← A-Level Chemistry · CCEA · A-Level Chemistry revision
⭐ 0
CCEA GCE Chemistry · Unit AS 2 / 2.1 Formulae and amounts of a substance
Mini-Lesson

Formulae and amounts of a substance

4 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1Mix 10 g of hydrogen with 10 g of oxygen. Which runs out first?
  2. Mission 2Methanal, ethanoic acid and glucose all boil down to CH2O. How can three different substances share one formula?
  3. Mission 3An identical balloon of hydrogen and one of carbon dioxide: which holds more molecules?
  4. Mission 4Can a reaction with a 100% yield still turn most of its reactants into waste?
Mission 1

Mission 1: Mix 10 g of hydrogen with 10 g of oxygen. Which runs out first?

Make a guess: Mix 10 g of hydrogen with 10 g of oxygen. Which runs out first?

Mission 1

Limiting and excess

Limiting reactant: 6 CO and 4 O₂ give 6 CO₂ with 1 O₂ left over2CO + O₂ → 2CO₂BeforeAfterO₂ left over6 CO + 4 O₂6 CO₂ + 1 O₂6 CO use 3 O₂, so CO limitsCO
  • The limiting reactant is used up first, and the reaction stops.
  • So it fixes the maximum amount of product.
  • The other reactant is in excess: some is left over.
  • 2CO + O2 → 2CO2, starting with 6 CO and 4 O2: 6 CO2 form, and 1 O2 is left over.
Mission 1

Finding the limiting reactant

  • Convert every reactant to moles. Masses alone tell you nothing.
  • Divide each amount by its coefficient in the equation. The smallest result is the limiting reactant.
  • Calculate all products from the limiting reactant only.
  • Excess left over = amount present − amount that reacted.
Mission 1

Worked example: burning methane

  • CH4(g) + 2O2(g) → CO2(g) + 2H2O(l), with 8.00 g of CH4 and 24.0 g of O2.
  • n(CH4) = 8.00 ÷ 16.0 = 0.500 mol; ÷ 1 = 0.500.
  • n(O2) = 24.0 ÷ 32.0 = 0.750 mol; ÷ 2 = 0.375. Smaller, so O2 limits.
  • n(CO2) = 0.750 ÷ 2 = 0.375 mol; mass = 0.375 × 44.0 = 16.5 g at most.
  • CH4 left = 0.500 − 0.375 = 0.125 mol = 2.00 g.
  • The smaller mass (methane) was the one in excess.
Quick check
?Nitrogen and hydrogen react: N2(g) + 3H2(g) → 2NH3(g). A mixture contains 5.60 g of N2 and 1.50 g of H2. Which statement is correct? (Aᵣ: H 1.0, N 14.0)
Mission 1

Theoretical and experimental yield

  • Theoretical yield: the maximum mass of product, calculated from the limiting reactant.
  • Experimental (actual) yield: the mass of product actually obtained. It is normally less.
  • Percentage yield = experimental yield ÷ theoretical yield × 100.
  • Why less: incomplete or reversible reaction, side reactions, product lost in transfer and purification.
  • Above 100%? The product is impure, for example still wet.
Quick check
?Which statement describes the theoretical yield of a product in a reaction?
Mission 1

Worked example: percentage yield

Percentage yield flow4.00 g CuO40.0 cm³ of1.00 mol dm⁻³ H₂SO₄÷ 79.5c × V0.0503 molCuO0.0400 molH₂SO₄÷ coefficients0.0503 ÷ 1 vs 0.0400 ÷ 1smaller: H₂SO₄ is limiting× 249.6 g mol⁻¹theoretical yield0.0400 × 249.6 = 9.984 g7.50 g collectedpercentage yield7.50 ÷ 9.984 × 100 = 75.1%
  • CuO(s) + H2SO4(aq) → CuSO4(aq) + H2O(l); crystallising gives CuSO4·5H2O.
  • 4.00 g CuO: n = 4.00 ÷ 79.5 = 0.0503 mol. 40.0 cm³ of 1.00 mol dm⁻³ acid: n = 0.0400 mol.
  • Ratio 1 : 1, so H2SO4 limits. The excess CuO is filtered off.
  • Theoretical yield: 0.0400 mol × 249.6 g mol⁻¹ = 9.98 g of CuSO4·5H2O.
  • 7.50 g collected: percentage yield = 7.50 ÷ 9.984 × 100 = 75.1%.
Mission 1

Working backwards from a yield

  • To make a target mass at a known yield, find the theoretical mass needed first.
  • Theoretical mass = target ÷ (percentage yield ÷ 100). It is always larger than the target.
  • CaCO3 → CaO + CO2 at 80.0% yield. To make 5.00 g of CaO: theoretical = 5.00 ÷ 0.800 = 6.25 g.
  • n(CaO) = 6.25 ÷ 56.1 = 0.1114 mol = n(CaCO3). Mass = 0.1114 × 100.1 = 11.2 g of CaCO3.
Calculate
?Copper(II) oxide is reduced by hydrogen: CuO(s) + H2(g) → Cu(s) + H2O(g). With hydrogen in excess, 3.98 g of CuO gives 2.85 g of copper. Calculate the percentage yield. (Aᵣ: O 16.0, Cu 63.5)
Mission check

?Thermite is a mixture of aluminium and iron(III) oxide. 2Al(s) + Fe2O3(s) → Al2O3(s) + 2Fe(l). A mixture of 10.0 g of Al and 10.0 g of Fe2O3 reacts, and 5.60 g of iron is collected. What is the percentage yield of iron? (Molar masses: Al 27.0, Fe2O3 159.6, Fe 55.8 g mol⁻¹)
Mission 2

Mission 2: Methanal, ethanoic acid and glucose all boil down to CH2O. How can three different substances share one formula?

Make a guess: Methanal, ethanoic acid and glucose all boil down to CH2O. How can three different substances share one formula?

Mission 2

Empirical and molecular formulae

Molecular and empirical formulaeMolecularEmpiricalC2H4÷ 2CH2H2O2÷ 2HOCH2Omethanal÷ 1CH2OC2H4O2ethanoic acid÷ 2CH2OOOHOHOHOHCH2OHC6H12O6glucose÷ 6CH2O
  • Empirical formula: the simplest whole-number ratio of atoms of each element in a compound.
  • Molecular formula: the actual number of atoms of each element in one molecule.
  • Molecular formula = (empirical formula)x, x a whole number. C2H4 → CH2; H2O2 → HO.
  • Neither shows which atoms are bonded to which.
Mission 2

Percentage by mass

  • % by mass of an element = (number of its atoms × Ar) ÷ Mr × 100.
  • NH4NO3: Mr = 2(14.0) + 4(1.0) + 3(16.0) = 80.0. % N = 28.0 ÷ 80.0 × 100 = 35.0%.
Quick check
?A compound contains 40.0% carbon, 6.7% hydrogen and 53.3% oxygen by mass.
Its Mr is 60.0. What is its empirical formula?
Mission 2

From percentages to empirical formula

Empirical formula working table%(g in 100 g)÷ Ar÷ smallest× 2P43.71.411.002O56.33.522.505P : O = 2 : 5Empirical formula: P2O5Ar: P 31.0, O 16.0
  • Take a 100 g sample: percentages become grams. Divide each by its Ar.
  • Divide every result by the smallest.
  • Scale to whole numbers: × 2 for .50; × 3 for .33 or .67; × 4 for .25 or .75. Never round 1.50.
  • Example: 43.7% P, 56.3% O.
  • P: 43.7 ÷ 31.0 = 1.41. O: 56.3 ÷ 16.0 = 3.52. Ratio 1 : 2.50.
  • × 2 = 2 : 5. Empirical formula P2O5.
Quick check
?A compound of aluminium and sulfur contains 35.93% aluminium and 64.07% sulfur by mass. What is its empirical formula?
  • Data: Ar Al 27.0, S 32.1.
Mission 2

From empirical to molecular formula

  • You also need the Mr of the compound, from another measurement.
  • x = Mr ÷ empirical formula mass.
  • P2O5: 2(31.0) + 5(16.0) = 142.0. Mr = 284.0, so x = 2: P4O10.
  • The hook: methanal CH2O (x = 1), ethanoic acid C2H4O2 (x = 2), glucose C6H12O6 (x = 6). Same ratio, different molecules.
Quick check
?A hydrocarbon contains 88.80% carbon and 11.20% hydrogen by mass. Its Mr is 54.0. What is its molecular formula? (Ar: H 1.0, C 12.0)
Mission 2

Water of crystallisation

Heating to constant massExamplecruciblepipeclay triangletripodBunsen burnerWeighingMass / gbefore heating2.46after 1st heating1.31after 2nd heating1.20after 3rd heating1.20constant
  • Hydrated salt: crystals contain water of crystallisation, e.g. MgSO4·7H2O. Anhydrous: no water.
  • Heat a weighed sample in a crucible, cool, reweigh. Repeat until the mass stops changing: heat to constant mass.
  • Example: 2.46 g hydrated MgSO4 → 1.20 g anhydrous. Water lost = 1.26 g.
  • n(MgSO4) = 1.20 ÷ 120.4 = 0.00997 mol. n(H2O) = 1.26 ÷ 18.0 = 0.0700 mol.
  • Ratio 1 : 7.02, so x = 7: MgSO4·7H2O.
  • Not heated to constant mass → water left behind → x too low.
Calculate
?Washing soda is hydrated sodium carbonate, Na2CO3·xH2O. It contains 62.9% water by mass. Find x. (Ar: H 1.0, C 12.0, O 16.0, Na 23.0)
Mission check

?Ethyne, a welding gas, and benzene, a liquid, both contain 92.3% carbon and 7.7% hydrogen by mass. What is the molecular formula of benzene?
  • Data: Ar H 1.0, C 12.0. Mr of benzene = 78.0.
Mission 3

Mission 3: An identical balloon of hydrogen and one of carbon dioxide: which holds more molecules?

Make a guess: An identical balloon of hydrogen and one of carbon dioxide: which holds more molecules?

Mission 3

Avogadro's law

Avogadro's lawsame T, same p, same volumeH₂8 moleculesCO₂8 moleculessame number of molecules
  • Avogadro's law: equal volumes of gases at the same T and p contain equal numbers of molecules.
  • Why: gas particles are tiny compared with the gaps. Their size doesn't change how many fit.
  • It counts molecules (or atoms, for noble gases), not atoms in molecules.
  • Equal volumes → equal amounts, so masses are in the ratio of molar masses.
Mission 3

Reacting gas volumes

Reacting volumes40 cm³ CO20 cm³ O₂40 cm³ CO₂+→+→4 CO + 2 O₂ → 4 CO₂4 C, 8 O on each sidevolume: 60 cm³ → 40 cm³
  • Same T and p: gas volume ∝ amount in moles.
  • So gases react in the volume ratio of their coefficients.
  • 2CO(g) + O2(g) → 2CO2(g).
  • 40 cm³ CO reacts with 20 cm³ O2 to make 40 cm³ CO2. Total: 60 cm³ in → 40 cm³ out.
  • Only gases count. A liquid or solid has almost no volume.
Quick check
?Sulfur dioxide reacts with oxygen: 2SO2(g) + O2(g) → 2SO3(g). What volume of oxygen reacts completely with 30.0 cm³ of sulfur dioxide? All volumes are measured at the same temperature and pressure.
Mission 3

Molar gas volume

  • Molar gas volume, Vm: the volume occupied by one mole of any gas, at a stated T and p. Units: dm³ mol⁻¹.
  • Room temperature and pressure (RTP): Vm = 24.0 dm³ mol⁻¹ (given).
  • CCEA Data Leaflet: 24 dm³ at 293 K and 1 atmosphere.
  • n = V ÷ 24.0, with V in dm³. For cm³: n = V ÷ 24 000.
  • Gases only, and only at the stated conditions.
Mission 3

Worked example: mass to gas volume

  • CaCO3(s) + 2HCl(aq) → CaCl2(aq) + H2O(l) + CO2(g). 0.500 g of CaCO3 reacts with excess acid. What volume of CO2 forms?
  • n(CaCO3) = 0.500 ÷ 100.1 = 4.995 × 10⁻³ mol.
  • Ratio CaCO3 : CO2 = 1 : 1, so n(CO2) = 4.995 × 10⁻³ mol.
  • V = 4.995 × 10⁻³ × 24 000 = 120 cm³ at RTP.
Quick check
?Magnesium reacts with excess dilute hydrochloric acid: Mg(s) + 2HCl(aq) → MgCl2(aq) + H2(g). What volume of hydrogen, in cm³ at RTP, forms from 0.120 g of magnesium? (Ar: Mg 24.3; molar gas volume 24.0 dm³ mol⁻¹ at RTP)
Mission check

?Two identical flasks at the same temperature and pressure are filled, one with neon, Ne, and one with sulfur hexafluoride, SF6, a dense gas used in electrical switchgear. The SF6 flask holds 7.2 times the mass of gas. Which statement is correct? (Ar: F 19.0, Ne 20.2, S 32.1)
Mission 4

Mission 4: Can a reaction with a 100% yield still turn most of its reactants into waste?

Make a guess: Can a reaction with a 100% yield still turn most of its reactants into waste?

Mission 4

Atom economy

  • Atom economy: the percentage of the reactants' total mass that ends up in the desired product.
  • Atom economy = M of desired product ÷ sum of M of all reactants × 100%.
  • Mass is conserved, so the reactant total equals the product total: either gives the same answer.
  • Multiply each M by its coefficient in the balanced equation.
  • It is fixed by the equation. The masses used and the yield do not change it.
Mission 4

Worked example: limestone to lime

Atom economy bar for CaCO₃ giving CaO and CO₂CaCO₃ → CaO + CO₂Reactant: 100.1 g of CaCO₃56.0%44.0%CaO: 56.1 gdesired productCO₂: 44.0 gby-productAtom economy = 56.1 ÷ 100.1 × 100 = 56.0%even at 100% yield, 44.0% of the mass is CO₂
  • CaCO3(s) → CaO(s) + CO2(g). Desired product: CaO (lime).
  • M: CaCO3 100.1; CaO 56.1; CO2 44.0.
  • Atom economy = 56.1 ÷ 100.1 × 100 = 56.0%.
  • So 44% of the mass leaves as CO2, even at 100% yield.
  • An addition reaction with a single product has 100% atom economy.
Quick check
?Which statement about atom economy and waste in an industrial process is correct?
Calculate
?In an older industrial process, titanium was made by reducing titanium(IV) chloride with sodium: TiCl4 + 4Na → Ti + 4NaCl. Calculate the atom economy for producing titanium, as a percentage. (Aᵣ: Na 23.0, Cl 35.5, Ti 47.9)
Quick check
?Which reaction has an atom economy of 100% for the product named?
Mission check

?Hydrogen is manufactured by reacting methane with steam: CH4(g) + H2O(g) → CO(g) + 3H2(g). In one batch, 16.0 kg of methane gave 4.80 kg of hydrogen. What is the atom economy for producing hydrogen by this reaction? (Aᵣ: H 1.0, C 12.0, O 16.0)
Recap

The big ideas

Mission 1

  • Moles ÷ coefficient: the smallest is the limiting reactant. It fixes the theoretical yield.
  • Excess left = amount present − amount reacted.
  • Percentage yield = experimental ÷ theoretical × 100.

Mission 2

  • Empirical formula: % → ÷ Ar → ÷ smallest → whole numbers. Molecular formula = (empirical)x, x = Mr ÷ empirical formula mass.
  • Hydrates: heat to constant mass; moles of water ÷ moles of anhydrous salt = x.

Mission 3

  • Same T and p: equal gas volumes hold equal numbers of molecules, so gases react in the volume ratio of their coefficients.
  • n = V ÷ 24.0 (dm³) at RTP.

Mission 4

  • Atom economy = M(desired product) ÷ total M of reactants (= total M of products) × 100, using coefficients.
  • It is set by the equation: a 100% yield can still waste most of the mass as by-product.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Formulae and amounts of a substance for CCEA A-level Chemistry. 🎉

  1. Mission 1Mix 10 g of hydrogen with 10 g of oxygen. Which runs out first?
  2. Mission 2Methanal, ethanoic acid and glucose all boil down to CH2O. How can three different substances share one formula?
  3. Mission 3An identical balloon of hydrogen and one of carbon dioxide: which holds more molecules?
  4. Mission 4Can a reaction with a 100% yield still turn most of its reactants into waste?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to A-Level Chemistry · CCEA