← A-Level Chemistry · AQA · A-Level Chemistry revision
⭐ 0
AQA A-level Chemistry (7405) · 3.3.9 Carboxylic acids and derivatives (A-level only)
Mini-Lesson

Carboxylic acids and derivatives

3 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1Swap one hydrogen for a carbon chain: why does a sour acid become a sweet-smelling liquid?
  2. Mission 2How can boiling cooking fat with an alkali turn it into soap?
  3. Mission 3Why does ethanoyl chloride fume in moist air, when ethanoic acid just sits in the bottle?
Mission 1

Mission 1: Swap one hydrogen for a carbon chain: why does a sour acid become a sweet-smelling liquid?

Make a guess: Swap one hydrogen for a carbon chain: why does a sour acid become a sweet-smelling liquid?

Mission 1

Acids and esters: the structures

Acid and estercarboxylic acidCH3OOHethanoic acidesterCH3OOCH3methyl ethanoateethanoatemethylfrom ethanoic acidfrom methanol
  • Carboxylic acid: –COOH. Ethanoic acid, CH3COOH.
  • Ester: –COO– with a carbon on both sides. RCOOR′.
  • An ester is an acid with the O–H hydrogen replaced by an alkyl group.
  • Name: alkyl (from the alcohol) + -oate (from the acid).
  • Methyl ethanoate, CH3COOCH3. Ethyl propanoate, CH3CH2COOCH2CH3.
Mission 1

Weak acids that still make salts

  • CH3COOH ⇌ CH3COO⁻ + H⁺: only partly dissociates. A weak acid.
  • Alkali: CH3COOH + NaOH → CH3COONa + H2O
  • Carbonate: 2CH3COOH + Na2CO3 → 2CH3COONa + CO2 + H2O
  • Salts are named -oate: sodium ethanoate.
Mission 1

The carbonate test

Carbonate test for a carboxylic acidethanoic acid+ Na2CO3fizzeslimewaterturns milkyCO2
  • Add sodium carbonate: effervescence.
  • The gas turns limewater milky: CO2.
  • Alcohols, aldehydes, ketones and esters: no fizzing.
  • Required practical 6: this is the carboxylic acid test.
Quick check
?0.010 mol of ethanoic acid reacts with excess sodium carbonate. What amount of carbon dioxide forms?
Mission 1

Esterification

Esterificationacid + alcoholOOH+OHethanoic acidethanolconc. H2SO4catalystester + waterOO+H2Oethyl ethanoatewater
  • Carboxylic acid + alcohol ⇌ ester + water
  • CH3COOH + CH3CH2OH ⇌ CH3COOCH2CH3 + H2O
  • Catalyst: concentrated H2SO4. Warm or reflux.
  • Reversible: an excess of one reactant gives a higher yield.
  • The water forms from the acid's –OH and the alcohol's H.
  • Uses: solvents (glues, nail varnish), plasticisers, perfumes, food flavourings.
Quick check
?Propanoic acid is warmed with methanol and a few drops of concentrated sulfuric acid. What ester forms?
Mission 1

Hydrolysis: splitting the ester

Hydrolysis of an esterOOthis bondbreaksethyl ethanoatediluteH2SO4(aq)NaOH(aq)refluxCH3COOH+ CH3CH2OHreversibleCH3COONa+ CH3CH2OHcomplete+ strongacidCH3COOHethanoic acid
  • Acid: reflux with dilute H2SO4(aq). Reversible; does not go to completion.
  • CH3COOCH2CH3 + H2O ⇌ CH3COOH + CH3CH2OH
  • Alkali: reflux with NaOH(aq). Goes to completion.
  • CH3COOCH2CH3 + NaOH → CH3COONa + CH3CH2OH
  • The carboxylate ion cannot react with the alcohol, so it does not reverse.
  • Add strong acid afterwards to get the free carboxylic acid.
Quick check
?Methyl propanoate, CH3CH2COOCH3, is heated under reflux with sodium hydroxide solution. What are the products?
Mission check

?Two bottles, X and Y, each hold a liquid of formula C3H6O2. One is propanoic acid; the other is methyl ethanoate.
X: boils at 141 °C, fizzes with sodium carbonate.
Y: boils at 57 °C, smells fruity, no fizzing.
Which statement is correct?
Mission 2

Mission 2: How can boiling cooking fat with an alkali turn it into soap?

Make a guess: How can boiling cooking fat with an alkali turn it into soap?

Mission 2

Fats and oils are triesters

A fat or oil is a triesterCH2CHCH2OHOHOHglycerol+3 ×ROOHfatty acidtriester (fat or oil)CH2CHCH2OOOOOO3 ester groups+ 3H2Ocis C=C: kink
  • Glycerol: propane-1,2,3-triol, CH2(OH)CH(OH)CH2OH. Three –OH groups.
  • Fatty acids: long-chain carboxylic acids, e.g. octadecanoic (stearic) acid, C17H35COOH.
  • Each –OH of glycerol forms an ester with one fatty acid.
  • The result is a triester (a triglyceride): three ester groups in one molecule.
  • Animal fats (mostly solid) and vegetable oils (liquid) are both triesters of glycerol.
Mission 2

Soap: hydrolysis in alkali

Saponification: boiling a fat with sodium hydroxidetriester + 3NaOH(aq), heatCH2CHCH2OOOOOOC(=O)–O breaks1 ×CH2CHCH2OHOHOHglycerol+3 ×ROONasoap
  • Boil (reflux) the triester with NaOH(aq).
  • All three ester groups are hydrolysed.
  • Triester + 3NaOH → glycerol + 3RCOO⁻Na⁺
  • The sodium salts of long-chain acids are soap.
  • As with any ester in alkali, the alkali makes the salt, and the reaction goes to completion.
Quick check
?Glyceryl trioctadecanoate, C57H110O6 (Mr 890.0), is a fat. What mass of NaOH (Mr 40.0) is needed to hydrolyse 8.90 g of it completely?
Mission 2

Biodiesel

Biodiesel: transesterification with methanoltriesterCH2CHCH2OOOOOOsame bond breaks+ 3CH3OHcatalyst(e.g. KOH)3 ×ROOCH3methyl ester(biodiesel)+1 ×CH2CHCH2OHOHOHglycerol
  • Heat vegetable oil with methanol and a catalyst (e.g. KOH).
  • Triester + 3CH3OH → 3RCOOCH3 + glycerol
  • One ester swapped for another: transesterification.
  • Biodiesel: a mixture of methyl esters of long-chain carboxylic acids.
Quick check
?Rapeseed oil is heated with methanol and a potassium hydroxide catalyst. What are the products?
Quick check
?Which of these is a soap?
Mission check

?Triacetin, a food additive, is the triester of propane-1,2,3-triol and ethanoic acid, (CH3COO)3C3H5. It is boiled with excess sodium hydroxide solution. What are the products?
Mission 3

Mission 3: Why does ethanoyl chloride fume in moist air, when ethanoic acid just sits in the bottle?

Make a guess: Why does ethanoyl chloride fume in moist air, when ethanoic acid just sits in the bottle?

Mission 3

Meet the acid derivatives

Acid derivatives of ethanoic acidCH3OOHethanoic acidCH3OClethanoyl chlorideCH3ONH2ethanamideCH3ONHCH3N-methylethanamideCH3OOOCH3ethanoic anhydride–OHgroup that replaces –OH
  • Swap the –OH of a carboxylic acid for another group: an acid derivative.
  • Acyl chloride: –COCl. Ethanoyl chloride, CH3COCl. Name ends -oyl chloride.
  • Acid anhydride: two acyl groups joined by O. Ethanoic anhydride, (CH3CO)2O.
  • Amide: –CONH2. Ethanamide, CH3CONH2 (a primary amide).
  • Secondary (N-substituted) amide: –CONHR, e.g. N-methylethanamide, CH3CONHCH3.
Mission 3

Why so reactive?

Why ethanoyl chloride is so reactiveethanoyl chlorideethanoic acidvery δ+ carbonless δ+ carbonCH3OClδ+δ−δ−CH3OOHδ+δ−δ−H2Olone pair
  • The carbonyl carbon is bonded to two electronegative atoms: O and Cl.
  • So it is strongly δ+: a target for any nucleophile with a lone pair.
  • Chlorine then leaves easily as Cl⁻: a good leaving group.
  • So acyl chlorides react at room temperature, often violently. No catalyst.
  • In a carboxylic acid the C is less δ+, and –OH is a poor leaving group.
  • So, the opening question: water vapour in the air hydrolyses it. The "fumes" are HCl.
Quick check
?Ethanoyl chloride reacts with cold water within seconds. Ethanoic acid can stay in water for years without changing. Which explains the difference?
Mission 3

Four nucleophiles, one pattern

Ethanoyl chloride with four nucleophilesCH3COClethanoylchloride+ H2O→ CH3COOH + HClethanoic acid+ C2H5OH→ CH3COOC2H5 + HClethyl ethanoate (ester)+ 2NH3→ CH3CONH2 + NH4Clethanamide (primary amide)+ 2CH3NH2→ CH3CONHCH3 + CH3NH3+Cl−N-methylethanamide
  • The nucleophile swaps in for Cl. HCl is the other product.
  • Water → carboxylic acid: CH3COCl + H2O → CH3COOH + HCl
  • Alcohol → ester: CH3COCl + CH3CH2OH → CH3COOCH2CH3 + HCl. Fast, and not reversible.
  • Ammonia → primary amide:
  • CH3COCl + 2NH3 → CH3CONH2 + NH4Cl. The second NH3 takes up the HCl.
  • Primary amine → N-substituted amide: CH3COCl + 2CH3NH2 → CH3CONHCH3 + CH3NH3⁺Cl⁻
Quick check
?Ethanoyl chloride is added dropwise to an excess of ethylamine, CH3CH2NH2. Which two products form?
Mission 3

The mechanism: addition–elimination

Addition-elimination: ethanoyl chloride and methanolStep 1 additionCH3OClOHCH312Step 2 eliminationintermediateOCH3ClOHCH334Step 3 loss of H+CH3OOHCH35Cl→ CH3COOCH3 + H+H+ + Cl− → HCl
  • Example: CH3COCl + CH3OH. Nucleophile: the lone pair on O of methanol.
  • Addition. Arrow 1: from the O lone pair to the carbonyl C. Arrow 2: from the C=O bond to the O atom (it becomes O⁻).
  • Elimination. Arrow 3: from an O⁻ lone pair back to the C–O bond, re-forming C=O. Arrow 4: from the C–Cl bond to Cl: Cl⁻ leaves.
  • Last step: arrow from the O–H bond to the O⁺. H⁺ is lost; with Cl⁻ it gives HCl.
  • Same arrows for water (O lone pair), NH3 and RNH2 (N lone pair).
  • With NH3 or RNH2, a second molecule removes the H⁺ from N⁺.
Quick check
?Ethanoyl chloride reacts with ammonia by nucleophilic addition–elimination. Which describes the first curly arrow?
Mission 3

Acid anhydrides: the gentler cousin

Leaving group: chloride ion or ethanoate ionethanoyl chlorideCH3OClleaves as Cl−by-product: HClethanoic anhydrideCH3OOOCH3leaves as CH3COO−by-product: CH3COOH
  • Same reactions, but the leaving group is ethanoate, not Cl⁻.
  • By-product: ethanoic acid, not HCl. Slower: warming is usually needed.
  • Alcohol → ester: (CH3CO)2O + CH3OH → CH3COOCH3 + CH3COOH
  • Water → acid: (CH3CO)2O + H2O → 2CH3COOH
  • Ammonia → amide: (CH3CO)2O + 2NH3 → CH3CONH2 + CH3COO⁻NH4⁺
  • Primary amine → N-substituted amide + RNH3⁺ ethanoate.
  • Mechanism: the same addition–elimination; you need only outline it for acyl chlorides.
Mission 3

Making aspirin

Making aspirin from salicylic acidOOHOHsalicylic acid+CH3OOOCH3ethanoic anhydrideOOHOOCH3aspirin+CH3OOHethanoic acid–COOH kept
  • Salicylic acid (2-hydroxybenzoic acid) has a phenolic –OH and a –COOH.
  • Ethanoic anhydride ethanoylates the –OH, making an ester: aspirin.
  • C7H6O3 + (CH3CO)2O → C9H8O4 + CH3COOH
Mission 3

Why industry uses the anhydride

  • Ethanoyl chloride would also make aspirin. Industry uses ethanoic anhydride:
  • Cheaper to buy.
  • Less corrosive, and reacts less violently: easier to control.
  • Reacts less readily with water, so it is easier to store and handle.
  • No HCl gas formed: the by-product is ethanoic acid, which is safer and can be reused.
Quick check
?Salicylic acid (2-hydroxybenzoic acid) is warmed with ethanoic anhydride to make aspirin. What happens?
Mission check

?Chloroethane, CH3CH2Cl, and ethanoyl chloride, CH3COCl, are each added to cold water. What do you see, and why?
Recap

The big ideas

Mission 1

  • Acid → ester: the O–H hydrogen is replaced by an alkyl group. No acidity, no hydrogen bonding between molecules.
  • Esters form with an acid catalyst (reversible) and hydrolyse with acid (reversible) or alkali (complete, gives the salt).

Mission 2

  • Fats and oils are triesters of glycerol. Hot NaOH hydrolyses all three ester groups: glycerol + soap (3 RCOO⁻Na⁺).
  • Methanol + catalyst instead: transesterification → methyl esters (biodiesel) + glycerol.

Mission 3

  • Acyl chlorides: δ+ carbonyl C and Cl⁻ leaving group. Water → acid, alcohol → ester, NH3 → amide, amine → N-substituted amide; HCl formed.
  • Ethanoic anhydride reacts the same way, more gently, giving ethanoic acid: used to make aspirin.
  • Mechanism: nucleophilic addition–elimination (lone pair → C; C=O → O; C=O re-forms; Cl⁻ leaves; H⁺ lost).
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Carboxylic acids and derivatives for AQA A-level Chemistry. 🎉

  1. Mission 1Swap one hydrogen for a carbon chain: why does a sour acid become a sweet-smelling liquid?
  2. Mission 2How can boiling cooking fat with an alkali turn it into soap?
  3. Mission 3Why does ethanoyl chloride fume in moist air, when ethanoic acid just sits in the bottle?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to A-Level Chemistry · AQA