← A-Level Chemistry · AQA · A-Level Chemistry revision
⭐ 0
AQA A-level Chemistry (7405) · 3.3.12 Polymers (A-level only)
Mini-Lesson

Polymers

1 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1Why does making a polyester give off water, when making some other plastics loses no atoms at all?
Mission 1

Mission 1: Why does making a polyester give off water, when making some other plastics loses no atoms at all?

Make a guess: Why does making a polyester give off water, when making some other plastics loses no atoms at all?

Mission 1

Two ways to build a polymer

Addition and condensation polymerisation comparedAddition: no atoms lostCH2CH2CH2CH2CH2CH2CH2CH2one long chain · nothing else formsCondensation: H2O lost at each linkdioldiaciddioldiaciddiolH2OdiacidH2OdiolH2Odiacid4 blocks · 3 links · 3 H2O
  • Addition polymerisation: monomers with a C=C join up. The polymer is the only product: no atoms lost.
  • Condensation polymerisation: each monomer has two functional groups. Two groups react to make a link.
  • Every link releases a small molecule: usually H2O.
  • With an acyl chloride as monomer, the small molecule is HCl.
  • So a condensation polymer has fewer atoms than the monomers it came from.
Mission 1

Making a polyester

Forming an ester link in PETDiol + diacid (1,4)HOCH2CH2OHHOCOCOOHester link + H2OHOCH2CH2OCOCOOHester linkHOH
  • Diol + dicarboxylic acid → polyester + water.
  • –OH reacts with –COOH: an ester link, –COO–, plus H2O.
  • Each monomer has a group at both ends, so the chain grows in both directions.
  • Example: ethane-1,2-diol + benzene-1,4-dicarboxylic acid → PET.
  • PET is sold as Terylene for fibres.
  • Uses: drinks bottles, food packaging, clothing fibres.
Mission 1

Drawing the repeat unit

Three steps to the repeat unit of PET1Monomers end to endHOCH2CH2OHHOCOCOOH2Remove H and OHHOCH2CH2OHHOCOCOOH2 H2O removed3Join · brackets · nOCH2CH2OCOCOnone residue of each monomer
  • Draw the two monomers end to end.
  • Remove H from each –OH and OH from each –COOH.
  • Join the fragments with ester links. Add open bonds at both ends, brackets and n.
  • The repeat unit holds one residue of each monomer: two links, two H2O.
  • PET: –[–OCH2CH2OOC–C6H4–CO–]n–
Quick check
?Ethane-1,2-diol, HOCH2CH2OH, and hexanedioic acid, HOOC(CH2)4COOH, react to form a polyester. Which option gives the repeat unit and describes it correctly?
Mission 1

Polyamides

Amide link and nylon 6,6Diamine + diacidH2N(CH2)6NH2HOCO(CH2)4COOH6 C6 C+ 2H2O per unitRepeat unitNH(CH2)6NHCO(CH2)4COnamide linkKevlar repeat unitNHNHCOCOnboth rings: 1,4 (para)
  • Diamine + dicarboxylic acid → polyamide + water.
  • –NH2 reacts with –COOH: an amide link, –CONH–, plus H2O.
  • Nylon 6,6: hexane-1,6-diamine + hexanedioic acid → –[–NH(CH2)6NHCO(CH2)4CO–]n–
  • Uses of nylon: ropes, clothing, carpets.
  • Kevlar: benzene-1,4-diamine + benzene-1,4-dicarboxylic acid. Very strong: bulletproof vests, cut-resistant gloves.
  • A dicarbonyl dichloride (ClOC–R–COCl) reacts faster, releasing HCl instead of H2O.
Mission 1

Amino acids make polyamides too

  • An amino acid has –NH2 and –COOH on the same molecule.
  • So one kind of monomer is enough: –NH2 of one reacts with –COOH of the next.
  • The link is an amide link. In proteins it is called a peptide link.
  • Repeat unit for one amino acid, H2NCH(R)COOH: –[–NHCH(R)CO–]n–
  • Chains of many amino acids are polypeptides; proteins are polypeptides.
Quick check
?Hexane-1,6-diamine, H2N(CH2)6NH2, and decanedioic acid, HOOC(CH2)8COOH, react to form the polyamide nylon 6,10. Which option gives the repeat unit and describes it correctly?
Mission 1

Working backwards: chain → monomers

Polyester chain back to its monomersCut each C–O ester bondCOCOOCH2CH2OCOCOcutcut+ H2O at each cutMonomersHOCOCOOHHOCH2CH2OHdiaciddiol
  • Find the links in the chain: –COO– (ester) or –CONH– (amide).
  • Break each link at the C–O or C–N single bond.
  • Add OH back to the C=O carbon; add H back to the O or N.
  • Diacid + diol, or diacid + diamine, or one amino acid: read off the monomers.
Mission 1

Forces between the chains

Forces between polymer chainsNylon: hydrogen bondsNHCOCONHNHCOCONHNHCOCONHδ+δ−N–H···O=C between chainsPolyester: no N–H or O–HCOOCOOCOOCOOCOOCOOδ+δ−δ+δ−dipole–dipole, not H bondsKevlar sheet: many H bonds
  • Polyamides: hydrogen bonds between N–H on one chain and C=O on the next.
  • Kevlar's flat, rigid chains line up in sheets, held by many hydrogen bonds: very strong fibres.
  • Polyesters: no N–H or O–H in the chain, so no hydrogen bonds between chains.
  • Polyester chains attract by permanent dipole–dipole forces between polar C=O groups, plus London forces.
  • Polyalkenes (non-polar) have only London forces between chains.
Mission 1

Hydrolysis breaks the links

  • Water reacts with each ester or amide link: the reverse of condensation.
  • Hot acid or hot alkali speeds it up.
  • Polyester + acid → diol + dicarboxylic acid.
  • Polyester + NaOH → diol + dicarboxylate salt (–COO⁻Na⁺).
  • Polyamide + acid → dicarboxylic acid + diammonium salt (–NH3⁺Cl⁻ with HCl).
  • Polyamide + NaOH → diamine + dicarboxylate salt.
Mission 1

Biodegradable or inert?

Why polyesters hydrolyse and polyalkenes do notPolyester: polar linkCOOδ+δ−H2O / OH−attack herePolyalkene: no polar siteonly C–C and C–H: non-polarnothing for H2O / OH− to attack
  • Polyalkenes: only C–C and C–H bonds. Non-polar, so nothing attracts water or OH⁻: chemically inert, non-biodegradable.
  • Polyesters and polyamides: the C=O carbon is δ+. Water and OH⁻ can attack it.
  • So they can be hydrolysed, slowly, by water and microorganisms: biodegradable.
  • Explaining it: polar bonds in the link give a site for nucleophilic attack; polyalkenes have none.
Mission 1

Getting rid of polymers

  • Landfill: cheap and easy. But uses land, lasts for centuries, can leak harmful substances.
  • Incineration: saves landfill space; heat can generate electricity. But makes CO2; burning PVC gives toxic HCl, which must be removed.
  • Recycling: saves raw materials (crude oil) and energy. But plastics must be collected and sorted, which is costly, and quality can fall each cycle.
  • Mechanical recycling melts and remoulds; feedstock recycling breaks polymers back into monomers or small molecules.
  • Hydrolysable polymers like PET can be broken back to their monomers and repolymerised.
Quick check
?A sample of nylon 6,6, made from hexane-1,6-diamine and hexanedioic acid, is boiled with excess sodium hydroxide solution until it is fully hydrolysed. Which pair of products forms?
Mission check

?Lactic acid, CH3CH(OH)COOH, is made from plant sugars. Its molecules join into poly(lactic acid), PLA, used for compostable cups. Which statement describes how PLA forms?
Recap

The big ideas

Mission 1

  • Addition: C=C monomers, no atoms lost. Condensation: two groups react at each link, losing H2O (or HCl).
  • Polyester: –COO– links from diol + diacid. Polyamide: –CONH– links from diamine + diacid, or from amino acids.
  • Ester and amide links can be hydrolysed; polyalkenes can't.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Polymers for AQA A-level Chemistry. 🎉

  1. Mission 1Why does making a polyester give off water, when making some other plastics loses no atoms at all?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to A-Level Chemistry · AQA