← A-Level Biology · Eduqas · A-Level Biology revision
⭐ 0
Eduqas A-level Biology (A400QS) · Component 1 (Energy for Life) 4: Microbiology
Mini-Lesson

Microbiology

2 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1How do you grow bacteria on purpose without growing anything else, or infecting yourself?
  2. Mission 2Bacteria can go from a handful to billions overnight. How do you count them, and how do you graph that?
Mission 1

Mission 1: How do you grow bacteria on purpose without growing anything else, or infecting yourself?

Make a guess: How do you grow bacteria on purpose without growing anything else, or infecting yourself?

Mission 1

What bacteria need

Growth needsnutrients(C and N sources, minerals)watertemperature(optimum)pH (near 7)oxygen?obligate aerobefacultative anaerobeobligate anaerobe
  • Nutrients: a carbon source (e.g. glucose) for respiration and for building molecules.
  • A nitrogen source (e.g. amino acids, nitrate) for proteins and nucleic acids; plus minerals.
  • Water: for reactions and transport into the cell.
  • A suitable temperature: growth depends on enzymes, each with an optimum.
  • A suitable pH: most bacteria grow best near neutral.
  • Oxygen: obligate aerobes need it; facultative anaerobes grow with or without it; obligate anaerobes are harmed by it.
Mission 1

Agar or broth

Mediabeforeclearafterturbiditybrothcolonieslawnstreak plate
  • Nutrient broth: liquid medium. Growth shows as cloudiness (turbidity).
  • Nutrient agar: broth set with agar, a seaweed polysaccharide most bacteria cannot digest.
  • Agar melts near 85 °C and sets below about 40 °C: poured hot, solid at incubation temperature.
  • On agar, one cell (or a small clump) grows into a visible colony.
  • Spread culture evenly over the agar: colonies merge into a lawn.
  • Streak plate: streak in sections, flaming the loop between them. Cells thin out to single colonies: a pure culture.
Mission 1

Aseptic technique

Aseptic technique1 Beforewash handsdisinfect benchautoclave121 °C, 15 min2 Duringupdraughtbottle neckin flameloop red hotlid raised at an angle3 Aftertwo short stripsof tape, not all round25 °Clabel on baseupside down
  • Two aims: keep unwanted microbes out of the culture; keep the culture away from people.
  • Before: wash hands; disinfect the bench; sterilise media and glassware in an autoclave (121 °C, 15 min).
  • During: work beside a lit Bunsen burner: its updraught carries airborne microbes up and away.
  • Flame the inoculating loop until red hot; cool it before touching the culture.
  • Flame the neck of each bottle as you open and close it. Lift the dish lid only slightly, at an angle.
  • After: secure the lid with two short strips of tape, not all round: air can still enter, which discourages anaerobic bacteria (including many pathogens).
  • Label the base. Incubate upside down (condensation cannot drip onto the agar) at 25 °C. School labs avoid 30–42 °C: temperatures near body heat (37 °C) favour human pathogens.
  • Never open a plate after incubation. Autoclave cultures before disposal.
Mission 1

Serial dilution

Serial dilutionculture9.0 cm³sterilewater9.0 cm³sterilewater9.0 cm³sterilewater9.0 cm³sterilewater1.0 cm³1.0 cm³1.0 cm³1.0 cm³10−1× 1/1010−2× 1/1010−3× 1/1010−4× 1/10
  • Transfer 1.0 cm³ into 9.0 cm³ of sterile water; mix. Total 10 cm³: a 1 in 10 dilution (10⁻¹).
  • Repeat from the new tube: 10⁻², 10⁻³, 10⁻⁴ …
  • Dilution factor = total volume ÷ volume transferred = 10 ÷ 1 = 10.
  • After k tenfold steps, concentration = original × 10⁻ᵏ. Factors multiply; they never add.
  • A fresh sterile pipette for each transfer: no carry-over between tubes.
  • Uses later: diluting a culture until colonies can be counted (see Mission 2).
Quick check
?A student adds 1.0 cm³ of a bacterial culture to 9.0 cm³ of sterile water and mixes. She transfers 1.0 cm³ of this into a second 9.0 cm³ of sterile water, and repeats until she has made four dilutions. What fraction of the original concentration of bacteria is in the fourth dilution?
Mission check

?A student plans to test three disinfectants on a lawn of bacteria in Petri dishes. Which plan for incubating the dishes follows safe aseptic practice?
Mission 2

Mission 2: Bacteria can go from a handful to billions overnight. How do you count them, and how do you graph that?

Make a guess: Bacteria can go from a handful to billions overnight. How do you count them, and how do you graph that?

Mission 2

Counting what you cannot see

Ways to countviable countliving cells
  • Too many cells to count. So count a tiny, known sample, then scale up.
  • Viable count: counts living cells only. Each colony is taken to come from one living cell.
Mission 2

Viable count: dilute, plate, count

Dilute, plate, count10−410−510−60.1 cm³0.1 cm³0.1 cm³spreader41247530–300: count this one
  • Serially dilute the culture (see Mission 1): 10⁻¹, 10⁻², … 10⁻⁶.
  • Spread plate: 0.1 cm³ spread over agar with a sterile spreader.
  • Pour plate: 1.0 cm³ mixed with molten agar cooled to about 45 °C.
  • Incubate. Count only plates with 30–300 colonies: fewer gives large chance error; more and colonies merge.
  • Assume: each colony grew from one living cell.
  • Cells per cm³ = colonies × dilution factor ÷ volume plated (cm³).
Mission 2

Worked example: a viable count

  • 0.1 cm³ of each dilution was spread (illustrative data):
DilutionColonies
10⁻⁴412
10⁻⁵47
10⁻⁶5
  • Step 1: choose the plate with 30–300 colonies: 10⁻⁵, 47 colonies.
  • Step 2: undo the dilution: 47 × 10⁵ = 4.7 × 10⁶ cells in 0.1 cm³.
  • Step 3: per cm³: 4.7 × 10⁶ ÷ 0.1 = 4.7 × 10⁷ cells per cm³.
  • Check: the 10⁻⁶ plate predicts about 4.7 colonies; it had 5. Consistent.
Quick check
?A student spreads 0.2 cm³ of the 10⁻³ dilution of a culture onto agar. After incubation there are 86 colonies. What is the number of living cells per cm³ in the original culture?
Mission 2Practical

Bacteria in fresh and stale milk

Dilute, plate, count10−410−510−60.1 cm³0.1 cm³0.1 cm³spreader41247530–300: count this one
  • Specified practical: the number of bacteria in fresh and stale milk, by serial dilution, plating and counting colonies.
  • Same milk, two samples: fresh, and left at room temperature for some days.
  • Serially dilute each in sterile water. Plate the same volume of each dilution.
  • Incubate (25 °C), then count plates with 30–300 colonies. Calculate cells per cm³ of milk.
  • Treat stale milk as a possible source of pathogens: full aseptic technique.
  • Counts may differ by several powers of ten: compare them on a log scale.
Mission 2

Growth on a log scale

Log scale06121824time / h00.51.0cells per cm³ (× 10⁹)06121824time / h23456789log₁₀(cells per cm³)laglogstationarydeathIllustrative data
  • Microbe numbers span many orders of magnitude: 10² to 10⁹ per cm³.
  • On an ordinary axis, the early points squash flat against zero.
  • On a log10 scale, each equal step is × 10. log10(10⁶) = 6.
  • Closed culture phases: lag, log (exponential), stationary, death (decline).
  • Exponential growth plots as a straight line on a log scale.
  • Say: "exponential: multiplied by the same factor each interval" — not: "the same number added each interval".
Mission 2

Worked example: doublings and logs

  • N = N0 × 2ⁿ. N0 = starting number; n = number of generations.
  • N0 = 2.0 × 10³ cells per cm³; one generation every 25 min; 5 h of log phase.
  • Step 1: n = 300 min ÷ 25 min = 12.
  • Step 2: 2¹² = 4096 (calculator: 2 xʸ 12).
  • Step 3: N = 2.0 × 10³ × 4096 = 8.2 × 10⁶ cells per cm³.
  • On a log10 axis: 3.30 → 6.91. Each generation adds log102 = 0.301; 12 × 0.301 = 3.61. ✓
Quick check
?A student records the size of a duckweed population every two days and plots it on a logarithmic vertical axis against time on a non-logarithmic horizontal axis. Which observation would show that growth was exponential?
Mission check

?A bacterial culture is in its log phase. Plotted on a log10 scale, its count rises in a straight line from 10³ to 10⁶ cells per cm³ over 3 hours. Approximately how long does one generation take?
Recap

The big ideas

Mission 1

  • Bacteria need nutrients, water, a suitable temperature and pH; aseptic technique keeps contaminants out and the culture contained.
  • Serial dilution multiplies the dilution factor at each step: four tenfold steps give 10⁻⁴.

Mission 2

  • Viable count = colonies × dilution factor ÷ volume plated, from a plate with 30–300 colonies.
  • On a log10 scale, exponential growth is a straight line; each generation adds 0.301 (N = N0 × 2ⁿ).
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Microbiology for Eduqas A-level Biology. 🎉

  1. Mission 1How do you grow bacteria on purpose without growing anything else, or infecting yourself?
  2. Mission 2Bacteria can go from a handful to billions overnight. How do you count them, and how do you graph that?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to A-Level Biology · Eduqas