← A-Level Biology · AQA · A-Level Biology revision
⭐ 0
AQA A-level Biology (7402) · 3.1 Biological molecules (part 5 of 5)
Mini-Lesson

Biological molecules (part 5)

5 missions. Guess, learn, then check. Your place is saved.

  1. Mission 1Why does salt vanish into water while oil sits on top in a separate layer?
  2. Mission 2How can weak attractions between molecules hold up an insect and keep a lake's temperature steady?
  3. Mission 3How does water reach the top of the tallest tree with no pump and no energy spent by the tree?
  4. Mission 4Why does a plant lose water fastest on a warm, dry, windy day, and how can you measure it?
  5. Mission 5Why can a shortage of one simple charged particle stop a cell, or a whole plant, from working properly?
Mission 1

Mission 1: Why does salt vanish into water while oil sits on top in a separate layer?

Make a guess: Why does salt vanish into water while oil sits on top in a separate layer?

Mission 1

The medium for life

  • Water is the most abundant molecule in cells: about 70% of a typical cell's mass.
  • Most reactions of life happen in aqueous solution (dissolved in water).
  • Every one of those properties starts with the shape and charges of one small molecule.
Mission 1

A polar molecule

Polar water moleculeOHHshared electron pairδ−δ+δ+104.5°δ+ endδ− endoverall neutral
  • Each O–H bond is covalent: a pair of electrons is shared.
  • Oxygen attracts the shared electrons more strongly than hydrogen does.
  • Unequal sharing makes a polar covalent bond: oxygen is δ−, each hydrogen δ+.
  • The molecule is bent (about 104.5°), so the charges do not cancel. Water is a dipole: a δ− end and a δ+ end.
  • Overall, the molecule is neutral.
  • Say: "partial charges (δ+, δ−)" — not: "water is made of ions".
Mission 1

Hydrogen bonds

Hydrogen bonds between water moleculesOHHOHHOHHOHHOHHδ−δ+δ+δ−δ+δ+δ−δ+δ+δ−δ+δ+δ−δ+δ+covalent bond (within)hydrogen bond (between)
  • The δ+ hydrogen of one molecule is attracted to the δ− oxygen of another molecule: a hydrogen bond.
  • Hydrogen bonds are between molecules. The O–H bonds within a molecule are covalent.
  • Each hydrogen bond is weak, much weaker than a covalent bond. In liquid water they constantly break and re-form.
  • One molecule can hydrogen-bond to up to four neighbours. Millions of weak bonds add up to a strong effect.
  • Say: "hydrogen bond between water molecules" — not: "the hydrogen bond between H and O in the molecule".
Quick check
?Why is each covalent bond between oxygen and hydrogen in a water molecule polar?
Quick check
Model of three water molecules. Each is drawn as an O atom joined by solid lines to two H atoms, in a bent shape. Each OOHHOHHOHHδ−δ−δ−δ+δ+δ+δ+δ+δ+12
?The model shows three water molecules. The symbols δ+ and δ− show partial charges. Which statement correctly describes the interaction labelled 2 in the model?
Mission 1

Why some things dissolve and others don't

Dissolving(a) Ions: hydrophilicOHHOHHOHHOHHNa+OHHOHHOHHOHHCl−O (δ−) faces Na⁺H (δ+) faces Cl⁻arrows: attraction, not hydrogen bonds(b) Polar molecule (glucose): hydrophilicOOHOHOHOHCH2OHOHHOHHOHHOHHH bond(c) Oil: hydrophobicoil (non-polar)OHHOHHOHHOHHOHHOHHOHHOHH
  • Ions (e.g. Na⁺, Cl⁻): water's δ− oxygens face cations; its δ+ hydrogens face anions. Each ion is surrounded by water and separates from the crystal.
  • Polar molecules (e.g. glucose, with many –OH groups): form hydrogen bonds with water.
  • Charged and polar substances are hydrophilic: they dissolve.
  • Non-polar molecules (e.g. oils): no charges to attract water. Water molecules stay hydrogen-bonded to each other and exclude them. They are hydrophobic.
  • Dissolving is physical: molecules stay whole; no covalent bonds break.
  • Say: "ions are attracted to the partial charges of water" — not: "ions form hydrogen bonds with water".
Mission 1

The solvent at work

  • Metabolism: reactants dissolved in the cytoplasm can move and collide. Most enzymes catalyse reactions in aqueous solution.
  • Transport: dissolved substances are carried in a moving stream of water.
  • Animals: blood plasma carries glucose, amino acids, ions and urea.
  • Plants: xylem sap carries mineral ions; phloem sap carries sucrose.
Mission 1

Water as a metabolite

  • A metabolite takes part in metabolic reactions as a reactant or product.
  • Condensation joins two molecules and releases water.
  • Hydrolysis breaks a bond using water.
  • Water is also a reactant in photosynthesis and a product of aerobic respiration.
  • More in an earlier lesson.
Quick check
?Glucose is carried dissolved in blood plasma and in phloem sap, and it is broken down by enzymes in the aqueous cytoplasm. Which property of glucose makes this possible?
Mission check

?In blood plasma, glucose travels freely dissolved. Cholesterol does not: it travels inside lipoprotein particles whose outer surface carries polar and charged groups. Why does cholesterol need this carrier?
Mission 2

Mission 2: How can weak attractions between molecules hold up an insect and keep a lake's temperature steady?

Make a guess: How can weak attractions between molecules hold up an insect and keep a lake's temperature steady?

Mission 2

Cohesion and surface tension

Surface tensionpond skaterwatersurfacetensionzoom insurface molecule: sideways and downinside molecule: all directionscohesion (hydrogen bonds)
  • Cohesion: water molecules attract each other by hydrogen bonds.
  • At the surface, molecules are pulled inwards and sideways, not outwards.
  • Result: surface tension. The surface resists breaking, like a stretched film.
  • A pond skater stands on the surface without breaking it, held up by surface tension: a habitat on the water surface.
  • Say: "cohesion" for water attracted to water — not: for water attracted to anything else.
Mission 2

Pulled up the xylem

Cohesion-tensionxylemair outsidestomaair spacewater vapourtensionpulled uptensionxylemcontinuouswater columnOHHOHHOHH
  • (1) Water evaporates from the walls of leaf cells and diffuses out of the stomata: transpiration.
  • (2) Water is drawn out of the xylem to replace it, through the cell walls. This puts the xylem water under tension.
  • (3) Cohesion keeps the column continuous: hydrogen-bonded molecules are pulled up as one unbroken unit.
  • This is the cohesion–tension mechanism.
  • Xylem vessels are dead. No ATP is used: the energy comes from the Sun evaporating water.
  • Say: "water is pulled up under tension" — not: "water is pushed up from the roots".
Quick check
?Transpiration puts the column of water in a xylem vessel under tension. Why does the column not break as it is pulled upwards?
Mission 2

A temperature buffer

Heat capacity: air and water temperature through a day010203006121824airwaterillustrative dataTemperature / °CTime of day / h
  • Specific heat capacity: energy needed to raise 1 kg by 1 °C. Water: about 4200 J kg⁻¹ °C⁻¹.
  • That is high: about 4 times that of air, per kilogram.
  • Why: much of the energy goes into breaking hydrogen bonds, not into making molecules move faster.
  • So water's temperature changes slowly. Lakes and seas are stable habitats.
  • Bodies are mostly water, so body temperature is buffered too: enzymes stay near their optimum.
  • AQA calls this a relatively high heat capacity, buffering changes in temperature.
  • Say: "temperature changes slowly / stays stable" — not: "water keeps things warm".
Mission 2

Worked example: cooling by evaporation

  • To evaporate, a molecule must break all its hydrogen bonds. That takes a lot of energy.
  • Latent heat of vaporisation at body temperature: about 2400 J g⁻¹.
  • Energy comes from the skin, so the skin cools. Sweating (mammals) and transpiration (plants) use this.
  • Example (illustrative data): a runner must lose 1200 kJ of heat by sweating.
  • Mass of sweat = 1 200 000 J ÷ 2400 J g⁻¹ = 500 g, about half a litre.
  • Compare: warming 1 g of water by 1 °C takes only 4.2 J. Evaporating it takes 2400 J: about 570 times as much.
  • Big cooling effect, little water lost.
Quick check
?(Illustrative data.) Over a clear spring day and night, the air above a lake varies between 2 °C and 18 °C, but the lake water 1 m below the surface stays between 7 °C and 8 °C. Which explanation of the stable water temperature is correct?
Mission check

?In a transpiring tree, an air bubble forms in one xylem vessel and fills a short length of it. Water in that vessel stops rising, although neighbouring vessels keep working. Which explanation is correct?
Mission 3

Mission 3: How does water reach the top of the tallest tree with no pump and no energy spent by the tree?

Make a guess: How does water reach the top of the tallest tree with no pump and no energy spent by the tree?

Mission 3

Transpiration: the price of carbon dioxide

Leaf gas exchange and water lossair spaceevaporationfrom cell wallsstomaCO2 diffuses inwater vapourdiffuses out
  • Stomata open to let carbon dioxide in for photosynthesis.
  • Water evaporates from the walls of mesophyll cells into the air spaces.
  • Water vapour diffuses out through the open stomata: transpiration.
  • Transpiration is an unavoidable consequence of gas exchange.
  • Say: "water vapour diffuses out while stomata are open" — not: "the plant opens stomata to lose water".
Quick check
?Why is transpiration described as a consequence of gas exchange rather than as a process the leaf carries out for its own sake?
Mission 3

Xylem vessels: built for flow

Xylem vesselno contentsno end wallslignin:resists tensionpits: water inand out sideways
  • Xylem carries water and mineral ions from roots to leaves.
  • Dead cells, no contents: nothing obstructs the flow.
  • End walls lost: cells join into one continuous tube.
  • Lignified walls: rigid, so the vessel does not collapse under tension; also waterproof, and support the plant.
  • Pits: gaps in the lignin. Water moves sideways between vessels and out to leaf cells.
  • Say: "lignin stops the vessel collapsing under tension" — not: "lignin is only for support".
Quick check
?Why are the walls of xylem vessels thickened with lignin?
Mission 3

Cohesion–tension: pulled from the top

Cohesion–tensionwater drawn fromxylem throughcell wallsevaporation fromcell wallstensiontranspirationstreamcohesionadhesion
  • (1) Water evaporates from leaf cell walls. Water is drawn out of the xylem, through the cell walls, to replace it.
  • (2) This puts the xylem water under tension.
  • (3) Cohesion: hydrogen bonds hold water molecules together, so the whole column is pulled up unbroken.
  • Adhesion: water is attracted to the hydrophilic vessel walls, which helps it creep up narrow spaces.
  • The flow from roots to leaves is the transpiration stream.
  • Passive: no ATP. The energy comes from the Sun evaporating water.
  • Evidence: tree trunks shrink slightly in diameter at midday; cut xylem draws air in, not water out.
  • Say: "water is pulled up under tension" — not: "the roots pump water up".
Quick check
?What generates the force that draws water up the xylem from the roots to the leaves?
Mission check

?Florists cut the stems of fresh flowers under water. A stem cut in air and then put in a vase often wilts, even though its cut end is in water. Which explanation is correct?
Mission 4

Mission 4: Why does a plant lose water fastest on a warm, dry, windy day, and how can you measure it?

Make a guess: Why does a plant lose water fastest on a warm, dry, windy day, and how can you measure it?

Mission 4

Four outside factors

Four outside factorslight intensity ↑rate ↑temperature ↑rate ↑humidity ↑rate ↓air movement ↑rate ↑blue shading: water vapour
  • Transpiration rate depends on the water-vapour gradient from air spaces to air, and on how open the stomata are.
Factor risesRateWhy
Light intensity↑stomata open wider
Temperature↑faster evaporation and diffusion; warm air holds more vapour, so the gradient is steeper
Humidity↓less steep gradient
Air movement↑humid air next to the leaf is blown away; gradient steeper
  • Say: "humid air reduces the water-vapour gradient" — not: "humid air makes the leaf wetter, so it loses more".
Quick check
?Illustrative data. A potometer was used to estimate transpiration by a leafy shoot at 20 °C. Water uptake in still air was 0.8 cm³ per hour; with a fan blowing air across the leaves, 1.9 cm³ per hour; in still air with a clear plastic bag enclosing the shoot, 0.3 cm³ per hour. Which conclusion is supported by these results?
Mission 4Practical

The potometer

Potometerbubble moves towardsthe shootleafy shootbung sealed withpetroleum jellywater-filled tubingair bubblecapillary tubereservoirtapscale (mm)cut underwater
  • Skills: use a potometer to investigate a named environmental variable.
  • Cut the shoot under water, at a slant. Fit it to the potometer under water: no air gaps.
  • Seal joints with petroleum jelly. Dry the leaves. Let the shoot settle for 5 minutes.
  • Let in one air bubble. Time how far it moves along the scale. Reset it from the reservoir. Repeat; take a mean.
  • Change one factor (e.g. fan, lamp distance). Keep the others, and the same shoot, constant.
  • Say: "a potometer measures water uptake" — not: "water loss". A little water is used in photosynthesis or kept in cells.
Mission 4

Worked example: rate from the bubble

Illustrative data: capillary radius 0.50 mm; bubble moves 45 mm in 5.0 min.

  • Water taken up = volume of a cylinder = πr²l.
  • = π × (0.50 mm)² × 45 mm = 35 mm³.
  • Rate = 35 mm³ ÷ 5.0 min = 7.1 mm³ min⁻¹.
  • To compare shoots, divide by leaf area (trace leaves on squared paper).
Quick check
?In a potometer, the capillary tube has a radius of 0.40 mm. The air bubble moves 30 mm in 10 minutes. What is the rate of water uptake?
Mission check

?A grower's greenhouse plants wilt on hot afternoons. The grower wants to slow their transpiration. Which change would do this?
Mission 5

Mission 5: Why can a shortage of one simple charged particle stop a cell, or a whole plant, from working properly?

Make a guess: Why can a shortage of one simple charged particle stop a cell, or a whole plant, from working properly?

Mission 5

Ions: small, charged, specific

  • An ion is an atom, or a group of atoms, with an electric charge.
  • Cation: positive, e.g. Na⁺. Anion: negative, e.g. Cl⁻.
  • Inorganic ions dissolve in water: cytoplasm, blood, tissue fluid, plant sap.
  • Some are at high concentrations; others at very low concentrations.
  • Each type of ion has a specific role, set by its properties: its charge, its size, what it binds to.
  • One ion cannot stand in for another.
Mission 5

Four ions, four jobs

Four jobsH+ and enzymesH+014pHmore H+Fe2+ in haem4 haemsFe2+haemO2Na+ and glucoselumencellNa+ + glucose inPhosphateDNA, RNAATP
  • H⁺: the more H⁺, the lower the pH. pH changes the charges on proteins, so enzymes can denature.
  • Iron ions (Fe²⁺): one at the centre of each haem group in haemoglobin. Each haem binds one oxygen molecule.
  • Na⁺: co-transport of glucose and amino acids into cells lining the ileum.
  • Phosphate (PO4³⁻): part of DNA, RNA and ATP.
Quick check
?A person's diet contains too little iron. Which is the most likely direct effect?
Quick check
?Which molecules need phosphate ions to be built?
Mission check

?Chlorophyll has a magnesium ion at its centre. Haem, in haemoglobin, has an iron ion at its centre. Both ions carry a 2+ charge. A plant short of magnesium is given extra iron ions instead. What happens to its yellowing leaves?
Recap

The big ideas

Mission 1

  • Unequal sharing of electrons makes water polar (δ− O, δ+ H); hydrogen bonds form between molecules.
  • Charged and polar substances dissolve (hydrophilic); non-polar ones are excluded (hydrophobic). That makes water the medium for metabolism and transport.

Mission 2

  • Hydrogen bonds give cohesion (surface tension; unbroken xylem columns) and a high specific heat capacity (stable temperatures).
  • Evaporation must break hydrogen bonds: a large cooling effect for little water lost.

Mission 3

  • Xylem vessels are dead, hollow, lignified tubes with pits: a continuous path that does not collapse under tension.
  • Evaporation from leaves puts the xylem under tension; cohesion pulls the whole column up. No ATP is spent.

Mission 4

  • Light, temperature and air movement raise transpiration; humidity lowers it. All act through stomatal opening or the water-vapour gradient.
  • A potometer measures water uptake: volume = πr²l, then divide by time.

Mission 5

  • Each inorganic ion has a specific role that no other ion can fill.
  • H⁺ sets pH; iron ions in haemoglobin carry oxygen; Na⁺ drives co-transport of glucose and amino acids; phosphate is part of DNA, RNA and ATP.
🏆

Mini-lesson complete!

⭐⭐⭐

You've worked through Biological molecules (part 5) for AQA A-level Biology. 🎉

  1. Mission 1Why does salt vanish into water while oil sits on top in a separate layer?
  2. Mission 2How can weak attractions between molecules hold up an insect and keep a lake's temperature steady?
  3. Mission 3How does water reach the top of the tallest tree with no pump and no energy spent by the tree?
  4. Mission 4Why does a plant lose water fastest on a warm, dry, windy day, and how can you measure it?
  5. Mission 5Why can a shortage of one simple charged particle stop a cell, or a whole plant, from working properly?

Your stars: 0 / 0

📣 Smashed it? Share your score

Challenge a friend to beat your stars, or show a parent how you got on.

→ Back to A-Level Biology · AQA