← A-Level Chemistry · Eduqas · A-Level Chemistry revision
⭐ 0
Eduqas A-level Chemistry (A410QS) · C1.4 Bonding
Mini-Lesson

Bonding

3 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1Air is 78% nitrogen. Why does almost nothing react with it?
  2. Mission 2Water and carbon dioxide both have three atoms. Why is one bent and the other straight?
  3. Mission 3Water and methane molecules have almost the same mass. Why does water boil over 260 °C higher?
Mission 1

Mission 1: Air is 78% nitrogen. Why does almost nothing react with it?

Make a guess: Air is 78% nitrogen. Why does almost nothing react with it?

Mission 1

What a covalent bond is

Covalent bond++attractattractrepelrepelshared pairBoth nuclei attract the shared pair.The two nuclei repel each other.Bond length: attraction = repulsion.
  • Covalent bond: the strong electrostatic attraction between a shared pair of electrons and the nuclei of the two bonded atoms.
  • The pair sits between the nuclei; both pull on it, holding the atoms together.
  • Too close, and the two nuclei repel: the bond length is where attraction and repulsion balance.
  • Lone pair: a pair of outer electrons not used in bonding.
  • Octet rule: atoms tend to end up with eight outer electrons. A tendency, not a law.
Quick check
?What holds the hydrogen atom and the chlorine atom together in a molecule of hydrogen chloride, HCl?
Mission 1

Drawing the electrons

Dot-and-cross diagrams of CO2, N2 and the hydroxide ionOCOCO₂ · 16 outer e⁻NNNNN₂ · 10 outer e⁻OH−▲ extra e⁻[OH]⁻ · 8 outer e⁻
  • A dot-and-cross diagram shows every outer electron: one atom's as dots, the other's as crosses.
  • 1. Count the outer electrons. Add one per negative charge; remove one per positive charge.
  • 2. Join the atoms by single bonds. 3. Complete the outer atoms' octets with lone pairs.
  • 4. Spare electrons go on the central atom. Too few? Share more pairs: multiple bonds.
  • CO2: 16 outer electrons. O=C=O, two lone pairs on each O.
  • N2: 10 outer electrons. N≡N, one lone pair on each N.
  • An ion goes in square brackets, charge outside: [O–H]⁻, three lone pairs on O.
  • Draw a covalent bond as a line once you know the pairs.
Mission 1

Fewer than eight

Incomplete octets: BF3 and BeCl2BFFFBeClClBF₃B has 6 e⁻BeCl₂Be has 4 e⁻
  • The octet rule has limitations.
  • BF3: boron's three outer electrons make three bonds. B has only 6.
  • BeCl2: beryllium has only 4.
  • AlCl3 is like BF3: Al has 6, so it can accept a pair.
Quick check
?Boron trichloride, BCl3, is a covalent molecule (boron is in group 13; chlorine is in group 17). In its dot-and-cross diagram, how many electrons are in the outer shell of the boron atom?
Quick check
?Which describes a correct dot-and-cross diagram for the cyanide ion, CN⁻?
Mission 1

Single, double, triple

Single, double and triple carbon-carbon bondsBond length / pmC–C154C=C134C≡C120Mean bond enthalpy / kJ mol⁻¹C–C346C=C614C≡C839More shared pairs: shorter, stronger
  • Single, double and triple bonds share one, two and three pairs.
  • More shared pairs pull the nuclei closer: the bond is shorter and stronger.
BondShared pairsLength / pmMean (average) bond enthalpy / kJ mol⁻¹
C–C1154346
C=C2134614
C≡C3120839
  • For bonds between the same two atoms: the shorter the bond, the stronger it is.
Mission 1

One atom supplies both electrons

Co-ordinate bondsOHHH₂O+H⁺OHHH+[H₃O]⁺Arrow: donor → acceptorAlAlClClClClClClAl₂Cl₆arrows: Cl lone pair → AlNBHHHFFFH₃N → BF₃N donates its lone pair to B
  • Co-ordinate (dative covalent) bond: a shared pair with both electrons from one atom.
  • The donor has a lone pair. The acceptor has room for a pair.
  • H2O + H⁺ → H3O⁺: an O lone pair goes to H⁺. NH3 + H⁺ → NH4⁺ forms the same way.
  • Draw it as an arrow from donor to acceptor: O→H.
  • Once formed, it is identical to the others: all three O–H bonds in H3O⁺ match.
  • Al2Cl6: a Cl lone pair on each AlCl3 unit is donated to the Al of the other. Two dative bonds join the units.
  • NH3·BF3: N donates its lone pair to electron-deficient B.
Quick check
?Ammonia, NH3, reacts with a hydrogen ion, H⁺, to form the ammonium ion, NH4⁺. Which statement about the bonds in NH4⁺ is correct?
Mission check

?Carbon monoxide, CO, has 10 outer electrons, the same as N2. Like N2, it has a triple bond and one lone pair on each atom. Which describes the three shared pairs?
Mission 2

Mission 2: Water and carbon dioxide both have three atoms. Why is one bent and the other straight?

Make a guess: Water and carbon dioxide both have three atoms. Why is one bent and the other straight?

Mission 2

Electron pairs repel

Basic arrangements of electron pairsBeCl₂2 electron pairslinear180°BCl₃3 electron pairstrigonal planar120°CH₄4 electron pairstetrahedral109.5°BeClClBClClClCHHHH
  • Count the electron pairs round the central atom: bonding pairs and lone pairs.
  • A double or triple bond counts as one region, like one pair.
  • They repel, so they get as far apart as possible: VSEPR (valence shell electron pair repulsion).
  • 2 regions: linear, 180°. 3: trigonal planar, 120°. 4: tetrahedral, 109.5°.
  • BeCl2 is linear, BCl3 trigonal planar, CH4 tetrahedral.
Mission 2

Lone pairs and shape

Lone pairs and shapeCO₂ · 180°pairs: linearshape: linearCOOBCl₃ · 120°pairs: trigonal planarshape: trigonal planarBClClClCH₄ · 109.5°pairs: tetrahedralshape: tetrahedralCHHHHNH₃ · ≈ 107°pairs: tetrahedralshape: pyramidalNHHHH₂O · ≈ 104.5°pairs: tetrahedralshape: non-linear (bent)OHH
  • The pairs spread out in 3-D. The shape names only where the atoms are.
PairsLone pairsPairs arrangedShapeExampleAngle
20linearlinearCO2180°
30trigonal planartrigonal planarBCl3120°
40tetrahedraltetrahedralCH4, NH4⁺109.5°
41tetrahedralpyramidalNH3107°
42tetrahedralnon-linear (bent)H2O104.5°
  • Draw 3-D shapes with wedges (towards you) and dashes (away).
Quick check
?Ammonia, NH3, has three bonding pairs and one lone pair around the nitrogen atom. What is its shape?
Mission 2

What sets the angles

  • Lone pairs sit closer to the central atom, so they repel more than bonding pairs.
  • Repulsion: lone pair–lone pair > lone pair–bonding pair > bonding pair–bonding pair.
  • Each lone pair squeezes the bond angles by about 2.5°.
  • CH4 109.5° → NH3 about 107° → H2O about 104.5°.
  • NH4⁺ has four bonding pairs, no lone pair: 109.5°, like CH4.
Quick check
?Predict the H–O–H bond angle in a water molecule, H2O.
Quick check
?Which molecule has four electron pairs arranged tetrahedrally around its central atom, but a non-linear (bent) shape?
Mission 2

Five and six pairs

Five and six electron pairs: PCl5 and SF6PClClClClClaxial (2)equatorial (3)PCl₅trigonal bipyramidalaxial–equatorial: 90°equatorial–equatorial: 120°SFFFFFFSF₆octahedralneighbouringbonds: 90°
  • From period 3 on, a central atom can hold more than eight outer electrons: an expanded octet.
  • Period 2 atoms (B, C, N, O, F) can't.
  • 5 pairs: trigonal bipyramidal. PCl5: three equatorial Cl at 120°, two axial Cl at 90° to them.
  • 6 pairs: octahedral. SF6: every F–S–F angle 90°.
  • Group 3 central atoms can have fewer than eight (BCl3); groups 5–7 can have more (PCl5, SF6, BrF5).
Mission 2

Lone pairs with five or six pairs

Lone pairs with five and six electron pairs5 pairs: lone pairs equatorialSFFFFSF₄see-sawBrFFFBrF₃T-shapedXeFFXeF₂linear6 pairs: lone pairs oppositeBrFFFFFBrF₅square pyramidalIClClClClICl₄⁻square planar
  • Five pairs: lone pairs go equatorial, where they have fewer neighbours at 90°.
  • Six pairs: two lone pairs sit opposite each other, 180° apart.
PairsLone pairsShapeExample
51see-sawSF4
52T-shapedBrF3
53linearXeF2
61square pyramidalBrF5
62square planarICl4⁻
  • Count lone pairs first: outer electrons of the central atom, +1 per negative charge (−1 per positive charge), − electrons used in bonds, ÷ 2. ICl4⁻: (7 + 1 − 4) ÷ 2 = 2.
Quick check
?In xenon tetrafluoride, XeF4, the xenon atom (eight outer electrons) forms a single bond to each of four fluorine atoms. What is the shape of XeF4?
Mission check

Two dot-and-cross diagrams side by side, each drawn with three atoms in a straight horizontal line. Left, labelled BeCl₂BeCl₂Cl₂OClBeClClOCl
?The diagram shows the dot-and-cross diagrams of beryllium chloride, BeCl2, and dichlorine monoxide, Cl2O, each drawn with its three atoms in a straight line. Which deduction about the shape of Cl2O is correct?
Mission 3

Mission 3: Water and methane molecules have almost the same mass. Why does water boil over 260 °C higher?

Make a guess: Water and methane molecules have almost the same mass. Why does water boil over 260 °C higher?

Mission 3

Polar bonds

Bond dipole and electronegativity trendδ+δ−HCl2.23.2electronegativity of each atombond dipoleElectronegativity in the periodic tableLiBeBCNOFNaMgAlSiPSClKCaGaGeAsSeBrrises across a periodrises up a group: F is highest
  • Electronegativity: the ability of an atom to attract the bonding pair of electrons in a covalent bond. Pauling scale.
  • Rises across a period (more protons, same shielding, smaller atom) and falls down a group (bigger atom, more shielding).
  • Different electronegativities: the pair is shared unequally. A polar bond: δ+ and δ−.
  • H–Cl: H 2.2, Cl 3.2. δ− on Cl. C–H (2.6, 2.2) is treated as non-polar.
  • Bigger difference, more polar. Very large difference: ionic. Bonding is a continuum.
Quick check
?Electronegativity values: H 2.2, C 2.6, O 3.4, F 4.0, P 2.2. Which bond is the most polar?
Mission 3

Polar molecules

Do bond dipoles cancel?Dipoles cancel: non-polarCOOCO₂BFFFBF₃CClClClClCCl₄bond dipoles sum to zeroDipoles do not cancel: polarOHHH₂OCClHClHCH₂Cl₂green arrow = resultant dipolered arrows = bond dipolesC–H bonds: little polarity, not drawn
  • A molecule is polar if its bond dipoles leave a permanent dipole overall.
  • Equal dipoles arranged symmetrically cancel: CO2, BF3 and CCl4 are non-polar.
  • In H2O, NH3 and CH2Cl2 they don't cancel: polar.
  • Check both: are the bonds polar, and does the shape cancel them?
Quick check
?Water, H2O, is a polar molecule with a permanent dipole (electronegativity: H 2.2, O 3.4). Which statement explains this?
Mission 3

Forces between molecules

Forces between moleculesLondon forcesδ−δ+temporarydipoleδ−δ+induceddipoledipole–dipoleδ+δ−HClClHδ−δ+two HCl molecules
  • London forces (induced dipole–dipole) act between all molecules.
  • Electrons move: a temporary dipole forms and induces a dipole in a neighbour. They attract.
  • More electrons and more surface contact: stronger London forces.
  • Permanent dipole–dipole: δ+ of one polar molecule attracts δ− of another (two HCl molecules).
  • All are much weaker than covalent or ionic bonds.
Mission 3

Hydrogen bonding

Hydrogen bonding in waterOHHOHHOHHOHHOHHcovalent O–H, inside a moleculehydrogen bond, between moleculeslone pair on OIceopen latticeLiquid watercloser, denser
  • Hydrogen bond: an H atom bonded to N, O or F (δ+) attracts a lone pair on N, O or F of another molecule.
  • Drawn as a dotted line, O–H⋯O roughly straight.
  • The O–H bond inside water is covalent; the hydrogen bond is between molecules.
  • Water forms up to four per molecule. Ice: an open lattice, so ice is less dense than water.
  • Anomalously high boiling points: H2O, NH3 and HF boil far above the trend of their groups.
Quick check
?Liquid methanol, CH3OH, contains hydrogen bonds. What is a hydrogen bond in methanol?
Mission 3

Ranking the forces

Boiling points of molecules of similar massBoiling point / °C−200−150−100−50050100−183 °CO₂Mᵣ 32.0Londonforces only−60 °CH₂SMᵣ 34.1dipole–dipole65 °CCH₃OHMᵣ 32.0hydrogenbonding
  • At similar molar mass: London < permanent dipole–dipole < hydrogen bonding.
  • O2, H2S and CH3OH: Mᵣ 32.0, 34.1 and 32.0.
  • O2, London only: boils at −183 °C.
  • H2S, polar, adds dipole–dipole: −60 °C.
  • CH3OH adds hydrogen bonds: 65 °C.
  • Very different masses? London forces can win: octane, C8H18, non-polar but far heavier, boils at 126 °C.
  • Alkanes: longer chain, higher bp. Branched isomers: less contact, lower bp.
Quick check
?Propane, CH3CH2CH3 (Mᵣ 44.11), ethanal, CH3CHO (Mᵣ 44.06), and ethanol, CH3CH2OH (Mᵣ 46.08), have comparable molar masses. Which lists them in order of increasing boiling point?
Mission 3

Simple molecular substances

Simple molecular lattices: iodine and iceIodine: I₂ moleculescovalent I–I, inside a moleculeweak London forces,between moleculesIce: H₂O moleculesOHHOHHOHHOHHOHHcovalent O–H, inside a moleculehydrogen bond, between moleculeslone pair on Oeach H₂O: hydrogen-bonded to 4 others
  • Melting and boiling overcome forces between molecules. Covalent bonds stay intact.
  • Weak forces: low melting and boiling points. No ions or free electrons: no conduction.
  • Iodine: a lattice of I2 molecules held by London forces. It sublimes on gentle warming.
  • Ice: each H2O hydrogen bonded to four others in an open, tetrahedral lattice.
Mission 3

Solubility: like dissolves like

Dissolving: particle viewsNa⁺ in waterNa⁺OHHOHHOHHOHHO (δ−) toward the ionCl⁻ in waterCl⁻OHHOHHOHHOHHH (δ+) toward the ionEthanol in waterOHHOCH₃CH₂HOHHboth O–H⋯O links are hydrogen bondsIodine in hexaneLondon forces only
  • A solute dissolves if new solute–solvent attractions make up for those broken.
  • Ionic compounds in water: polar water molecules surround the ions (hydration).
  • Alcohols: the O–H hydrogen bonds to water. Short chains mix; longer chains dissolve less.
  • Polar molecules that can't hydrogen bond (halogenoalkanes) barely dissolve in water.
  • Non-polar solutes dissolve in non-polar solvents: I2 in hexane.
Quick check
?Ethanol, CH3CH2OH, mixes with water in all proportions, but hexane, C6H14, does not dissolve in water. Which statement explains this difference?
Mission 3

Separating by attractions: chromatography

Paper chromatogram2.4 cm8.0 cmpencil baselinesolvent frontspotBoth distances start at the baseline.
  • You'll meet chromatography in detail later; here is why it works.
  • A spot of mixture sits on a stationary phase (paper, or a TLC plate). A solvent, the mobile phase, moves up through it.
  • Each component is attracted to both phases. More attraction to the stationary phase: it moves less.
  • Rf = distance moved by spot ÷ distance moved by solvent, both from the baseline.
  • Spot 2.4 cm, solvent 8.0 cm: Rf = 0.30. Same conditions, same substance, same Rf.
Mission check

?Ammonia, NH3 (Mᵣ 17.0), boils at −33 °C. Phosphine, PH3 (Mᵣ 34.0), boils at −88 °C. Electronegativity: H 2.2, N 3.0, P 2.2. Why does the lighter molecule boil higher?
Recap

The big ideas

Mission 1

  • A covalent bond is the attraction of two nuclei for a shared pair; in a co-ordinate bond one atom supplies both electrons.
  • More shared pairs: shorter, stronger bond. N≡N is why nitrogen is so unreactive.

Mission 2

  • Count every pair (or domain) round the central atom, lone pairs included; they spread as far apart as possible.
  • The shape names only the atoms. Lone pairs repel most and close up the bond angles.

Mission 3

  • Unequal sharing gives polar bonds; a molecule is polar only if its shape stops the dipoles cancelling.
  • Similar mass: London < permanent dipole–dipole < hydrogen bonds. Boiling overcomes these, not covalent bonds.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Bonding for Eduqas A-level Chemistry. 🎉

  1. Mission 1Air is 78% nitrogen. Why does almost nothing react with it?
  2. Mission 2Water and carbon dioxide both have three atoms. Why is one bent and the other straight?
  3. Mission 3Water and methane molecules have almost the same mass. Why does water boil over 260 °C higher?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to A-Level Chemistry · Eduqas