← A-Level Chemistry · CCEA · A-Level Chemistry revision
⭐ 0
CCEA GCE Chemistry · Unit A2 2 / 5.7 Amines
Mini-Lesson

Amines

4 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1Fish smells fishy because of amines. Why does a squeeze of lemon juice take the smell away?
  2. Mission 2How can a chemist make a molecule's carbon chain exactly one atom longer?
  3. Mission 3Benzene is as colourless as water. Why do two benzene rings joined by two nitrogen atoms make an orange solid?
  4. Mission 4Why do chemists plan the route to a new molecule by starting from the finished product?
Mission 1

Mission 1: Fish smells fishy because of amines. Why does a squeeze of lemon juice take the smell away?

Make a guess: Fish smells fishy because of amines. Why does a squeeze of lemon juice take the smell away?

Mission 1

What is an amine?

The amine family and an amideNHHHammonianot an amineNH2butylamineprimary (1°)NH2phenylamineprimary (1°)NHCH3CH3dimethylaminesecondary (2°)NCH3CH3CH3trimethylaminetertiary (3°)CCH3ONH2ethanamideamide: N next to C=O
  • Take ammonia, NH3. Replace H atoms with alkyl or aryl groups: an amine.
  • Primary: one C on the N, e.g. butylamine, CH3CH2CH2CH2NH2, and phenylamine, C6H5NH2.
  • Secondary: two C on the N, e.g. (CH3)2NH. Tertiary: three, e.g. (CH3)3N.
  • Every amine N has a lone pair. That drives all its chemistry.
  • Amide, not amine: N bonded to a C=O carbon (–CONH2, –CONHR).
Quick check
?Which statement about the compound (CH3)3CNH2 is correct?
Mission 1

Hydrogen bonding in amines

Hydrogen bonding in methylamine, and boiling pointsMethylamine + methylamineCH3NHHNCH3HHδ+δ−N–H···N hydrogen bondMethylamine + waterOHHNCH3HHδ+δ−water H bonds to the N lone pairBoiling points, similar Mr−100−50050boiling point / °C−89ethaneMr 30−6methylamineMr 3165methanolMr 32
  • Primary and secondary amines have N–H bonds: they form hydrogen bonds between molecules.
  • So their boiling points are higher than alkanes of similar Mr...
  • ...but lower than alcohols: N is less electronegative than O, so the H bonds are weaker.
  • Tertiary amines have no N–H: no hydrogen bonds between their molecules.
  • Small amines dissolve in water: the N lone pair accepts hydrogen bonds from water.
Mission 1

Amines are bases

Amines accept H+ from water, acid and are freed by alkaliIn water: weak baseNRHHHOH⇌RNH3++ OH−R = CH3CH2CH2CH2–alkaline solutionWith acid: a saltNRHHHClRNH3+ Cl−saltionic: does not evaporateAdd NaOH: amine backNRHHHOHRNH2+ H2Oalkali frees the amineRNH2+ acidRNH3+ saltnot volatile
  • The N lone pair accepts H⁺: amines are bases, like ammonia.
  • In water, a weak base: CH3CH2CH2CH2NH2 + H2O ⇌ CH3CH2CH2CH2NH3⁺ + OH⁻. The solution is alkaline.
  • With acids, salts: CH3CH2CH2CH2NH2 + HCl → CH3CH2CH2CH2NH3⁺Cl⁻ (butylammonium chloride). No water forms.
  • Add NaOH to the salt and the free amine comes back: RNH3⁺ + OH⁻ → RNH2 + H2O.
  • Back to the opening question: fishy-smelling amines are volatile. Lemon's acid turns them into ionic salts, which don't evaporate.
Mission 1

Which is the strongest base?

Which amine has the most available lone pairLone pair availabilitymorelessNH2e− density pushed to NNHHHreferenceNH2lone pair delocalisedethylaminestronger than NH3ammoniaphenylaminemuch weaker
  • Base strength depends on how available the N lone pair is to accept H⁺.
  • Alkyl groups push electrons towards N (positive inductive effect). Lone pair more available: stronger base than NH3.
  • Phenyl: the lone pair is partly delocalised into the ring. Less available: much weaker base than NH3.
  • Order: primary aliphatic amine > ammonia > phenylamine.
  • More alkyl groups, more available lone pair: 3° > 2° > 1° by this argument. (In water, measured values put 3° below 2°, and sometimes below 1°: how well the ion is hydrated also counts.)
  • Amides are barely basic: the N lone pair is delocalised onto the C=O group.
Quick check
?Which lists ethylamine, ammonia and phenylamine in order of base strength, strongest first?
Mission 1

Making aliphatic amines

Two routes to butylamineCH3CH2CH2CH2Br1-bromobutane1excess NH3 in ethanolheat, sealed tube+ NH4Brsome 2° and 3° amine tooCH3CH2CH2CH2NH2butylamine2+ 4[H]LiAlH4 (lithal)in dry etherprimary amine onlyCH3CH2CH2CNbutanenitrile
  • Route 1: halogenoalkane + excess ammonia in ethanol, heated in a sealed tube.
  • CH3CH2CH2CH2Br + 2NH3 → CH3CH2CH2CH2NH2 + NH4Br
  • Excess NH3 makes the primary amine the main product, but some 2° and 3° amine still forms.
  • Route 2: reduce a nitrile: CH3CH2CH2CN + 4[H] → CH3CH2CH2CH2NH2. Only the primary amine forms.
  • Reducing agent: LiAlH4 (lithal) in dry ether.
Mission 1

Making aromatic amines

Making phenylamine in two stages1ReduceNO2nitrobenzeneSn / conc. HClheat under reflux+ 6[H]NH3phenylammoniumion (a salt)2Free the amine+ NaOH(aq)NH2phenylamine
  • Reduce nitrobenzene with tin and concentrated HCl, heated under reflux.
  • C6H5NO2 + 6[H] → C6H5NH2 + 2H2O
  • In all that acid, the product is the phenylammonium ion, C6H5NH3⁺: a salt.
  • Add NaOH(aq) to free phenylamine: C6H5NH3⁺ + OH⁻ → C6H5NH2 + H2O.
  • Nitrobenzene comes from nitrating benzene.
Quick check
?Nitrobenzene is heated under reflux with tin and concentrated hydrochloric acid. Excess sodium hydroxide solution is then added before the phenylamine is separated. Why is the NaOH needed?
Mission 1

Amines + acyl chlorides: amides

Butylamine reacts with ethanoyl chloride to give an amideAcyl chloride + amineCH3COCl+ 2CH3CH2CH2CH2NH2CH3CONHCH2CH2CH2CH3+CH3CH2CH2CH2NH3+Cl−Primary and secondary amideCCH3ONHHCCH3ONHethanamidetwo N–HN-butylethanamideone N–H kept
  • The N lone pair attacks the δ+ carbonyl carbon of an acyl chloride.
  • Ammonia gives a primary amide, RCONH2. A primary amine gives a secondary (N-substituted) amide, RCONHR′.
  • CH3COCl + 2CH3CH2CH2CH2NH2 → CH3CONHCH2CH2CH2CH3 + CH3CH2CH2CH2NH3⁺Cl⁻
  • Product: N-butylethanamide. Adding CH3CO– to N is ethanoylation.
  • Identify an aromatic amine (e.g. phenylamine): make its N-substituted amide (a crystalline solid), recrystallise it, and match its melting point to data. Amides of small aliphatic amines, such as N-butylethanamide, are liquids, so this works best for aromatic amines.
Mission 1

Amides: make, split, dehydrate

What happens to an amide: make it, split it, dehydrate itCH3COO−NH4+ammonium ethanoateheat strongly, −H2OCH3CONH2ethanamideH2O + HClheatacid hydrolysisCH3COOH + NH4ClNaOHheatalkaline hydrolysisCH3COONa + NH3P4O10heatdehydrationCH3CN + H2O
  • From acids: RCOOH + NH3 → RCOO⁻NH4⁺; heat strongly → RCONH2 + H2O.
  • Acid hydrolysis, heat: CH3CONH2 + H2O + HCl → CH3COOH + NH4Cl
  • Alkaline hydrolysis, heat: CH3CONH2 + NaOH → CH3COONa + NH3 (turns damp red litmus blue).
  • Dehydration: heat with P4O10 (phosphorus(V) oxide): CH3CONH2 → CH3CN + H2O.
Mission check

?A reaction mixture contains phenylamine and some unreacted nitrobenzene, dissolved in an organic solvent. It is shaken with dilute hydrochloric acid in a separating funnel. Which compound moves into the water layer, and why?
Mission 2

Mission 2: How can a chemist make a molecule's carbon chain exactly one atom longer?

Make a guess: How can a chemist make a molecule's carbon chain exactly one atom longer?

Mission 2

Building the skeleton

Cyanide adds one carbon to a chainBeforeCC2 C chainCNnew C–C bondcyanide ionAfterCCCN3 C chain
  • Most organic reactions only swap functional groups. The carbon chain stays the same length.
  • To make a longer chain, you need a reaction that forms a new C–C bond.
  • The trick: a carbon nucleophile, a carbon atom with a lone pair or a δ− charge.
  • Cyanide, ⁻:C≡N, is the simplest: it adds one carbon.
Mission 2

Cyanide + halogenoalkane

Cyanide ion and bromoethane: nucleophilic substitutionNCCHH3CHBrδ+δ−12cyanide ionbromoethaneH3CCH2CN+Brpropanenitrile1C lone pair → δ+ C2C–Br bond → Br
  • Reagent: KCN in ethanol, heat under reflux.
  • CH3CH2Br + CN⁻ → CH3CH2CN + Br⁻
  • Product: propanenitrile. The chain grows from 2 C to 3 C.
  • Naming: count the C≡N carbon in the chain. CH3CH2CN is propanenitrile.
  • Mechanism: nucleophilic substitution. Lone pair on the C of CN⁻ attacks the δ+ C; the C–Br electrons go to Br.
  • KCN is highly toxic. Acid turns cyanide into HCN gas, so cyanide and acid only ever meet in a fume cupboard, in small amounts, under controlled conditions.
Mission 2

Cyanide + carbonyl

Cyanide adds to a carbonyl: ethanal to a hydroxynitrileHCN, with KCN to supply CN−Step 1NCCOHH3Cδ+δ−12cyanide ionethanalStep 2: protonation by HCNCOH3CHCNalkoxide ionHCN34HCNH3CCHCNOH2-hydroxypropanenitrile+NCregenerated
  • Aldehydes and ketones add cyanide across C=O: hydroxynitriles.
  • Reagent: HCN, with KCN to supply CN⁻.
  • CH3CHO → CH3CH(OH)CN, 2-hydroxypropanenitrile. Chain: 2 C → 3 C.
  • Mechanism: nucleophilic addition. Product is racemic when the new C is chiral.
  • Hazards: HCN is a very toxic gas, and cyanide salts are toxic too. Fume cupboard, gloves, small amounts.
Quick check
?1-Bromobutane is heated under reflux with potassium cyanide in ethanol. What is the organic product?
Mission 2

Nitrile → carboxylic acid

Propanenitrile: reduce to an amine or hydrolyse to an acidpropanenitrileH3CCH2CNreducelithal (LiAlH4)in dry etherCH3CH2CH2NH2propylaminehydrolysedilute HCl,refluxCH3CH2COOHpropanoic acid+ NH4Clhydrolyse with alkaliNaOH(aq), refluxCH3CH2COO− Na+ + NH3then dilute acid gives CH3CH2COOH
  • Acid hydrolysis: heat under reflux with dilute HCl.
  • CH3CH2CN + 2H2O + HCl → CH3CH2COOH + NH4Cl
  • The C≡N carbon becomes the –COOH carbon.
  • Alkaline hydrolysis: reflux with NaOH(aq). CH3CH2CN + NaOH + H2O → CH3CH2COONa + NH3
  • This gives the salt. Add dilute acid to release the carboxylic acid.
  • From a hydroxynitrile: CH3CH(OH)CN → CH3CH(OH)COOH, 2-hydroxypropanoic acid (lactic acid).
Mission 2

Nitrile → amine

Propanenitrile: reduce to an amine or hydrolyse to an acidpropanenitrileH3CCH2CNreducelithal (LiAlH4)in dry etherCH3CH2CH2NH2propylaminehydrolysedilute HCl,refluxCH3CH2COOHpropanoic acid+ NH4Clhydrolyse with alkaliNaOH(aq), refluxCH3CH2COO− Na+ + NH3then dilute acid gives CH3CH2COOH
  • Reduction with lithal (LiAlH4) in dry ether: CH3CH2CN + 4[H] → CH3CH2CH2NH2
  • Product: propylamine (propan-1-amine), one carbon longer than bromoethane.
  • Unlike ammonia + halogenoalkane, this gives only the primary amine: no further substitution.
Mission 2

Amides and nitriles

Ethanoic acid to ethanenitrile: the carbon count stays at twoH3CCOOHethanoicacid2 CH3CCOClethanoylchloride2 CH3CCONH2ethanamide2 CH3CCNethanenitrile2 CPCl5concentrated NH3P4O10, heat−H2OAnother route to the amideCH3COOH + NH3 → CH3COONH4heat: CH3COONH4 → CH3CONH2 + H2O
  • Acid → amide: make the acyl chloride (e.g. with PCl5), then add concentrated ammonia. CH3COCl + 2NH3 → CH3CONH2 + NH4Cl
  • Or make the ammonium salt with ammonia, then heat it: CH3COOH + NH3 → CH3COONH4; CH3COONH4 → CH3CONH2 + H2O
  • Amide → nitrile: heat with phosphorus(V) oxide, P4O10, which removes water. CH3CONH2 → CH3CN + H2O
  • This route keeps the same number of carbons. Cyanide + halogenoalkane adds one.
Quick check
?2-Hydroxypropanenitrile, CH3CH(OH)CN, is heated under reflux with dilute hydrochloric acid. What is the organic product?
Mission check

?Bromomethane, CH3Br, has one carbon. Which route turns it into ethylamine, CH3CH2NH2?
Mission 3

Mission 3: Benzene is as colourless as water. Why do two benzene rings joined by two nitrogen atoms make an orange solid?

Make a guess: Benzene is as colourless as water. Why do two benzene rings joined by two nitrogen atoms make an orange solid?

Mission 3

Making benzenediazonium chloride

DiazotisationNH2phenylamineNaNO2+ HClNNCl−benzenediazoniumchlorideice bathbelow 10 °C(about 0–5 °C)
  • Nitrous acid, HNO2, is unstable: make it in the flask from sodium nitrite and hydrochloric acid.
  • NaNO2 + HCl → HNO2 + NaCl
  • Phenylamine in HCl, kept below 10 °C (ice bath; in practice about 0–5 °C), reacts with it:
  • C6H5NH2 + HNO2 + HCl → C6H5N2⁺Cl⁻ + 2H2O
  • The product is benzenediazonium chloride. Its ion has the group –N⁺≡N on the ring.
Mission 3

Keep it cold

DecompositionN2 gas leavesabove 10 °CNNH2OwarmOH+ N2 + H+phenol
  • Above about 10 °C, the diazonium ion decomposes: nitrogen gas bubbles off and phenol forms.
  • C6H5N2⁺ + H2O → C6H5OH + N2 + H⁺
  • It survives when cold because the –N⁺≡N group is delocalised with the ring.
Quick check
?Benzenediazonium chloride is made and used below 10 °C. What happens if the solution warms up?
Mission 3

Coupling with phenol

Coupling with phenolNN+HO4coldin NaOH(aq)NNOHnew C–N bondtrans4-hydroxyazobenzeneyellow-orangeprecipitate
  • Dissolve phenol in NaOH(aq) and keep it cold.
  • Add cold benzenediazonium chloride: a yellow-orange solid forms at once.
  • The product is 4-hydroxyazobenzene: two rings joined by –N=N–, the azo group. (The parent compound, azobenzene, is an orange solid.)
  • C6H5N2⁺Cl⁻ + C6H5OH + NaOH → C6H5N=NC6H4OH + NaCl + H2O
  • The nitrogen is kept. The new bond is at the 4-position of the phenol ring, opposite the OH.
Mission 3

Coupling with phenylamine

  • Phenylamine couples the same way, in weakly acidic solution.
  • Product: 4-aminoazobenzene, a yellow dye.
  • C6H5N2⁺ + C6H5NH2 → C6H5N=NC6H4NH2 + H⁺
  • Both couplings are electrophilic substitutions: the diazonium ion is a weak electrophile.
  • It reacts only with rings activated by –OH (or –O⁻) or –NH2.
Quick check
?Cold benzenediazonium chloride is added to a cold solution of phenol in NaOH(aq). Which is the organic product?
Mission 3

Why azo compounds are coloured

Energy gapsbenzeneNNazo dyelargeΔEsmallerΔEabsorbs UVabsorbs visiblecolourlesscoloured
  • A substance is coloured if it absorbs some visible light: electrons move to a higher electronic level.
  • Benzene's gap between levels is large: it absorbs only ultraviolet, so it looks colourless.
  • Joining two rings through –N=N– gives one extended delocalised system.
  • More delocalisation → electronic levels closer together → smaller ΔE.
  • Smaller ΔE → longer wavelength absorbed (E = hc/λ), now in the visible.
  • The –N=N– group that brings this about is the chromophore.
Mission 3

The colour you see

Colour wheelviolet400–450 nmblue450–490 nmgreen490–560 nmyellow560–590 nmorange590–620 nmred620–750 nmopposite colours are complementary
  • You see the wavelengths that are not absorbed: the complementary colour.
  • Absorbs violet → looks yellow. Absorbs blue → looks orange. Absorbs green → looks red.
  • More extended delocalisation shifts absorption to longer wavelength: yellow → orange → red.
  • Groups like –OH and –NH2 on the rings extend the delocalisation further.
Quick check
?An azo dye absorbs most strongly at about 480 nm, in the blue part of the visible spectrum. What colour does its solution appear in white light?
Mission 3

Indicators

  • Methyl orange is an azo dye.
  • In acid it gains H⁺. That changes the extent of delocalisation and the gap between levels.
  • Acid form absorbs a longer wavelength → red. Alkaline form → yellow.
  • Any change in delocalisation changes the colour.
Quick check
?Which reagents and conditions, in two steps, convert phenylamine into the yellow-orange azo dye 4-hydroxyazobenzene?
Mission check

?Benzenediazonium chloride couples with phenol to give a yellow-orange dye. With naphthalen-2-ol (two fused rings) it gives an orange-red dye. Why is the second dye redder?
Mission 4

Mission 4: Why do chemists plan the route to a new molecule by starting from the finished product?

Make a guess: Why do chemists plan the route to a new molecule by starting from the finished product?

Mission 4

Work backwards

Work backwards, then write the route forwardswork back from the targetstartingmaterialinter-mediateinter-mediatetargetthen write it forwardsstartingmaterialinter-mediateinter-mediatetargetstep 1step 2step 3reagents and conditions for every step
  • Start from the target. Name its functional groups and count its carbons.
  • Ask: which one known reaction makes this group? That gives the compound one step back.
  • Repeat until you reach the starting material you were given.
  • Carbon count goes up? You need a C–C bond-forming step (see Mission 2).
  • Then write the route forwards, with reagents and conditions for every step.
Mission 4

Your reaction map

Reaction map (CCEA)alkenehalogenoalkanealcoholaminealdehyde /ketonenitrilehydroxynitrilecarboxylicacidesterHBrKOH inethanolsteam, H+NaOH(aq)NH3KCN inethanol+1 Cdichromate, H+LiAlH4cyanide+1 Cdichromate, H+refluxLiAlH4dry etherdilute HCl,reflux+ alcohol,acid catalystpurple: new C–C bondprimary alcohol → aldehyde: distil
  • Alkene → halogenoalkane (HBr) · → alcohol (steam, acid catalyst).
  • Halogenoalkane → alcohol (NaOH(aq)) · → amine (NH3) · → nitrile (KCN, +1 C) · → alkene (KOH in ethanol).
  • Primary alcohol → aldehyde → carboxylic acid (oxidation). Secondary alcohol → ketone. Acid + alcohol → ester.
  • Aldehyde or ketone → hydroxynitrile (cyanide, +1 C) · → alcohol (reduction).
  • Nitrile → amine (reduction).
  • Nitrile → carboxylic acid (hydrolysis).
Mission 4

Worked example: three steps

Three-step route from ethene to propylamineHBr,room temperatureKCN in ethanol,reflux (+1 C)LiAlH4 indry etheretheneCH2=CH22 CbromoethaneCH3CH2Br2 CpropanenitrileCH3CH2CN3 CpropylamineCH3CH2CH2NH23 C+1
  • Target: propylamine, CH3CH2CH2NH2 (3 C). Start: ethene (2 C).
  • Back 1: an amine from a nitrile by reduction → propanenitrile, CH3CH2CN.
  • Back 2: a nitrile from a halogenoalkane, adding 1 C → bromoethane, CH3CH2Br.
  • Back 3: bromoethane from ethene + HBr. Reached the start.
  • Forwards: (1) HBr, room temperature. (2) KCN in ethanol, reflux. (3) Reduce the nitrile.
  • Step 3 reagent: LiAlH4 in dry ether.
Quick check
?Which compound reacts with KCN in ethanol to give butanenitrile, CH3CH2CH2CN?
Mission 4

Nitriles in routes

Two nitrile routes, with carbon countsadds one carbonkeeps the carbonsbromoethane2propanenitrile3propanoic acid3propylamine3ethanoic acid2ethanoyl chloride2ethanamide2ethanenitrile2ethylamine2KCNhydrolyseLiAlH4PCl5NH3phosphorus(V) oxideP4O10, heatLiAlH4number in the circle = carbon atoms
  • Adding a carbon: bromoethane → (KCN) propanenitrile → (hydrolyse) propanoic acid, or → (LiAlH4) propylamine.
  • Keeping the carbons: ethanoic acid → (PCl5) ethanoyl chloride → (NH3) ethanamide → (P4O10, heat) ethanenitrile → (LiAlH4) ethylamine.
  • Count carbons at every step: they only change at a C–C step.
Quick check
?Ethanamide, CH3CONH2, is heated with phosphorus(V) oxide. The organic product is then reduced with LiAlH4. What is the final product?
Mission check

?A chemist needs 2-hydroxybutanenitrile, CH3CH2CH(OH)CN, and has propan-1-ol, CH3CH2CH2OH. Which two-step plan works?
Recap

The big ideas

Mission 1

  • Amines: the N lone pair makes them bases (salts with acids, freed by alkali) and nucleophiles.
  • Make them: halogenoalkane + excess NH3; nitrile reduction; nitroarene + Sn / conc. HCl, then NaOH.
  • Base strength: aliphatic amine > NH3 > phenylamine (lone-pair availability).
  • Amines + acyl chlorides → N-substituted amides.

Mission 2

  • CN⁻ adds one carbon: with halogenoalkanes (substitution) or carbonyls (addition).
  • Nitriles can be reduced to amines.
  • Nitriles can be hydrolysed to carboxylic acids.

Mission 3

  • Phenylamine + HNO2 (NaNO2 + HCl) below 10 °C → benzenediazonium chloride. Warm: phenol + N2.
  • Couple with phenol (alkaline) or phenylamine → azo dye, –N=N– between two rings.
  • Extended delocalisation → smaller ΔE → visible light absorbed → complementary colour seen.
  • Indicators like methyl orange change colour as H⁺ changes the delocalisation.

Mission 4

  • Work backwards from the target, one known reaction per step; count carbons to spot a C–C step.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Amines for CCEA A-level Chemistry. 🎉

  1. Mission 1Fish smells fishy because of amines. Why does a squeeze of lemon juice take the smell away?
  2. Mission 2How can a chemist make a molecule's carbon chain exactly one atom longer?
  3. Mission 3Benzene is as colourless as water. Why do two benzene rings joined by two nitrogen atoms make an orange solid?
  4. Mission 4Why do chemists plan the route to a new molecule by starting from the finished product?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to A-Level Chemistry · CCEA