← A-Level Chemistry · Eduqas · A-Level Chemistry revision
⭐ 0
Eduqas A-level Chemistry (A410QS) · C3.2 Hydrocarbons
Mini-Lesson

Hydrocarbons

6 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1A fuel made only of carbon and hydrogen burns in air. Where do the poisonous gases in its exhaust come from?
  2. Mission 2Why does bromine in hexane stay orange in the dark but lose its colour in sunlight?
  3. Mission 3Why does an alkene take bromine's colour away in the dark, when an alkane needs light?
  4. Mission 4A double bond shares twice as many electrons as a single bond. So why isn't it twice as strong?
  5. Mission 5Hydrogen bromide can add to propene two ways round, so why does one product win almost every time?
  6. Mission 6When a plastic softens in heat, what is breaking?
Mission 1

Mission 1: A fuel made only of carbon and hydrogen burns in air. Where do the poisonous gases in its exhaust come from?

Make a guess: A fuel made only of carbon and hydrogen burns in air. Where do the poisonous gases in its exhaust come from?

Mission 1

Complete and incomplete combustion

  • Alkanes are good fuels: combustion is very exothermic.
  • Complete (plenty of oxygen): CO2 and H2O.
  • C8H18 + 12½O2 → 8CO2 + 9H2O
  • Incomplete (limited oxygen): CO and/or C (soot), plus H2O.
  • C8H18 + 8½O2 → 8CO + 9H2O · C8H18 + 4½O2 → 8C + 9H2O
  • Carbon monoxide is toxic: it binds to haemoglobin more strongly than oxygen, so blood carries less oxygen.
  • CO is colourless and odourless: you can't tell it's there.
Quick check
?Methane burns in a limited supply of oxygen. Which equation represents an incomplete combustion of methane?
Mission 1

Where exhaust pollutants come from

Where the pollutants in car exhaust come fromfuel + airexhaustsourcein the exhaustfuel carbonunburned fuelfuel sulfurair: N2, O2CO2COC (soot)unburnedhydrocarbonsSO2NOx
  • Carbon monoxide and carbon (soot particulates): incomplete combustion of the fuel's carbon.
  • Unburned hydrocarbons: fuel that doesn't burn at all.
  • Nitrogen oxides (NOx): from the air. At engine temperatures N2 and O2 react: N2 + O2 → 2NO. Then 2NO + O2 → 2NO2.
  • Sulfur dioxide: from sulfur impurities in the fuel: S + O2 → SO2.
  • Carbon dioxide: from complete combustion. Not poisonous at these levels, but a greenhouse gas.
Mission 1

Why the pollutants matter

  • CO: toxic.
  • NOx and SO2 are acidic oxides: they dissolve in rainwater to give acid rain.
  • SO2 + H2O → H2SO3, then oxidised to H2SO4. 4NO2 + O2 + 2H2O → 4HNO3.
  • Acid rain damages limestone buildings, lakes, forests.
Quick check
?Which pollutant in car exhaust forms from the air rather than from the fuel?
Mission 1

Fossil fuels: benefits and drawbacks

  • Benefits: lots of energy per kilogram · easy to store and transport · existing engines and power stations use them.
  • Drawbacks: non-renewable · CO2 adds to the greenhouse effect and climate change.
  • Acidic gases (SO2, NOx) → acid rain.
  • CO from incomplete combustion is toxic.
Mission check

?A gas heater burns methane in a small room. The window is shut and the air vent is blocked. Why is this dangerous?
Mission 2

Mission 2: Why does bromine in hexane stay orange in the dark but lose its colour in sunlight?

Make a guess: Why does bromine in hexane stay orange in the dark but lose its colour in sunlight?

Mission 2

Radicals

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Radicals: the chlorine radical and the methyl radicalChlorine radical, Cl•Clunpaired electron3 pairs + 1 = 7 outerelectrons · neutralMethyl radical, CH3•CHHHunpaired electron4 + 3 = 7 outerelectrons · neutral
  • A radical is a species with an unpaired electron.
  • A dot marks the unpaired electron: Cl•, CH3•.
  • The dot is not a charge. These radicals are neutral.
  • Odd number of outer electrons → one is unpaired. CH3•: 4 + 3 = 7.
  • Radicals are highly reactive: the unpaired electron pairs up by forming a new bond.
Quick check
?Which statement about the chlorine radical, Cl•, is correct?
Mission 2

Two ways a bond can break

Homolytic and heterolytic fissionHomolytic fissionClClCl+ClHeterolytic fissionHClδ+δ−H+Cl
  • Homolytic fission: one electron to each atom → two radicals. Cl–Cl → Cl• + Cl•
  • Heterolytic fission: both electrons to one atom → two ions. H–Cl → H⁺ + Cl⁻
  • The atom that takes the pair becomes negative.
  • Nucleophile: donates an electron pair. Electrophile: accepts an electron pair.
  • Radicals react by pairing their single electron; they are neither.
  • Radical reactions use homolytic fission. (Heterolytic fission comes up again in a later mission.)
Mission 2

Background: fish-hook arrows

Homolytic and heterolytic fissionHomolytic fissionClClCl+ClHeterolytic fissionHClδ+δ−H+Clone barb = one electrontwo barbs = an electron pair
  • A fish-hook (half) arrow has one barb: it moves one electron.
  • A full curly arrow (two barbs) moves an electron pair.
  • Cl2 splitting: two fish-hooks, each from the Cl–Cl bond to a different Cl atom.
  • The core skill is writing each step as an equation with dots.
Mission 2

Initiation

Initiation: chlorine splits in UV light, and the bond enthalpy barsCl2UV light2Clbond enthalpy / kJ mol−10100200300400500243Cl–Cl413C–Hweakest bondbreaks
  • Methane and chlorine don't react in the dark. In UV light they do.
  • Initiation: UV light splits the halogen homolytically: Cl2 → 2Cl•
  • Cl–Cl breaks because it is the weakest bond present: Cl–Cl 243, C–H 413 kJ mol⁻¹.
  • Br–Br is weaker still (193 kJ mol⁻¹): even sunlight splits it.
  • Initiation makes radicals.
Quick check
?Methane reacts with bromine in ultraviolet (UV) light. Which equation represents the initiation step?
Mission 2

Propagation: the chain

The chain reaction of methane and chlorine: initiation, propagation cycle, terminationCl2 + UVinitiationCl•propagation1Cl• + CH4 → HCl + CH3•CH3• goes on2CH3• + Cl2 → CH3Cl + Cl•Cl• fed backtwo radicals meet:termination
  • Propagation: radical + molecule → new molecule + new radical.
  • Step 1: CH4 + Cl• → CH3• + HCl (Cl• removes an H atom)
  • Step 2: CH3• + Cl2 → CH3Cl + Cl•
  • Cl• is regenerated, so steps 1 and 2 repeat: a chain reaction.
  • Add the two steps: CH4 + Cl2 → CH3Cl + HCl.
  • No H• ever forms.
Mission 2

Termination

  • Termination: two radicals combine. Radicals are removed.
  • Cl• + Cl• → Cl2
  • CH3• + Cl• → CH3Cl
  • CH3• + CH3• → C2H6 (so a trace of ethane appears)
  • Radicals are scarce, so termination is rare: most product forms in propagation.
Quick check
?2,2-dimethylpropane, C5H12, reacts with chlorine in UV light. Four steps of the mechanism are:
P: C5H11• + Cl2 → C5H11Cl + Cl•
Q: Cl2 → 2Cl•
R: C5H11• + Cl• → C5H11Cl
S: C5H12 + Cl• → C5H11• + HCl
Which sequence gives initiation, then the two propagation steps in the order they happen, then termination?
Mission 2

A mixture of products

  • Cl• attacks CH3Cl too: CH3Cl + Cl• → CH2Cl• + HCl, then CH2Cl• + Cl2 → CH2Cl2 + Cl•.
  • Further substitution goes on to CHCl3 and CCl4.
  • More Cl2 gives more of the highly substituted products.
Mission 2

Back to the hook: bromine in hexane

  • In the dark: no light to split Br2, so no radicals. No reaction; it stays orange.
  • In sunlight: Br2 → 2Br•.
  • C6H14 + Br• → C6H13• + HBr, then C6H13• + Br2 → C6H13Br + Br•.
  • Overall: C6H14 + Br2 → C6H13Br + HBr. Br2 is used up, so the orange fades.
Quick check
?The products of the reaction of methane with chlorine in UV light include CH2Cl2, CHCl3 and CCl4. How are most of these more highly substituted products formed?
Mission 2

Why alkanes are so unreactive

  • C–C and C–H bonds are strong: breaking them needs a lot of energy.
  • C and H have similar electronegativities: the bonds are almost non-polar.
  • No δ+ or δ− sites, so polar reagents are not attracted.
  • Only very reactive species, such as radicals, attack alkanes.
  • That's why the bromine needs light: light makes the radicals.
Mission check

?A mixture of methane and chlorine does not react in the dark. A single brief flash of UV light splits a few Cl2 molecules, yet many CH3Cl molecules form for each Cl2 split. Which explains this?
Mission 3

Mission 3: Why does an alkene take bromine's colour away in the dark, when an alkane needs light?

Make a guess: Why does an alkene take bromine's colour away in the dark, when an alkane needs light?

Mission 3

Electrophiles

  • An electrophile is an electron pair acceptor.
  • It is electron-deficient: H⁺, or the δ+ atom of a polar molecule.
  • No charge needed: HBr (through Hδ+) and Br2 act as electrophiles.
  • Heterolytic fission: a bond breaks and both electrons go to one atom, forming two ions.
  • Radical reactions (see Mission 2) use homolytic fission instead: one electron to each atom.
Quick check
?Which set contains only species that can act as electrophiles?
Mission 3

Why alkenes attract electrophiles

Alkene and alkane comparedetheneethaneCCHHHHhigh electrondensityEelectron-poorCCHHHHHHneeds light→ Br•
  • Alkenes are unsaturated: they contain a C=C bond, so they can add more atoms.
  • The C=C bond is a region of high electron density.
  • It attracts electrophiles and donates an electron pair to them.
  • Alkanes have only C–C and C–H σ bonds: no electron-rich site. They react with bromine only when light makes Br• radicals.
  • The reagent adds across C=C. Double becomes single; nothing is lost: electrophilic addition.
Mission 3

The test for C=C

Bromine water testbromine water · dark · room temperaturealkeneorangecolourlessalkaneorangestill orange
  • Shake with bromine water, at room temperature, in the dark.
  • Alkene: orange → colourless. Alkane: stays orange.
  • With Br2 in an organic solvent: CH2=CH2 + Br2 → CH2BrCH2Br.
  • In bromine water, water also adds and much of the product is BrCH2CH2OH. The colour change is the same.
Quick check
?Ethene is bubbled through a solution of bromine in an organic solvent at room temperature, in the dark. Which statement is correct?
Mission 3

Adding halogens and hydrogen halides

Addition products of alkeneshalogen · room temperatureCH2=CH2 + Br2CH2BrCH2Br1,2-dibromoethaneCH2=CH2 + Cl2CH2ClCH2Cl1,2-dichloroethanehydrogen halide · room temperatureCH2=CH2 + HBrCH3CH2BrbromoethaneCH2=CH2 + HClCH3CH2Clchloroethane+HBrBrHcyclohexenebromocyclohexane
  • Room temperature. Each reagent adds one part to each C=C carbon.
  • CH2=CH2 + Br2 → CH2BrCH2Br, 1,2-dibromoethane.
  • CH2=CH2 + Cl2 → CH2ClCH2Cl, 1,2-dichloroethane.
  • CH2=CH2 + HBr → CH3CH2Br, bromoethane.
  • CH2=CH2 + HCl → CH3CH2Cl, chloroethane.
  • Cyclohexene + HBr → bromocyclohexane.
  • Unsymmetrical alkenes, such as propene, can give two products: Mission 5.
Mission 3

Adding water

Addition of water to alkeneswater + acid catalystCH2=CH2 + H2OCH3CH2OHsteamH3PO4 catalystethanol+H2OOHHsame catalystcyclohexenecyclohexanol
  • Steam + an acid catalyst (e.g. H3PO4) adds H to one carbon and OH to the other.
  • CH2=CH2 + H2O → CH3CH2OH, ethanol. This is how ethanol is made industrially.
  • Cyclohexene + H2O → cyclohexanol.
Mission 3

Adding hydrogen

Hydrogenation of alkenesCH2=CH2 + H2NiCH3CH3Ni catalyst, about 150 °Cvegetable oil: one chainseveral C=CH2, Nisome C=C → C–Chigher melting point → spread
  • Hydrogenation: H2 adds across C=C, with a nickel catalyst.
  • CH2=CH2 + H2 → CH3CH3. Typical conditions: about 150 °C.
  • Margarine: vegetable oils have many C=C bonds. Hydrogenating some of them raises the melting point, so the oil becomes a soft solid.
  • Relevance: hardening oils for spreads, and turning alkenes into alkanes.
Mission 3

Oxidising C=C with manganate(VII)

  • Shake an alkene with acidified potassium manganate(VII).
  • Purple → colourless: a second test for C=C.
Quick check
?2,3-dimethylbut-2-ene, (CH3)2C=C(CH3)2, reacts with hydrogen bromide. What is the product?
Mission 3

Mechanism: alkene + HBr

Mechanism: ethene plus hydrogen bromideStep 1CH2CH2HBrδ+δ−12etheneStep 2: carbocation + bromide ionCH2CH3Br3Br− lone pair → C+Product: bromoethaneCH3CH2Br
  • H–Br is already polar: Hδ+–Brδ−.
  • Arrow 1: from the C=C bond to the Hδ+.
  • Arrow 2: from the H–Br bond to Br. Heterolytic fission: Br leaves as Br⁻.
  • A carbocation forms: a C⁺ with only three bonds.
  • Arrow 3: from a lone pair on Br⁻ to the C⁺. Product: bromoethane.
  • HCl reacts in the same way.
Mission 3

Mechanism: alkene + bromine

Mechanism: ethene plus bromineStep 1induced dipole in Br2BrBrδ+δ−CH2CH212Step 2: carbocation + bromide ionBrCH2CH2Br3Br− lone pair → C+Product: 1,2-dibromoethaneBrCH2CH2Br
  • The electron-rich C=C repels the Br–Br electrons: an induced dipole, Brδ+–Brδ−.
  • Arrow 1: from the C=C bond to Brδ+.
  • Arrow 2: from the Br–Br bond to Brδ−, which leaves as Br⁻.
  • A carbocation forms. Arrow 3: from a lone pair on Br⁻ to the C⁺. Product: CH2BrCH2Br.
  • No light and no radicals: the C=C itself splits Br2.
  • Cl2 adds the same way.
Quick check
?Ethene reacts with hydrogen bromide by electrophilic addition. Which describes the curly arrows in the first step of the mechanism?
Mission check

?In the dark, at room temperature, but-2-ene quickly decolourises a solution of iodine monochloride, ICl. Butane does not react with it. The product is CH3CHICHClCH3. Which statement explains why but-2-ene reacts without light?
Mission 4

Mission 4: A double bond shares twice as many electrons as a single bond. So why isn't it twice as strong?

Make a guess: A double bond shares twice as many electrons as a single bond. So why isn't it twice as strong?

Mission 4

Sigma bonds

Sigma bondhead-on overlapσ bond: density on the axisCCHHHHHHethane: free rotation
  • σ bond: direct (head-on) overlap of orbitals between two nuclei.
  • Electron density lies on the axis between the nuclei.
  • Every single bond is a σ bond: all C–C and C–H bonds in alkanes.
  • Groups can rotate freely about a σ bond (free rotation).
Mission 4

Pi bonds

Pi bondsideways overlap of p orbitalsσabovebelowone π bond, two lobesethene: all six atoms in one planeCCHHHH120°no rotation
  • π bond: sideways overlap of two p orbitals, one on each atom.
  • Electron density lies above and below the axis, not on it.
  • Double bond = 1σ + 1π. Triple bond = 1σ + 2π.
  • The π bond stops rotation: groups on each C are fixed in place.
  • Restricted rotation about C=C gives E/Z (cis/trans) isomers when each C carries two different groups.
  • Each C of C=C: three bonding regions, trigonal planar, about 120°.
Quick check
dot-and-cross diagram of acrylonitrile. A C atom bonded to two H atoms is joined by a double bond to a second C atom, whCCCNHHH
?The displayed formula of propenenitrile (acrylonitrile), C3H3N, is shown: CH2=CH–C≡N. How many σ bonds and how many π bonds are in one molecule?
Mission 4

Why C=C is shorter and stronger, but not twice as strong

Bond lengths and bond enthalpies of C-C and C=CBond length / pmC–C154C=C134050100150Mean bond enthalpy / kJ mol⁻¹σ 347C–C347σ 347π 265C=C6120200400600dashed: 2 × 347 = 694
  • C–C 154 pm, 347 kJ mol⁻¹. C=C 134 pm, 612 kJ mol⁻¹ (mean, or average, bond enthalpies).
  • Two shared pairs pull the nuclei closer: C=C is shorter and stronger than C–C.
  • But not twice as strong: the π bond is weaker than the σ bond (612 − 347 ≈ 265).
  • Sideways overlap of p orbitals is less effective than head-on overlap.
  • π electrons are exposed above and below the bond: C=C is a region of high electron density. Electrophiles attack it.
  • So alkenes are far more reactive than alkanes.
Quick check
?A student suggests that a π bond between two carbon atoms prevents rotation about the bond that joins them. Which observation does this hypothesis predict?
Mission 4

π overlap round a ring: benzene

Two models of benzeneKekulé modelalternating singleand double bondssix p orbitals,one on each C,overlap sidewaysdelocalised πelectron density,above and belowthe planar ring
  • Kekulé model: a ring of alternating C–C and C=C bonds.
  • Delocalised model: each C uses one p orbital. The six p orbitals overlap sideways all round the ring.
  • This forms a ring of π electron density above and below the plane of the ring: six delocalised electrons.
  • The evidence for this model, and why benzene resists addition, are in a later lesson.
Mission 4

The ring and its substituent: chlorobenzene

Chlorine lone pair and the benzene ringringClchlorobenzene, edge-onlone pair ina p orbitaloverlap with the ring π systemadds double-bond characterClC–Clshorter, strongerClC–Cllonger, weakerchlorobenzene1-chlorobutanelength difference exaggerated
  • In chlorobenzene a lone pair on Cl, in a p orbital, overlaps with the ring's delocalised π system.
  • So the C–Cl bond gains some double-bond character: it is shorter and stronger than in a chloroalkane.
  • Result: chlorobenzene is not hydrolysed by warm aqueous NaOH, unlike 1-chlorobutane.
Mission check

?A C≡C bond is only about 2.4 times as strong as a C–C bond, not 3 times. Which statement explains this?
  • Mean (average) bond enthalpies: C–C 347 kJ mol⁻¹ · C=C 612 kJ mol⁻¹ · C≡C 838 kJ mol⁻¹.
Mission 5

Mission 5: Hydrogen bromide can add to propene two ways round, so why does one product win almost every time?

Make a guess: Hydrogen bromide can add to propene two ways round, so why does one product win almost every time?

Mission 5

Two ways round

Two ways round123+ HBrpropeneH to C1H to C2BrH1232-bromopropaneBrH1231-bromopropane
  • Propene, CH3CH=CH2, is unsymmetrical: its two C=C carbons carry different groups.
  • H–Br can add two ways:
  • H to C1, Br to C2 → CH3CHBrCH3, 2-bromopropane.
  • H to C2, Br to C1 → CH3CH2CH2Br, 1-bromopropane.
  • The H⁺ adds first. Where it goes decides where the C⁺ ends up, and so where Br goes.
Mission 5

Carbocations: primary, secondary, tertiary

Carbocations: primary, secondary and tertiaryprimaryCCH2CH3HHCH3CH2CH2+secondaryCHCH3CH3CH3CH+CH3tertiaryCCH3CH3CH3(CH3)3C+least stablemost stable
  • Count the carbon (alkyl) groups bonded to the C⁺.
  • Primary: one, e.g. CH3CH2CH2⁺. Secondary: two, e.g. CH3CH⁺CH3. Tertiary: three, e.g. (CH3)3C⁺.
  • Stability: tertiary > secondary > primary.
  • Why: alkyl groups are electron-releasing. They push electron density towards C⁺.
  • More alkyl groups spread the positive charge more, so the ion is more stable.
Quick check
?Which carbocation is the most stable?
Mission 5

The more stable carbocation wins

Two routes, one winnerpropene + HBrsecondarycarbocationCH3CH+CH3CH3CHBrCH32-bromopropaneMAJORprimarycarbocationCH3CH2CH2+CH3CH2CH2Br1-bromopropaneminorenergyprogress of reactionprimarysecondarylower activationenergy → faster
  • Route 1: H⁺ to C1 (the CH2 end) → secondary CH3CH⁺CH3.
  • Route 2: H⁺ to C2 → primary CH3CH2CH2⁺.
  • The route via the more stable carbocation has the lower activation energy, so it is much faster.
  • So 2-bromopropane is the major product; 1-bromopropane is the minor product.
  • The pattern is often called Markovnikov's rule. Explain it by carbocation stability.
Mission 5

Drawing it

Mechanism: propene plus hydrogen bromide, major routeStep 1CH3CHCH2HBrδ+δ−12propeneStep 2: carbocation + bromide ionCH3CHCH3Br3Br− lone pair → C+Product: 2-bromopropane (major)CH3CHCH3Br
  • Draw the mechanism through the more stable carbocation for the major product.
  • Arrow 1: from the C=C bond to the Hδ+ of HBr. Arrow 2: from the H–Br bond to Br.
  • H bonds to the CH2 end; C⁺ is on the middle carbon (secondary).
  • Arrow 3: from a lone pair on Br⁻ to that C⁺ → 2-bromopropane.
  • The minor product forms by the same arrows, through the primary carbocation.
Quick check
?2-methylbut-1-ene, CH2=C(CH3)CH2CH3, reacts with hydrogen bromide. What is the major product, and why?
Mission 5

Same rule, other reagents

  • Water with an acid catalyst: propene → mainly propan-2-ol; minor propan-1-ol.
  • The electrophile (H⁺ or Hδ+) adds first. The nucleophile goes to the more substituted carbon.
  • Symmetrical alkenes (e.g. but-2-ene) give one product: no major or minor.
Quick check
?2-methylpropene, (CH3)2C=CH2, reacts with water in the presence of an acid catalyst. What is the major organic product?
Mission check

?1-methylcyclohexene is a six-membered ring with one C=C. One C=C carbon carries a CH3 group and no H; the other carries one H. It reacts with hydrogen bromide. What is the major product, and why?
Mission 6

Mission 6: When a plastic softens in heat, what is breaking?

Make a guess: When a plastic softens in heat, what is breaking?

Mission 6

Polymers

Chains and the forces between themcoolforces between chainsCCCCCcovalent C–C bonds along the chainheated: chains slide apartforces between chains overcomebonds along each chain unchanged
  • A polymer is a very long molecule made of many small monomers joined by covalent bonds.
  • Neighbouring chains are held together only by intermolecular forces.
  • Heat a plastic such as poly(ethene): the chains gain energy, overcome the forces between them and slide past each other. It softens.
  • The covalent bonds along each chain stay intact.
Mission 6

Addition polymerisation

Addition polymerisation of propeneCH2CHCH3CH2CHCH3CH2CHCH3++three propene moleculesC=C bonds openCH3CH3CH3section of poly(propene)repeating unitCH3n
  • One bond of each monomer's C=C breaks. The carbons join neighbouring monomers by single bonds.
  • Nothing else is made: the polymer contains every atom of the monomers.
  • Ethene → poly(ethene): [–CH2–CH2–]n.
  • Propene → poly(propene): [–CH2–CH(CH3)–]n. The CH3 is a side group.
  • The repeating unit has the two former C=C carbons in the chain, with extension bonds at each end.
  • Substituted alkenes too: chloroethene, CH2=CHCl → poly(chloroethene), PVC.
Quick check
?Propene, CH2=CHCH3, forms the addition polymer poly(propene), written as [repeating unit]n. Which option gives the repeating unit and describes it correctly?
Mission 6

Back to the monomer

From a PVC section back to its monomerClCla section of the chainone unitextension bonds off,C=C put inCH2CHClmonomer: Cl on the same carbon
  • In a section of chain, find the repeating unit: two main-chain carbons for an addition polymer.
  • Keep each side group on the carbon it is attached to.
  • Remove the extension bonds and put a C=C between the two carbons.
  • –CH2–CHCl–CH2–CHCl– → repeating unit –CH2–CHCl– → monomer CH2=CHCl.
  • Check: the monomer has the same atoms as the repeating unit.
Quick check
?A section of an addition polymer is –CH2–C(CH3)2–CH2–C(CH3)2–CH2–C(CH3)2–. Which is the monomer?
Mission 6

Why polyalkenes matter

  • Made cheaply on a huge scale from alkenes, mostly from crude oil.
  • Poly(ethene): bags, films, bottles. Poly(propene): crates, rope, fibres.
  • PVC: pipes, window frames, cable insulation. Poly(phenylethene): packaging, insulation.
  • PTFE, poly(tetrafluoroethene): non-stick coatings.
  • Light, strong, unreactive and easy to mould: they replaced metal, glass, wood and paper in many uses.
Mission 6

Addition vs condensation

Addition and condensation polymerisationadditionCH2CHClClnno by-productcondensationHO–R–OH+HOOC–R′–COOHROCR′COROOH2O lostester linkH2O lostester link
  • Addition: monomers have a C=C. No other product. Main chain of carbon atoms only.
  • Condensation: each monomer has two functional groups (e.g. –OH, –COOH, –NH2).
  • A small molecule (H2O or HCl) is lost at each link. The chain contains ester or amide links.
  • Spot the type from the monomer: C=C → addition; two reacting groups → condensation.
Mission check

?Poly(propene) can be heated until soft, moulded into a new shape, and cooled. The same plastic can be remoulded many times, and its chemical properties do not change. Which statement explains this?
Recap

The big ideas

Mission 1

  • Alkanes burn completely to CO2 and H2O; with limited oxygen they give toxic CO and soot.

Mission 2

  • Light splits Cl2 or Br2 homolytically into radicals (initiation).
  • Propagation: radical + molecule → molecule + radical, so the chain repeats; termination: two radicals combine.

Mission 3

  • C=C is electron-rich, so alkenes undergo electrophilic addition with Br2, HX and H2O (acid catalyst).
  • Mechanism: C=C → δ+ atom; bond → δ− atom; lone pair of the anion → C⁺.
  • Bromine water: orange → colourless with C=C.
  • H2 adds over a nickel catalyst.

Mission 4

  • σ: head-on overlap, on the axis. π: sideways p overlap, above and below; weaker; stops rotation. Double = σ + π; triple = σ + 2π.
  • Benzene: six p orbitals overlap sideways to give a delocalised π ring (evidence in a later lesson).

Mission 5

  • Unsymmetrical alkene + HX: two carbocations possible. Stability: tertiary > secondary > primary.
  • The more stable carbocation forms faster, giving the major product; the other route gives the minor product.
  • Alkyl groups release electron density towards C⁺, spreading its charge.

Mission 6

  • Addition polymer: C=C opens; repeating unit = two main-chain carbons with their side groups; monomer has the same atoms.
  • Softening overcomes intermolecular forces between chains; covalent bonds stay intact.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Hydrocarbons for Eduqas A-level Chemistry. 🎉

  1. Mission 1A fuel made only of carbon and hydrogen burns in air. Where do the poisonous gases in its exhaust come from?
  2. Mission 2Why does bromine in hexane stay orange in the dark but lose its colour in sunlight?
  3. Mission 3Why does an alkene take bromine's colour away in the dark, when an alkane needs light?
  4. Mission 4A double bond shares twice as many electrons as a single bond. So why isn't it twice as strong?
  5. Mission 5Hydrogen bromide can add to propene two ways round, so why does one product win almost every time?
  6. Mission 6When a plastic softens in heat, what is breaking?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to A-Level Chemistry · Eduqas