← A-Level Chemistry · CCEA · A-Level Chemistry revision
⭐ 0
CCEA GCE Chemistry · Unit AS 1 / 1.5 Structure
Mini-Lesson

Structure

2 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1Diamond and graphite are both pure carbon. Why does only graphite conduct electricity?
  2. Mission 2Tin conducts electricity. So why doesn't liquid tin(IV) chloride conduct at all?
Mission 1

Mission 1: Diamond and graphite are both pure carbon. Why does only graphite conduct electricity?

Make a guess: Diamond and graphite are both pure carbon. Why does only graphite conduct electricity?

Mission 1

Diamond: a giant covalent lattice

Diamond: a tetrahedral giant covalent latticeC109.5°five-atom unitin the latticeEach C: four equal bondsall four outer electrons in bonds
  • Covalent bonds run through the whole solid. There are no separate molecules.
  • Name: giant covalent lattice.
  • Diamond: each C bonded to four others, tetrahedrally (109.5°), in 3D.
  • Very hard, very high melting point: melting breaks strong covalent bonds.
  • No conduction: all four outer electrons of each C are in localised bonds.
Mission 1

Graphite

Graphite: layers and delocalised electronsconducts along the layerlayer gapweak forcesonlyEach C: three bonds at 120°no bonds between layersOne layer, edge-ondelocalisedelectrons aboveand below
  • Flat layers of hexagons. Each C bonded to three others (120°).
  • Each C's fourth outer electron is delocalised across its layer.
  • Delocalised electrons move when a voltage is applied: graphite conducts.
  • Weak forces between the layers. Layers slide, so graphite is soft.
  • Still a very high melting point: strong covalent bonds within layers must break.
Quick check
Two structural diagrams. Left, labelled Diamond: a central C atom joined by solid lines to four C atoms around it, each DiamondGraphite= covalent bond= attraction between layers= C atom
?The diagram represents parts of the structures of diamond and graphite, two forms of carbon. Which statement best explains why graphite is soft and diamond is hard?
Mission 1

Graphene and fullerenes

Graphene and C60Graphene: one layereach C bonded to three othersFullerene C₆₀: separate moleculesweakforcesC₆₀ cageC₆₀ cage60 C atoms: 12 pentagons, 20 hexagonsseparate molecules, weak forces between them
  • Background from the video: graphene and fullerenes are not examined on your course.
  • Graphene: a single layer of graphite, one atom thick.
  • Each C bonded to three others, with delocalised electrons: it conducts.
  • Very strong for its mass: strong covalent bonds run across the whole sheet.
  • Fullerenes, e.g. C60: closed cages of carbon atoms. These are separate molecules.
  • Only weak forces act between C60 molecules: far lower sublimation temperature than diamond.
  • Diamond, graphite, graphene and fullerenes are allotropes: one element, different structures.
Mission 1

Silicon and silicon dioxide

Silicon and silicon dioxideSilicon: diamond-type networkSieach Si bonded to four SiSilicon dioxide: SiO₂SiSiSiO bridging two SiO bonded to a further Si (not drawn)Si : O = 1 : 2
  • Background from the video: silicon and SiO2 are not examined on your course.
  • Silicon: the diamond structure. Each Si bonded to four Si, tetrahedrally.
  • Si–Si bonds are longer and weaker than C–C: silicon is less hard than diamond and melts lower (1414 °C).
  • Silicon conducts only slightly: it is a semiconductor, not a metal.
  • Silicon dioxide, SiO2: each Si bonded to four O; each O bonded to two Si.
  • SiO2 is a giant lattice, so its formula is just the ratio Si : O = 1 : 2.
  • Melts near 1700 °C. Hard, insoluble, non-conducting.
Mission 1

Predicting properties from structure

Giant covalent (e.g. diamond, SiO2)Simple molecular (e.g. CO2, I2)
Melting pointvery high: covalent bonds breaklow: only weak forces between molecules
Conductivitynone (except graphite, graphene; Si slightly)none
Solubilityinsoluble in any solventdepends on the solvent
  • Decide the structure first. Then explain each property from it.
Quick check
?Substance X melts at 1710 °C. It does not conduct electricity, either as a solid or when molten. It does not dissolve in water or in hexane. Which structure does X have?
Mission check

?Graphite conducts electricity far better along its layers than at right angles to them. Which statement explains this?
Mission 2

Mission 2: Tin conducts electricity. So why doesn't liquid tin(IV) chloride conduct at all?

Make a guess: Tin conducts electricity. So why doesn't liquid tin(IV) chloride conduct at all?

Mission 2

The metallic bond

Metallic bonding in magnesium2+2+2+2+2+2+2+2+2+2+2+2+2+Mg²⁺ iondelocalised e⁻2 delocalised electrons per Mg²⁺24 e⁻ and 12 Mg²⁺ here: neutral
  • Metal atoms release their outer electrons into a shared pool of delocalised electrons.
  • Metallic bonding: strong electrostatic attraction between positive ions (cations) and delocalised electrons.
  • The ions form a regular giant metallic lattice.
  • Bonding is non-directional: each ion attracts the electrons all around it.
Mission 2

Why metals conduct and bend

A metal bends, an ionic crystal cracksMetal: a layer of ions slides++++++++++++++++++++++++beforeafterions still surrounded by electronsIonic: the same slide+−+−−+−++−+−+−+−−+−++−+−beforeafterlike charges meet and repel:the crystal cracks
  • Electrical conductivity: delocalised electrons drift when a voltage is applied. The ions stay put.
  • Thermal conductivity: delocalised electrons carry kinetic energy quickly through the metal.
  • Malleable (hammered into shape) and ductile (drawn into wires): layers of ions slide.
  • After sliding, every ion is still surrounded by delocalised electrons: the bonding is not broken.
  • An ionic lattice is different: a shift brings like charges together. They repel and the crystal shatters.
Quick check
?Aluminium is rolled into kitchen foil less than 0.02 mm thick without cracking. Which statement explains this property of aluminium?
Mission 2

What makes metallic bonding stronger

  • Stronger with a higher ion charge and a smaller ion.
  • More delocalised electrons per ion, packed closer to each ion's centre: stronger attraction.
  • Na⁺ → Mg²⁺ → Al³⁺: melting point 98 °C → 650 °C → 660 °C.
  • Down group 1 the ions get larger: Li 181 °C, Na 98 °C, K 63 °C.
  • Mass does not decide: heavier potassium melts lower than lithium.
Mission 2

Alloys

Alloy layersPure metalAlloy+++++++++++++++++++++++++++++++++++++identical ions,regular layersa few larger atomsdisrupt the layerslayers slidesliding blockedshaded: electron sea
  • Background from the video: alloys are not examined on your course.
  • An alloy is a mixture of a metal with other elements: brass (copper, zinc), steel (iron, carbon).
  • Metallic bonding is non-directional, so other atoms fit into the lattice. The alloy still conducts.
  • Atoms of a different size disrupt the layers, so they slide less easily.
  • So alloys are usually harder and stronger than the pure metal.
Mission 2

Four types of structure

Four types of structure+−+−+−+−+Giant ionicNa⁺ and Cl⁻ ionsionic bonds2+2+2+2+2+2+2+2+2+Giant metallicMg²⁺ ions in a seaof delocalised e⁻metallic bondsGiant covalentC atomscovalent bondsthroughoutSimple molecularI₂ moleculesweak forces betweenmolecules
  • Giant ionic (e.g. NaCl): ions held by electrostatic attraction in all directions.
  • Giant metallic (e.g. magnesium): ions in a sea of delocalised electrons.
  • Giant covalent (e.g. diamond, graphite): atoms joined by covalent bonds throughout.
  • Simple molecular (e.g. iodine, ice): small molecules held by weak intermolecular forces.
  • Identify the particles and the forces between them. The properties follow.
Mission 2

Simple molecular: iodine and ice

Simple molecular lattices: iodine and iceIodine: I₂ moleculescovalent I–I, inside a moleculeweak London forces,between moleculesIce: H₂O moleculesOHHOHHOHHOHHOHHcovalent O–H, inside a moleculehydrogen bond, between moleculeslone pair on Oeach H₂O: hydrogen-bonded to 4 others
  • Iodine: I2 molecules in a regular lattice, held by weak London (van der Waals) forces.
  • Low melting point (114 °C); iodine sublimes on gentle warming. The I–I bonds do not break.
  • Ice: each H2O hydrogen-bonded to four others, tetrahedrally. An open lattice.
  • The open lattice makes ice less dense than liquid water, so ice floats.
  • Hydrogen bonds are stronger than van der Waals' forces, but far weaker than covalent bonds.
Mission 2

Properties: what conducts, and when

StructureMelting pointConducts as solidConducts as liquidIn water
Giant ionichighno: ions fixedyes: ions moveoften soluble; solution conducts
Giant metallicusually highyesyesinsoluble (some react)
Giant covalentvery highno (graphite yes)noinsoluble
Simple molecularlownonopolar ones may dissolve; solution usually does not conduct†
  • †Unless the substance reacts with water to form ions, e.g. HCl(g) → H⁺(aq) + Cl⁻(aq).
  • To conduct, a substance needs mobile charged particles: delocalised electrons, or ions free to move.
Quick check
?Four solids, P, Q, R and S, are tested.
Which pairing of substance and structure is correct?
  • P: melts at 801 °C; conducts when molten but not as a solid; dissolves in water.
  • Q: melts at 1085 °C; conducts as a solid and when molten; insoluble in water.
  • R: melts at 114 °C; does not conduct as a solid or when molten; insoluble in water.
  • S: melts at 1710 °C; does not conduct as a solid or when molten; insoluble in water.
Mission 2

Melting points across period 3

Melting points across period 3Melting point / °C−200050010001500Na98Mg650Al660Si1414P₄44S₈115Cl₂−101Ar−189giant metallicgiant covalentsimple molecular
  • Period 3: Na 98, Mg 650, Al 660, Si 1414, P 44, S 115, Cl −101, Ar −189 (°C).
  • Na → Al: giant metallic. Ion charge rises and ion size falls, so metallic bonding gets stronger.
  • Si: giant covalent. Melting breaks many strong covalent bonds: the highest.
  • P4, S8, Cl2: simple molecular. Only weak van der Waals' forces are overcome: low.
  • S8 > P4 > Cl2: bigger molecules, more electrons, stronger van der Waals' forces. Ar: single atoms, lowest.
Quick check
?Silicon melts at 1414 °C. Phosphorus (white, P4) melts at 44 °C. Which statement explains the difference?
Mission 2

Bonding is a continuum

Bonding triangle1.01.52.02.53.03.54.000.51.01.52.02.53.0ElectronegativitydifferenceAverage electronegativityIonicPolarcovalentCovalentMetallicNaClSnCl₄region boundaries are approximate
  • Ionic, covalent and metallic are models. Real bonds usually lie in between.
  • Bigger electronegativity difference: more ionic character. Smaller difference: more covalent.
  • Background (not examined on any course here): the bonding triangle plots average electronegativity (x) against difference (y). Corners: metallic, ionic, covalent.
  • NaCl: average 2.05, difference 2.3: near the ionic corner. High melting point, conducts when molten.
  • SnCl4: average 2.6, difference 1.2: polar covalent. Small molecules: liquid, no ions, no conduction.
Mission check

?Each liquid is tested with two electrodes and a bulb. Which liquid will not conduct electricity?
Recap

The big ideas

Mission 1

  • Giant covalent: strong covalent bonds throughout, so very high melting point and insoluble.
  • Diamond: 4 bonds per C, all electrons localised, hard, no conduction. Graphite: 3 bonds per C, one delocalised electron per C, conducts along layers, layers slide.

Mission 2

  • Metallic bonding: attraction between cations and delocalised electrons; non-directional, so metals conduct, are malleable and (usually) melt high.
  • To conduct, a substance needs mobile charged particles. Decide the structure, then explain the property.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Structure for CCEA A-level Chemistry. 🎉

  1. Mission 1Diamond and graphite are both pure carbon. Why does only graphite conduct electricity?
  2. Mission 2Tin conducts electricity. So why doesn't liquid tin(IV) chloride conduct at all?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to A-Level Chemistry · CCEA