← A-Level Biology · OCR · A-Level Biology revision
⭐ 0
OCR A-level Biology A (H420) · 2.1.2 Biological molecules (part 1 of 2)
Mini-Lesson

Biological molecules (part 1)

6 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1Why does salt vanish into water while oil sits on top in a separate layer?
  2. Mission 2How can weak attractions between molecules hold up an insect and keep a lake's temperature steady?
  3. Mission 3Every time your cells build a big molecule, they make water. Why?
  4. Mission 4Glucose and fructose are built from exactly the same atoms. So what makes them different sugars?
  5. Mission 5Starch and cellulose are both chains of glucose. Why can one feed you while the other builds a tree?
  6. Mission 6Why is butter solid but olive oil runny, when both are made of the same kind of molecule?
Mission 1

Mission 1: Why does salt vanish into water while oil sits on top in a separate layer?

Make a guess: Why does salt vanish into water while oil sits on top in a separate layer?

Mission 1

The medium for life

  • Water is the most abundant molecule in cells: about 70% of a typical cell's mass.
  • Most reactions of life happen in aqueous solution (dissolved in water).
  • Every one of those properties starts with the shape and charges of one small molecule.
Mission 1

A polar molecule

Polar water moleculeOHHshared electron pairδ−δ+δ+104.5°δ+ endδ− endoverall neutral
  • Each O–H bond is covalent: a pair of electrons is shared.
  • Oxygen attracts the shared electrons more strongly than hydrogen does.
  • Unequal sharing makes a polar covalent bond: oxygen is δ−, each hydrogen δ+.
  • The molecule is bent (about 104.5°), so the charges do not cancel. Water is a dipole: a δ− end and a δ+ end.
  • Overall, the molecule is neutral.
  • Say: "partial charges (δ+, δ−)" — not: "water is made of ions".
Mission 1

Hydrogen bonds

Hydrogen bonds between water moleculesOHHOHHOHHOHHOHHδ−δ+δ+δ−δ+δ+δ−δ+δ+δ−δ+δ+δ−δ+δ+covalent bond (within)hydrogen bond (between)
  • The δ+ hydrogen of one molecule is attracted to the δ− oxygen of another molecule: a hydrogen bond.
  • Hydrogen bonds are between molecules. The O–H bonds within a molecule are covalent.
  • Each hydrogen bond is weak, much weaker than a covalent bond. In liquid water they constantly break and re-form.
  • One molecule can hydrogen-bond to up to four neighbours. Millions of weak bonds add up to a strong effect.
  • Say: "hydrogen bond between water molecules" — not: "the hydrogen bond between H and O in the molecule".
Quick check
?Why is each covalent bond between oxygen and hydrogen in a water molecule polar?
Quick check
Model of three water molecules. Each is drawn as an O atom joined by solid lines to two H atoms, in a bent shape. Each OOHHOHHOHHδ−δ−δ−δ+δ+δ+δ+δ+δ+12
?The model shows three water molecules. The symbols δ+ and δ− show partial charges. Which statement correctly describes the interaction labelled 2 in the model?
Mission 1

Why some things dissolve and others don't

Dissolving(a) Ions: hydrophilicOHHOHHOHHOHHNa+OHHOHHOHHOHHCl−O (δ−) faces Na⁺H (δ+) faces Cl⁻arrows: attraction, not hydrogen bonds(b) Polar molecule (glucose): hydrophilicOOHOHOHOHCH2OHOHHOHHOHHOHHH bond(c) Oil: hydrophobicoil (non-polar)OHHOHHOHHOHHOHHOHHOHHOHH
  • Ions (e.g. Na⁺, Cl⁻): water's δ− oxygens face cations; its δ+ hydrogens face anions. Each ion is surrounded by water and separates from the crystal.
  • Polar molecules (e.g. glucose, with many –OH groups): form hydrogen bonds with water.
  • Charged and polar substances are hydrophilic: they dissolve.
  • Non-polar molecules (e.g. oils): no charges to attract water. Water molecules stay hydrogen-bonded to each other and exclude them. They are hydrophobic.
  • Dissolving is physical: molecules stay whole; no covalent bonds break.
  • Say: "ions are attracted to the partial charges of water" — not: "ions form hydrogen bonds with water".
Mission 1

The solvent at work

  • Metabolism: reactants dissolved in the cytoplasm can move and collide. Most enzymes catalyse reactions in aqueous solution.
  • Transport: dissolved substances are carried in a moving stream of water.
  • Animals: blood plasma carries glucose, amino acids, ions and urea.
  • Plants: xylem sap carries mineral ions; phloem sap carries sucrose.
  • Prokaryote: a bacterium absorbs dissolved nutrients from the water around it across its cell surface membrane. Eukaryote: a mammal's plasma carries glucose to every tissue.
Quick check
?Glucose is carried dissolved in blood plasma and in phloem sap, and it is broken down by enzymes in the aqueous cytoplasm. Which property of glucose makes this possible?
Mission check

?In blood plasma, glucose travels freely dissolved. Cholesterol does not: it travels inside lipoprotein particles whose outer surface carries polar and charged groups. Why does cholesterol need this carrier?
Mission 2

Mission 2: How can weak attractions between molecules hold up an insect and keep a lake's temperature steady?

Make a guess: How can weak attractions between molecules hold up an insect and keep a lake's temperature steady?

Mission 2

Cohesion and surface tension

Surface tensionpond skaterwatersurfacetensionzoom insurface molecule: sideways and downinside molecule: all directionscohesion (hydrogen bonds)
  • Cohesion: water molecules attract each other by hydrogen bonds.
  • At the surface, molecules are pulled inwards and sideways, not outwards.
  • Result: surface tension. The surface resists breaking, like a stretched film.
  • A pond skater stands on the surface without breaking it, held up by surface tension: a habitat on the water surface.
  • Say: "cohesion" for water attracted to water — not: for water attracted to anything else.
Mission 2

Pulled up the xylem

Cohesion-tensionxylemair outsidestomaair spacewater vapourtensionpulled uptensionxylemcontinuouswater columnOHHOHHOHH
  • (1) Water evaporates from the walls of leaf cells and diffuses out of the stomata: transpiration.
  • (2) Water is drawn out of the xylem to replace it, through the cell walls. This puts the xylem water under tension.
  • (3) Cohesion keeps the column continuous: hydrogen-bonded molecules are pulled up as one unbroken unit.
  • This is the cohesion–tension mechanism.
  • Xylem vessels are dead. No ATP is used: the energy comes from the Sun evaporating water.
  • Say: "water is pulled up under tension" — not: "water is pushed up from the roots".
Quick check
?Transpiration puts the column of water in a xylem vessel under tension. Why does the column not break as it is pulled upwards?
Mission 2

A temperature buffer

Heat capacity: air and water temperature through a day010203006121824airwaterillustrative dataTemperature / °CTime of day / h
  • Specific heat capacity: energy needed to raise 1 kg by 1 °C. Water: about 4200 J kg⁻¹ °C⁻¹.
  • That is high: about 4 times that of air, per kilogram.
  • Why: much of the energy goes into breaking hydrogen bonds, not into making molecules move faster.
  • So water's temperature changes slowly. Lakes and seas are stable habitats.
  • Bodies are mostly water, so body temperature is buffered too: enzymes stay near their optimum.
  • Say: "temperature changes slowly / stays stable" — not: "water keeps things warm".
Mission 2

Worked example: cooling by evaporation

  • To evaporate, a molecule must break all its hydrogen bonds. That takes a lot of energy.
  • Latent heat of vaporisation at body temperature: about 2400 J g⁻¹.
  • Energy comes from the skin, so the skin cools. Sweating (mammals) and transpiration (plants) use this.
  • Example (illustrative data): a runner must lose 1200 kJ of heat by sweating.
  • Mass of sweat = 1 200 000 J ÷ 2400 J g⁻¹ = 500 g, about half a litre.
  • Compare: warming 1 g of water by 1 °C takes only 4.2 J. Evaporating it takes 2400 J: about 570 times as much.
  • Big cooling effect, little water lost.
  • Water as a coolant: eukaryote examples are sweating mammals and transpiring leaves.
Quick check
?(Illustrative data.) Over a clear spring day and night, the air above a lake varies between 2 °C and 18 °C, but the lake water 1 m below the surface stays between 7 °C and 8 °C. Which explanation of the stable water temperature is correct?
Mission 2

Water as a habitat

Ice floatsice floatsliquid waterabout 4 °C: densestfishalgaezoom in on the moleculeseach bonded to 4closer packediceliquid water
  • Water is densest at about 4 °C. Ice is less dense and floats.
  • In ice, each molecule is hydrogen-bonded to four others in an open lattice: molecules are further apart.
  • Floating ice insulates the water below. Lakes freeze from the top down.
  • Prokaryotes (e.g. cyanobacteria) and eukaryotes (algae, fish) stay active in liquid water under the ice.
  • High specific heat capacity keeps aquatic temperatures stable; surface tension supports surface insects.
Mission check

?In a transpiring tree, an air bubble forms in one xylem vessel and fills a short length of it. Water in that vessel stops rising, although neighbouring vessels keep working. Which explanation is correct?
Mission 3

Mission 3: Every time your cells build a big molecule, they make water. Why?

Make a guess: Every time your cells build a big molecule, they make water. Why?

Mission 3

One chemistry for all life

ElementscarbohydrateCHOlipidCHOphospholipidPproteinCHONSnucleic acidCHONPC, H and O in all four
  • Four groups of biological molecules: carbohydrates, lipids, proteins, nucleic acids.
  • C, H and O are in all four, and are the most common elements in them.
MoleculesElements
CarbohydratesC, H, O
LipidsC, H, O (phospholipids also P)
ProteinsC, H, O, N, S
Nucleic acidsC, H, O, N, P
  • Cells cannot make atoms. Every N, P and S atom must be taken in from the environment.
  • Say: "S in proteins, P in nucleic acids" — not: the other way round.
Quick check
?Four substances, W, X, Y and Z, were purified from a cell. They are a carbohydrate, a protein, a nucleic acid and a phospholipid, in no particular order. The table shows the elements present in each. Which substance is the nucleic acid?
SubstanceElements present
WC, H, O
XC, H, O, N, S
YC, H, O, N, P
ZC, H, O, P
Mission 3

Monomers and polymers

Monomer to polymermonosaccharidepolysaccharideRRRRRamino acidpolypeptidenucleotidepolynucleotidenot a polymerone glycerol, 3 tailstriglyceride
  • Monomer: a small unit from which larger molecules are made.
  • Polymer: a large molecule made of many monomers joined together.
MonomerPolymer
Monosaccharide (e.g. glucose)Polysaccharide (starch, glycogen, cellulose)
Amino acidPolypeptide (protein)
NucleotidePolynucleotide (DNA, RNA)
  • Triglycerides are built the same way, but are not polymers: one glycerol + three fatty acids, not a repeating chain.
Mission 3

Condensation: building

Condensation and hydrolysisOHHOOcondensationH2OO+ H2OhydrolysisOHHO
  • Condensation: joins two molecules with a new covalent bond and eliminates a molecule of water.
  • One monomer loses an –OH, the other an –H. Together: H2O.
  • One water per bond formed.
  • Repeat: monomer → dimer → polymer.
  • Cells use enzymes for each joining reaction.
Mission 3

Hydrolysis: breaking

Condensation and hydrolysisOHHOOcondensationH2OO+ H2OhydrolysisOHHO
  • Hydrolysis: breaks a covalent bond between two molecules and uses a water molecule.
  • The water is split: –H goes to one product, –OH to the other.
  • One water per bond broken.
  • Digestion is hydrolysis. Enzymes make it fast; polymers in plain water break down extremely slowly.
  • Say: "condensation releases water; hydrolysis uses water" — not: the other way round.
Quick check
?Two monosaccharides are joined by a condensation reaction to form a disaccharide. What happens in this reaction?
Mission 3

Worked example: counting the water

  • Bonds sit between monomers. An unbranched chain of n monomers has n − 1 bonds.
  • So building it releases n − 1 water molecules; hydrolysing it uses n − 1.
  • Example: 5 glucose molecules joined into one unbranched chain.
  • Glucose Mr = 180; water Mr = 18.
  • Bonds: 5 − 1 = 4. Water released: 4.
  • Mr of chain = 5 × 180 − 4 × 18 = 900 − 72 = 828.
  • Hydrolysis reverses it exactly: 828 + 4 × 18 = 900.
Quick check
?A polypeptide made of 100 amino acids is completely hydrolysed into free amino acids. How many water molecules are used in the process?
Mission 3

One reaction, four kinds of bond

Four bondsglycosidic bond+ H2OOester bond+ H2Oglycerolfatty acidOCOpeptide bond+ H2Oamino acidamino acidCONHphosphodiester bond+ H2OsugarsugarOPOOO⁻
Molecules joinedBond formed by condensationMission
MonosaccharidesGlycosidic bond
Glycerol + fatty acidEster bond
Amino acidsPeptide bond
NucleotidesPhosphodiester bond
  • Every one forms by condensation and breaks by hydrolysis.
Mission check

?Seeds store starch: unbranched and branched chains of thousands of glucose units. During germination, enzymes hydrolyse the starch completely to glucose. Starting from 1.00 g of starch, about what mass of glucose forms?
  • Glucose Mr = 180; water Mr = 18.
Mission 4

Mission 4: Glucose and fructose are built from exactly the same atoms. So what makes them different sugars?

Make a guess: Glucose and fructose are built from exactly the same atoms. So what makes them different sugars?

Mission 4

Single sugars

Sugar familytriose3 Cpentose5 Cribosedeoxyribosehexose6 Cglucosefructosegalactoseall C6H12O6
  • A monosaccharide is a single sugar unit: the monomer of carbohydrates.
  • Named by number of carbon atoms: triose (3 C), pentose (5 C), hexose (6 C).
  • Hexoses: glucose, fructose, galactose. Pentoses: ribose (in RNA and ATP), deoxyribose (in DNA).
  • Glucose and fructose are both C6H12O6: same atoms, arranged differently. They are isomers.
Mission 4

Rings: count every carbon

Ring countingOOHOHOHOHCH2OH123456glucoseOOHOHOHCH2OH12345riboseOOHOHOHCH2OH23456CH₂OH1fructose(five-membered ring)
  • In water, pentoses and hexoses exist mostly as rings.
  • Glucose: ring of 5 C + 1 O. Carbon 6 sits outside the ring, in a CH2OH group.
  • Ribose: ring of 4 C + 1 O. Carbon 5 sits outside.
  • Fructose (as in sucrose): ring of 4 C + 1 O, with two carbons outside.
  • So ring size does not tell you the sugar type. Count all the carbons.
  • In glucose, number the carbons from the one to the right of the ring O: C1, C2 … (In fructose, C1 is outside the ring.)
Quick check
?Two monosaccharides, P and Q, are drawn in their ring forms. In P the ring is made of four carbon atoms and one oxygen atom, with one further carbon atom (in a CH2OH group) attached outside the ring. In Q the ring is also made of four carbon atoms and one oxygen atom, but two further carbon atoms (each in a CH2OH group) are attached outside the ring. How should P and Q be classified?
Mission 4

α-glucose and β-glucose

Alpha and beta glucoseOOHHOHOHOHCH2OH123456α-glucosebelowOOHHOHOHOHCH2OH123456β-glucoseaboveABBA: alpha below, beta above
  • Two forms of glucose: same formula, same ring.
  • They differ only at carbon 1.
  • α-glucose: –OH on C1 points below the ring.
  • β-glucose: –OH on C1 points above the ring.
  • A tiny difference with large effects: α-glucose builds starch and glycogen; β-glucose builds cellulose (see Mission 5).
  • Say: "the –OH on carbon 1 is inverted" — not: "β-glucose has different atoms".
Quick check
?Which statement about α-glucose and β-glucose is correct?
Mission 4

Two sugars make a disaccharide

DisaccharidesOOHOHOHCH2OH14OOHOHOHCH2OH14α-glucoseα-glucoseOHOHOH2Omaltose: 1,4-glycosidic bondhydrolysis (+ H2O)maltose=glucose+glucosesucrose=glucose+fructoselactose=glucose+galactose
  • Two monosaccharides join by condensation: a glycosidic bond forms and water is released.
  • Maltose = glucose + glucose. Two α-glucose, joined C1 to C4: a 1,4-glycosidic bond.
  • Sucrose = glucose + fructose.
  • Lactose = glucose + galactose.
  • Hydrolysis splits a disaccharide back into its monosaccharides, using water.
Quick check
?The enzyme maltase, in the small intestine, acts on maltose. Which statement describes the reaction?
Mission 4

Glucose: built for transport and fuel

  • Soluble: its many –OH groups hydrogen-bond with water.
  • Transportable: dissolved in blood plasma, it reaches every cell.
  • Chemically stable: it does not break down on its own; enzymes control when it is oxidised.
  • Energy yield: oxidation in respiration releases about 16 kJ per gram.
  • But soluble means osmotically active. So cells store glucose as large polysaccharides instead (see Mission 5).
  • Say: "glucose dissolves because it is polar" — not: "because it is small".
Quick check
?Which statement correctly links a property of glucose to the way it is used in organisms?
Mission check

?Galactose and glucose both have the formula C6H12O6 and both form a ring of five carbons and one oxygen. They differ only in which way the –OH on carbon 4 points. Which statement is correct?
Mission 5

Mission 5: Starch and cellulose are both chains of glucose. Why can one feed you while the other builds a tree?

Make a guess: Starch and cellulose are both chains of glucose. Why can one feed you while the other builds a tree?

Mission 5

One monomer, three polymers

  • Starch: energy store in plants.
  • Glycogen: energy store in animals and fungi.
  • Cellulose: strong walls of plant cells.
  • All three are polymers of glucose, built by condensation.
  • Units are joined by glycosidic bonds.
  • What differs: which form of glucose, and how the units are connected.
Mission 5

Starch: amylose and amylopectin

Storage polysaccharidesamylosecoiled, unbranchedamylopectinbranch about every 25 unitsglycogenbranch about every 10 unitschain endsa branch point, enlargedOC6C11,6-glycosidic bond
  • Made of α-glucose.
  • Amylose: 1,4-glycosidic bonds only. Unbranched. Coils into a helix: compact.
  • Amylopectin: 1,4 bonds plus 1,6-glycosidic bonds at branch points, about every 25 units.
  • Starch grains in plant cells, e.g. potato tubers and seeds, contain both.
Mission 5

Glycogen

Storage polysaccharidesamylosecoiled, unbranchedamylopectinbranch about every 25 unitsglycogenbranch about every 10 unitschain endsa branch point, enlargedOC6C11,6-glycosidic bond
  • Made of α-glucose, like amylopectin.
  • 1,4 bonds, with 1,6 branches about every 10 units: more branched than amylopectin.
  • Very compact granules in liver and muscle cells.
  • Enzymes remove glucose only from chain ends. More branches = more ends = faster release.
  • Fits animals: they can need glucose for respiration very quickly.
Mission 5

What makes a good store

  • Compact: coiling and branching pack many glucose units into little space.
  • Relatively insoluble because the molecules are so large. So they do not draw water into the cell by osmosis.
  • Too large to leave the cell.
  • Easily hydrolysed to α-glucose when energy is needed; easily built up again by condensation.
  • Say: "relatively insoluble because they are so large" — not: "insoluble because they are non-polar".
Quick checkRead the data
Line graph of monosaccharide released (mg), axis marked 0, 20, 40, 60, 80, 100, 120, against time (min), axis marked 0, 051015202530020406080100120Time / minMonosaccharide released / mgB / branchedL / linear
?Equal masses of two polysaccharides, B (branched) and L (linear), both built from the same monosaccharide, were each mixed with an enzyme that removes monosaccharides one at a time from the free ends of chains. The graph shows the mass of monosaccharide released over 30 minutes (illustrative data). Which statement correctly describes the data?
Quick check
?Liver cells store glucose in the form of glycogen. Why is the glucose not simply stored as free glucose?
Mission 5

Cellulose

CelluloseOOHOHOHCH2OHOOHOHOHCH2OHOβ-glucoseβ-glucose, turned over1,4 link: CH₂OH up, then downOCH2OHOCH2OHOCH2OHOCH2OHOCH2OHOCH2OHstraight, unbranched chainmicro-fibrilH bonds between chainsfibres in a cell wall
  • (1) Made of β-glucose. To form each 1,4-glycosidic bond, every other unit is inverted (rotated 180°).
  • (2) The alternating units give straight, unbranched chains.
  • (3) Straight chains lie side by side, linked by many hydrogen bonds between their –OH groups: microfibrils.
  • Microfibrils group into fibres with high tensile strength.
  • Cell walls resist stretching, so plant cells can become turgid without bursting.
  • Say: "hydrogen bonds between chains" — not: "covalent cross-links" or "coiled like starch".
Quick check
?Cellulose gives plant cell walls high tensile strength. Which feature of cellulose is responsible for this?
Mission 5

Side by side

AmyloseAmylopectinGlycogenCellulose
Monomerα-glucoseα-glucoseα-glucoseβ-glucose
Bonds1,41,4 and 1,61,4 and 1,61,4
ShapeHelixBranchedHighly branchedStraight chains, H-bonded
JobPlant storePlant storeAnimal storePlant cell wall
  • Same monomer. Different form of glucose, different bonds, different shape, different job.
Mission check

?Humans make amylase, which hydrolyses the 1,4-glycosidic bonds between α-glucose units in starch. Humans make no enzyme that hydrolyses cellulose, which also has 1,4-glycosidic bonds between glucose units. Which explanation is best?
Mission 6

Mission 6: Why is butter solid but olive oil runny, when both are made of the same kind of molecule?

Make a guess: Why is butter solid but olive oil runny, when both are made of the same kind of molecule?

Mission 6

What makes a lipid

  • Lipids dissolve in non-polar solvents but only sparingly in water.
  • Mostly non-polar C–H bonds: few δ+ or δ− regions to attract water. They are hydrophobic.
  • Lipids include fats, oils, waxes, phospholipids and steroids.
  • Say: "insoluble because non-polar" — not: "because the molecules are large" or "because they are lighter than water".
Mission 6

Building a triglyceride

Triglyceride formationfatty acidsglycerolRCOCH2OOHHH2ORCOCHOOHHH2ORCOCH2OOHHH2Oester bond+ 3 H2Ohydrolysis (+ 3 H2O)
  • (1) Glycerol has three –OH groups. A fatty acid is a hydrocarbon chain (R) with a –COOH group: RCOOH.
  • (2) Condensation: the –COOH of a fatty acid reacts with an –OH of glycerol. An ester bond forms; water is released.
  • (3) Three times: one glycerol + three fatty acids → one triglyceride + 3 H2O.
  • Forming an ester bond is esterification.
  • Hydrolysis breaks the ester bonds, releasing glycerol and three fatty acids (e.g. lipase in digestion).
  • A triglyceride is not a polymer.
  • Say: "one glycerol and three fatty acids" — not: "three glycerols and one fatty acid".
Quick check
?One glycerol molecule and three fatty acid molecules react by condensation to form one triglyceride. How much water is produced?
Mission 6

Saturated and unsaturated

Fatty acid chainssaturated: single C–C onlyOHOmonounsaturated: one C=COHOkink at C=C
  • Saturated: only single C–C bonds. Every carbon holds as many H atoms as it can: saturated with hydrogen.
  • Unsaturated: at least one C=C double bond.
  • In natural fats, each C=C puts a kink in the chain. Saturated chains are straight.
  • Only C=C in the chain counts. The C=O in –COOH does not make a fatty acid unsaturated.
  • Say: "saturated with hydrogen" — not: "full of double bonds".
Mission 6

Kinks and melting points

Packingat 20 °Cfat: solide.g. butteroil: liquide.g. olive oilsame tail length in both
  • Straight saturated chains pack closely: strong attractions between molecules → higher melting point.
  • Kinked unsaturated chains cannot pack closely: weaker attractions → lower melting point.
  • Rich in saturated fatty acids: fat, solid at room temperature (butter).
  • Rich in unsaturated fatty acids: oil, liquid at room temperature (olive oil).
  • Melting breaks no covalent bonds. Molecules just move apart.
Quick checkRead the data
Line graph of melting point (°C), axis marked −20, 0, 20, 40, 60, 80, against number of double bonds in the chain, marke0123−20020406080Number of double bonds in the chainMelting point / °C
?The graph shows the approximate melting points of four fatty acids. Each has a chain of 18 carbon atoms; they differ only in the number of double bonds between carbon atoms in the chain. Which statement is best supported by the data?
Mission 6

A dense energy store

Energy per gram010203040about 37triglycerideabout 17carbohydrateEnergy released / kJ g⁻¹lipid dropletthin rim ofcytoplasmnucleusadipose cell
  • Oxidising triglycerides releases about 37 kJ g⁻¹; carbohydrate about 17 kJ g⁻¹. About twice as much per gram.
  • Why: long hydrocarbon chains, rich in C–H bonds, with little oxygen.
  • Insoluble: no osmotic effect, and stored without the water that glycogen holds.
  • So a lot of energy fits in a small, light store: adipose tissue in animals, oil droplets in seeds.
  • Prokaryotes too: some bacteria (e.g. Rhodococcus) store triglyceride droplets. Eukaryotes: mammal adipose tissue, sunflower seed oil.
  • Say: "energy is released when fatty acids are oxidised in respiration" — not: "energy is stored in the ester bonds".
Mission check

?To make a spread, manufacturers react a liquid vegetable oil with hydrogen, using a catalyst. Some C=C double bonds in its fatty acid chains become C–C single bonds. How does the oil change?
Recap

The big ideas

Mission 1

  • Unequal sharing of electrons makes water polar (δ− O, δ+ H); hydrogen bonds form between molecules.
  • Charged and polar substances dissolve (hydrophilic); non-polar ones are excluded (hydrophobic). That makes water the medium for metabolism and transport.

Mission 2

  • Hydrogen bonds give cohesion (surface tension; unbroken xylem columns) and a high specific heat capacity (stable temperatures).
  • Evaporation must break hydrogen bonds: a large cooling effect for little water lost.

Mission 3

  • Monomers join by condensation (one water released per bond) and polymers are split by hydrolysis (one water used per bond).
  • C, H, O in all four groups; N and S in proteins; N and P in nucleic acids.

Mission 4

  • Monosaccharides are named by their carbons (triose, pentose, hexose); isomers share a formula but not an arrangement; α- and β-glucose differ only at carbon 1.
  • Condensation of two monosaccharides forms a glycosidic bond: maltose (glucose + glucose), sucrose (glucose + fructose), lactose (glucose + galactose).

Mission 5

  • α-glucose → starch (amylose helix; branched amylopectin) and glycogen (highly branched): compact, insoluble stores. β-glucose → straight cellulose chains hydrogen-bonded into microfibrils: strength.

Mission 6

  • A triglyceride is one glycerol + three fatty acids joined by ester bonds (three condensations); hydrophobic, energy-dense store.
  • Saturated chains are straight and pack closely (fats, higher melting point); C=C kinks unsaturated chains (oils, lower melting point).
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Biological molecules (part 1) for OCR A-level Biology. 🎉

  1. Mission 1Why does salt vanish into water while oil sits on top in a separate layer?
  2. Mission 2How can weak attractions between molecules hold up an insect and keep a lake's temperature steady?
  3. Mission 3Every time your cells build a big molecule, they make water. Why?
  4. Mission 4Glucose and fructose are built from exactly the same atoms. So what makes them different sugars?
  5. Mission 5Starch and cellulose are both chains of glucose. Why can one feed you while the other builds a tree?
  6. Mission 6Why is butter solid but olive oil runny, when both are made of the same kind of molecule?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to A-Level Biology · OCR