← A-Level Biology Β· AQA Β· A-Level Biology revision
⭐ 0
AQA A-level Biology (7402) Β· 3.7 Genetics, populations, evolution and ecosystems (A-level only) (part 3 of 3)
Mini-Lesson

Genetics, populations and ecosystems (part 3)

5 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1Why does a population that doubles again and again eventually stop growing?
  2. Mission 2Why do members of the same species often compete harder with each other than with any other species?
  3. Mission 3How can losing a few otters turn a forest of seaweed into bare rock?
  4. Mission 4How can you know how many snails live in a whole wood without finding every single one?
  5. Mission 5Bare rock can turn into forest without anyone planting a single tree. How does that happen?
Mission 1

Mission 1: Why does a population that doubles again and again eventually stop growing?

Make a guess: Why does a population that doubles again and again eventually stop growing?

Mission 1

Four ways numbers change

  • Births and immigration add individuals. Deaths and emigration remove them.
  • Change in population = (births + immigrants) βˆ’ (deaths + emigrants).
Quick check
?A newt population starts the year at 500. During the year there are 120 births, 80 deaths, 15 immigrants and 35 emigrants. What is the population at the end of the year?
Mission 1

Exponential growth

Exponential growthIllustrative data08162432012345time / hours+1+2+4+8+16thousand added each hourpopulation size / thousands
  • Few individuals, plentiful resources, weak limiting factors (little competition, predation or disease).
  • Births exceed deaths by a constant proportion of the population.
  • So the number added grows each time: 1, 2, 4, 8, 16 … A J-shaped curve.
  • Each individual does not breed faster. There are simply more individuals breeding.
Mission 1

Sigmoid growth and carrying capacity

Sigmoid curvepopulation sizetimeexponentialgrowthresources perindividual fall:births ↓, deaths ↑carrying capacitybirths = deaths
  • Real populations slow down and level off: an S-shaped (sigmoid) curve.
  • Carrying capacity: the largest population the environment's resources can support sustainably.
  • Limiting resources: food, water, light, space, nest sites, mineral ions.
  • As numbers rise, resources per individual fall. Births fall; deaths rise. At the plateau, births β‰ˆ deaths.
  • Births and deaths do not stop at the plateau: they balance.
  • Carrying capacity varies with abiotic factors, competition and predation.
Quick check
?Yeast was grown in a sealed flask of glucose solution and cell counts were made every four hours. After 24 hours the count stopped rising. Which explanation for the plateau is correct?
Mission 1

Density-dependent and density-independent factors

  • Density-dependent: affects a larger proportion of the population as it gets denser.
    • Competition for limited resources, predation, disease and parasites spread faster when crowded.
  • Density-independent: affects a similar proportion whatever the density.
    • Frost, drought, flood, fire, storms.
  • Biotic factors are usually density-dependent; abiotic factors such as weather are usually density-independent.
  • Say: "a storm kills the same proportion" β€” not: "density-dependent because it killed so many".
Quick check
?A storm kills 30% of a seabird colony. Over the following years, the colony returns to its former size. Which explanation is correct?
Mission 1Read the data

Yeast in a flask

Carlson's yeast0100200300400500600700024681012141618time / hamount of yeast(relative units)Data: Carlson (1913), from Pearl (1927)

Real data: Carlson (1913), reproduced by Pearl (1927). Amount of yeast in a culture (relative units):

Time (h)024681012141618
Amount9.629.071.1174.6350.7513.3594.8640.8655.9661.8
  • Early on, the amount at least doubles every two hours: close to exponential.
  • Later, each two hours adds less and less. The amount levels off near 660.
Quick check
?Use the yeast data above. In which two-hour interval did the amount of yeast increase most?
Mission check

?In 1911, 25 reindeer were introduced to St Paul Island, Alaska, where they had almost no predators. By 1938 there were about 2000; by 1950 only 8 remained, after the lichens they ate in winter had been destroyed. How should this be interpreted in relation to the sigmoid growth model?
Mission 2

Mission 2: Why do members of the same species often compete harder with each other than with any other species?

Make a guess: Why do members of the same species often compete harder with each other than with any other species?

Mission 2

Two kinds of competition

  • Competition: individuals use the same resource, and it is in limited supply.
  • Intraspecific: between members of the same species. They need exactly the same food, light, water, space, nest sites and mates.
  • Interspecific: between different species whose needs overlap.
  • No fight is needed. Seedlings shading each other are competing.
  • Both help set the population a habitat can support: its carrying capacity.
  • Say: "competition for a limited resource" β€” not: "competition means fighting".
Quick check
?Why does competition occur between members of the same population?
Mission 2

What competition does to growth curves

Competition on growth curvespopulation sizetimeX aloneXYX aloneY aloneXcompetitiveexclusion
  • Intraspecific competition rises with density. It is what bends the curve into a plateau at carrying capacity.
  • Interspecific, grown together: each species may level off lower than when alone.
  • Or one keeps rising while the other falls to zero: competitive exclusion (Gause's Paramecium).
  • Remove a competitor: the other population rises to a new, higher plateau. It does not grow for ever.
Mission 2Read the data

Crowded plants

Density and seedsIllustrative data02040608010012014004 0008 00012 0000100200300400plants per m2mean seeds per planttotal seeds per m2

Illustrative data. Plots of one cereal crop sown at different densities, all given the same water and fertiliser:

Plants per mΒ²2550100200400
Mean seeds per plant120110804825
Total seeds per mΒ²300055008000960010 000
  • Total seeds per mΒ² = plants per mΒ² Γ— mean seeds per plant.
Quick check
?Use the crowded-plants data above. Which conclusion is best supported?
Quick check
?When a competing species is removed from a habitat, the population of the remaining species often increases. Which statement best explains why?
Mission check

?A forester plants beech seedlings very close together in a cleared plot with no other plant species. Over ten years, most of the seedlings die and the survivors are tall and spaced out. Which explanation is best?
Mission 3

Mission 3: How can losing a few otters turn a forest of seaweed into bare rock?

Make a guess: How can losing a few otters turn a forest of seaweed into bare rock?

Mission 3

Predator and prey numbers rise and fall together

Predator-prey cyclenumber of animalstimepreypredatorlaglag
  • Prey plentiful β†’ more predators survive and breed. Predator numbers rise, a little later.
  • More predators β†’ more prey eaten. Prey numbers fall.
  • Less food β†’ predators starve and breed less. Predator numbers fall.
  • Fewer predators β†’ prey recover. The cycle repeats.
  • The predator peak lags the prey peak: breeding and starving take time.
  • Case study: snowshoe hare and Canada lynx, Canada. Fur-trade records show a cycle of about 10 years.
  • Effects pass down a food chain. Where sea otters were hunted out, the urchins they eat multiplied and grazed kelp forests to bare rock.
Quick check
?Fur records from the Hudson's Bay Company show snowshoe hare and Canada lynx numbers rising and falling in cycles of about ten years, with each peak in lynx numbers occurring one to two years after a peak in hares. Which explanation is correct?
Mission 3Read the data

Food or foxes: what limits hares?

Krebs experiment024681012hare densitycompared with controlΓ— 1controlΓ— 2predatorsexcludedΓ— 3foodaddedΓ— 11bothif the effects wereindependent (2 Γ— 3)Data: Krebs et al. (1995), approximate ratios

Real data: Krebs and colleagues (1995), Yukon, Canada. 1 kmΒ² blocks of forest, followed for eight years. Snowshoe hare density during the peak and decline of the cycle, compared with untreated control areas:

TreatmentHare density compared with control
Predators kept out (electric fence)about Γ— 2
Extra food addedabout Γ— 3
Predators kept out and extra food addedabout Γ— 11
  • If the two effects were independent, both together would give about Γ— 6 (2 Γ— 3).
Quick check
?Use the hare data above. Which conclusion is best supported?
Mission check

?Illustrative scenario. In a woodland, owls eat voles, and voles eat tree seedlings. A disease kills most of the owls. What is the most likely effect on the tree seedlings over the next few years?
Mission 4

Mission 4: How can you know how many snails live in a whole wood without finding every single one?

Make a guess: How can you know how many snails live in a whole wood without finding every single one?

Mission 4

Why sample, and why at random

  • Counting every individual is usually impossible: too slow, organisms hidden or moving, the habitat trampled.
  • So count a sample and scale up.
  • Random sampling: every point has an equal chance of being chosen. This avoids bias.
  • The estimate still differs from the true size. That difference is sampling error. More samples reduce it; only a full count removes it.
  • Say: "random placement avoids bias" β€” not: "choose typical spots".
Mission 4

Random quadrats

Random quadrats0102030400102030tape measure / mtape measure / m(12, 27)0.5 m Γ— 0.5 mquadratpercentage cover:shaded squaresout of 100
  • For sessile or slow-moving organisms: plants, limpets, barnacles.
  • Lay two tape measures at right angles. Use random numbers as coordinates for each quadrat.
  • Measures of abundance:
    • Density: number of individuals per mΒ².
    • Frequency: % of quadrats in which the species occurs.
    • Percentage cover: % of the quadrat area it covers. Use where individuals can't be counted, e.g. grass.
Mission 4

Worked example: from quadrats to a population

  • Plantain plants in a 1200 mΒ² field. Ten random 0.5 m Γ— 0.5 m quadrats.
  • Counts: 3, 0, 5, 2, 4, 1, 6, 3, 2, 4. Total 30.
  • Mean per quadrat = 30 Γ· 10 = 3.0.
  • Quadrat area = 0.5 Γ— 0.5 = 0.25 mΒ². Density = 3.0 Γ· 0.25 = 12 per mΒ².
  • Estimate = 12 Γ— 1200 = 14 400 plants (14 000 to 2 significant figures).
Quick check
?A student places ten 0.5 m Γ— 0.5 m quadrats at random in a 250 mΒ² meadow and counts 20 orchids in total. What is the estimated population of orchids in the meadow?
Mission 4

Transects: sampling along a change

Belt transectwoodland edge2 mquadrat every 2 m along the tapelight reading at each quadratkite diagram: one speciesdistance along the transect
  • Use a transect where conditions change across the site: shore, woodland edge, sand dune, path.
  • Line transect: record every species touching a line at regular intervals.
  • Belt transect: place quadrats along the line, continuously or at regular intervals (interrupted).
  • At each quadrat, measure the abiotic factor: light intensity, soil moisture, soil pH, salinity, temperature. Sensors and data loggers help.
  • Pair each abundance value with its abiotic value. Then look for a correlation.
  • A correlation is not proof of cause. Up a shore, several factors change together.
Mission 4Practical

Distribution and an abiotic factor

  • Required practical 12: effect of a named environmental factor on the distribution of a given species.
  • Method: lay a transect across the gradient; quadrat at fixed intervals; record % cover or density; measure the factor at each quadrat.
  • Control: same quadrat size, same observer, same time of day; repeat transects.
  • Analysis: plot abundance against the factor; test the correlation (e.g. Spearman's rank; choosing tests in another lesson).
Quick checkRead the data

Sea lavender up a salt marsh

Salt-marsh data010203040506070010203040051015202530distance from seaward edge / msea lavender cover / %salinity / pptIllustrative data
?Illustrative data. A 30 m transect from the seaward edge of a salt marsh, one quadrat every 5 m:
Distance (m)051015202530
Salinity (ppt)35322824201612
Sea lavender cover (%)010356055200

Which conclusion is best supported by these data?

Mission 4

Mark, release, recapture

Mark, release, recapturewoodmarkedunmarked60 snails caught and markedpaint dot onthe undersidereleased and mixed in the woodsecond sample: 45 snails, 9 marked60 Γ— 45 Γ· 9 = 300
  • For motile animals: woodlice, snails, beetles, voles.
  • Catch a sample. Mark each one harmlessly (paint dot, shell number). Release.
  • Later, catch a second sample. Count the marked ones in it.
  • Population β‰ˆ (number marked in first sample Γ— number in second sample) Γ· number of marked in second sample.
  • Example: 60 snails marked; second sample 45, of which 9 marked. 60 Γ— 45 Γ· 9 = 300 snails.
  • Assumptions: marks don't wear off or harm the animal; marked animals mix fully back in; no births, deaths, immigration or emigration between samples; equal chance of capture.
Quick check
?In a capture–mark–release–recapture study, 40 woodlice were caught, marked and released. Later, 50 woodlice were caught, of which 10 were marked. What is the Lincoln index estimate of the population?
  • (The Lincoln index is the population estimate from mark–release–recapture data.)
Quick check
?Beetles were marked with a spot of bright paint that made them easier for birds to see. Compared with the true population size, what will the Lincoln index estimate be, and why?
Mission check

?A student estimates the number of dandelions on a school field. She places ten quadrats in the spots where she can see dandelions growing, counts carefully, and scales up by the area of the field. Which statement about her estimate is correct?
Mission 5

Mission 5: Bare rock can turn into forest without anyone planting a single tree. How does that happen?

Make a guess: Bare rock can turn into forest without anyone planting a single tree. How does that happen?

Mission 5

What succession is

Primary and secondary successionprimary successionbare rock,no soilgrassesshrubswoodland
  • Succession: change in the species making up a community, over time.
  • Primary succession: starts on bare ground with no soil: rock, cooled lava, sand, land left by a melting glacier.
Mission 5

Pioneers on bare rock

Bare rock to woodlandlichenspioneers:weatheringsoil depthmosseshumus fromdead pioneerssoil depthgrasses,fernssoil depthshrubssoil depthdeciduous woodland:climax communitysoil depth
  • Pioneer species colonise first: e.g. lichens, then mosses.
  • Their features: spores spread by wind; survive drought, heat and cold; need almost no soil.
  • Lichens help weather the rock surface.
  • When pioneers die, decomposers turn them into humus.
  • Rock particles + humus = the first thin soil.
Mission 5

Each stage paves the way, then gives way

Bare rock to woodlandlichenspioneers:weatheringsoil depthmosseshumus fromdead pioneerssoil depthgrasses,fernssoil depthshrubssoil depthdeciduous woodland:climax communitysoil depth
  • Deeper soil holds more water and nutrients: the environment is less hostile.
  • New species can now establish: grasses and ferns, then shrubs, then trees.
  • Taller plants shade out the earlier ones.
  • Each stage changes the environment so it suits other species better, and often suits itself less.
  • Say: "the pioneers changed conditions, which allowed other species to establish" β€” not: "pioneers prepare the ground for the next species".
Quick check
?Alder trees colonising ground exposed by a retreating glacier have nitrogen-fixing bacteria in their root nodules. Within decades the soil nitrogen content rises and spruce trees, which cannot grow on the bare ground, replace the alders. Which statement about the cause of this change is correct?
Mission 5

What rises as succession proceeds

  • Soil depth, humus, water and mineral content.
  • Plant size: mosses β†’ shrubs β†’ trees.
  • Primary production (biomass made per mΒ² per year).
  • Species diversity and food-web complexity: more niches.
  • Biodiversity usually rises, but may fall a little at the climax, as a few dominant species outcompete others.
Quick checkRead the data
?Illustrative data.
Surveys were made on land exposed by a retreating glacier 10, 50, 100 and 200 years earlier. Mean plant height was 0.1 m, 3 m, 15 m and 30 m; the number of plant species was 6, 18, 25 and 31; and net primary production (kg m⁻² yr⁻¹) was 0.05, 0.4, 0.9 and 1.2. Soil depth and organic content increased throughout. Which conclusion do the data support?
Mission 5

The climax community

  • Climax community: the final, stable community, in equilibrium with its environment.
  • It persists until a disturbance; its populations still fluctuate.
  • Usually dominated by a few large species. In most of lowland Britain and Ireland: deciduous woodland (e.g. oak).
Mission 5

Succession held back

Succession held backbarrierarrested successiongrazingmowingburningdrainageremove the barrier:succession resumesconservation: keep heathlandor chalk grassland
  • Human activity can stop succession before the climax.
  • Grazing livestock eat tree and shrub seedlings: grassland or moorland persists.
  • Also: mowing, controlled burning, draining wetlands for farming.
  • This is arrested succession. Stop the grazing or the drainage, and succession resumes.
  • Conservation often means managing succession: grazing, mowing or burning keeps heathland or chalk grassland, and the species that need it, from turning into woodland.
Quick check
?Sheep have grazed a hillside for centuries and it is covered by grassland. When grazing was stopped on a fenced plot, shrubs appeared within ten years and young trees within twenty. What does this show?
Mission check

?On a coastal sand-dune system, marram grass covers the young dunes nearest the sea. On older dunes further inland, marram is scarce and the dunes are covered by mosses, low shrubs and other grasses, growing in a thin layer of soil. Which explanation is correct?
Recap

The big ideas

Mission 1

  • Plentiful resources: exponential growth. As resources per individual shrink, births fall and deaths rise until they balance at the carrying capacity.
  • Density-dependent factors (competition, predation, disease) push numbers back towards carrying capacity; density-independent factors (weather) knock them about.

Mission 2

  • Intraspecific competition: same species, identical needs; it levels a population off at carrying capacity and cuts each individual's breeding success.
  • Interspecific competition lowers both species' numbers or excludes one; removing a competitor raises the other to a new, higher plateau.

Mission 3

  • Predator and prey numbers cycle, with the predator peak lagging; predation is density-dependent and lowers the prey's numbers.

Mission 4

  • Sample at random and scale up: quadrats for sessile organisms, transects where conditions change.
  • Motile animals: mark, release, recapture; population β‰ˆ M Γ— N Γ· R, valid only if its assumptions hold.

Mission 5

  • Pioneers colonise bare ground and change it; each stage makes the environment suit other species, until a stable climax community forms.
  • Grazing, mowing, burning or drainage can hold succession back; conservation often manages this deliberately.
πŸ†

Mini-lesson complete!

⭐⭐⭐

You've worked through Genetics, populations and ecosystems (part 3) for AQA A-level Biology. πŸŽ‰

  1. Mission 1Why does a population that doubles again and again eventually stop growing?
  2. Mission 2Why do members of the same species often compete harder with each other than with any other species?
  3. Mission 3How can losing a few otters turn a forest of seaweed into bare rock?
  4. Mission 4How can you know how many snails live in a whole wood without finding every single one?
  5. Mission 5Bare rock can turn into forest without anyone planting a single tree. How does that happen?

Your stars: 0 / 0

πŸ“£ Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

β†’ Back to A-Level Biology Β· AQA