← A-Level Chemistry · Edexcel · A-Level Chemistry revision
⭐ 0
Edexcel A-level Chemistry (9CH0) · Topic 15: Transition Metals (part 2)
Mini-Lesson

Transition Metals (part 2)

4 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1Why does only one of two platinum compounds with the same formula treat cancer?
  2. Mission 2Why can carbon monoxide stop blood carrying oxygen, even when there is plenty of oxygen to breathe?
  3. Mission 3How can a metal salt with no hydrogen in its formula give away hydrogen ions?
  4. Mission 4Why does extra alkali make some metal precipitates vanish but leave others untouched?
Mission 1

Mission 1: Why does only one of two platinum compounds with the same formula treat cancer?

Make a guess: Why does only one of two platinum compounds with the same formula treat cancer?

Mission 1

Shape from co-ordination number

Shapes of complex ionsLLLLMLLoctahedral90°LLLMLtetrahedral109.5°LLLLMsquare planar90°
  • The co-ordinate bonds around the metal ion repel each other and get as far apart as possible.
  • 6 bonds → octahedral, angles 90°.
  • 4 bonds → tetrahedral (109.5°) or square planar (90°).
  • So six-fold coordination gives an octahedron: six bonding pairs repel equally and get as far apart as possible.
Mission 1

Octahedral: small ligands

Octahedral complexesH2OH2OH2OH2OCuH2OH2O2+[Cu(H2O)6]2+NH3NH3H2OH2OCuNH3NH32+[Cu(NH3)4(H2O)2]2+
  • Small ligands such as H2O and NH3: six fit around the metal ion.
  • [Cu(H2O)6]²⁺, [Fe(H2O)6]³⁺, [Co(H2O)6]²⁺: octahedral, 90°.
  • OH⁻ also gives six-fold complexes: [Cr(OH)6]³⁻.
  • Draw it with wedges: two bonds up and down in the plane of the page, two wedges (towards you), two dashes (away).
Mission 1

Tetrahedral: larger ligands

Octahedral to tetrahedralOOOOOOClClClCl[Cu(H2O)6]2+blue[CuCl4]2−yellow+ 4Cl−− 6H2Oco-ordinationnumber 6co-ordinationnumber 4
  • Cl⁻ is larger than H2O or NH3: only four fit around the metal ion.
  • [CuCl4]²⁻ and [CoCl4]²⁻: tetrahedral, 109.5°.
Mission 1

Square planar

Square planar and linearClNH3NH3ClPt90°Pt(NH3)2Cl2
  • Some four-co-ordinate complexes are flat: square planar, all angles 90°.
  • Platinum(II) complexes are square planar, e.g. Pt(NH3)2Cl2.
Quick check
?Which complex ion has bond angles of 109.5°?
Mission 1

Cis–trans isomers

Cis and trans isomersClClNH3NH3PtClNH3ClNH3Ptcistrans90°180°Pt(NH3)2Cl2
  • Pt(NH3)2Cl2 exists as two compounds.
  • Cis: the two Cl on the same side, at 90°. Trans: opposite, at 180°.
  • Same formula, same bonds, different arrangement in space: stereoisomers.
  • A tetrahedral complex never does: every pair of positions is adjacent.
Quick check
?Platinum(II) complexes are square planar; zinc(II) complexes are tetrahedral. Which complex can exist as cis and trans isomers?
Mission 1

How cisplatin works

Cisplatin and DNAClClNH3NH3PtH2OH2ONH3NH3Pt2+NNNH3NH3Pt2+cisplatinCl− → H2OH2O → N of GDNA strandGGPtNNNH3NH3cis-Pt(NH3)2 bridges both Ntransplatin: sites 180° apartNNcloseNH3NH3Ptfar apart
  • Cisplatin is cis-Pt(NH3)2Cl2, an anti-cancer drug.
  • Inside a cell, its two Cl⁻ ligands are replaced, first by water.
  • Then platinum bonds to N atoms on two neighbouring guanine bases in DNA.
  • This kinks the DNA, so it can't be copied: DNA replication and cell division stop.
  • It also attacks healthy cells that divide quickly (e.g. hair loss); it can also damage the kidneys.
Mission 1

Why only the cis isomer

Cisplatin and DNAClClNH3NH3PtH2OH2ONH3NH3Pt2+NNNH3NH3Pt2+cisplatinCl− → H2OH2O → N of GDNA strandGGPtNNNH3NH3cis-Pt(NH3)2 bridges both Ntransplatin: sites 180° apartNNcloseNH3NH3Ptfar apart
  • In cisplatin the two leaving groups are at 90°: they can bond to two neighbouring guanines.
  • In transplatin they are at 180°: it can't make the same link, and it is far less effective.
  • So cisplatin is supplied as the pure cis isomer: trans would add side effects without the benefit.
Mission check

?A chemist makes two different compounds that both have the formula Pd(NH3)2Cl2, a four-co-ordinate palladium(II) complex. What can you deduce?
Mission 2

Mission 2: Why can carbon monoxide stop blood carrying oxygen, even when there is plenty of oxygen to breathe?

Make a guess: Why can carbon monoxide stop blood carrying oxygen, even when there is plenty of oxygen to breathe?

Mission 2

Swapping ligands

Copper(II) with ammonialittleNH3excessNH3[Cu(H2O)6]2+blueCu(OH)2(H2O)4pale bluedeep bluesolution[Cu(NH3)4(H2O)2]2+H2OH2OH3NNH3H3NNH32+4 NH3 in a plane · 2 H2O axial
  • In ligand substitution, one ligand replaces another around the metal ion.
  • NH3 and H2O are similar in size and both uncharged: they swap with no change in co-ordination number.
  • [Cu(H2O)6]²⁺ + 4NH3 → [Cu(NH3)4(H2O)2]²⁺ + 4H2O · blue → deep blue.
  • Add ammonia drop by drop: a pale blue precipitate forms first, then dissolves in excess.
  • The precipitate is Cu(OH)2(H2O)4.
Mission 2

More nitrogen ligands

  • Amines have an N lone pair too. Butylamine, CH3CH2CH2CH2NH2, behaves like ammonia: pale blue precipitate, then deep blue [Cu(CH3CH2CH2CH2NH2)4(H2O)2]²⁺ in excess.
Mission 2

Chloride changes the number

Size and number[Cu(H2O)6]2+CN = 6Cl⁻Cl⁻Cl⁻Cl⁻[CuCl4]2−CN = 4conc HCladd waterH2OCl− biggerbluegreenyellow
  • Cl⁻ is larger than H2O, and charged: only four fit around the metal ion.
  • [Cu(H2O)6]²⁺ + 4Cl⁻ ⇌ [CuCl4]²⁻ + 6H2O · blue → yellow (green part-way).
  • [Co(H2O)6]²⁺ + 4Cl⁻ ⇌ [CoCl4]²⁻ + 6H2O · pink → blue.
  • Co-ordination number 6 → 4; octahedral → tetrahedral.
  • Concentrated HCl supplies the Cl⁻. Add water and the colour change reverses.
Quick check
?Why does the co-ordination number of copper(II) change when Cl⁻ replaces H2O, but not when NH3 replaces H2O?
Mission 2

Ligands with more than one grip

Ligand gripH2NNH2CH2CH2en · 2 donorsOOOONNEDTA4− · 6 donors2 N + 4 O
  • Bidentate: two donor atoms, two co-ordinate bonds. en, H2NCH2CH2NH2 (two N).
  • Multidentate: EDTA⁴⁻ has six donor atoms (2 N, 4 O).
  • Co-ordination number counts bonds: [Ni(en)3]²⁺ is 6; [Cu(EDTA)]²⁻ is 6.
  • To identify one, look for two or more atoms with lone pairs, placed so both can reach the metal.
Quick check
?EDTA⁴⁻ bonds to a metal ion through two N atoms and four O atoms. What are the oxidation state and the co-ordination number of iron in [Fe(EDTA)]⁻?
Mission 2

The chelate effect

Particle count[Cu(H2O)6]2+[Cu(EDTA)]2−6 H2OEDTA4−1 + 1 = 21 + 6 = 72 → 7 particles: ΔS > 0
  • Bidentate and multidentate ligands readily replace monodentate ones: the chelate effect.
  • [Cu(H2O)6]²⁺ + EDTA⁴⁻ → [Cu(EDTA)]²⁻ + 6H2O · 2 particles → 7.
  • More particles, more disorder: ΔS(system) is large and positive.
  • The chelated complex is more stable: reversing it would mean a large fall in entropy.
Quick check
?[Ni(NH3)6]²⁺ + 3en → [Ni(en)3]²⁺ + 6NH3. Six Ni–N bonds are broken and six Ni–N bonds are made, so ΔH is small. Why does the reaction happen?
Mission 2

Haemoglobin carries oxygen

Haem siteproteinNNNNNFe2+haemO2weak,reversible
  • Haemoglobin contains haem: an iron(II) complex with a multidentate ligand (four N atoms around Fe²⁺).
  • A fifth bond holds the Fe²⁺ to the protein.
  • At the sixth site, O2 forms a co-ordinate bond to Fe²⁺.
  • In the lungs O2 binds; in the tissues, where O2 is low, it is released. The bond is weak and reversible.
  • You won't be asked for the structure of haem.
Mission 2

Carbon monoxide takes the seat

Haem siteproteinNNNNNFe2+haemCOO2≈ 200×stronger
  • CO bonds to the same site on Fe²⁺, about 200 times more strongly than O2.
  • It is a ligand substitution: CO replaces O2.
  • HbO2 + CO ⇌ HbCO + O2 has K ≈ 200: even air with just 0.1% CO can tie up about half the haem.
  • A haem with CO bonded can't carry O2.
  • Tissues are starved of oxygen: CO is toxic.
Quick check
?People with carbon monoxide poisoning are given pure oxygen to breathe, sometimes at high pressure. Why does this help?
Mission 2

Core practical 12: making a complex

  • Dissolve the metal salt in the minimum of water.
  • Add the ligand in excess, so the substitution goes as far as possible.
  • Crystallise: cool in ice, or add a liquid in which the complex is less soluble.
  • Filter under reduced pressure, wash with a little cold solvent, dry.
  • Weigh and calculate the percentage yield from the limiting reagent.
Mission check

?A few drops of dilute potassium thiocyanate, KSCN, are added to a pale solution of Fe³⁺(aq). It turns deep red as [Fe(SCN)(H2O)5]²⁺ forms, even though water molecules outnumber thiocyanate ions by thousands to one. What does this show?
Mission 3

Mission 3: How can a metal salt with no hydrogen in its formula give away hydrogen ions?

Make a guess: How can a metal salt with no hydrogen in its formula give away hydrogen ions?

Mission 3

Metal-aqua ions

Octahedral aqua ionH2OH2OH2OOH2H2OOH2Mn+90°each O gives M a lone pair
  • Dissolve a metal salt in water: each metal ion is surrounded by six water ligands.
  • Each H2O donates a lone pair from O to the metal ion: a dative (coordinate) bond.
  • Formula: [M(H2O)6]ⁿ⁺, an octahedral metal-aqua ion.
  • The ion keeps the metal's charge: water ligands are neutral.
Mission 3

Colours of aqua ions

Colour stripCu2+(aq)blueFe2+(aq)pale greenFe3+(aq)yellow-brownCr3+(aq)violet | greenCo2+(aq)pinkFe3+: the ion itself is pale violetCr3+: green in the lab (other ligands)
  • [Cu(H2O)6]²⁺: blue.
  • [Fe(H2O)6]²⁺: pale green.
  • [Fe(H2O)6]³⁺: pale violet, but its solutions usually look yellow-brown.
  • [Cr(H2O)6]³⁺: violet; chromium(III) solutions in the lab often look green, because other ligands (e.g. sulfate, chloride) replace some water.
  • [Co(H2O)6]²⁺: pink.
Quick check
?Which list gives the usual colours of solutions of Fe²⁺(aq), Fe³⁺(aq) and Cu²⁺(aq), in that order?
Mission 3

Pulled water ligands

Polarised O-HOHHM3+δ+δ+electron density pulled towards OOHHM3+OH−takes H+an OH− ligand is left on M
  • The positive metal ion attracts the O lone pair strongly.
  • Electron density is drawn from the O–H bonds towards O and the metal.
  • So the O–H bonds become more polar and weaker.
  • A water ligand can now lose an H⁺, leaving an OH⁻ ligand on the metal.
  • The "hydrogen ions" in the opening question come from the water ligands, not the salt's formula.
Mission 3

Bases pull H⁺ off: a neutral precipitate

Stepwise deprotonation[Cu(H2O)6]2+2+[Cu(H2O)5(OH)]+1+[Cu(H2O)4(OH)2]0charge− H+OH− takes H+,forms H2O− H+OH− takes H+,forms H2Oprecipitate
  • Add a few drops of OH⁻(aq): it removes H⁺ from water ligands (H⁺ + OH⁻ → H2O).
  • Remove as many H⁺ as the ion's charge: the complex becomes neutral.
  • A neutral complex is insoluble: it appears as a precipitate.
  • [Cu(H2O)6]²⁺(aq) + 2OH⁻(aq) → [Cu(H2O)4(OH)2](s) + 2H2O(l)
  • Blue solution → pale blue precipitate.
Mission 3

Worked example: iron(III) with hydroxide

  • Start: [Fe(H2O)6]³⁺. Charge 3+, so remove 3 H⁺.
  • Product: [Fe(H2O)3(OH)3]. Check: 6 ligands; charge 3+ − 3 = 0.
  • Each removed H⁺ meets an OH⁻: 3H2O formed.
  • [Fe(H2O)6]³⁺(aq) + 3OH⁻(aq) → [Fe(H2O)3(OH)3](s) + 3H2O(l)
  • Observation: yellow-brown solution → orange-brown precipitate.
  • Give the complex formulae, as above.
Quick check
?A few drops of NaOH(aq) are added to a solution of [Fe(H2O)6]²⁺. Which species is the precipitate?
Mission check

?Gallium is below aluminium in Group 13 and forms the aqua ion [Ga(H2O)6]³⁺. A few drops of NaOH(aq) are added, and a white precipitate forms. Which species is the precipitate?
Mission 4

Mission 4: Why does extra alkali make some metal precipitates vanish but leave others untouched?

Make a guess: Why does extra alkali make some metal precipitates vanish but leave others untouched?

Mission 4

A little base: the same first step

  • NaOH(aq) supplies OH⁻, which removes H⁺ from water ligands (see Mission 3).
  • A few drops: the neutral hydroxide precipitates.
  • NH3(aq) is a weak base: NH3 + H2O ⇌ NH4⁺ + OH⁻.
  • So a little NH3 gives the same precipitate as a little NaOH.
  • [Cu(H2O)6]²⁺(aq) + 2NH3(aq) → [Cu(H2O)4(OH)2](s) + 2NH4⁺(aq)
  • The interesting part comes next: add the reagent in excess.
Mission 4

Precipitate colours

Precipitate coloursa few drops of NaOH(aq)Cu2+(aq)pale blueFe2+(aq)greenbrown top layerFe3+(aq)orange-brownCr3+(aq)grey-greenCo2+(aq)blue
  • Cu²⁺: blue solution → pale blue precipitate.
  • Fe²⁺: pale green → green precipitate; turns brown at the surface on standing (air oxidises Fe(II) to Fe(III)).
  • Fe³⁺: yellow-brown → orange-brown precipitate.
  • Cr³⁺: green (or violet) → grey-green precipitate.
  • Co²⁺: pink → blue precipitate; turns pink, then brown in air, on standing.
Quick check
?A few drops of NaOH(aq) are added to a pale green solution. A green precipitate forms, and its surface turns brown on standing in air. Which ion was in the solution?
Mission 4

Excess NaOH: amphoteric hydroxides

Amphoteric hydroxideamphoteric hydroxide[Cr(H2O)3(OH)3](s)grey-green precipitate+ H+acid–base+ OH−acid–base[Cr(H2O)6]3+solution[Cr(OH)6]3−dark greensolution
  • An amphoteric hydroxide dissolves in both acids and bases.
  • Cr: [Cr(H2O)3(OH)3](s) + 3OH⁻(aq) → [Cr(OH)6]³⁻(aq) + 3H2O(l). Grey-green precipitate → dark green solution.
  • Cu, Fe(II) and Fe(III) hydroxides: no change in excess NaOH.
  • Co(II) hydroxide: no change.
Mission 4

Excess ammonia: ligand exchange

Copper(II) with ammoniafew dropsNH3excessNH3[Cu(H2O)6]2+bluepale blueprecipitatedeep bluesolution[Cu(NH3)4(H2O)2]2+H2OH2OH3NNH3H3NNH32+octahedral · 2 H2O trans (axial)
  • NH3 is a ligand as well as a base. In excess it replaces H2O and OH⁻ ligands, giving a soluble complex.
  • Cu: [Cu(H2O)4(OH)2](s) + 4NH3(aq) → [Cu(NH3)4(H2O)2]²⁺(aq) + 2H2O(l) + 2OH⁻(aq). Pale blue precipitate → deep blue solution.
  • Cr: [Cr(H2O)3(OH)3](s) + 6NH3(aq) → [Cr(NH3)6]³⁺(aq) + 3H2O(l) + 3OH⁻(aq). → purple solution.
  • Co: → pale straw (yellow-brown) solution of [Co(NH3)6]²⁺; darkens in air as Co(II) is oxidised to Co(III).
  • Fe hydroxides: no change.
Mission 4

Amphoteric or ligand exchange?

Amphoteric hydroxideamphoteric hydroxide[Cr(H2O)3(OH)3](s)grey-green precipitate+ H+acid–base+ OH−acid–base[Cr(H2O)6]3+solution[Cr(OH)6]3−dark greensolution+ NH3(excess)[Cr(NH3)6]3+purple solutionligand exchange
  • Amphoteric (acid–base): the hydroxide loses H⁺ to OH⁻ or gains H⁺ from acid. Only H2O/OH⁻ ligands, before and after.
  • [Cr(H2O)3(OH)3] + 3OH⁻ → [Cr(OH)6]³⁻ + 3H2O
  • [Cr(H2O)3(OH)3] + 3H⁺ → [Cr(H2O)6]³⁺
  • Ligand exchange: a new ligand replaces H2O/OH⁻.
  • [Cr(H2O)3(OH)3] + 6NH3 → [Cr(NH3)6]³⁺ + 3H2O + 3OH⁻
  • Quick test: does a new kind of ligand appear in the product? Yes → ligand exchange.
  • Cu(OH)2 dissolves in excess NH3 by ligand exchange only: it is not amphoteric (no change in excess NaOH).
Quick check
?Which precipitate dissolves in both excess NaOH(aq) and excess NH3(aq)?
Mission 4

Running the tests

Running the testsunknown solutionCu2+ Fe2+ Fe3+ Cr3+Co2++ NaOH(aq), dropwisenote the precipitate colour+ excess NaOH(aq), shakedoes it dissolve?fresh sample + NH3(aq)dropwise, then excess: dissolves?leave to standcolour change in air?
  • Wear eye protection: NaOH(aq) is corrosive.
  • A few cm³ of the unknown solution in a test tube. Add NaOH(aq) dropwise: note the precipitate colour.
  • Keep adding until in excess, shaking: does the precipitate dissolve?
  • Repeat with NH3(aq) on a fresh sample, dropwise then in excess.
  • Leave the precipitates to stand: some change colour in air (oxidation).
Mission check

?Zinc ions are not in your table of tests. A few drops of NaOH(aq) added to Zn²⁺(aq) give a white precipitate. With excess NaOH(aq), the precipitate dissolves to give a colourless solution. Which equation shows what the excess NaOH(aq) does?
Recap

The big ideas

Mission 1

  • 6 bonds: octahedral (90°). 4 bonds: tetrahedral (109.5°) with large ligands like Cl⁻, or square planar (90°) for Pt(II).
  • Cis–trans: same formula, ligands at 90° or 180°. Only cisplatin binds two neighbouring guanines.

Mission 2

  • Ligand substitution: NH3 ↔ H2O keeps the co-ordination number; Cl⁻ (larger, charged) changes it from 6 to 4. CO replaces O2 at the Fe²⁺ of haem because it bonds about 200 times more strongly.
  • Chelate effect: multidentate ligands replace monodentate ones because the number of particles, and so ΔS, increases.

Mission 3

  • [M(H2O)6]ⁿ⁺: the metal ion polarises its water ligands, so they can lose H⁺.
  • OH⁻ removes as many H⁺ as the charge: the neutral complex precipitates.

Mission 4

  • A little OH⁻ (or NH3): neutral hydroxide precipitate. Its colour identifies the ion.
  • Excess NaOH dissolves amphoteric hydroxides; excess NH3 dissolves some by ligand exchange.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Transition Metals (part 2) for Edexcel A-level Chemistry. 🎉

  1. Mission 1Why does only one of two platinum compounds with the same formula treat cancer?
  2. Mission 2Why can carbon monoxide stop blood carrying oxygen, even when there is plenty of oxygen to breathe?
  3. Mission 3How can a metal salt with no hydrogen in its formula give away hydrogen ions?
  4. Mission 4Why does extra alkali make some metal precipitates vanish but leave others untouched?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to A-Level Chemistry · Edexcel