faster, with more kinetic energy.
  • Main effect: a much larger fraction of collisions have energy ≥ Ea.
  • Smaller effect: collisions are also a little more frequent.
  • So a small rise in temperature can give a large rise in rate.
  • A later mission shows this on the Maxwell–Boltzmann distribution.
Mission 2

Catalysts

Energy profile with and without a catalystEnergyProgress of reactionEaEa(cat)ΔHReactantsProductsno catalystwith catalyst
  • A catalyst increases the rate of a reaction without being used up by the overall reaction.
  • It provides an alternative route with a lower activation energy.
  • So, at the same temperature, more collisions have E ≥ Ea. ΔH is unchanged.
  • Also: only a small amount is needed, and a catalyst is often specific to one reaction.
Quick check
?Which statement explains how a catalyst increases the rate of a reaction at constant temperature?
Mission 2

Frequency or energy?

ChangeCollisions per secondFraction with E ≥ Ea
Higher concentrationmoresame
Higher gas pressuremoresame
Larger surface areamoresame
Higher temperaturea few moremany more
Catalyst addedsamemore (lower Ea)
  • Rate depends on the number of successful collisions per second.
Mission check

?An iron nail held in a Bunsen flame only glows. The same mass of fine iron filings sprinkled into the flame burns in bright sparks. Why do the filings react so much faster with oxygen?
Mission 3

Mission 3: Hydrogen peroxide sits in a bottle for months, yet fizzes at once on a slice of raw potato. Why?

Make a guess: Hydrogen peroxide sits in a bottle for months, yet fizzes at once on a slice of raw potato. Why?

Mission 3

Energy profiles

Energy profiles: exothermic and endothermic reactionsEnergyProgress of reactionExothermicEaΔH < 0ReactantsProductsEnergyProgress of reactionEndothermicEaΔH > 0ReactantsProducts
  • Energy (y) against progress of reaction (x).
  • Activation energy, Ea: from the reactants up to the top of the barrier.
  • ΔH: from reactants to products. Products lower: exothermic. Products higher: endothermic.
  • Ea is always positive, even for an exothermic reaction.
Quick check
?Which energy profile correctly shows an endothermic reaction?
Mission 3

The Maxwell–Boltzmann distribution

Maxwell-Boltzmann distribution at one temperatureNumber of moleculesEnergyBoltzmann energy distribution curveEamost likely energymolecules withE ≥ Eathe tail never reaches the axis
  • Also called the Boltzmann energy distribution curve.
  • The molecules in a gas have a range of energies at any temperature.
  • y: number of molecules with a given energy. x: energy.
  • Starts at the origin: no molecule has zero energy. Rises to a peak, the most likely energy.
  • Long tail that never reaches the energy axis.
  • Area under the curve = total number of molecules. Area beyond Ea = molecules that can react.
Mission 3

Two temperatures

Maxwell-Boltzmann distributions at two temperaturesNumber of moleculesEnergyEaT1T2T2 > T1equal areas underthe two curvesshaded: molecules with E ≥ Ea
  • Hotter sample: peak lower and further right; the curve is broader.
  • Total area unchanged: same number of molecules.
  • Area beyond Ea is much larger: a much bigger fraction of collisions can succeed.
  • Ea does not change with temperature.
  • So a small temperature rise gives a large rate rise: near room temperature, +10 °C often roughly doubles the rate.
Quick check
?A Maxwell–Boltzmann distribution is plotted for a sample of gas at 300 K, with number of particles on the y-axis and kinetic energy on the x-axis. The curve starts at the origin, rises to a peak and falls to a long tail that approaches the energy axis. Which describes the curve for the same sample at 400 K?
Mission 3

Catalysts on an energy profile

Energy profiles with and without a catalystEnergyProgress of reactionExothermicEaEa(cat)ΔHEa(reverse)ReactantsProductsEnergyProgress of reactionEndothermicEaEa(cat)ΔHReactantsProductsno catalystwith catalyst
  • A catalyst provides an alternative route with a lower Ea. It is not used up.
  • Reactant and product energies are unchanged, so ΔH is unchanged.
  • Enzymes are biological catalysts. Raw potato contains catalase, which catalyses 2H2O2 → 2H2O + O2.
Mission 3

The reverse reaction's barrier

Energy profiles with and without a catalystEnergyProgress of reactionExothermicEaEa(cat)ΔHEa(reverse)ReactantsProductsEnergyProgress of reactionEndothermicEaEa(cat)ΔHReactantsProductsno catalystwith catalyst
  • The reverse reaction starts from the products: its Ea runs from the products up to the peak.
  • Read it off the profile. As a check: Ea(reverse) = Ea(forward) − ΔH.
  • Example: Ea(forward) = 60 kJ mol⁻¹, ΔH = −90 kJ mol⁻¹, so Ea(reverse) = 60 + 90 = 150 kJ mol⁻¹.
  • A catalyst lowers Ea(forward) and Ea(reverse) by the same amount.
Mission 3

A catalyst on the Maxwell–Boltzmann curve

A catalyst on the Maxwell-Boltzmann curveNumber of moleculesEnergyEa(catalysed)Ea(uncatalysed)enough energy without a catalystextra, enough energy with a catalystsame temperature, same curve
  • Same temperature, so the same curve.
  • Mark a second, lower Ea(catalysed), to the left of Ea(uncatalysed).
  • The area beyond Ea(catalysed) is larger: more molecules have enough energy.
  • The molecules have no extra energy; the barrier is lower.
Quick check
?Which sketch correctly shows how a catalyst affects a Maxwell–Boltzmann distribution at constant temperature?
Mission check

?A mixture of hydrogen and oxygen can stay unchanged at room temperature for years. In Döbereiner's lamp (1823), a jet of hydrogen in air strikes a piece of platinum and reacts at once, with no flame or spark to start it. Which explanation is correct?
Mission 4

Mission 4: Two glasses of a blue sports drink look the same. How could a beam of light tell which holds more dye?

Make a guess: Two glasses of a blue sports drink look the same. How could a beam of light tell which holds more dye?

Mission 4

Why a solution looks coloured

Absorbed and transmitted lightwhite lightblue solutionorange andred absorbedblue emergesopposite colours are complementaryredorangeyellowgreenblueviolet
  • White light contains every visible wavelength.
  • A coloured solution absorbs some wavelengths and transmits the rest.
  • You see the transmitted light. A blue solution absorbs mainly orange and red light.
  • More dye in the beam's path: more light absorbed.
Mission 4

Measuring absorbance

Colorimeter1 zero with the blank (solvent only)A = 0lampfiltercuvettedetectormeter2 measure the sampleA
  • A colorimeter: lamp → coloured filter → sample in a cuvette → detector.
  • First, zero the instrument with a cuvette of the solvent alone (the blank).
  • The meter reads absorbance, A: how much light the sample absorbs. No units.
  • More light absorbed → less reaches the detector → higher absorbance.
Mission 4

Choosing the wavelength

Absorbed and transmitted lightwhite lightblue solutionorange andred absorbedblue emergesopposite colours are complementaryredorangeyellowgreenblueviolet
  • Pick the filter whose light the solution absorbs most: the complementary colour.
  • Blue copper(II) solution: use an orange or red filter, not a blue one.
  • Here, a small change in concentration gives the biggest change in absorbance: maximum sensitivity.
Quick check
?A student uses a colorimeter to find the concentration of a blue solution of copper(II) sulfate. Which filter should the student use, and why?
Mission 4

The calibration graph

Calibration graph00.040.080.1200.20.40.6concentration / mol dm⁻³absorbanceA = 0.330.055illustrative data
  • Make standard solutions of known concentration from one stock solution.
  • Measure each one's absorbance: same filter or wavelength, same cuvette.
  • Plot absorbance (y) against concentration (x). Here it is a straight line through the origin.
  • Measure the unknown the same way and read its concentration off the graph.
  • Example: copper(II) standards 0.020–0.100 mol dm⁻³ give A = 0.12–0.60. An unknown with A = 0.33 reads 0.055 mol dm⁻³.
  • The graph does the work: you don't need to know ε.
Quick check
?A student plots a calibration graph from copper(II) sulfate standards, then measures an unknown copper(II) solution. Which mistake would make the concentration found for the unknown too high?
Mission 4

Following a reaction rate

Rate by colorimetryAreaction mixture[I₂] / mol dm⁻³time / sΔ[I₂]Δtrate = −gradient= −Δ[I₂] ÷ Δt
  • Use colorimetry when one species is coloured and its amount changes during the reaction.
  • Example: CH3COCH3 + I2 → CH3COCH2I + HI, with acid as catalyst. Only iodine is coloured (yellow-brown).
  • Put the mixture in the colorimeter (blue filter) and record absorbance every few seconds.
  • Convert absorbance to [I2] with a calibration graph. Plot [I2] against time; the gradient gives the rate.
  • Why choose it: continuous readings, no samples removed, the reaction is not disturbed.
Quick check
?Which reaction is best followed by colorimetry?
Mission check

?A green solution of nickel(II) ions is taken from a lab waste container. Its absorbance is measured under the same conditions as these nickel(II) standards.
Standards (mol dm⁻³ : A): 0.050 : 0.16 · 0.100 : 0.32 · 0.150 : 0.48 · 0.200 : 0.64. The sample gives A = 0.40. What is its nickel(II) concentration, in mol dm⁻³?
Recap

The big ideas

Mission 1

  • Rate = change in concentration (or volume, or mass) per unit time.
  • The rate at one instant is the gradient of the tangent at that time; the initial rate is the tangent at t = 0.
  • Two methods: continuous monitoring (one run, many readings) and initial rate (clock: rate ∝ 1/t).

Mission 2

  • A reaction needs collisions with energy ≥ Ea; most collisions fail.
  • Concentration, pressure and surface area raise collision frequency; temperature mainly raises the fraction with E ≥ Ea; a catalyst lowers Ea.

Mission 3

  • Maxwell–Boltzmann: heating spreads the curve (same area, lower peak, further right), so far more molecules have E ≥ Ea.
  • A catalyst lowers Ea by an alternative route: same curve, Ea line moves left; ΔH unchanged.
  • Ea(reverse) = Ea(forward) − ΔH.

Mission 4

  • Coloured species absorb light; absorbance rises in step with concentration. A calibration graph turns absorbance into concentration.
  • Colorimetry follows a rate continuously when one species is coloured.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Rates of reaction for Eduqas A-level Chemistry. 🎉

  1. Mission 1A speed camera clocks a car at one instant. How do you clock a reaction at one instant?
  2. Mission 2Why can a cloud of flour dust explode, when a heap of flour only smoulders?
  3. Mission 3Hydrogen peroxide sits in a bottle for months, yet fizzes at once on a slice of raw potato. Why?
  4. Mission 4Two glasses of a blue sports drink look the same. How could a beam of light tell which holds more dye?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to A-Level Chemistry · Eduqas