← A-Level Biology · OCR · A-Level Biology revision
⭐ 0
OCR A-level Biology A (H420) · 2.1.2 Biological molecules (part 2 of 2)
Mini-Lesson

Biological molecules (part 2)

5 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1Oily molecules avoid water, yet they wrap every cell in a thin film. How does that film build itself?
  2. Mission 2Every protein in your body is built from just twenty building blocks. How can so few make so many?
  3. Mission 3A protein is only a chain of amino acids. So how does it fold into the exact shape its job needs?
  4. Mission 4A tendon protein is tough as rope, a blood protein dissolves. Both are amino acid chains. Why so different?
  5. Mission 5Why can a shortage of one simple charged particle stop a cell, or a whole plant, from working properly?
Mission 1

Mission 1: Oily molecules avoid water, yet they wrap every cell in a thin film. How does that film build itself?

Make a guess: Oily molecules avoid water, yet they wrap every cell in a thin film. How does that film build itself?

Mission 1

Lipids are more than fat

  • Lipids dissolve in non-polar solvents but only sparingly in water: they are hydrophobic.
  • Here: phospholipids, the lipids of membranes.
  • Also cholesterol, a steroid.
  • Not every lipid is an energy store.
Mission 1

Building a phospholipid

Triglyceride to phospholipidtriglyceridephospholipidCCCCCCglycerolPphosphate-containinggroupswap3 fatty acids2 fatty acids
  • Start with a triglyceride: glycerol + three fatty acids.
  • Swap one fatty acid for a phosphate-containing group.
  • So: glycerol + two fatty acids + phosphate group.
  • Result: a head (phosphate) and two tails (fatty acids).
Mission 1

Amphipathic: two personalities

Head and tailsphosphate: charged, hydrophilicamphipathichydrocarbon: non-polar, hydrophobicmodelsymbol
  • Head: phosphate group, charged. It is hydrophilic: it interacts with water.
  • Tails: hydrocarbon chains, non-polar. They are hydrophobic.
  • This is called amphipathic.
  • Say: "the tails are excluded from water" — not: "the tails repel water".
Quick check
?Which components are linked together by condensation reactions to form one phospholipid molecule?
Mission 1

The bilayer builds itself

Self-assemblyairwaterheads in water, tails in airtail to tailwatercloses intoa sphereheads on bothfaces
  • (1) On water, phospholipids form a single layer: heads in the water, tails in the air.
  • (2) Under water, tails cannot stay in the air. They hide by pairing up tail to tail.
  • (3) Result: a phospholipid bilayer. Heads face the water on both sides; tails form a non-polar core.
  • No enzymes, no energy from the cell: water molecules hydrogen-bond to each other and exclude the tails.
  • A sheet's edges still expose tails, so it closes into a sphere.
  • The molecules are not covalently bonded to each other, so the bilayer is fluid.
Quick check
?Phospholipids are shaken with water in a test tube, with no cells or enzymes present. What happens, and why?
Mission 1

Triglyceride or phospholipid?

TriglyceridePhospholipid
Partsglycerol + 3 fatty acidsglycerol + 2 fatty acids + phosphate group
In waterwholly hydrophobic: forms dropletsamphipathic: forms bilayers
Main roleenergy storemembranes
  • Triglyceride: many C–H bonds, so a high energy content; insoluble, so no effect on water potential.
  • Phospholipid: the bilayer's non-polar core stops water-soluble molecules and ions crossing freely.
  • Both prokaryotes and eukaryotes have phospholipid membranes; prokaryotes (e.g. some bacteria) also store triglyceride droplets.
Mission 1

Steroids and cholesterol

Cholesterol in a membranecholesterol: stabilityphospholipid
  • Cholesterol is a steroid lipid.
  • In animal cell membranes, cholesterol sits among the phospholipids and gives stability.
  • Almost no prokaryotes make cholesterol. It is a feature of eukaryotic (animal) membranes.
Quick check
?A drug removes most of the cholesterol from the plasma membranes of cultured animal cells but does not otherwise damage the cells. Which prediction about the treated cells is most likely correct?
Mission check

?Lipoproteins carry cholesterol and triglycerides in blood plasma, which is mostly water. Each lipoprotein has an oily core of cholesterol and triglyceride, surrounded by a single layer of phospholipids (with some proteins). How are the phospholipids in this layer most likely arranged?
Mission 2

Mission 2: Every protein in your body is built from just twenty building blocks. How can so few make so many?

Make a guess: Every protein in your body is built from just twenty building blocks. How can so few make so many?

Mission 2

One plan, twenty versions

General amino acidCNCHOOHHHRaminegroupcarboxylgroupR group:the only part that variescentral carbon
  • Amino acids are the monomers of proteins.
  • A central carbon atom carries four groups:
  • Amine group (–NH2), carboxyl group (–COOH), a hydrogen atom, and an R group (side chain).
  • The twenty amino acids in proteins differ only in their R group.
  • The simplest R group is a single hydrogen atom.
  • Say: "amine group, –NH2" — not: "–NH3". Nitrogen's third bond is to the central carbon.
Quick check
?Which feature is shared by all 20 of the amino acids that are coded for in the genetic code?
Mission 2

The peptide bond

Peptide bondNCCHHOHR1NCCHHOHR2OHCOHH2Ocondensationhydrolysis+ H2ONCCNCCHHHOHHOOHR1R2peptidebondfree amine endfree carboxyl end
  • (1) Line up two amino acids: the carboxyl group of one beside the amine group of the next.
  • (2) –OH from the carboxyl and –H from the amine leave as one water molecule.
  • (3) C joins N: a peptide bond, –CO–NH–. A covalent bond. Two amino acids make a dipeptide.
  • This is a condensation reaction.
  • Hydrolysis reverses it: adding water breaks the peptide bond.
  • The R groups take no part.
Quick check
?Two amino acids react to form a dipeptide. Which statement describes this reaction?
Mission 2

Worked example: counting bonds and water

  • Many amino acids joined in a chain: a polypeptide.
  • A chain has two ends: a free amine group at one, a free carboxyl group at the other.
  • n amino acids → n − 1 peptide bonds → n − 1 water molecules released.
  • 3 amino acids: 2 bonds, 2 H2O.
  • Masses: glycine (Mr 75) + alanine (Mr 89) → dipeptide.
  • Mr = 75 + 89 − 18 = 146. Subtract one water per bond.
  • Hydrolysis of the chain uses the same number of water molecules.
  • Any of the twenty can sit at any position, repeats allowed, in any order, in chains of any length. So the number of possible sequences is effectively unlimited.
Quick check
?A polypeptide of 150 amino acids is assembled by condensation reactions. How does the number of water molecules change as the whole chain is formed?
Mission check

?Two short polypeptides, P and Q, are each made of the same five amino acids, but the amino acids are joined in a different order in P and in Q. Which statement about P and Q is correct?
Mission 3

Mission 3: A protein is only a chain of amino acids. So how does it fold into the exact shape its job needs?

Make a guess: A protein is only a chain of amino acids. So how does it fold into the exact shape its job needs?

Mission 3

Sequence, shape, job

  • A polypeptide folds into a precise three-dimensional shape.
  • Bonds between parts of the chain hold that shape. Most are weak; together they are strong.
  • The shape decides the function: enzymes, hormones, antibodies, transport, support.
  • The same sequence folds the same way, every time.
  • Different sequences fold differently. So endless sequences give endless proteins.
  • Four levels describe the shape: primary, secondary, tertiary, quaternary.
Mission 3

Primary structure

Primary structure…GlyAlaSerCysH2NCOOHfree amineendfree carboxylendpeptide bondthe order of amino acids
  • Primary structure: the sequence of amino acids in a polypeptide.
  • Held by peptide bonds. Set by the gene.
  • The sequence, with the exact position of each amino acid, determines every later level.
  • Change one amino acid, anywhere, and the shape can change.
  • Say: "primary structure = the order of amino acids" — not: "which amino acids are present".
Mission 3

Secondary structure

Secondary structureα-helixβ-pleated sheetnn + 4RRRRdashed: hydrogen bondsbetween backbone C=O and N–H
  • The backbone carries polar C=O and N–H groups.
  • Hydrogen bonds form between the C=O of one peptide bond and the N–H of another, at regular positions.
  • α-helix: the chain coils; each turn is held to the next.
  • β-pleated sheet: lengths of chain lie side by side, folded like pleats, held to each other.
  • R groups point away from the backbone and take no part in these bonds, so helices and sheets form in many sequences.
  • Say: "backbone hydrogen bonds" — not: "bonds between R groups".
Quick check
?What stabilises the alpha helices and beta-pleated sheets of a protein's secondary structure?
Mission 3

Tertiary structure: R groups lock the fold

Tertiary structureSSdisulfide bridge(S–S, covalent)hydrogen bond(polar R groups)ionic bond–COO− ··· +H3N–hydrophobicinteractions
  • The chain, with its helices and sheets, folds further into its overall 3D shape: tertiary structure.
  • Held by bonds between R groups:
  • Hydrogen bonds: between polar R groups. Weak, but many.
  • Ionic bonds: between a –COO⁻ and an –NH3⁺ R group. pH-sensitive.
  • Disulfide bridges: covalent S–S bonds between two cysteines. Strong.
  • Hydrophobic interactions: non-polar R groups cluster together, away from water.
Mission 3

Oily inside, watery outside

Core and surfacesurface: polarand chargedcore: non-polar
  • In a water-soluble protein: non-polar R groups cluster in the core.
  • Polar and charged R groups sit on the surface, in contact with water. So the protein dissolves.
  • Why: water molecules hydrogen-bond to each other and exclude non-polar groups.
  • Say: "non-polar R groups are excluded from water" — not: "they repel water".
Quick check
?In one region of a polypeptide there are two cysteines, an amino acid whose R-group contains a carboxyl group and an amino acid whose R-group contains an amine group. Which statement about the bonds these could form in the tertiary structure is correct?
Mission 3

Quaternary structure

Quaternary structurepolypeptide1polypeptide2polypeptide3polypeptide4
  • Some proteins are built from more than one polypeptide: quaternary structure.
  • The polypeptides are held together by the same kinds of bond as tertiary structure.
  • Example: haemoglobin, four polypeptides (see Mission 4).
  • All four levels together decide what the protein does.
Mission 3

Denaturation

Denaturationactivesiteweak bonds (dashed) hold the foldpeptide bonds (solid)heat: weak bonds breakthe chain loosensunfolded: active site gonepeptide bonds (solid) still intactpH change: R-group charges altered–COO−+ H+–COOH
  • (1) A folded protein: its shape held by many weak bonds.
  • (2) High temperature: more vibration breaks hydrogen bonds and ionic bonds. The chain unfolds.
  • (3) pH change: gaining or losing H⁺ changes the charges on R groups. Ionic and hydrogen bonds break.
  • This loss of shape is denaturation. The protein can no longer do its job.
  • Peptide bonds stay intact: the sequence is unchanged.
  • Usually permanent: the chains do not refold correctly. A cooked egg white stays white.
  • Cold does not denature: it slows molecules down, and activity returns on warming.
  • Say: "the enzyme is denatured" — not: "the enzyme is killed".
Quick check
?When egg white is heated, its soluble proteins turn into a white solid. What has happened to the protein molecules?
Quick checkRead the data
?(Illustrative data.) An enzyme's activity at its optimum pH of 7 was 100 units. One sample was placed at pH 2 for 10 minutes, then returned to pH 7: its activity was 4 units after 1 hour and 4 units after 24 hours, and its polypeptide chains were found to be intact. A second sample was cooled to 5 °C for 10 minutes, then returned to 37 °C: its activity was 100 units. What do these results show?
Mission check

?A mutation replaces one amino acid in an enzyme at a position on the surface far from the active site in the folded protein. The enzyme loses most of its activity. What is the best explanation?
Mission 4

Mission 4: A tendon protein is tough as rope, a blood protein dissolves. Both are amino acid chains. Why so different?

Make a guess: A tendon protein is tough as rope, a blood protein dissolves. Both are amino acid chains. Why so different?

Mission 4

Two body plans: globular and fibrous

Globular and fibrous proteinsglobularfibrouspolar surfacenon-polar core3 twistedstrandsmany ropes,side by sideboth have precise shapesnot to scale
GlobularFibrous
Shapecompact, roughly sphericallong, parallel chains
In watersoluble: polar R groups on the outsideinsoluble
Jobsenzymes, hormones, transportstrength and support
Exampleshaemoglobin, insulin, enzymescollagen, keratin, elastin
  • Both have a precise, repeatable 3D structure.
  • Say: "fibrous proteins have an elongated structure" — not: "fibrous proteins are unfolded".
Mission 4

Haemoglobin

HaemoglobinαββαO2O2O2O2haem = prosthetic groupFe2+one O2 per haemconjugated protein
  • A globular protein of four polypeptides: two α and two β. So it has quaternary structure.
  • Each polypeptide holds one haem group: a ring with an Fe²⁺ ion at its centre.
  • Each haem binds one O2. One haemoglobin carries up to four O2.
  • Haem is not made of amino acids. It is a prosthetic group.
  • A protein with a prosthetic group is a conjugated protein.
  • OCR: a conjugated protein is a globular protein with a prosthetic group.
  • Polar R groups on the surface keep it soluble inside red blood cells.
Mission 4

Insulin and a named enzyme

  • Insulin: a small globular hormone.
  • Two polypeptides (21 and 30 amino acids), linked by disulfide bridges.
  • Soluble, so it travels in blood plasma.
  • Its precise shape fits its receptor on target cells.
  • Named enzyme, amylase: globular and soluble; its active site fits part of a starch chain and hydrolyses its glycosidic bonds.
Mission 4

Conjugated and modified proteins

  • Conjugated protein: protein + prosthetic group (a non-protein part).
  • Haemoglobin: prosthetic group haem.
  • Glycoprotein: carbohydrate chains attached, e.g. many cell-surface receptors and the mucins in mucus.
  • Say: "conjugated = has a prosthetic group" — not: "conjugated = has more than one polypeptide".
Quick check
?Which statement correctly compares insulin, collagen and haemoglobin?
Mission 4

Collagen: built to take a pull

Collagen fibre in a tendonmuscletendonbonecollagen fibrestensile strength
  • Long, insoluble, with very high tensile strength.
  • Found in tendons, ligaments, skin, bone, cartilage and artery walls.
  • Keratin: tough, insoluble, waterproof; many disulfide bridges. Hair, nails, outer skin.
  • Elastin: stretches and recoils. Artery walls, alveoli, skin.
Quick check
?Protein X is compact and roughly spherical, dissolves in blood plasma and binds to a specific receptor on target cells. Protein Y forms long insoluble fibres with high tensile strength in tendons. Which statement correctly relates the form of each protein to its function?
Mission check

?Spider dragline silk is a protein. Its long polypeptide chains lie parallel to one another, with many stretches folded into β-pleated sheets that are stacked and held together by hydrogen bonds. It does not dissolve in water. Which statement best explains why it suits the frame of a web?
Mission 5

Mission 5: Why can a shortage of one simple charged particle stop a cell, or a whole plant, from working properly?

Make a guess: Why can a shortage of one simple charged particle stop a cell, or a whole plant, from working properly?

Mission 5

Ions: small, charged, specific

  • An ion is an atom, or a group of atoms, with an electric charge.
  • Cation: positive, e.g. Na⁺. Anion: negative, e.g. Cl⁻.
  • Inorganic ions dissolve in water: cytoplasm, blood, tissue fluid, plant sap.
  • Each type of ion has a specific role, set by its properties: its charge, its size, what it binds to.
  • One ion cannot stand in for another.
Mission 5

Names and symbols

Ion cardscations (+)anions (−)Ca2+calciumNa+sodiumK+potassiumH+hydrogenNH4+ammoniumNO3−nitrateHCO3−hydrogencarbonateCl−chloridePO43−phosphateOH−hydroxide
  • Cations: calcium Ca²⁺, sodium Na⁺, potassium K⁺, hydrogen H⁺, ammonium NH4⁺.
  • Anions: nitrate NO3⁻, hydrogencarbonate HCO3⁻, chloride Cl⁻, phosphate PO4³⁻, hydroxide OH⁻.
  • The superscript gives the charge: ²⁺ means two positive charges; ³⁻ three negative.
  • Ammonium and nitrate both contain nitrogen, but carry opposite charges.
  • Say: "hydrogencarbonate ion, HCO3⁻" — not: "carbonate".
Quick check
?Which ion is given with its correct symbol?
Mission 5

Four ions, four jobs

Four jobsH+ and enzymesH+014pHmore H+PhosphateDNA, RNAATP
  • H⁺: the more H⁺, the lower the pH. pH changes the charges on proteins, so enzymes can denature.
  • Phosphate (PO4³⁻): part of DNA, RNA and ATP.
Mission 5

More ions, more jobs

  • Ca²⁺: in bones and teeth (as calcium phosphate); triggers muscle contraction.
  • HCO3⁻: carries CO2 in blood plasma; part of the blood's buffer that keeps pH steady.
  • K⁺: guard cells take it up; their water potential falls, water enters by osmosis, the stoma opens.
  • Na⁺ and K⁺: nerve impulses. Cl⁻: balances charge in red blood cells (chloride shift).
  • NH4⁺: released as decomposers break down proteins; bacteria convert it to NO3⁻.
  • NO3⁻: plants absorb it to make amino acids and nucleotides. Short of nitrate, growth is stunted.
  • OH⁻: with H⁺, sets the pH.
Quick check
?Which molecules need phosphate ions to be built?
Mission check

?Chlorophyll has a magnesium ion at its centre. Haem, in haemoglobin, has an iron ion at its centre. Both ions carry a 2+ charge. A plant short of magnesium is given extra iron ions instead. What happens to its yellowing leaves?
Recap

The big ideas

Mission 1

  • Phospholipids are amphipathic: a hydrophilic phosphate head and two hydrophobic tails; in water they form bilayers by themselves.
  • Steroids, such as cholesterol, are non-polar lipids with different jobs: membrane stability, hormones.

Mission 2

  • Every amino acid: central carbon + amine group + carboxyl group + H + R group; only R differs.
  • Condensation joins carboxyl to amine: a peptide bond and one water per bond; hydrolysis reverses it.

Mission 3

  • The amino acid sequence decides how a chain folds; bonds between parts of the chain hold the shape; the shape decides the job.
  • Primary (sequence) → secondary (backbone H bonds: α-helix, β-pleated sheet) → tertiary (R-group bonds) → quaternary (more than one polypeptide).
  • Heat and pH changes break the weak bonds: the protein is denatured, though its peptide bonds survive.

Mission 4

  • Globular proteins (haemoglobin, insulin, enzymes) are compact and soluble; fibrous proteins (collagen) are long, insoluble and strong.
  • Haemoglobin: four polypeptides, each with a haem prosthetic group holding Fe²⁺; one O2 per haem.

Mission 5

  • Each inorganic ion has a specific role that no other ion can fill.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Biological molecules (part 2) for OCR A-level Biology. 🎉

  1. Mission 1Oily molecules avoid water, yet they wrap every cell in a thin film. How does that film build itself?
  2. Mission 2Every protein in your body is built from just twenty building blocks. How can so few make so many?
  3. Mission 3A protein is only a chain of amino acids. So how does it fold into the exact shape its job needs?
  4. Mission 4A tendon protein is tough as rope, a blood protein dissolves. Both are amino acid chains. Why so different?
  5. Mission 5Why can a shortage of one simple charged particle stop a cell, or a whole plant, from working properly?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to A-Level Biology · OCR