← A-Level Chemistry · AQA · A-Level Chemistry revision
⭐ 0
AQA A-level Chemistry (7405) · 3.3.16 Chromatography (A-level only)
Mini-Lesson

Chromatography

1 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1Why do the dyes in one drop of ink travel different distances up the same strip of paper?
Mission 1

Mission 1: Why do the dyes in one drop of ink travel different distances up the same strip of paper?

Make a guess: Why do the dyes in one drop of ink travel different distances up the same strip of paper?

Mission 1

Two phases

Mobile and stationary phasesstationary phasemobile phasemostly heldmostly carriedfurther
  • Chromatography separates the components of a mixture between two phases.
  • Mobile phase: moves (a liquid solvent, or a gas).
  • Stationary phase: stays put (paper, a coated plate, a packed column).
  • Each component keeps switching: dissolved in the mobile phase ↔ held by the stationary phase.
  • More time in the mobile phase → it moves further (or comes out sooner).
  • Separation depends on the balance between solubility in the moving phase and retention by the stationary phase.
Mission 1

Running a TLC or paper chromatogram

TLC set-up and developed platesolventoriginlidoriginsolventfront
  • Draw the origin line in pencil (ink would itself separate).
  • Spot the mixture and reference samples on the line; let the spots dry.
  • Stand the plate in solvent below the origin (or the spots dissolve away into the solvent).
  • Cover the tank: the air inside stays saturated with solvent vapour.
  • Remove before the solvent reaches the top; mark the solvent front at once.
  • Colourless spots: view under UV light (plates with a fluorescent coating), or use iodine vapour or a locating spray.
  • Safety: solvents are often flammable and harmful: no flames, use a fume cupboard; never look into the UV lamp.
Mission 1

Why some components move less

Why polar molecules are held by silicasolventsurface with –OH groupsOHOHOHOHCH3CH2OHH-bondpolar: heldnon-polar: carried
  • Silica (TLC) and paper both have many polar –OH groups on their surface (paper: cellulose, with water held on it).
  • Polar components are held strongly (dipole–dipole forces, hydrogen bonds): they move less.
  • Less polar components spend more time in a less polar solvent: they move further.
  • So the order of spots tells you the relative polarity of the components.
  • Mass is not the main cause: a small polar molecule can stay behind a large non-polar one.
Quick check
?The dyes in a black ink are separated by paper chromatography. Which difference between the dyes is mainly responsible for the separation?
Mission 1

Rf values

TLC set-up and developed platesolventoriginlidoriginsolventfront2.9 cm7.6 cm
  • Rf = distance moved by the spot ÷ distance moved by the solvent front, both from the origin.
  • Measure to the centre of the spot.
  • Rf has no units and lies between 0 and 1.
  • Example: spot 2.9 cm, solvent front 7.6 cm: Rf = 2.9 ÷ 7.6 = 0.38.
  • Rf depends on the solvent, the plate and the temperature: compare with standards run on the same plate.
Quick check
?On a TLC plate, the solvent front is 6.4 cm above the origin line, which is 1.0 cm above the bottom edge of the plate. The centre of spot S is 4.8 cm above the origin; its top edge is 5.1 cm above the origin. What is the Rf value of S?
Mission 1

Amino acids by TLC

  • Hydrolyse the protein or peptide: this breaks the peptide links into amino acids.
  • Run TLC with the hydrolysate and known amino acids side by side.
  • Amino acids are colourless: locate them with ninhydrin spray (purple spots on warming) or UV light.
  • Identify each amino acid by its Rf, compared with the standards.
  • Ninhydrin is harmful and an irritant (and the spray solvent is often flammable): spray in a fume cupboard, wear gloves.
Mission 1

Chromatography in a column

Column methodsColumn chromatographysolvent addedat the topsilica packingbands movedownfractions collectedGas chromatography (GC)carriergasinjectorheated ovendetectorrecorder
  • Column chromatography: solvent moves down a column packed with a solid (e.g. silica); components come out (elute) at different times; collect them in separate flasks.
  • Gas chromatography (GC): an unreactive carrier gas (the mobile phase) pushes the vaporised sample through a long, heated column.
  • Stationary phase: a solid, or (usually) a high-boiling liquid coated on a solid support or on the column wall.
  • Retention time: time from injecting the sample to the component reaching the detector.
Mission 1

Reading a gas chromatogram

Gas chromatogram0123456detector signaltime / min1.42.74.3illustrative
  • Each peak = one component. Same retention time as a standard (same conditions) → likely the same substance.
  • Retention time depends on column temperature, gas flow rate and the stationary phase: keep them the same.
Mission 1

GC–MS: separate, then identify

GC–MS: separate, then identifyGCseparatesretention timeeach peakenters the MSmassspectrometeridentifiesabundancem/zmatch to a databaseof known spectra
  • GC separates the mixture; each component flows straight into a mass spectrometer.
  • Its mass spectrum (M⁺ and fragments) is matched to a database of known spectra.
  • Retention time + mass spectrum: a much more certain identification than either alone.
Mission check

?A student runs TLC of a mixture of two polar compounds on a silica plate, using hexane as the solvent. Both spots barely leave the origin. Which change is most likely to make the spots move further up the plate and separate?
Recap

The big ideas

Mission 1

  • Components separate because each is attracted differently to the stationary phase and the mobile phase.
  • Rf = spot distance ÷ solvent-front distance; retention time identifies GC peaks; compare with standards under the same conditions.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Chromatography for AQA A-level Chemistry. 🎉

  1. Mission 1Why do the dyes in one drop of ink travel different distances up the same strip of paper?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to A-Level Chemistry · AQA