← A-Level Chemistry · CCEA · A-Level Chemistry revision
⭐ 0
CCEA GCE Chemistry · Unit A2 2 / 5.11 Chemistry in medicine
Mini-Lesson

Chemistry in medicine

2 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1How can you titrate a tablet that won't even dissolve in water?
  2. Mission 2How can the same chemical burn away a wart and protect a newborn baby's eyes?
Mission 1

Mission 1: How can you titrate a tablet that won't even dissolve in water?

Make a guess: How can you titrate a tablet that won't even dissolve in water?

Mission 1

When you can't titrate directly

Back titration flowacid added (known excess)acid that reactedwith CaCO₃left overin the flaskCaCO₃ in tabletNaOH
  • Some samples can't go straight into a titration: an insoluble solid (CaCO3, MgO), a slow reaction, or no sharp end point.
  • Back titration: add a known excess of a standard acid. The solid reacts completely.
  • Then titrate the leftover acid with a standard alkali.
  • Acid that reacted = acid added − acid left over.
  • Indigestion remedies (hydroxides and carbonates) neutralise excess stomach acid. A back titration finds how much active ingredient a tablet contains.
Mission 1

Worked example: an indigestion tablet

Back titration flowacid added: 0.02500 mol HClreacted with CaCO₃0.01604 molleft over0.00896 mol÷ 2CaCO₃ : HCl= 1 : 2CaCO₃0.00802 molNaOHHCl : NaOH = 1 : 1
  • A 1.250 g tablet (active ingredient CaCO3) is added to 50.0 cm³ of 0.500 mol dm⁻³ HCl. The leftover acid needs 22.40 cm³ of 0.400 mol dm⁻³ NaOH.
  • CaCO3(s) + 2HCl(aq) → CaCl2(aq) + H2O(l) + CO2(g). Assume nothing else in the tablet reacts with acid.
  • Acid added: 0.500 × 0.0500 = 0.02500 mol.
  • Acid left: n(NaOH) = 0.400 × 0.02240 = 0.00896 mol (HCl : NaOH = 1 : 1).
  • Acid reacted: 0.02500 − 0.00896 = 0.01604 mol.
  • n(CaCO3) = 0.01604 ÷ 2 = 0.00802 mol; mass = 0.00802 × 100.1 = 0.803 g = 64.2% of the tablet.
Quick check
?In a back titration, an insoluble carbonate is added to excess hydrochloric acid, and the leftover acid is titrated with sodium hydroxide. Which amount equals the moles of HCl that reacted with the carbonate?
Mission 1

Dilutions and portions

Dilution and portion250.0 cm³volumetricflaskpipette25.0 cm³conical flaskmoles:totalmoles:total ÷ 10
  • A solution is made up to 250.0 cm³ in a volumetric flask. A 25.0 cm³ portion is pipetted out and titrated.
  • The portion holds one tenth of the total moles. Scale back up: × 10.
  • Diluting changes concentration, not moles: c1V1 = c2V2.
  • Track moles through every step. Scale at the right moment, and say what each number is the moles of.
Quick check
?10.0 cm³ of vinegar is diluted to 100.0 cm³ in a volumetric flask. A 25.0 cm³ portion needs 20.75 cm³ of 0.100 mol dm⁻³ NaOH. CH3COOH + NaOH → CH3COONa + H2O. What was the concentration of ethanoic acid in the original vinegar, in mol dm⁻³?
Calculate

Limestone purity

?1.25 g of powdered limestone is added to 50.0 cm³ of 1.00 mol dm⁻³ HCl (excess). When the fizzing stops, the mixture is made up to 250.0 cm³. 25.0 cm³ portions need a mean titre of 27.50 cm³ of 0.100 mol dm⁻³ NaOH. Calculate the percentage by mass of CaCO3 in the limestone. (Aᵣ: C 12.0, O 16.0, Ca 40.1)
Mission 1

Water of crystallisation by titration

  • Washing soda is Na2CO3·xH2O. Titration finds x.
  • 2.86 g is dissolved and made up to 250.0 cm³. 25.0 cm³ portions need 20.00 cm³ of 0.100 mol dm⁻³ HCl (methyl orange).
  • Na2CO3(aq) + 2HCl(aq) → 2NaCl(aq) + H2O(l) + CO2(g).
  • n(HCl) = 2.000 × 10⁻³ mol, so n(Na2CO3) = 1.000 × 10⁻³ mol in 25.0 cm³; 0.01000 mol in 250.0 cm³.
  • Mr = 2.86 ÷ 0.01000 = 286. Water: 286 − 106.0 = 180 = 10 × 18.0, so x = 10.
Mission 1

Aspirin by titration

  • Aspirin, C9H8O4 (Mr 180.0), has one –COOH group: a weak monoprotic acid.
  • Dissolve it in ethanol. Titrate with NaOH(aq), using phenolphthalein (weak acid + strong base). Ratio 1 : 1.
  • Example: 25.0 cm³ of aspirin solution needs 15.30 cm³ of 0.100 mol dm⁻³ NaOH.
  • n = 0.100 × 0.01530 = 1.53 × 10⁻³ mol; c = 1.53 × 10⁻³ ÷ 0.0250 = 0.0612 mol dm⁻³ (0.275 g of aspirin in the sample).
  • Titrate cold and quickly: warm NaOH also hydrolyses the ester group, using extra NaOH.
  • Or use that hydrolysis: warm with a measured excess of NaOH (2 mol NaOH per mol aspirin), then back titrate the leftover NaOH with standard acid.
Mission check

?An impure sample of magnesium oxide, an insoluble base, is analysed by back titration. MgO(s) + 2HCl(aq) → MgCl2(aq) + H2O(l). Assume the impurities do not react with acid.
  • 0.400 g of the sample is added to 25.0 cm³ of 1.00 mol dm⁻³ HCl (excess). The leftover acid needs 14.30 cm³ of 0.500 mol dm⁻³ NaOH. What is the percentage by mass of MgO in the sample? (Aᵣ: O 16.0, Mg 24.3)
Mission 2

Mission 2: How can the same chemical burn away a wart and protect a newborn baby's eyes?

Make a guess: How can the same chemical burn away a wart and protect a newborn baby's eyes?

Mission 2

Skin and pH

Skin on the pH scale02468101214pHhealthy skin, about 5strong acidcorrosivestrong alkalicorrosiveacidfront stays shallowalkalifront spreads deeperskin cross-sections
  • Healthy skin is slightly acidic: its surface is about pH 5.
  • Strong acids and alkalis are corrosive: they denature the proteins in skin cells.
  • Alkalis also hydrolyse fats in cell membranes (saponification), so an alkali burn keeps spreading deeper.
  • Acids coagulate surface proteins, which slows their spread. Both still need treating at once.
Mission 2

Acid or alkali on the skin

Chemical splash first aid123Brush offdry powderCool running waterfor 20+ minutesGet medical helpacidDo not neutralisewith acid or alkali
  • Dry powder (e.g. quicklime, CaO): brush it off first. With water it forms Ca(OH)2 and releases heat (see Group II).
  • Then flood with plenty of cool running water for at least 20 minutes. Remove contaminated clothing.
  • Water dilutes and washes away the acid or alkali, carries away heat, and brings the skin back towards its normal pH.
  • Do not try to neutralise it with a strong acid or alkali: neutralisation is exothermic, and the neutraliser is itself corrosive.
  • Then get medical help.
Quick check
?A builder gets a splash of dry quicklime powder, CaO, on his forearm. What should be done first?
Mission 2

Corrosive chemicals and warts

Wart treatment: only the wart is treatedSalicylic acid paintpetroleumjellywart:thick keratinCaustic pencil (AgNO₃ tip)petroleumjellytreated:grey-black
  • A wart is a small growth of thickened skin, caused by a virus (human papillomavirus).
  • Treatment: a corrosive chemical destroys the wart's skin cells, layer by layer.
  • Salicylic acid (2-hydroxybenzoic acid, the starting material for aspirin) paints are used daily for weeks. It breaks down the thick keratin layer.
  • Soak and gently file away the dead skin between applications.
  • Protect the healthy skin around the wart (e.g. with petroleum jelly or a plaster): the acid attacks healthy skin just as well.
Mission 2

A silver nitrate stick

Wart treatment: only the wart is treatedSalicylic acid paintpetroleumjellywart:thick keratinCaustic pencil (AgNO₃ tip)petroleumjellytreated:grey-black
  • A caustic pencil has a tip of solid silver nitrate, AgNO3 (often mixed with KNO3).
  • Moisten the tip and press it on the wart: concentrated Ag⁺ ions combine with the proteins in the cells and kill them.
  • The treated skin turns grey-black: Ag⁺ is reduced to silver metal, helped by light. It wears off as the skin renews.
Quick check
?Why must the skin around a wart be protected before a salicylic acid or silver nitrate treatment is applied?
Mission 2

Silver nitrate in the eye

Silver ions bind proteinabout 1%kills bacteriaAg⁺ binds –SH groups in proteinsSHAg⁺
  • Newborn babies can catch a serious eye infection from bacteria in the birth canal (ophthalmia neonatorum).
  • From 1881 (Credé), a drop of dilute silver nitrate was put in each eye at birth (later standardised at 1%). It greatly reduced blindness from this infection.
  • Dilute silver nitrate was also used to treat eye infections, for the same reason.
  • Ag⁺ ions kill bacteria: they bind to sulfur-containing (–SH) groups in bacterial proteins and enzymes.
  • Dilute, so it kills bacteria without destroying the eye. Even so, it often irritated the eye.
  • It has largely been replaced by antibiotic ointments.
Quick check
?The eye drops were a 1% (w/v) solution: 1.00 g of AgNO3 in every 100 cm³. What is the concentration of AgNO3 in mol dm⁻³? (Ar: Ag 107.9, N 14.0, O 16.0)
Mission 2

Strength decides the job

One ion, two strengthsconcentrateddestroys tissueabout 1%kills bacteriaAgNO₃Same Ag⁺ in both:it binds –SH groups in proteinsproteinSHAg⁺
  • Concentrated Ag⁺ (solid stick): destroys tissue, so it removes warts.
  • Dilute Ag⁺ (about 1% drops): kills bacteria but does little lasting harm to the eye.
  • Same ion, same action on proteins: the concentration decides whether it kills only microbes or the cells too.
Mission check

?In the 1960s, dressings soaked in 0.5% silver nitrate solution were used on large burns, while sticks of almost pure silver nitrate are used to remove warts. Which explanation fits both uses?
Recap

The big ideas

Mission 1

  • Back titration: acid reacted = acid added − acid left over; then use the equation's ratio.
  • With dilutions and portions, track moles step by step and scale (× 10 for a 25 of 250 portion).

Mission 2

  • Acid or alkali on skin: brush off any solid, then flood with plenty of water. Don't neutralise with a strong acid or alkali.
  • Warts are removed by corrosive chemicals (salicylic acid, silver nitrate); protect the healthy skin around them.
  • Silver nitrate: concentrated destroys tissue (warts); dilute (about 1%) kills bacteria (newborn eye drops, now mostly replaced by antibiotics).
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Chemistry in medicine for CCEA A-level Chemistry. 🎉

  1. Mission 1How can you titrate a tablet that won't even dissolve in water?
  2. Mission 2How can the same chemical burn away a wart and protect a newborn baby's eyes?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to A-Level Chemistry · CCEA