← A-Level Chemistry · AQA · A-Level Chemistry revision
⭐ 0
AQA A-level Chemistry (7405) · 3.3.3 Halogenoalkanes
Mini-Lesson

Halogenoalkanes

3 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1How does warm sodium hydroxide turn a bromoalkane into an alcohol?
  2. Mission 2Why does hydroxide turn a bromoalkane into an alcohol in water, but into a gas in ethanol?
  3. Mission 3Spray-can gases that are safe to breathe thinned the ozone layer. How can a little gas destroy so much ozone?
Mission 1

Mission 1: How does warm sodium hydroxide turn a bromoalkane into an alcohol?

Make a guess: How does warm sodium hydroxide turn a bromoalkane into an alcohol?

Mission 1

Halogenoalkanes

Polar C-Br bond and the three classes of bromoalkanePolar C–Br bondCCBrHHHHHδ+δ−bromoethaneRing = the carbon bonded to BrBr1-bromopropane1 C attached · primary (1°)Br2-bromopropane2 C attached · secondary (2°)Br2-bromo-2-methylpropane3 C attached · tertiary (3°)
  • Halogen X is more electronegative than carbon: the C–X bond is polar, Cδ+–Xδ−.
  • The δ+ carbon can be attacked by electron-rich species.
  • Classify by the carbon bonded to X: bonded to 1, 2 or 3 other carbons.
  • Primary: CH3CH2CH2Br · secondary: CH3CHBrCH3 · tertiary: (CH3)3CBr.
Mission 1

Nucleophiles

  • A nucleophile is an electron-pair donor.
  • It donates both electrons of a new covalent bond, usually from a lone pair.
  • Examples: OH⁻, CN⁻, NH3, H2O. No charge needed: NH3 and H2O are neutral.
  • "Nucleus-loving": it is attracted to a δ+ atom.
Quick check
?Which set contains only species that can act as nucleophiles?
Mission 1

Heterolytic fission and curly arrows

Heterolytic fission of the C-Br bond in bromoethaneHeterolytic fissionH3CCBrHHδ+δ−both bonding electronsgo to BrH3CCHH+Br
  • Heterolytic fission: both bonding electrons go to one atom, so ions form.
  • The more electronegative atom takes the pair and becomes negative: C–Br → C⁺ + Br⁻.
  • A curly arrow (two barbs) shows an electron pair moving.
  • Forming a bond: arrow from a lone pair (or a bond) to the atom it bonds to.
  • Breaking a bond: arrow from the bond to the atom that takes the pair.
Mission 1

The mechanism, step by step

Nucleophilic substitution: hydroxide ions and bromoethane, step by stepHOCHH3CHBrδ+δ−231CH3CH2OH+Br1dipole2lone pair on O → δ+ C3C–Br bond → Br
  • Bromoethane + warm aqueous NaOH (or KOH): CH3CH2Br + OH⁻ → CH3CH2OH + Br⁻
  • 1 Draw the dipole: Cδ+–Brδ−.
  • 2 Arrow from a lone pair on O of OH⁻ to the δ+ C: the new C–O bond.
  • 3 Arrow from the C–Br bond to Br: Br leaves as Br⁻, taking the pair.
  • Products: ethanol and bromide ion.
  • Name: nucleophilic substitution. With OH⁻ it is also called hydrolysis.
Quick check
?Hydroxide ions react with 1-chloropropane: CH3CH2CH2Cl + OH⁻ → CH3CH2CH2OH + Cl⁻. Which describes the curly arrows correctly?
Mission 1

Which reacts fastest? Bond enthalpy

Carbon-halogen bond enthalpies and the rate of hydrolysisbond enthalpy / kJ mol−10100200300400500467C–F346C–Cl290C–Br228C–Irate of hydrolysis increasespolarity increases:not the controlling factor
  • The C–X bond must break, so its strength controls the rate.
  • Bond enthalpies: C–F 467 · C–Cl 346 · C–Br 290 · C–I 228 kJ mol⁻¹.
  • Rate: iodo > bromo > chloro (fluoro hardly reacts).
  • Polarity predicts the opposite order (C–F most polar), so bond enthalpy wins.
Mission 1

Comparing rates with silver nitrate

Silver nitrate test: three tubes of halogenoalkane in a 50 degree water bathAgNO3(aq) in ethanolwater bath at 50 °Cchlorobromoiodo3white2cream1yellownumber = order of appearance
  • Add the halogenoalkane to aqueous silver nitrate in ethanol (ethanol dissolves both). Warm all tubes equally, e.g. 50 °C water bath.
  • Water is the nucleophile: R–X + H2O → R–OH + H⁺ + X⁻
  • X⁻ meets Ag⁺: Ag⁺(aq) + X⁻(aq) → AgX(s). Time how long until the precipitate appears.
  • Precipitates: AgI yellow (first) · AgBr cream · AgCl white (last).
Quick check
?1-chlorobutane, 1-bromobutane and 1-iodobutane are each added to aqueous silver nitrate in ethanol at 50 °C. Which tube shows a precipitate first, and what colour is it?
Mission 1

Cyanide: a longer chain

  • Reagent: KCN in ethanol (with a little water), heat under reflux.
  • CH3CH2Br + CN⁻ → CH3CH2CN + Br⁻. Product: propanenitrile.
  • Arrow from the lone pair on C of CN⁻ to the δ+ carbon; arrow from C–Br to Br.
  • A nitrile forms, and the carbon chain grows by one.
  • KCN is very toxic.
Mission 1

Ammonia: making amines

Ammonia and bromoethane: making an amine in two stepsStep 1H3NCHH3CHBrδ+δ−CH3CH2NH3++BrStep 2: a second NH3 takes H+CH3CH2NHHHNH3CH3CH2NH2 + NH4+ + Br−
  • Reagent: excess ammonia in ethanol, heated in a sealed tube (under pressure).
  • Step 1: lone pair on N of NH3 → δ+ C; C–Br → Br. Forms CH3CH2NH3⁺ + Br⁻.
  • Step 2: a second NH3 removes H⁺ from N: lone pair on N → H; N–H bond → N.
  • Overall: CH3CH2Br + 2NH3 → CH3CH2NH2 + NH4Br. Product: ethylamine, a primary amine.
  • The amine has a lone pair too, so it can attack again: secondary → tertiary amines.
  • Finally a quaternary ammonium salt, e.g. (CH3CH2)4N⁺Br⁻. Excess NH3 makes the primary amine the main product.
Quick check
?Bromoethane is heated with excess ammonia in ethanol: CH3CH2Br + 2NH3 → CH3CH2NH2 + NH4Br. What does the second NH3 molecule do?
Mission 1

Substitution or elimination?

  • OH⁻ can act as a nucleophile (attacks C) or as a base (removes H⁺).
  • Aqueous, warm → mainly substitution: an alcohol.
  • Ethanolic, hot → mainly elimination: an alkene.
  • 2-bromopropane + KOH gives both propan-2-ol and propene: the two reactions happen at the same time.
  • Elimination mechanism: Mission 2.
Mission check

?Iodoethane, CH3CH2I, is warmed with aqueous sodium hydroxide, and ethanol forms. Which statement about the electron pairs is correct?
Mission 2

Mission 2: Why does hydroxide turn a bromoalkane into an alcohol in water, but into a gas in ethanol?

Make a guess: Why does hydroxide turn a bromoalkane into an alcohol in water, but into a gas in ethanol?

Mission 2

One ion, two jobs

One ion, two jobs2-bromopropaneBrHHHδ+δ−OHnucleophile:substitutionbase:elimination
  • OH⁻ has lone pairs on its O. It can donate one to two different places.
  • To a δ+ carbon: OH⁻ acts as a nucleophile → substitution (see Mission 1).
  • To an H on the carbon next to the C–Br carbon: OH⁻ acts as a base (it accepts H⁺) → elimination.
  • Same reagent, same compound. Conditions decide which job wins.
Quick check
?2-bromopropane is heated under reflux with potassium hydroxide dissolved in ethanol, and propene forms. What is the role of the hydroxide ion?
Mission 2

Elimination

Elimination: HBr removed2-bromopropane + OH−BrH123+ OH−HBr removed+ H2O + Br−propene, CH2=CHCH3K+ is a spectator ion: not shown
  • Elimination: a small molecule is removed from two neighbouring carbons, leaving a C=C.
  • Here HBr is removed: H from one carbon, Br from the next.
  • CH3CHBrCH3 + KOH → CH2=CHCH3 + KBr + H2O
  • 2-bromopropane → propene, a gas.
Mission 2

Conditions decide

Conditions decideaqueous KOHwarmethanolic KOHrefluxpropan-2-ol (substitution)propene (elimination)primarytertiarymore substitutionmore elimination
  • Both reactions happen at the same time (concurrently). Conditions change the proportions.
  • Aqueous KOH, warm → mainly substitution → alcohol.
  • Ethanolic KOH, hot (reflux) → mainly elimination → alkene.
  • Elimination is also favoured by tertiary halogenoalkanes; substitution by primary.
  • So 2-bromopropane with KOH gives both propan-2-ol and propene.
Quick check
?A chemist wants as much propene, and as little propan-2-ol, as possible from 2-bromopropane. Which conditions should be used?
Mission 2

The two mechanisms

Mechanisms: elimination and substitutionElimination: OH− acts as a baseCH2CHCH3HBrδ+δ−OH123→ propene + H2O + Br−Substitution: OH− acts as a nucleophileCHCH3CH3Brδ+δ−OH12→ propan-2-ol + Br−
  • Elimination, one step, three curly arrows:
  • Arrow 1: from a lone pair on O of OH⁻ to an H on the carbon next to the C–Br carbon.
  • Arrow 2: from that C–H bond to the C–C bond, forming the C=C.
  • Arrow 3: from the C–Br bond to Br, which leaves as Br⁻.
  • Substitution (see Mission 1): arrow from a lone pair on O to the Cδ+; arrow from the C–Br bond to Br.
  • Show δ+ on C and δ− on Br in both.
Quick check
?In the mechanism for the elimination of HBr from 2-bromopropane by hydroxide ions, where does the first curly arrow start and finish?
Mission 2

Symmetrical or not?

Which hydrogen?2-bromobutaneBrHHHHH1234H on C1H on C3H from C1but-1-eneH from C3E-but-2-eneZ-but-2-ene
  • H can be removed from any carbon next to the C–X carbon.
  • Symmetrical: 2-bromopropane. Both neighbours are CH3, so one alkene: propene.
  • Unsymmetrical: 2-bromobutane, CH3CHBrCH2CH3.
  • H from C1 → but-1-ene. H from C3 → but-2-ene, as E and Z isomers.
  • So unsymmetrical halogenoalkanes give a mixture of alkenes.
Quick check
?2-bromo-2-methylbutane, (CH3)2CBrCH2CH3, is heated with ethanolic potassium hydroxide. How many different alkenes can form?
Mission check

?Chlorocyclohexane is warmed with aqueous sodium hydroxide in one tube, and heated under reflux with sodium hydroxide in ethanol in another. The main product in the second tube is cyclohexene. Which statement explains the second result?
Mission 3

Mission 3: Spray-can gases that are safe to breathe thinned the ozone layer. How can a little gas destroy so much ozone?

Make a guess: Spray-can gases that are safe to breathe thinned the ozone layer. How can a little gas destroy so much ozone?

Mission 3

Ozone: the UV shield

The ozone layer shields the ground from UVUV from the SunO3O3O3normal layerless UVO3thinner layermore UV35 km15 kmstratosphereozonelayertroposphereground
  • Ozone, O3, forms naturally in the upper atmosphere (stratosphere).
  • UV splits O2: O2 → 2O. Then O + O2 → O3.
  • Ozone absorbs UV radiation: O3 → O2 + O. The UV is used up, not passed on.
  • Less ozone → more harmful UV reaches the surface → more skin cancer, cataracts and crop damage.
Mission 3

CFCs: why chemists loved them

  • CFCs: chlorofluorocarbons, e.g. CCl2F2 (also written CF2Cl2) and CCl3F.
  • Non-toxic, non-flammable, very unreactive, easily liquefied.
  • Used as refrigerants, aerosol propellants, solvents and for blowing foam.
Mission 3

What happens high up

  • CFCs are so unreactive that they last for decades and slowly diffuse up to the stratosphere.
  • There, high-energy UV breaks the weakest bond: C–Cl.
  • Bond enthalpies: C–F 467 · C–H 413 · C–Cl 346 kJ mol⁻¹.
  • Homolytic fission makes chlorine radicals: CCl2F2 → CClF2• + Cl•
Quick check
?In the stratosphere, UV radiation breaks one bond in CCl2F2. Which bond breaks, and why?
Mission 3

The catalytic cycle

Catalytic cycle: chlorine destroys ozoneCCl2F2 + UVCClF2•Cl•ClO•O3O2O32O212
  • Step 1: Cl• + O3 → ClO• + O2
  • Step 2: ClO• + O3 → 2O2 + Cl• · Overall: 2O3 → 3O2
  • Cl• is used in step 1 and regenerated in step 2: it is a catalyst.
  • Each Cl• goes round the cycle many thousands of times before it is removed.
  • That's how a little CFC destroys a lot of ozone.
Quick check
?Why are chlorine radicals described as a catalyst in the breakdown of ozone?
Mission 3

Evidence, a ban and replacements

  • 1974: chemists (Molina and Rowland) predicted that Cl atoms from CFCs would destroy stratospheric ozone.
  • 1985: British scientists measured a large springtime ozone loss over Antarctica (the "ozone hole"). Satellite data confirmed it.
  • Aircraft measurements found high ClO where ozone was low.
  • Evidence from independent groups agreed, so governments acted.
  • The Montreal Protocol (1987) and its later tightening phased out CFCs.
  • Replacements contain no chlorine: HFCs (e.g. CH2FCF3) and hydrocarbons (e.g. 2-methylpropane in fridges).
  • The ozone layer is now slowly recovering.
Quick check
?HFC-134a, CH2FCF3, replaced CFCs in fridges. Why doesn't it damage the ozone layer?
Mission check

?Halon 1301, CBrF3, was used in fire extinguishers. Like CFCs, it reaches the stratosphere. Why can a small amount of halon destroy a large amount of ozone?
Recap

The big ideas

Mission 1

  • Nucleophiles donate an electron pair to the δ+ carbon; the halogen leaves as X⁻ (heterolytic fission).
  • Curly arrows: from lone pair to C; from C–X bond to X.
  • Rate: C–I fastest, C–Cl slowest: bond enthalpy, not polarity.
  • CN⁻ gives nitriles (chain + 1 C); excess NH3 gives primary amines.

Mission 2

  • OH⁻ is a nucleophile (substitution → alcohol) or a base (elimination → alkene).
  • Ethanolic KOH, hot → elimination of HX; unsymmetrical halogenoalkanes give a mixture of alkenes.

Mission 3

  • Ozone absorbs UV. UV breaks the C–Cl bond in CFCs, releasing chlorine atoms.
  • Each Cl atom is regenerated, so it catalyses the breakdown of many ozone molecules.
  • Cl• + O3 → ClO• + O2; then ClO• gives back Cl•.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Halogenoalkanes for AQA A-level Chemistry. 🎉

  1. Mission 1How does warm sodium hydroxide turn a bromoalkane into an alcohol?
  2. Mission 2Why does hydroxide turn a bromoalkane into an alcohol in water, but into a gas in ethanol?
  3. Mission 3Spray-can gases that are safe to breathe thinned the ozone layer. How can a little gas destroy so much ozone?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to A-Level Chemistry · AQA