← A-Level Chemistry · AQA · A-Level Chemistry revision
⭐ 0
AQA A-level Chemistry (7405) · 3.1.12 Acids and bases (A-level only) (part 2)
Mini-Lesson

Acids and bases (part 2)

4 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1Why is a solution of sodium ethanoate alkaline when no hydroxide was put in?
  2. Mission 2Two acids at the same concentration need the same volume of alkali. How can a titration show which one is weak?
  3. Mission 3How does a colourless dye suddenly turn pink at the end of a titration?
  4. Mission 4Why does your blood stay at about pH 7.4, even after a sprint?
Mission 1

Mission 1: Why is a solution of sodium ethanoate alkaline when no hydroxide was put in?

Make a guess: Why is a solution of sodium ethanoate alkaline when no hydroxide was put in?

Mission 1

pH of a weak acid: two approximations

Weak acid at equilibrium0.050 mol dm−3 HCOOH+−[HA] ≈ initial+−[H+] = [A−]
  • HA ⇌ H⁺ + A⁻, with Ka = [H⁺][A⁻]/[HA].
  • Approximation 1: so little HA dissociates that [HA]eqm ≈ [HA]initial.
  • Approximation 2: each HA gives one H⁺ and one A⁻, and water adds almost none, so [H⁺] ≈ [A⁻].
  • So Ka ≈ [H⁺]²/[HA], giving [H⁺] = √(Ka × [HA]). No quadratic needed.
Mission 1

Worked example: methanoic acid

  • 0.050 mol dm⁻³ methanoic acid, pKa 3.75, at 298 K.
  • Ka = 10⁻³·⁷⁵ = 1.78 × 10⁻⁴.
  • [H⁺] = √(1.78 × 10⁻⁴ × 0.050) = 2.98 × 10⁻³.
  • pH = 2.53.
  • A strong acid at the same concentration: pH 1.30. Weak means fewer H⁺ ions.
Quick check
?What is the pH of 0.100 mol dm⁻³ ethanoic acid, CH3COOH(aq), at 298 K? Ka = 1.74 × 10⁻⁵. Assume that the equilibrium concentration of CH3COOH equals its initial concentration.
Quick check
?A 0.20 mol dm⁻³ solution of a weak acid, HA, has pH 2.70 at 298 K. What is Ka?
Mission 1

pH of a weak base

  • Background: your exams won't ask you to calculate this, but it shows the same method working for bases.
  • B + H2O ⇌ BH⁺ + OH⁻. Same two approximations: [OH⁻] = √(Kb × [B]).
  • Then [H⁺] = Kw ÷ [OH⁻], and pH = −log10[H⁺].
  • Worked: 0.10 mol dm⁻³ methylamine, pKb 3.34. Kb = 4.57 × 10⁻⁴.
  • [OH⁻] = √(4.57 × 10⁻⁵) = 6.76 × 10⁻³; [H⁺] = Kw ÷ [OH⁻] = 1.48 × 10⁻¹², so pH = 11.83.
Mission 1

Salt hydrolysis: the answer

Hydrolysis of the ethanoate ionCH3OO−OHH+H+ movesNa+spectatorCH3OOH+OH−
  • Background: salt hydrolysis isn't on your specification, but it answers the video's question.
  • Sodium ethanoate dissolves: CH3COONa(s) → Na⁺(aq) + CH3COO⁻(aq).
  • CH3COO⁻ is the conjugate base of a weak acid, so it takes H⁺ from water:
  • CH3COO⁻ + H2O ⇌ CH3COOH + OH⁻
  • OH⁻ is left behind, so [OH⁻] > [H⁺]: alkaline. No hydroxide was added; water supplied it.
  • Na⁺ comes from a strong base and does not react with water.
  • This reaction of an ion with water is hydrolysis.
Mission 1

Predicting the pH of a salt

pH of a salt from its parent acid and baseparent basestrongweakparent acid7e.g. NaCl< 7e.g. NH4Cl> 7e.g. CH3COONadepends onKa and Kbstrongweak
  • Strong acid + strong base (NaCl, KNO3): neither ion hydrolyses → pH 7.
  • Background, like the earlier screen: not on your specification.
  • Weak acid + strong base (CH3COONa, Na2CO3): anion takes H⁺ from water → pH > 7.
  • Strong acid + weak base (NH4Cl): NH4⁺ + H2O ⇌ NH3 + H3O⁺ → pH < 7.
Mission check

?Propanoic acid, CH3CH2COOH, is a weak acid used to stop bread going mouldy. What is the pH of 0.050 mol dm⁻³ propanoic acid at 298 K? pKa = 4.87.
Mission 2

Mission 2: Two acids at the same concentration need the same volume of alkali. How can a titration show which one is weak?

Make a guess: Two acids at the same concentration need the same volume of alkali. How can a titration show which one is weak?

Mission 2

Four curves, four shapes

Four pH curvesstrong acid+ strong base025500714pH 7weak acid+ strong base025500714above 7strong acid+ weak base025500714below 7weak acid+ weak base025500714no sharpsteepsectionpHpHvolume of base added / cm3
  • Base added to 25.0 cm³ of acid, all 0.100 mol dm⁻³:
  • Strong acid + strong base: starts near pH 1; long steep section; equivalence at pH 7.
  • Weak acid + strong base: starts higher; gentle buffer region; equivalence above 7.
  • Strong acid + weak base: starts near pH 1; equivalence below 7; levels off well below the strong-base curve.
  • Weak acid + weak base: no sharp steep section.
  • Acid added to base: the same features, with the curve falling.
Mission 2

Measuring a pH curve

pH curve apparatuspH meteror loggerburettepH probemagnetic stirreracidcalibrate first with bufferspH 4.00pH 7.00
  • Calibrate the pH meter with buffer solutions of known pH (e.g. 4.00 and 7.00).
  • Acid in a beaker with the probe; stir throughout.
  • Add base from a burette: 1 cm³ at a time, then 0.1–0.2 cm³ near the steep section.
  • Record the pH once steady after each addition. Plot pH (y) against volume added (x).
  • Required practical 9: weak acid + strong base, and strong acid + weak base.
Mission 2

Reading the key points

Annotated weak acid and strong base titration curve0102030405002468101214volume of NaOH added / cm3pHbuffer regioninterceptpH 2.94half-equivalencepH = pKa = 4.87equivalence point25.0 cm3, pH 8.7850.0 cm3pH 12.52
  • Intercept: pH before any titrant is added.
  • Equivalence point: middle of the steep section; amounts match the equation.
  • Buffer region: gentle slope before equivalence; HA and A⁻ both present.
  • Half-equivalence: [HA] = [A⁻], so Ka = [H⁺] and pH = pKa.
Quick check
?25.0 cm³ of 0.100 mol dm⁻³ ethanoic acid (pKa = 4.76) is titrated with 0.100 mol dm⁻³ NaOH(aq) at 298 K. What is the pH after 12.5 cm³ of NaOH(aq) has been added?
Mission 2

Same volume, different shape

  • Equal amounts of acid need equal volumes of base, strong or weak. As OH⁻ removes H⁺, more HA dissociates until all has reacted.
  • But a weak acid's curve starts higher: it is only partly dissociated.
  • It has a buffer region: HA and A⁻ together resist pH change.
  • Its equivalence point is above 7: the flask holds A⁻, and A⁻ + H2O ⇌ HA + OH⁻.
  • Strong acid + weak base: the flask holds BH⁺, which makes equivalence below 7.
Mission 2

Ka from half-neutralisation

  • Find the equivalence volume, then read the pH at half that volume. pH = pKa.
  • Example: half-neutralisation pH = 4.20.
  • Ka = 10⁻⁴·²⁰ = 6.3 × 10⁻⁵ mol dm⁻³.
  • Lower pH at half-neutralisation → larger Ka → stronger acid.
Quick check
?A pH curve starts at pH 1.0. It rises slowly, then steeply from about pH 3 to pH 7, with the equivalence point at about pH 5.5. It then levels off below pH 10. Which titration does it show?
Mission 2

The curve picks the indicator

Annotated weak acid and strong base titration curve0102030405002468101214volume of NaOH added / cm3pHbuffer regioninterceptpH 2.94half-equivalencepH = pKa = 4.87equivalence point25.0 cm3, pH 8.7850.0 cm3pH 12.52phenolphthaleinabout 8–10methyl orange, about 3–4.5
  • The indicator must change colour within the steep section, at the equivalence point.
  • Weak acid + strong base: phenolphthalein (changes about pH 8–10).
  • Strong acid + weak base: methyl orange (changes about pH 3–4.5).
  • Strong + strong: either works. Weak + weak: no indicator gives a sharp end point.
  • Why indicators work: Mission 3.
Mission check

?Separate 20.0 cm³ portions of 0.100 mol dm⁻³ NaOH(aq) and of 0.100 mol dm⁻³ base B(aq) are each titrated with 0.100 mol dm⁻³ HCl(aq). Both need 20.0 cm³ of acid. Which feature of the curves shows that B is a weak base?
Mission 3

Mission 3: How does a colourless dye suddenly turn pink at the end of a titration?

Make a guess: How does a colourless dye suddenly turn pink at the end of a titration?

Mission 3

Indicators are weak acids

Indicator equilibriumHInd(aq) ⇌ H+(aq) + Ind−(aq)phenolphthalein, written as HIndHIndInd−−H++H+colourlesspinkadd H+: shifts leftcolourless HInd showsadd OH− (removes H+): shifts rightpink Ind− shows
  • Background: your spec asks you to choose indicators; this is why they work.
  • An indicator is a weak acid: HInd ⇌ H⁺ + Ind⁻.
  • HInd and Ind⁻ have different colours.
  • Add acid: [H⁺] rises, the equilibrium shifts left: HInd's colour.
  • Add alkali: OH⁻ removes H⁺, it shifts right: Ind⁻'s colour.
  • Phenolphthalein: HInd colourless, Ind⁻ pink.
  • A few drops only, so the indicator barely affects the pH.
Mission 3

Why not universal indicator?

  • Universal indicator is a mixture of indicators with different pKa values.
  • Their changes follow one another: a different colour at most pH values.
  • Good for estimating pH.
  • Useless for a titration: it changes gradually, with no single sharp change to mark the end.
Mission 3

End point vs equivalence point

End point against equivalence point0102030405002468101214volume of NaOH added / cm3pHphenolphthaleinabout pH 8–10end point ≈equivalence pointmethyl orangeabout pH 3–4.5end point far too earlypropanoic acid + NaOH, pKa 4.87
  • Equivalence point: acid and base have reacted in the stoichiometric ratio.
  • End point: the indicator changes colour.
  • A good indicator changes colour within the steep section, so the end point matches the equivalence point.
  • In the steep section, one drop (about 0.05 cm³) moves the pH by several units, right across the range.
Mission 3

Which indicator?

  • Weak acid + strong base: equivalence above 7 → phenolphthalein (range about 8–10).
  • Strong acid + weak base: equivalence below 7 → methyl orange (range about 3–4.5).
  • Strong acid + strong base: steep section about 3–11 → either.
  • Weak acid + weak base: no steep section → no indicator is suitable.
Quick check
?25.0 cm³ of 0.100 mol dm⁻³ ethanoic acid (pKa = 4.76) is titrated with 0.100 mol dm⁻³ NaOH(aq) at 298 K. Three indicators are available, with these pH ranges: methyl orange 3.1–4.4; bromothymol blue 6.0–7.6; phenolphthalein 8.3–10.0. Which choice of indicator, with its reason, is correct?
Quick check
?25.0 cm³ of 0.100 mol dm⁻³ ammonia is titrated with 0.100 mol dm⁻³ hydrochloric acid. Which indicator is the most suitable? Ranges: methyl orange 3.1–4.4; phenolphthalein 8.3–10.0; thymol blue 8.0–9.6; alizarin yellow 10.1–12.0.
Mission check

?This time 25.0 cm³ of 0.100 mol dm⁻³ NaOH(aq) is in the flask, and 0.100 mol dm⁻³ ethanoic acid is run in from the burette. The pH curve: 13.0 at the start, 12.0 at 20.5 cm³, 11.0 at 24.5 cm³; then a steep drop through the equivalence point (25.0 cm³, pH 8.7) to 7.2 at 25.1 cm³; then a slow fall to 4.8 at 50.0 cm³. Which indicator should be used?
Mission 4

Mission 4: Why does your blood stay at about pH 7.4, even after a sprint?

Make a guess: Why does your blood stay at about pH 7.4, even after a sprint?

Mission 4

What a buffer is

  • A buffer keeps the pH approximately constant despite dilution or adding small amounts of acid or base.
  • Acidic buffer: a weak acid + its salt, e.g. CH3COOH with CH3COONa.
  • Basic buffer: a weak base + its salt, e.g. NH3 with NH4Cl.
Mission 4

Two ways to make one

  • Mix a weak acid with its salt.
  • Or part-neutralise: excess weak acid + some NaOH. CH3COOH + OH⁻ → CH3COO⁻ + H2O makes the salt; leftover acid stays.
  • Basic buffer: excess weak base + some strong acid, e.g. NH3 + HCl.
Mission 4

How a buffer works

Buffer action: CH3COOH and CH3COO- in a beaker with added H+ or OH-CH3COOHCH3COO−Na+ (spectator)+ H++ OH−CH3COO− + H+→ CH3COOHH+ removedCH3COOH + OH−→ CH3COO− + H2OOH− removedschematic: a little H+ addedHA = CH3COOH, A− = CH3COO−HAA−beforeHAA−after
  • Acidic buffer: big reservoirs of HA and A⁻.
  • Add H⁺: the base of the pair removes it. CH3COO⁻ + H⁺ → CH3COOH.
  • Add OH⁻: the acid of the pair removes it. CH3COOH + OH⁻ → CH3COO⁻ + H2O.
  • The ratio [HA]/[A⁻] changes only a little, so the pH changes only slightly.
  • Basic buffer: NH3 + H⁺ → NH4⁺, and NH4⁺ + OH⁻ → NH3 + H2O.
  • A buffer reduces a pH change; it can't stop it completely.
Quick check
?Which mixture, made up to 1.00 dm³ with water, is an acidic buffer solution?
Mission 4

Buffer pH

  • Rearrange Ka: [H⁺] = Ka × [HA] ÷ [A⁻].
  • Assume [HA] = acid added and [A⁻] = salt added: very little of either reacts with water.
  • [HA] = [A⁻] gives pH = pKa.
  • Worked: 0.10 mol dm⁻³ HCOOH + 0.25 mol dm⁻³ HCOONa, Ka = 1.78 × 10⁻⁴. [H⁺] = 1.78 × 10⁻⁴ × 0.10 ÷ 0.25 = 7.1 × 10⁻⁵. pH = 4.15.
  • More A⁻ than HA → pH above pKa.
Quick check
?A buffer solution at 298 K contains 0.20 mol dm⁻³ CH3COOH and 0.10 mol dm⁻³ CH3COONa. Ka(CH3COOH) = 1.74 × 10⁻⁵ mol dm⁻³. What is the pH of the buffer?
Calculate

A buffer from part-neutralisation

?50.0 cm³ of 0.200 mol dm⁻³ propanoic acid (Ka = 1.35 × 10⁻⁵ mol dm⁻³) is mixed with 25.0 cm³ of 0.100 mol dm⁻³ NaOH(aq) at 298 K. Calculate the pH.
Mission 4

Adding a little acid: the numbers

  • 1.00 dm³ buffer: 0.100 mol CH3COOH + 0.100 mol CH3COO⁻. pH = pKa = 4.76.
  • Add 0.010 mol HCl. CH3COO⁻ + H⁺ → CH3COOH.
  • Now 0.110 mol CH3COOH and 0.090 mol CH3COO⁻.
  • [H⁺] = 1.74 × 10⁻⁵ × 0.110 ÷ 0.090 = 2.13 × 10⁻⁵. pH = 4.67: down only 0.09.
  • The same HCl in 1.00 dm³ of pure water: pH 7.00 → 2.00.
Mission 4

Diluting a buffer

  • Dilution lowers [HA] and [A⁻] by the same factor: the ratio, and so the pH, stays about the same.
  • Compare: diluting a strong acid tenfold raises its pH by 1.
  • But each portion now holds less HA and A⁻, so the buffer capacity falls.
Quick check
?A buffer containing 0.20 mol dm⁻³ CH3COOH and 0.10 mol dm⁻³ CH3COO⁻ has pH 4.46. It is diluted with an equal volume of water. To a first approximation, what happens to its pH?
Mission 4

Your blood after a sprint

Blood buffer after a sprintmusclesmake H+H+blood plasmaHCO3− + H+ → H2CO3removes the H+H2CO3 → CO2 + H2OCO2lungsCO2breathed outplasma pH barely moves7.07.87.35–7.45
  • Blood plasma holds carbonic acid, H2CO3, and hydrogencarbonate ions, HCO3⁻.
  • Muscles add H⁺: HCO3⁻ + H⁺ → H2CO3. Most of the H⁺ is removed.
  • H2CO3 → CO2 + H2O, and you breathe out the extra CO2.
  • Result: pH stays 7.35–7.45.
  • Other uses: shampoos, foods and drinks, enzyme reactions in fermentation, calibrating pH meters.
Mission check

?Inside cells, a buffer of dihydrogenphosphate ions, H2PO4⁻, and hydrogenphosphate ions, HPO4²⁻, helps keep the pH close to 7. A process in the cell releases some OH⁻ ions. Which reaction removes most of the added OH⁻?
Recap

The big ideas

Mission 1

  • Weak acid: [H⁺] = √(Ka × [HA]), assuming little dissociation and [H⁺] = [A⁻].
  • Salt of a weak acid + strong base → pH > 7; strong acid + weak base → pH < 7; strong + strong → pH 7.

Mission 2

  • Equal amounts need equal volumes; strength shows in the shape: intercept, buffer region, equivalence pH.
  • Half-equivalence: pH = pKa. Equivalence: above 7 for a weak acid, below 7 for a weak base.

Mission 3

  • An indicator is a weak acid, HInd ⇌ H⁺ + Ind⁻, with two differently coloured forms.
  • It changes colour around pH = pKa; pick one that changes within the steep section.
  • Weak acid + strong base: phenolphthalein. Strong acid + weak base: methyl orange. Weak + weak: none.

Mission 4

  • A buffer holds a weak acid and its conjugate base (or a weak base and its conjugate acid).
  • [H⁺] = Ka × [HA] ÷ [A⁻]; dilution keeps the ratio, so the pH stays about the same.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Acids and bases (part 2) for AQA A-level Chemistry. 🎉

  1. Mission 1Why is a solution of sodium ethanoate alkaline when no hydroxide was put in?
  2. Mission 2Two acids at the same concentration need the same volume of alkali. How can a titration show which one is weak?
  3. Mission 3How does a colourless dye suddenly turn pink at the end of a titration?
  4. Mission 4Why does your blood stay at about pH 7.4, even after a sprint?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to A-Level Chemistry · AQA