← A-Level Chemistry · CCEA · A-Level Chemistry revision
⭐ 0
CCEA GCE Chemistry · Unit AS 1 / 1.3 Bonding
Mini-Lesson

Bonding

4 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1Salt is made of charged particles. So why doesn't a salt crystal conduct electricity?
  2. Mission 2Air is 78% nitrogen. Why does almost nothing react with it?
  3. Mission 3Water and methane molecules have almost the same mass. Why does water boil over 260 °C higher?
  4. Mission 4Why is a chlorine atom smaller than a sodium atom, even though it has six more electrons?
Mission 1

Mission 1: Salt is made of charged particles. So why doesn't a salt crystal conduct electricity?

Make a guess: Salt is made of charged particles. So why doesn't a salt crystal conduct electricity?

Mission 1

Which ions atoms form

Ions from atoms12+12+Mg (2,8,2)12 p, 12 e⁻Mg²⁺ (2,8)12 p, 10 e⁻lose 2 e⁻7+7+N (2,5)7 p, 7 e⁻N³⁻ (2,8)7 p, 10 e⁻gain 3 e⁻Both ions have 10 electrons,the same arrangement as neon.
  • Metal atoms lose electrons: positive ions, cations.
  • Non-metal atoms gain electrons: negative ions, anions.
  • Groups 1, 2 and 13 (3 in older numbering) lose all outer electrons: 1+, 2+, 3+.
  • Groups 15, 16 and 17 (5, 6, 7) gain enough to fill the outer shell: 3−, 2−, 1−.
  • Mg (2,8,2) loses two: Mg²⁺. N (2,5) gains three: N³⁻. Both now have neon's arrangement.
  • Charge = protons − electrons. The number of protons never changes.
Mission 1

Dot-and-cross diagrams of ions

Dot-and-cross diagram of sodium oxidebeforeNaNaOafterNa+Na+O2−2 Na⁺ : 1 O²⁻
  • Show one atom's electrons as dots, the other's as crosses.
  • Sodium oxide: two Na atoms each give one electron to one O atom.
  • Na⁺: its one outer electron has gone. Square brackets, charge + outside.
  • O²⁻: [2,8], six dots and two crosses, in square brackets, charge 2− outside.
  • Ratio of ions: 2 Na⁺ : 1 O²⁻, so Na2O.
Quick check
?An atom of element X has the electron configuration 1s² 2s² 2p⁶ 3s² 3p⁴. Which ion does X form in its ionic compounds?
Mission 1

Ionic bonds and formulae

  • Ionic bonding: strong electrostatic attraction between oppositely charged ions.
  • It acts in all directions: each ion attracts every oppositely charged neighbour.
  • Formula: total charge zero. Mg²⁺ and N³⁻ → Mg3N2.
  • Name: cation first, then the anion ending -ide: magnesium nitride.
  • Roman numerals give a metal's charge: Fe³⁺ with O²⁻ is iron(III) oxide, Fe2O3.
Mission 1

Molecular ions to know

IonFormulaIonFormula
sulfateSO4²⁻phosphatePO4³⁻
sulfiteSO3²⁻chlorate(V)ClO3⁻
thiosulfateS2O3²⁻hypochlorite (chlorate(I))ClO⁻
hydrogensulfateHSO4⁻hydroxideHO⁻ (= OH⁻; CCEA's form)
hydrogencarbonateHCO3⁻dichromate(VI)Cr2O7²⁻
carbonateCO3²⁻chromate(VI)CrO4²⁻
nitrateNO3⁻permanganate (manganate(VII))MnO4⁻
nitriteNO2⁻ammoniumNH4⁺
  • Keep each ion whole. Brackets for more than one: Ca(NO3)2, (NH4)2SO4.
Quick check
?Which formula is correct?
Mission 1

The giant ionic lattice

Ionic lattice with one sodium ion and its six chloride neighboursGiant lattice;formula = ratio of ionseach Na⁺ has6 nearest Cl⁻Na⁺Cl⁻
  • Ionic compounds form a giant lattice: a regular 3-D array of alternating cations and anions.
  • The array maximises attractions between opposite charges and minimises repulsions between like ones.
  • There are no molecules. Al2O3 means 2 Al³⁺ for every 3 O²⁻.
  • In sodium chloride each Na⁺ is surrounded by 6 Cl⁻, and each Cl⁻ by 6 Na⁺.
Mission 1

Properties from the lattice

  • High melting point, very low volatility: every ion is held by many strong attractions.
  • Brittle: a blow shifts a layer, like charges meet, they repel, and the crystal splits.
  • Conducts only when molten or in solution: then the ions are free to move and carry charge.
  • Solid: no conduction. The ions are fixed in the lattice, and there are no free electrons.
  • Often soluble in water: polar water molecules attract the ions out of the lattice.
  • Test it: a conductivity meter reads zero for the solid, but a current flows in the melt and in solution.
Quick check
?Sodium chloride has a very low volatility: it does not evaporate at room temperature and melts only at 801 °C. Which explanation is correct?
Mission 1

How strongly a lattice holds together

Ion charge, size and attraction1+1−1+ and 1−centre to centre2+2−2+ and 2−centre to centrelarger ionssmaller ionslonger distanceshorter distancestronger attraction,higher melting point
  • The attraction is stronger when ions have larger charges and smaller radii (centres closer).
  • Same charges, size decides: NaF melts at 993 °C, NaCl 801 °C, KCl 770 °C.
  • Double both charges, with ions about the size of NaF's: MgO (Mg²⁺, O²⁻) melts at about 2850 °C.
Quick check
?Ionic radii (pm): Na⁺ 102, K⁺ 138, F⁻ 133, Cl⁻ 181. Which shows the strength of the ionic bonding in NaF, NaCl and KCl in decreasing order?
Mission check

?In a kettle's heating element, the hot metal wire is packed in powdered magnesium oxide, MgO, inside a metal tube. MgO is ionic, yet it is used here as an electrical insulator. Why doesn't it conduct?
Mission 2

Mission 2: Air is 78% nitrogen. Why does almost nothing react with it?

Make a guess: Air is 78% nitrogen. Why does almost nothing react with it?

Mission 2

What a covalent bond is

Covalent bond++attractattractrepelrepelshared pairBoth nuclei attract the shared pair.The two nuclei repel each other.Bond length: attraction = repulsion.
  • Covalent bond: the strong electrostatic attraction between a shared pair of electrons and the nuclei of the two bonded atoms.
  • The pair sits between the nuclei; both pull on it, holding the atoms together.
  • Too close, and the two nuclei repel: the bond length is where attraction and repulsion balance.
  • Lone pair: a pair of outer electrons not used in bonding.
  • Octet rule: atoms tend to end up with eight outer electrons. A tendency, not a law.
Quick check
?What holds the hydrogen atom and the chlorine atom together in a molecule of hydrogen chloride, HCl?
Mission 2

Drawing the electrons

Dot-and-cross diagrams of CO2, N2 and the hydroxide ionOCOCO₂ · 16 outer e⁻NNNNN₂ · 10 outer e⁻OH−▲ extra e⁻[OH]⁻ · 8 outer e⁻
  • A dot-and-cross diagram shows every outer electron: one atom's as dots, the other's as crosses.
  • 1. Count the outer electrons. Add one per negative charge; remove one per positive charge.
  • 2. Join the atoms by single bonds. 3. Complete the outer atoms' octets with lone pairs.
  • 4. Spare electrons go on the central atom. Too few? Share more pairs: multiple bonds.
  • CO2: 16 outer electrons. O=C=O, two lone pairs on each O.
  • N2: 10 outer electrons. N≡N, one lone pair on each N.
  • An ion goes in square brackets, charge outside: [O–H]⁻, three lone pairs on O.
  • Draw a covalent bond as a line once you know the pairs.
Mission 2

Fewer than eight

Incomplete octets: BF3 and BeCl2BFFFBeClClBF₃B has 6 e⁻BeCl₂Be has 4 e⁻
  • The octet rule has limitations.
  • BF3: boron's three outer electrons make three bonds. B has only 6.
  • BeCl2: beryllium has only 4.
Quick check
?Boron trichloride, BCl3, is a covalent molecule (boron is in group 13; chlorine is in group 17). In its dot-and-cross diagram, how many electrons are in the outer shell of the boron atom?
Quick check
?Which describes a correct dot-and-cross diagram for the cyanide ion, CN⁻?
Mission 2

Single, double, triple

Single, double and triple carbon-carbon bondsBond length / pmC–C154C=C134C≡C120Mean bond enthalpy / kJ mol⁻¹C–C346C=C614C≡C839More shared pairs: shorter, stronger
  • Single, double and triple bonds share one, two and three pairs.
  • More shared pairs pull the nuclei closer: the bond is shorter and stronger.
BondShared pairsLength / pmMean (average) bond enthalpy / kJ mol⁻¹
C–C1154346
C=C2134614
C≡C3120839
  • For bonds between the same two atoms: the shorter the bond, the stronger it is.
Mission 2

One atom supplies both electrons

Co-ordinate bondsOHHH₂O+H⁺OHHH+[H₃O]⁺Arrow: donor → acceptor
  • Co-ordinate (dative covalent) bond: a shared pair with both electrons from one atom.
  • The donor has a lone pair. The acceptor has room for a pair.
  • H2O + H⁺ → H3O⁺: an O lone pair goes to H⁺. NH3 + H⁺ → NH4⁺ forms the same way.
  • Draw it as an arrow from donor to acceptor: O→H.
  • Once formed, it is identical to the others: all three O–H bonds in H3O⁺ match.
Quick check
?Ammonia, NH3, reacts with a hydrogen ion, H⁺, to form the ammonium ion, NH4⁺. Which statement about the bonds in NH4⁺ is correct?
Mission check

?Carbon monoxide, CO, has 10 outer electrons, the same as N2. Like N2, it has a triple bond and one lone pair on each atom. Which describes the three shared pairs?
Mission 3

Mission 3: Water and methane molecules have almost the same mass. Why does water boil over 260 °C higher?

Make a guess: Water and methane molecules have almost the same mass. Why does water boil over 260 °C higher?

Mission 3

Polar bonds

Bond dipole and electronegativity trendδ+δ−HCl2.23.2electronegativity of each atombond dipoleElectronegativity in the periodic tableLiBeBCNOFNaMgAlSiPSClKCaGaGeAsSeBrrises across a periodrises up a group: F is highest
  • Electronegativity: the ability of an atom to attract the bonding pair of electrons in a covalent bond. Pauling scale.
  • Rises across a period (more protons, same shielding, smaller atom) and falls down a group (bigger atom, more shielding).
  • Different electronegativities: the pair is shared unequally. A polar bond: δ+ and δ−.
  • H–Cl: H 2.2, Cl 3.2. δ− on Cl. C–H (2.6, 2.2) is treated as non-polar.
  • Bigger difference, more polar. Very large difference: ionic. Bonding is a continuum.
Quick check
?Electronegativity values: H 2.2, C 2.6, O 3.4, F 4.0, P 2.2. Which bond is the most polar?
Mission 3

Polar molecules

Do bond dipoles cancel?Dipoles cancel: non-polarCOOCO₂BFFFBF₃CClClClClCCl₄bond dipoles sum to zeroDipoles do not cancel: polarOHHH₂OCClHClHCH₂Cl₂green arrow = resultant dipolered arrows = bond dipolesC–H bonds: little polarity, not drawnTest: a charged rod and a thin stream±charged rod±charged rodpolar liquid:stream bends to the rodnon-polar liquid:falls straightbends the same way for a + or − rod
  • A molecule is polar if its bond dipoles leave a permanent dipole overall.
  • Equal dipoles arranged symmetrically cancel: CO2, BF3 and CCl4 are non-polar.
  • In H2O, NH3 and CH2Cl2 they don't cancel: polar.
  • Check both: are the bonds polar, and does the shape cancel them?
  • Test: a charged rod bends a thin stream of a polar liquid from a burette. A non-polar liquid falls straight.
Quick check
?Water, H2O, is a polar molecule with a permanent dipole (electronegativity: H 2.2, O 3.4). Which statement explains this?
Mission 3

Forces between molecules

Forces between moleculesLondon forcesδ−δ+temporarydipoleδ−δ+induceddipoledipole–dipoleδ+δ−HClClHδ−δ+two HCl molecules
  • van der Waals' forces (induced dipole–dipole) act between all molecules.
  • Electrons move: a temporary dipole forms and induces a dipole in a neighbour. They attract.
  • More electrons and more surface contact: stronger van der Waals' forces.
  • Permanent dipole–dipole: δ+ of one polar molecule attracts δ− of another (two HCl molecules).
  • London forces are called van der Waals' forces (induced dipoles) in your course.
  • All are much weaker than covalent or ionic bonds.
Mission 3

Hydrogen bonding

Hydrogen bonding in waterOHHOHHOHHOHHOHHcovalent O–H, inside a moleculehydrogen bond, between moleculeslone pair on OIceopen latticeLiquid watercloser, denser
  • Hydrogen bond: an H atom bonded to N, O or F (δ+) attracts a lone pair on N, O or F of another molecule.
  • Drawn as a dotted line, O–H⋯O roughly straight.
  • The O–H bond inside water is covalent; the hydrogen bond is between molecules.
  • Water forms up to four per molecule. Ice: an open lattice, so ice is less dense than water.
  • Anomalously high boiling points: H2O, NH3 and HF boil far above the trend of their groups.
Quick check
?Liquid methanol, CH3OH, contains hydrogen bonds. What is a hydrogen bond in methanol?
Mission 3

Ranking the forces

Boiling points of molecules of similar massBoiling point / °C−200−150−100−50050100−183 °CO₂Mᵣ 32.0Londonforces only−60 °CH₂SMᵣ 34.1dipole–dipole65 °CCH₃OHMᵣ 32.0hydrogenbonding
  • At similar molar mass: London < permanent dipole–dipole < hydrogen bonding.
  • O2, H2S and CH3OH: Mᵣ 32.0, 34.1 and 32.0.
  • O2, London only: boils at −183 °C.
  • H2S, polar, adds dipole–dipole: −60 °C.
  • CH3OH adds hydrogen bonds: 65 °C.
  • Very different masses? van der Waals' forces can win: octane, C8H18, non-polar but far heavier, boils at 126 °C.
  • Alkanes: longer chain, higher bp. Branched isomers: less contact, lower bp.
  • Halogenoalkanes: bp rises C–Cl < C–Br < C–I; branched isomers boil lower.
Quick check
?Propane, CH3CH2CH3 (Mᵣ 44.11), ethanal, CH3CHO (Mᵣ 44.06), and ethanol, CH3CH2OH (Mᵣ 46.08), have comparable molar masses. Which lists them in order of increasing boiling point?
Mission 3

Simple molecular substances

Simple molecular lattices: iodine and iceIodine: I₂ moleculescovalent I–I, inside a moleculeweak London forces,between moleculesIce: H₂O moleculesOHHOHHOHHOHHOHHcovalent O–H, inside a moleculehydrogen bond, between moleculeslone pair on Oeach H₂O: hydrogen-bonded to 4 others
  • Melting and boiling overcome forces between molecules. Covalent bonds stay intact.
  • Weak forces: low melting and boiling points. No ions or free electrons: no conduction.
  • Iodine: a lattice of I2 molecules held by van der Waals' forces. It sublimes on gentle warming.
  • Ice: each H2O hydrogen bonded to four others in an open, tetrahedral lattice.
Mission 3

Solubility: like dissolves like

Dissolving: particle viewsNa⁺ in waterNa⁺OHHOHHOHHOHHO (δ−) toward the ionCl⁻ in waterCl⁻OHHOHHOHHOHHH (δ+) toward the ionEthanol in waterOHHOCH₃CH₂HOHHboth O–H⋯O links are hydrogen bondsIodine in hexaneLondon forces only
  • A solute dissolves if new solute–solvent attractions make up for those broken.
  • Ionic compounds in water: polar water molecules surround the ions (hydration).
  • Alcohols: the O–H hydrogen bonds to water. Short chains mix; longer chains dissolve less.
  • Polar molecules that can't hydrogen bond (halogenoalkanes) barely dissolve in water.
  • Non-polar solutes dissolve in non-polar solvents: I2 in hexane.
  • Aldehydes, ketones and esters: no H-bonds between their molecules, but they accept H-bonds from water. Carboxylic acids H-bond to each other: higher boiling points.
  • Amines (N–H) hydrogen bond to each other and to water.
Quick check
?Ethanol, CH3CH2OH, mixes with water in all proportions, but hexane, C6H14, does not dissolve in water. Which statement explains this difference?
Mission 3

Separating by attractions: chromatography

Paper chromatogram2.4 cm8.0 cmpencil baselinesolvent frontspotBoth distances start at the baseline.
  • You'll meet chromatography in detail later; here is why it works.
  • A spot of mixture sits on a stationary phase (paper, or a TLC plate). A solvent, the mobile phase, moves up through it.
  • Each component is attracted to both phases. More attraction to the stationary phase: it moves less.
  • Rf = distance moved by spot ÷ distance moved by solvent, both from the baseline.
  • Spot 2.4 cm, solvent 8.0 cm: Rf = 0.30. Same conditions, same substance, same Rf.
Mission check

?Ammonia, NH3 (Mᵣ 17.0), boils at −33 °C. Phosphine, PH3 (Mᵣ 34.0), boils at −88 °C. Electronegativity: H 2.2, N 3.0, P 2.2. Why does the lighter molecule boil higher?
Mission 4

Mission 4: Why is a chlorine atom smaller than a sodium atom, even though it has six more electrons?

Make a guess: Why is a chlorine atom smaller than a sodium atom, even though it has six more electrons?

Mission 4

Three factors explain every trend

Three factorsNaCl11+17+same scalenuclear charge: 11+ and 17+distance: shell 3 is smaller in Clshielding: 10 inner electrons in both
  • Nuclear charge: more protons, a stronger pull on the outer electrons.
  • Distance: outer electrons in a higher shell are further away, so pulled less.
  • Shielding: inner electrons repel outer ones, reducing the pull they feel.
  • Across a period: nuclear charge rises, same shell, similar shielding → stronger pull.
  • Down a group: a new shell adds distance and shielding → weaker pull, despite more protons.
Mission 4

Atomic radius

Atomic radius trendsacross period 3NaMgAlSiPSClArsmaller across the periodAr: radius not directly comparabledown group 1LiNaKlarger
  • Across a period, atomic radius decreases. Down a group, it increases.
  • Na: 11 protons. Cl: 17 protons. Both have 10 inner electrons and outer electrons in shell 3.
  • Chlorine's six extra electrons join the same shell. Electrons in one shell shield each other poorly.
  • So the outer shell feels a much larger net pull and is drawn closer: Cl is smaller.
Mission 4

Ionic radius

Ionsatom → ionNaNa+ClCl−isoelectronic ions10 electrons each: 1s2 2s2 2p6N3−7O2−8F−9Na+11Mg2+12Al3+13number = protons
  • Background: ionic size returns in lattice energy and bonding.
  • Positive ions are smaller than their atoms: Na → Na⁺ loses the whole outer shell.
  • Negative ions are larger than their atoms: Cl → Cl⁻ has the same 17 protons but more electron repulsion.
  • Down a group, ions with the same charge get larger: Li⁺ < Na⁺ < K⁺; F⁻ < Cl⁻ < Br⁻.
  • Isoelectronic ions share a configuration; more protons → smaller ion.
  • N³⁻ > O²⁻ > F⁻ > Na⁺ > Mg²⁺ > Al³⁺: all 1s² 2s² 2p⁶, with 7 to 13 protons.
Mission 4

First ionisation energy

First ionisation energy050010001500200025005101520HeLiNeNaArKatomic number, Zfirst IE / kJ mol−1period 3 / kJ mol−1Na496Mg738Al578Si787P1012S1000Cl1251Ar1521
  • First ionisation energy: the energy needed to remove 1 mol of electrons from 1 mol of gaseous atoms, forming 1 mol of gaseous 1+ ions.
  • Na(g) → Na⁺(g) + e⁻.
  • Across a period it generally increases: more protons, same shell, similar shielding.
  • Down a group it decreases: the outer electron is further away and more shielded.
  • Small dips (Mg → Al, P → S) are explained in an earlier lesson.
Quick check
?The first ionisation energy of magnesium is lower than that of beryllium. Which explains this?
Mission 4

Electron affinity

  • Background here; you'll use it in Born–Haber cycles.
  • First electron affinity: the enthalpy change when each atom in 1 mol of gaseous atoms gains one electron, forming 1 mol of gaseous 1− ions: X(g) + e⁻ → X⁻(g).
  • Energy is usually released: the nucleus attracts the incoming electron.
  • Across a period: more protons, same shell → more energy released.
  • Down a group: further away, more shielded → less energy released.
  • Many exceptions. Cl (−349 kJ mol⁻¹) releases more than F (−328 kJ mol⁻¹): fluorine's small, crowded atom repels the newcomer.
Mission 4

Electronegativity

  • Electronegativity: the ability of an atom to attract the pair of electrons in a covalent bond.
  • Pauling scale, no units. Fluorine is highest, 4.0.
  • Increases across a period and decreases down a group: the same three factors.
  • Period 3: Na 0.9 → Cl 3.0.
  • Not electron affinity: that is measured on isolated gaseous atoms.
Quick check
?Fluorine is more electronegative than chlorine. Which explains this?
Mission 4

Melting points across Period 3

Melting points across period 3melting point / °C (period 3)−20005001000150098Na650Mg660Al1414Si44P4115S8−101Cl2−189Argiant metallicgiant covalentsimple molecularP4: white phosphorus · S8: rhombic sulfur
  • Period 3: m.p. rises Na → Mg → Al, peaks at Si, then drops sharply.
  • Na, Mg, Al: giant metallic. More delocalised electrons and smaller, more highly charged ions → stronger metallic bonding → m.p. rises.
  • Si: giant covalent. Melting breaks many strong covalent bonds → highest m.p.
  • P4, S8, Cl2, Ar: simple molecular (Ar: atoms). Melting overcomes only weak van der Waals' forces.
  • S8 > P4 > Cl2 > Ar: more electrons per molecule → stronger van der Waals' forces.
Quick check
?Why does silicon have the highest melting point of the Period 3 elements?
Mission 4

All the trends on one map

  • Across a period → radius decreases; IE and electronegativity increase.
  • Down a group → radius increases; IE and electronegativity decrease.
  • The pattern repeats in each period: this is periodicity.
  • Metallic character increases down a group and towards the left.
Mission check

?An argon atom has seven more electrons than a sodium atom, yet argon's first ionisation energy is about three times sodium's. Which explains this?
Recap

The big ideas

Mission 1

  • Ions form by losing or gaining electrons; charges balance to zero in the formula.
  • A giant lattice of fixed ions: high melting point, brittle, conducts only when molten or dissolved.
  • Higher charges and smaller ions → stronger attraction.

Mission 2

  • A covalent bond is the attraction of two nuclei for a shared pair; in a co-ordinate bond one atom supplies both electrons.
  • More shared pairs: shorter, stronger bond. N≡N is why nitrogen is so unreactive.

Mission 3

  • Unequal sharing gives polar bonds; a molecule is polar only if its shape stops the dipoles cancelling.
  • Similar mass: London < permanent dipole–dipole < hydrogen bonds. Boiling overcomes these, not covalent bonds.

Mission 4

  • Nuclear charge, distance and shielding explain radius, ionisation energy, electron affinity and electronegativity.
  • Across a period: more protons, same shell → smaller atoms that hold electrons more tightly.
  • Melting points across a period follow structure: giant metallic → giant covalent → simple molecular.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Bonding for CCEA A-level Chemistry. 🎉

  1. Mission 1Salt is made of charged particles. So why doesn't a salt crystal conduct electricity?
  2. Mission 2Air is 78% nitrogen. Why does almost nothing react with it?
  3. Mission 3Water and methane molecules have almost the same mass. Why does water boil over 260 °C higher?
  4. Mission 4Why is a chlorine atom smaller than a sodium atom, even though it has six more electrons?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to A-Level Chemistry · CCEA