← A-Level Chemistry · Eduqas · A-Level Chemistry revision
⭐ 0
Eduqas A-level Chemistry (A410QS) · OA2.3 Carboxylic acids and their derivatives
Mini-Lesson

Carboxylic acids and their derivatives

3 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1Swap one hydrogen for a carbon chain: why does a sour acid become a sweet-smelling liquid?
  2. Mission 2Why does ethanoyl chloride fume in moist air, when ethanoic acid just sits in the bottle?
  3. Mission 3How can a chemist make a molecule's carbon chain exactly one atom longer?
Mission 1

Mission 1: Swap one hydrogen for a carbon chain: why does a sour acid become a sweet-smelling liquid?

Make a guess: Swap one hydrogen for a carbon chain: why does a sour acid become a sweet-smelling liquid?

Mission 1

Acids and esters: the structures

Acid and estercarboxylic acidCH3OOHethanoic acidesterCH3OOCH3methyl ethanoateethanoatemethylfrom ethanoic acidfrom methanol
  • Carboxylic acid: –COOH. Ethanoic acid, CH3COOH.
  • Ester: –COO– with a carbon on both sides. RCOOR′.
  • An ester is an acid with the O–H hydrogen replaced by an alkyl group.
  • Name: alkyl (from the alcohol) + -oate (from the acid).
  • Methyl ethanoate, CH3COOCH3. Ethyl propanoate, CH3CH2COOCH2CH3.
Mission 1

Weak acids that still make salts

  • CH3COOH ⇌ CH3COO⁻ + H⁺: only partly dissociates. A weak acid.
  • Alkali: CH3COOH + NaOH → CH3COONa + H2O
  • Carbonate: 2CH3COOH + Na2CO3 → 2CH3COONa + CO2 + H2O
  • Hydrogencarbonate: CH3COOH + NaHCO3 → CH3COONa + CO2 + H2O
  • Salts are named -oate: sodium ethanoate.
Mission 1

The carbonate test

Carbonate test for a carboxylic acidethanoic acid+ NaHCO3fizzeslimewaterturns milkyCO2
  • Add sodium carbonate: effervescence.
  • Eduqas test: sodium hydrogencarbonate: effervescence.
  • The gas turns limewater milky: CO2.
  • Alcohols, aldehydes, ketones and esters: no fizzing.
Quick check
?0.010 mol of ethanoic acid reacts with excess sodium carbonate. What amount of carbon dioxide forms?
Mission 1

Order of acidity

Order of acidity: stability of the anionethanoatecharge on both OCH3OOδ−δ−phenoxidecharge spreadsinto the ringOδ−δ−δ−ethoxidealkyl group pusheselectrons onto OC2H5Oacid strengthcarboxylic acidphenolwateralcoholstrongestweakest
  • Carboxylic acid > phenol > water > alcohol.
  • The more stable the negative ion left behind, the stronger the acid.
  • RCOO⁻: charge delocalised over two O atoms. Most stable.
  • C6H5O⁻: charge partly delocalised into the ring.
  • RO⁻: the alkyl group pushes electrons onto the O. Least stable.
  • Show it: NaHCO3 fizzes only with the acid.
  • Show it: NaOH(aq) dissolves phenol (sodium phenoxide forms); ethanol shows no change.
  • Show it: sodium fizzes more vigorously with water than with ethanol.
Mission 1

Making carboxylic acids

  • Oxidise a primary alcohol or an aldehyde: reflux with excess acidified K2Cr2O7 (orange → green).
  • CH3CH2OH + 2[O] → CH3COOH + H2O
  • Side-chain oxidation: reflux methylbenzene with alkaline KMnO4, then acidify.
  • C6H5CH3 + 3[O] → C6H5COOH + H2O (benzoic acid)
Mission 1

Reducing, chlorinating and decarboxylating acids

  • LiAlH4 in dry ether reduces the acid to a primary alcohol.
  • CH3COOH + 4[H] → CH3CH2OH + H2O
  • NaBH4 is not strong enough to reduce acids.
  • PCl5: CH3COOH + PCl5 → CH3COCl + POCl3 + HCl (steamy fumes).
  • Decarboxylation: heat the sodium salt with soda lime. One carbon is lost.
  • CH3COONa + NaOH → CH4 + Na2CO3
Quick check
?Propanoic acid, CH3CH2COOH, is treated with LiAlH4 in dry ether, followed by dilute acid. What is the organic product?
Mission 1

Esterification

Esterificationacid + alcoholOOH+OHethanoic acidethanolconc. H2SO4catalystester + waterOO+H2Oethyl ethanoatewater
  • Carboxylic acid + alcohol ⇌ ester + water
  • CH3COOH + CH3CH2OH ⇌ CH3COOCH2CH3 + H2O
  • Catalyst: concentrated H2SO4. Warm or reflux.
  • Reversible: an excess of one reactant gives a higher yield.
  • The water forms from the acid's –OH and the alcohol's H.
  • Esters also form from acyl chlorides and alcohols (see Mission 2).
Mission 1

Preparing a liquid ester

Preparing a liquid ester1reflux2distilcrude ester3wash, ventNa2CO3(aq)4dryanhydrous CaCl25redistil74–79 °C6pure esterb.p. 77 °Cesteraqueousester
  • Example: ethyl ethanoate, b.p. 77 °C.
  • 1. Reflux ethanoic acid, ethanol and a few drops of conc H2SO4 (anti-bumping granules).
  • 2. Distil off the crude ester.
  • 3. Shake with Na2CO3(aq) in a separating funnel to remove acid; vent (CO2 forms). Run off the lower aqueous layer: the ester is the upper layer.
  • 4. Dry with anhydrous calcium chloride.
  • 5. Redistil, collecting at about 74–79 °C.
Quick check
?Propanoic acid is warmed with methanol and a few drops of concentrated sulfuric acid. What ester forms?
Mission 1

Hydrolysis: splitting the ester

Hydrolysis of an esterOOthis bondbreaksethyl ethanoatediluteH2SO4(aq)NaOH(aq)refluxCH3COOH+ CH3CH2OHreversibleCH3COONa+ CH3CH2OHcomplete+ strongacidCH3COOHethanoic acid
  • Acid: reflux with dilute H2SO4(aq). Reversible; does not go to completion.
  • CH3COOCH2CH3 + H2O ⇌ CH3COOH + CH3CH2OH
  • Alkali: reflux with NaOH(aq). Goes to completion.
  • CH3COOCH2CH3 + NaOH → CH3COONa + CH3CH2OH
  • The carboxylate ion cannot react with the alcohol, so it does not reverse.
  • Add strong acid afterwards to get the free carboxylic acid.
Quick check
?Methyl propanoate, CH3CH2COOCH3, is heated under reflux with sodium hydroxide solution. What are the products?
Mission check

?Two bottles, X and Y, each hold a liquid of formula C3H6O2. One is propanoic acid; the other is methyl ethanoate.
X: boils at 141 °C, fizzes with sodium carbonate.
Y: boils at 57 °C, smells fruity, no fizzing.
Which statement is correct?
Mission 2

Mission 2: Why does ethanoyl chloride fume in moist air, when ethanoic acid just sits in the bottle?

Make a guess: Why does ethanoyl chloride fume in moist air, when ethanoic acid just sits in the bottle?

Mission 2

Meet the acid derivatives

Acid derivatives of ethanoic acidCH3OOHethanoic acidCH3OClethanoyl chlorideCH3ONH2ethanamideCH3ONHCH3N-methylethanamide–OHgroup that replaces –OH
  • Swap the –OH of a carboxylic acid for another group: an acid derivative.
  • Acyl chloride: –COCl. Ethanoyl chloride, CH3COCl. Name ends -oyl chloride.
  • Amide: –CONH2. Ethanamide, CH3CONH2 (a primary amide).
  • N-substituted amides, e.g. CH3CONHCH3, form from amines.
Mission 2

Making an acyl chloride

Making ethanoyl chlorideHCl (and SO2) gasesdrying tubeethanoic acid + PCl5or SOCl2↑ gasPCl5CH3COOH + PCl5→ CH3COCl + POCl3 + HCl ↑SOCl2CH3COOH + SOCl2→ CH3COCl + SO2 ↑ + HCl ↑
  • Start from the carboxylic acid. Dry conditions: water destroys the product.
  • PCl5 (from Mission 1): CH3COOH + PCl5 → CH3COCl + POCl3 + HCl
  • Steamy fumes of HCl. The acyl chloride is separated by distillation.
  • SOCl2 also works: CH3COOH + SOCl2 → CH3COCl + SO2 + HCl
Mission 2

Why so reactive?

Why ethanoyl chloride is so reactiveethanoyl chlorideethanoic acidvery δ+ carbonless δ+ carbonCH3OClδ+δ−δ−CH3OOHδ+δ−δ−H2Olone pair
  • The carbonyl carbon is bonded to two electronegative atoms: O and Cl.
  • So it is strongly δ+: a target for any nucleophile with a lone pair.
  • Chlorine then leaves easily as Cl⁻: a good leaving group.
  • So acyl chlorides react at room temperature, often violently. No catalyst.
  • In a carboxylic acid the C is less δ+, and –OH is a poor leaving group.
  • So, the opening question: water vapour in the air hydrolyses it. The "fumes" are HCl.
Quick check
?Ethanoyl chloride reacts with cold water within seconds. Ethanoic acid can stay in water for years without changing. Which explains the difference?
Mission 2

Four nucleophiles, one pattern

Ethanoyl chloride with four nucleophilesCH3COClethanoylchloride+ H2O→ CH3COOH + HClethanoic acid+ C2H5OH→ CH3COOC2H5 + HClethyl ethanoate (ester)+ 2NH3→ CH3CONH2 + NH4Clethanamide (primary amide)+ 2CH3NH2→ CH3CONHCH3 + CH3NH3+Cl−N-methylethanamide+ C6H5OH→ CH3COOC6H5 + HClphenyl ethanoate (ester)
  • The nucleophile swaps in for Cl. HCl is the other product.
  • Water → carboxylic acid: CH3COCl + H2O → CH3COOH + HCl
  • Alcohol → ester: CH3COCl + CH3CH2OH → CH3COOCH2CH3 + HCl. Fast, and not reversible.
  • Ammonia → primary amide:
  • CH3COCl + 2NH3 → CH3CONH2 + NH4Cl. The second NH3 takes up the HCl.
  • Primary amine → N-substituted amide: CH3COCl + 2CH3NH2 → CH3CONHCH3 + CH3NH3⁺Cl⁻
  • Phenol → ester: CH3COCl + C6H5OH → CH3COOC6H5 + HCl (phenyl ethanoate). Carboxylic acids barely esterify phenol.
  • So acids → acid chlorides → esters or amides: a quick two-step route.
Quick check
?Ethanoyl chloride is added dropwise to an excess of ethylamine, CH3CH2NH2. Which two products form?
Mission check

?Chloroethane, CH3CH2Cl, and ethanoyl chloride, CH3COCl, are each added to cold water. What do you see, and why?
Mission 3

Mission 3: How can a chemist make a molecule's carbon chain exactly one atom longer?

Make a guess: How can a chemist make a molecule's carbon chain exactly one atom longer?

Mission 3

Building the skeleton

Cyanide adds one carbon to a chainBeforeCC2 C chainCNnew C–C bondcyanide ionAfterCCCN3 C chain
  • Most organic reactions only swap functional groups. The carbon chain stays the same length.
  • To make a longer chain, you need a reaction that forms a new C–C bond.
  • The trick: a carbon nucleophile, a carbon atom with a lone pair or a δ− charge.
  • Cyanide, ⁻:C≡N, is the simplest: it adds one carbon.
Mission 3

Cyanide + halogenoalkane

Cyanide ion and bromoethane: nucleophilic substitutionNCCHH3CHBrδ+δ−12cyanide ionbromoethaneH3CCH2CN+Brpropanenitrile1C lone pair → δ+ C2C–Br bond → Br
  • Reagent: KCN in ethanol, heat under reflux.
  • CH3CH2Br + CN⁻ → CH3CH2CN + Br⁻
  • Product: propanenitrile. The chain grows from 2 C to 3 C.
  • Naming: count the C≡N carbon in the chain. CH3CH2CN is propanenitrile.
  • Mechanism: nucleophilic substitution. Lone pair on the C of CN⁻ attacks the δ+ C; the C–Br electrons go to Br.
  • KCN is highly toxic. Acid turns cyanide into HCN gas, so cyanide and acid only ever meet in a fume cupboard, in small amounts, under controlled conditions.
Mission 3

Cyanide + carbonyl

Cyanide adds to a carbonyl: ethanal to a hydroxynitrileHCN, with KCN to supply CN−Step 1NCCOHH3Cδ+δ−12cyanide ionethanalStep 2: protonation by HCNCOH3CHCNalkoxide ionHCN34HCNH3CCHCNOH2-hydroxypropanenitrile+NCregenerated
  • Aldehydes and ketones add cyanide across C=O: hydroxynitriles.
  • Reagent: HCN, with KCN to supply CN⁻.
  • CH3CHO → CH3CH(OH)CN, 2-hydroxypropanenitrile. Chain: 2 C → 3 C.
  • Mechanism: nucleophilic addition. Product is racemic when the new C is chiral.
  • Hazards: HCN is a very toxic gas, and cyanide salts are toxic too. Fume cupboard, gloves, small amounts.
Quick check
?1-Bromobutane is heated under reflux with potassium cyanide in ethanol. What is the organic product?
Mission 3

Nitrile → carboxylic acid

Propanenitrile: reduce to an amine or hydrolyse to an acidpropanenitrileH3CCH2CNreduceLiAlH4 indry etherCH3CH2CH2NH2propylaminehydrolysedilute HCl,refluxCH3CH2COOHpropanoic acid+ NH4Clhydrolyse with alkaliNaOH(aq), refluxCH3CH2COO− Na+ + NH3then dilute acid gives CH3CH2COOH
  • Acid hydrolysis: heat under reflux with dilute HCl.
  • CH3CH2CN + 2H2O + HCl → CH3CH2COOH + NH4Cl
  • The C≡N carbon becomes the –COOH carbon.
  • Alkaline hydrolysis: reflux with NaOH(aq). CH3CH2CN + NaOH + H2O → CH3CH2COONa + NH3
  • This gives the salt. Add dilute acid to release the carboxylic acid.
  • From a hydroxynitrile: CH3CH(OH)CN → CH3CH(OH)COOH, 2-hydroxypropanoic acid (lactic acid).
Mission 3

Nitrile → amine

Propanenitrile: reduce to an amine or hydrolyse to an acidpropanenitrileH3CCH2CNreduceLiAlH4 indry etherCH3CH2CH2NH2propylaminehydrolysedilute HCl,refluxCH3CH2COOHpropanoic acid+ NH4Clhydrolyse with alkaliNaOH(aq), refluxCH3CH2COO− Na+ + NH3then dilute acid gives CH3CH2COOH
  • Reduction with LiAlH4 in dry ether: CH3CH2CN + 4[H] → CH3CH2CH2NH2
  • Product: propylamine (propan-1-amine), one carbon longer than bromoethane.
  • Unlike ammonia + halogenoalkane, this gives only the primary amine: no further substitution.
Mission 3

Amides and nitriles

Ethanoic acid to ethanenitrile: the carbon count stays at twoH3CCOOHethanoicacid2 CH3CCOClethanoylchloride2 CH3CCONH2ethanamide2 CH3CCNethanenitrile2 CPCl5concentrated NH3P4O10, heat−H2O
  • Acid → amide: make the acyl chloride (e.g. with PCl5), then add concentrated ammonia. CH3COCl + 2NH3 → CH3CONH2 + NH4Cl
  • Amide → nitrile: heat with phosphorus(V) oxide, P4O10, which removes water. CH3CONH2 → CH3CN + H2O
  • This route keeps the same number of carbons. Cyanide + halogenoalkane adds one.
  • Amides hydrolyse like nitriles. Acid gives RCOOH + NH4⁺; alkali gives RCOO⁻ + NH3.
Quick check
?2-Hydroxypropanenitrile, CH3CH(OH)CN, is heated under reflux with dilute hydrochloric acid. What is the organic product?
Mission check

?Bromomethane, CH3Br, has one carbon. Which route turns it into ethylamine, CH3CH2NH2?
Recap

The big ideas

Mission 1

  • Acid → ester: the O–H hydrogen is replaced by an alkyl group. No acidity, no hydrogen bonding between molecules.
  • Esters form with an acid catalyst (reversible) and hydrolyse with acid (reversible) or alkali (complete, gives the salt).

Mission 2

  • Acyl chlorides: δ+ carbonyl C and Cl⁻ leaving group. Water → acid, alcohol → ester, NH3 → amide, amine → N-substituted amide; HCl formed.

Mission 3

  • CN⁻ adds one carbon: with halogenoalkanes (substitution) or carbonyls (addition).
  • Nitriles can be reduced to amines.
  • Nitriles can be hydrolysed to carboxylic acids.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Carboxylic acids and their derivatives for Eduqas A-level Chemistry. 🎉

  1. Mission 1Swap one hydrogen for a carbon chain: why does a sour acid become a sweet-smelling liquid?
  2. Mission 2Why does ethanoyl chloride fume in moist air, when ethanoic acid just sits in the bottle?
  3. Mission 3How can a chemist make a molecule's carbon chain exactly one atom longer?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to A-Level Chemistry · Eduqas